Server :: MySQL - PhpMyAdmin ?
Aug 22, 2010
I have 2 Servers
Server A running apache, php, phpmyadmin
Sever B running MySQL
Server A has IP of 192.168.1.110
Server B has IP of 192.168.1.120
I edited /etc/phpmyadmin/config.inc.php
To have these:
(This par was confusing to I just re-added the line above instead of searching for it all).
Then I set the MySQL vi /etc/mysql/my.cnf to comment out #bind-address = 127.0.0.1
There is another line that most of the guides asked me to comment out but I cannot find that like: # skip-networking
The Next closest match to that is: skip-external-locking
I will assume that is not it and leave it alone....
I keep getting errors for example: "Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly"
Another error was it canno connect because it is not accepting connections from the IP Address of my webserver...
View 2 Replies
ADVERTISEMENT
Aug 22, 2010
I been going off old outdate guides and informaion around the internet and nothing is working
I have 2 Servers
Server A running apache, php, phpmyadmin
Sever B running MySQL
Server A has IP of 192.168.1.110
Server B has IP of 192.168.1.120
[Code]...
(This par was confusing to I just re-added the line above instead of searching for it all).
Then I set the MySQL vi /etc/mysql/my.cnf to comment out #bind-address = 127.0.0.1 There is another line that most of the guides asked me to comment out but I cannot find that like: # skip-networking
The Next closest match to that is: skip-external-locking
I will assume that is not it and leave it alone....
I keep getting errors for example: "Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly"
Another error was it canno connect because it is not accepting connections from the IP Address of my webserver..
View 2 Replies
View Related
Jul 23, 2010
My phpmyadmin stopped working. I reinstalled it and it gives error #2002. I found that this error is from mysql, which i couldn't repair and i begin to reinstall it. First I was with Debian 5.03, but i played with /etc/apt/sources.list and after upgrading
I have now 5.05
The problem is that when i install mysql-server a dependency appear in mysql-server-5.0. I follow this instructions[url] and after sudo apt-get install mysql-server mysql-client
I get this error:
Code:
How can i fix this dependency? I didn't find anything relative in google.
mysql-server-5.0 --configure gives error: command not found
I uninstalled all related with mysql and execute dpkg --purge mysql-server then reboot and run first apt-get install mysql-server-5.0 mysql-client-5.0 and then apt-get install mysql-server mysql-client There was no error
Code:
But there was another error when run mysql -u root -p
Code:
View 2 Replies
View Related
Sep 18, 2010
Summary: Does a discrepancy between MySQL client library 5.0.x and MySQL server of 5.1.50 cause "inconsistent behavior", as reported by phpMyAdmin? The longer version: Windows Sysadmin taking the plunge into Linux. I tried to spare you all the rookie questions and did a fair bit of reading. I'm rather happy I was able to get CentOS 5.5 installed and running, configured iptables, got the kernel updated, Apache, MySQL and PHP installed. Then upgraded PHP to 5.2 after I figured out how repos and priorities work.
I got phpMyAdmin installed and running, then decided to upgrade from 2.11 to 3.3.7 but it keeps complaining that my MySQL client libraries are something like 5.0.63, while my server is 5.1.50, and this may cause "inconsistent behavior" or something of the like. So, feeling industrious, I decided to find an updated client.
MySQL-client-community-5.1.50-1.rhel5.i386.rpm
But it wouldn't let me install it as it conflicted with the default mysql-server installation. I also couldn't remove just the old client, to update to a newer one. So I blew away everything mysql on my server and installed the above client
MySQL-server-community-5.1.50-1.rhel5.i386.rpm
and that server file. I'm assuming I'm missing dependencies now as phpMyAdmin claims it can't load the mysql extension. Attempting to 'yum' php-mysql tried to install 'mysql' as a dependency, which immediately conflicted with the files I'd installed. At this point I'm wondering if I'm closing in on successfully installing a version that phpMyAdmin doesn't complain about, or if I should even care that it is complaining and just go back to all the repo versions of everything.
# rpm -e MySQL-shared-community-5.1.50-1.rhel5.i386.rpm
error: package MySQL-shared-community-5.1.50-1.rhel5.i386.rpm is not installed
View 4 Replies
View Related
Jul 29, 2011
The original issue started when i couldnt login to phpmyadmin. I noticed an error when installing it and when trying to login, my credentials that I supplied upon install failed. After ages of messing around trying to reset I decided to try and uninstall phpmyadmin and MySQL and start again. This has produced more issues as I uninstalled MySQL first and phpmyadmin asks for credentials that are in a database, which I have already deleted. This causes major issues trying to uninstall it. Anyway, I have used all these commands:
sudo apt-get remove phpmyadmin
sudo apt-get remove mysql-server
sudo apt-get remove mysql-common
Now I am trying to install everything again but having erros. This is what I have so far:
Code:
root@ks358041:/var/lib/php5# sudo apt-get install mysql-server-5.1
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
View 8 Replies
View Related
Feb 1, 2010
I'm totally new to MySQL / PHPAdmin and have been dropped in at the deep end regarding getting MySQL and phpMyAdmin upgraded... When I look at the RPM's I see:
php-mysql-4.2.2-17.2
php-4.2.2-17.2
php-imap-4.2.2-17.2
php-ldap-4.2.2-17.2
But when I go to the GUI I see: Welcome to phpMyAdmin 2.5.7-pl1 MySQL 4.0.16-standard-log running on localhost as root@localhost So to start with I'm not totally sure what version I'm running! I need to get these upgrades done due to PCI requirements so they are saying to upgrade to at least 4.0.25 I'm currently running RedHat9 so ideally need to know the easiest way to upgrade to a later 4.0 or 4.1 version.
