Server :: Change The Webroot Of The Httpd Server - Directory Doesn't Exist - CentOS 5
Jun 1, 2009
I have just configured CentOS server my new office. This is the first time I am using CentOS.
Whenever I am trying to change the webroot of the httpd server, it usually say "directory doesn't exist". whereas which can't be the case as it is home directory of the user.
To achieve this, what Do I need to do?
The second issue, I am facing that whenever I am adding new directories to public_html folder, it is not accessible. as the error page 404 is shown. I have changed the permissions to 0705 and ownership is also transferred to other user. What else is required to make new directories accessible by the web?
For the first time in installed and configured centos-ds from this HowTos and from the manuals.It is running nicely but disabled my httpd.Is it not possible to run directory service and httpd in the same machine
One of our client having issue with the qmail. The issue is if any one send email to firstname.lastname@example.org (email@example.com the email address which is not exist) it should send failure notification i.e."email does not exist" to the sender. The qmail server is not notifying that email address does not exist.
I'm running Mandriva 2010.0 as a web server, i had 2 HDD in the erver. i dedicate 1 HDD just for LOGS and system backup (160 GB). i would like to change the log destionation directory from /var/log/httpd (defaults) into /backup/log/httpd how can i do that.? coz i couldn,t find the configuration in the webmin. that log would be useful for webalizer/awffull statistic in several days ahead.
I'm taking over as a Linux admin where they use sendmail last week. I've done very little with email on linux, and haven;'t touched sendmail since 2000 so I am really out of my element.Basically the sendmail server for many months has had performance problems, disk, and load.Looking into it I found this doing a tail on /var/log/MaillogAug 25 17:11:49 web8 sendmail: o7OGF2VH002566: to=postmaster, delay=1+01:58:10, xdelay=00:00:00, mailer=relay, pri=2388694, relay=[xx.xx.xx.xx], dsn=4.0.0, stat=Deferred: [10.10.20.107]:No route to hostAnd that was all it was spewing, I edited the config files because xx.xx.xx.xx doesn't exist. And running m4, then restarting sendmail.It is still spewing out that message, but I do see some things connecting to the new yy.yy.yy.yy address. I even greped the entire /etc looking for the old machine.
Does anyone know how to write this command for mysql version 4? (The command is for mysql version 5, I guess since when I check database in mysql server version4 there is no database name information_schema ) command:select concat(table_schema,'.',table_name) as table_name,table_rows from information_schema.tables where table_rows > 1000000 order by table_rows desc; meaning:show all database,table name and row count from all databases that has table row more than 1000000
Run result with mysql version 5: mysql> select concat(table_schema,'.',table_name) as table_name,table_rows from information_schema.tables where table_rows > 1000000 order by table_rows desc;
Recently I got a very rare database issue, it says: Error: Couldn't read status information for table clients_copy () mysqldump: Couldn't execute 'show create table `clients_copy`': Table 'adm_retail.clients_copy' doesn't exist (1146) Error: Couldn't read status information for table dt_mx_emp ()
I'd like to share /usr/share/docs out to my local subnet via httpd so I can read server documentation from my workstation. I've simply done a generic install of httpd and httpd-manual and added this to the bottom of my httpd.conf file:
alias /docs /usr/share/doc <Directory /usr/share/doc> Order deny,allow
I just upgraded to CentOS 5.6 (been on 5.2 for ages....) and am getting the following error in the apache error_log file:[Sat Jul 02 13:50:25 2011] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)[Sat Jul 02 13:50:25 2011] [error] SSL Library Error: -8187 Security library: invalid argumentsThe notice entry, I can understand, however the SSL error is halting apache from starting. It has been suggested that this might be a package mismatch issue. I'll be more than happy sharing the package list for this box on request.
We had servers that worked fine for years. After updated them to the latest version of CentOS (5.2 with latest updates), they keeps on hanging when being scanned by PCI Verdors (a Credit Card security standard). Basically, the scan causes httpd process to eat up all memory, and the server becomes unresponsive. Normal operations resume after the scan stops for 5, 10 minutes. Output from top looks like the following:
I have a VPS server installed with centos 5.3. The server has directadmin. Probably that when directadmin was installed, the httpd server of choice was apache 2.2.13.