View 6 Replies
View Related
Aug 30, 2010
I have a centos 5.5 machine. First I upgraded my php to php 5.3. So I was then installing phpMyAdmin so I just put the whole folder into my /var/www/html/phpMyAdmin.The I tried to run my phpMyAdmin and I got this error Cannot load mysql extension. Then I uinstall my mysql db and reinstall it. Again it show me the same error.For addition info via the php info page for the Configure Command I saw this option -without-mysql' .
View 5 Replies
View Related
Jan 3, 2011
One server is a dedicated MySQL server. After upgrading that one to Ubuntu 10.04 (from an ancient Suse 9.2), both servers are running Ubuntu 10.04 LTS.I have another server that I use to administer the database server via phpMyAdmin. However since the upgrade it is not able to connect. I get an error #1130 Cannot log in to the MySQL server. The same happens if I try to connect remotely from the command line with: mysql -u root -h 129.79.137.121 -pI'm not sure if this is an iptables/ports problem or a configuration problem on the MySQL end or something else entirely.I've searched and tried the suggestions I've found in various places but none seems to have fixed it.
View 2 Replies
View Related
Apr 13, 2011
How do I connect to the MySQL server using phpmyadmin?It's asking me for a username and password and I was not asked for a root password when I installed MySQL (unlike in Windows).I tried no password, I tried root as a password, I tried$ mysqladmin -u root -p blahEnter password: mysqladmin: connect to server at 'localhost' failederror: 'Access denied for user 'root'@'localhost' (using password: YES)'Nothing I've tried is working obviously.Why does this have to be so stupid? Why couldn't MySQL ask me what password I want to use?
View 2 Replies
View Related
Oct 3, 2010
So the problem is that phpMyAdmin does not want to connect to host name (at remote server) but connects to that same server fine if it's ip address is used. Command line "mysql -h hostname ..." works fine and connects to host name. Mysqladmin also works.
it's giving error:
*****
Error
MySQL said:
#2005 - Unknown MySQL server host 'host.name' (2)
******
I've disabled SElinux and temporarily disabled Iptables but no luck.
Somehow I feel MySQL is not doing DNS lookup when used by Apache/PHP. So it just understands ip addresses.
I found that on MySQL startup you can disable DNS lookup. [URL]
Not sure if it's disabled and how to enable it at startup. Could not find anything at "System" -> "Administration" -> "Services".
Here is similar case with no solution [URL]
View 1 Replies
View Related
Apr 27, 2010
I am running Ubuntu 9.10 with Apache, phpMyAdmin and MySQL. Normally phpMyAdmin loads properly, but the other day I created a large database of 6,000+ tables and 1.3 GB of data in the entire database. Now phpMyAdmin loads and shows my different databases, but if I try to open the new large database, it just loads a white page with no content. Does anyone know if I can reconfigure my server so it will be able to show parts of the database?
View 2 Replies
View Related
May 4, 2010
I am at work right now and noticed my blog is down because of a database connection error. phpmyadmin wont load either it says theres an error, and webmin wont load either. So what would cause a mysql to go down? a hack or update? i am running ten.o four ubuntu server.
View 3 Replies
View Related
Nov 15, 2010
I just install Ubuntu on a new computer I got, and set up LAMP. I started poking around in MySQL (more than I should have) and managed to break it. I've been trying to fix it, but I can't. I've done apt-get --purge mysql-client, but when I reinstall it it's the same thing. How can I reinstall MySQL (and PHPmyadmin) from a completely clean slate? (There's no important data on there)
View 1 Replies
View Related
Dec 29, 2008
After a new install of Slackware 12.2, I carried out the following procedures to get everything working successfully right out of the box. The server is a standalone system, used for testing and educational purposes, so please bear that in mind. NB: Throughout this post when you see a single # at the start of a line it means you are typing the commands as root user. You should not include the #, only the text after it.
### setup Apache with php enabled
Login as root user on your Slackware box and type:
# pico -w /etc/httpd/httpd.conf
[code].....
View 18 Replies
View Related
May 13, 2010
I have installed on a remote server phpmyadmin 3.3.1 and mysql 5.1.46 on a centos 5.4 OS.
Any newly created user with phamyadmin is unable to login both from mysql command line (from localhost) and phpmyadmin (localhost and remotely).
No prob when the user is created with mysql command line (from localhost). All of the users created with phpmyadmin, are not "visible" recognized from the show user command via the mysql command line. The setting I used when I create any user was the same as the ones with the mysql command line creation.