My problem is that i whant to install mod_dav_svn trough yum but without updating the latest version of apache form yum repository. If i exclude the httpd package when doing yum install mod_dav mod_dav_svn i get a dependency error witch say that i nedd httpd-mmn installed. So, my question is, how can i use yum to install mod_dav_svn without updating the httpd.
I installed centos 5.5 and httpd service was working well for the last 2 weeks till yesterday. I restarted server and noted my hosting service were not working. I have tried service httpd restart on the terminal and it dispalys [FAILED]. I updated my machine and and have tried restarting it but it doesn't work. I am new to centos and I dont know how to solve this.
I've got a box with a fresh installation of CentOS 5.6, but had several configs copied from an old 4.8 box that I've now got to finish. Most everything seems fine, but I can't get apache running. It reports that it starts up fine, but immediately stops and reports "httpd dead but subsys locked"Most of the advice I've found while searching suggests to just delete the http.pid file and restart, which doesn't help in my case. I did find a few problems where SELinux was restricting httpd from creating or touching certain files (I found reports in /var/log/messages) but I've worked through that.
So the big question here is: /var/log/messages and /var/log/httpd/error_log are now empty, and don't show any more errors when I restart httpd. Does anyone know where else I can look for reporting/logging on what's happening to httpd to cause it to die?
I've added httpd to runlevels 2-5 using chkconfig, and also double checked it using ntsysv, but it still won't run on startup, even though it works just fine when started manually (using "sudo service httpd start").The results of "chkconfig --list httpd" show it is on for levels 2-5, and I've confirmed the current runlevel to be 3. I've found no errors in the logs (neither Apache's nor the system's), but maybe I'm looking at them wrong...My machine is a VPS (on VMWare) running CentOS 5.5 32bit. For additional information, see the output of getinfo.sh: http://pastebin.centos.org/35570I would greatly appreciate help on this, as it is delaying our NGO from moving servers.
I am running centos 5.4, kernel 2.6.18. Also running httpd (apache2) as a reverse proxy with the following modules mod_ssl mod_cache mod_proxy_*
Recently after updating these modules: mod_ssl x86_64 1:2.2.3-31.el5.centos.2 httpd x86_64 2.2.3-31.el5.centos.2 distcache x86_64 1.4.5-14.1
I am getting wierd errors in the error logs: [Wed Feb 10 15:44:18 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data [Wed Feb 10 15:44:45 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data [Wed Feb 10 15:44:48 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data .....
I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.
When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.
Basicly just installed a fresh version of Cent OS 5.4 with apache httpd installed automaticly during the installation. The http daemon is running and when navigating to localhost i get the welcome cent os apache page thingy. The problem is when i put an index.html file in /var/http/www then try and navigation to localhost I get a 403 forbidden error.
I have just been told that httpd was not running on my Centos virtual server. It seems that my hosting company rebooted my server 2 days ago and that httpd restart failed due to:
Starting httpd: httpd: Syntax error on line 213 of /etc/httpd/conf/httpd.conf: Syntax error on line 2 of /etc/httpd/conf.d/proxy_ajp.conf: Cannot load /etc/httpd/modules/mod_proxy_ajp.so into server: /etc/httpd/modules/mod_proxy_ajp.so: undefined symbol: proxy_module
I had worked around and forgotten about this some time ago. The problem arose because the most recent httpd update installed proxy_ajp.conf into /etc/httpd/conf.d which was then loaded on restart The trouble is I do not use mod_proxy (I think just to try and get a lean and mean web server) and proxy_ajp.conf does not check if mod_proxy is loaded before it tries to LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
Hence httpd fails to restart. RedHats's bug tracker lists this as an old issue (which was never resolved) [URL] My workaround was to rename proxy_ajp.conf to proxy_ajp.conf.orig so that httpd would start up correctly. However any updates simply reinstall proxy_ajp.conf and so IMO the problem needs to be resolved at source. how to ensure that httpd updates do not bite me in the future? Do I really have to run mod_proxy whether or not I need it?
Is it possible to have Archive Manager create the specified folder when I enter it into the path field? Like if I want to put something in "/Main/Sub1/Sub2" But "sub2" doesn't exist, can I just have Archive Manager create it and put the files there?