The error message I get when accessing from mysql command line (from localhost) is the following: "Access denied for user ... @localhost (using password: yes)"
View 2 Replies
View Related
Dec 25, 2010
What commands can be used to install software such as "phpMyAdmin" to Fedora? As I am setting up Apache in Fedora. How to install "phpMyAdmin" and setup phpMyAdmin, so that I can use internet explorer to manage the phpMyAdmin to configure the MySQL database remotely.
View 2 Replies
View Related
Jun 7, 2011
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
View 6 Replies
View Related
Jun 2, 2010
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
View 9 Replies
View Related
Feb 9, 2011
I have installed debian on my laptop and included during the installation the webserver version. Now I want to develop a page locally to test it before I put it on the web. I first had an old reflex, jumping straight away and installing xampp. But then I thought that I already all that it takes as I installed the webserver feature of debian. I installed phpmyadmin ( with the command #apt-get install phpmyadmin) as to be able to create and attribute databases but when I try to log in I have the following message:
"Error
#2002 - The server is not responding (or the local MySQL server's socket is not correctly configured)"
I googled but I cannot find the mysql.conf (I searched using "find") but with no result. It is all very blury what is going on with this webserver option running on my laptop...
View 9 Replies
View Related
Oct 25, 2010
Im using CentOs on a remote server. I've recently installed phpmyadmin but cant access from [URL] I checked the files and found only 3 folders in /var/lib/phpmyadmin -config / save / upload - all of them empty. Whenever I try intstall phpmyadmin again it just says its already installed and up to day.
View 2 Replies
View Related
Dec 20, 2010
Setup - PmaWiki tells me that for some reason openSUSE does not support the setupscript.
I have been following the The Perfect Server - OpenSUSE 11.3 x86_64 [ISPConfig 3] | HowtoForge - Linux Howtos and Tutorials but used for i586. Everything works fine, except i am not able to find a way to set a password to be checked by dovecot/pam, to enter a mailbox via squirrelmail. The args are set, but i simply can not find out where to set the password and username.
The password set in ISPConfig does not apply to the squirrelmail login for dovecot.
The general idea than was to get phpMyAdmin running, and set up passwords there...(i do not even know if that is going to work, but get phpMyAdmin to work would not be bad at all..)
So, to know how to set a password/username in/for dovecot would be fine also... (i've read all the wikipages like: AuthDatabase/PasswdFile - Dovecot Wiki but now i still do not know where and how to set them.
View 8 Replies
View Related
Aug 15, 2009
I configured mysql in RHEL5.1 and I tested it , it workks well, but I wish to exploit it in graphical mode. Can you assist me to implement the phpMyAdmin for me to use it in graphical mode?
View 4 Replies
View Related
Jun 19, 2011
I installed phpmyadmin and when I tried to access it, it said:
[code]...
View 1 Replies
View Related
Jun 17, 2010
I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
View 1 Replies
View Related
Aug 25, 2010
I'm having problems connecting to the mysql database on my system. I first noticed this when I was trying to set up the program anymeal. I subsequently tried using MySQL Administrator (mysql-admin), but had no luck. It gives my the following feedback:
Code:
Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Click the 'Ping' button to see if there is a networking problem. I press the ping button, and it seems to connect.
Code:
View 4 Replies
View Related
Feb 22, 2011
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14
View 7 Replies
View Related
Aug 2, 2010
I'm trying to setup wordpress on my server, which of course I need mysql for. I setup a database the other day, which worked perfectly, but I had to start again as I put some information in wrong. Now, I can create a database fine, but when I run
Code:
GRANT ALL ON wordpress.* TO wordpress@localhost IDENTIFIED BY "password";
I get the output:
[code]...
View 13 Replies
View Related
Jun 4, 2009
I have MySQL 5.1.34 and PHP 5.1.6 installed on my system, how do I install php-mysql? Each time I try, it says
mysql-5.0.45-7.el5.i386 from base has depsolving problems
-- > mysql conflicts with mysql-server-community
error: mysql conflicts with mysql-server-community
View 16 Replies
View Related
Jun 11, 2011
I seem to have a working install of Ubuntu Server 11.04 (Samba running without issue on same machine). The lamp stack seems to be running fine as well. (Apache index.html page works, phpinfo() works, mysql works from the mysql command line.) I have installed phpmyadmin. After install I had to reboot the server (restarting Apache still said error in PHP and couldn't start). After reboot, the welcome screen comes up, but using root with password doesn't work. Using an admin user that I created with privileges in *.* doesn't work either. There are no errors on the screen, it just simply loops back to the beginning screen.
There is an error in apache2 error.log saying that it can't find the page [URL] which seems strange because you can bring up the welcome page, you just can't log into phpmyadmin with any of the created users that I made from the mysql commandline. I don't see any php errors in syslog (which is where the php errors are being directed) except a notice that CRON is running for some purpose for PHP.
View 6 Replies
View Related
Mar 19, 2010
I have install apache,php,mysql and then I have installed the phpmyadmin by issueing the command in terminal sudo apt-get install phpmyadmin
After this ,in my web brower i type... localhost/phpmyadmin ,it give the error message "Not Found
The requested URL /phpMyAdmin was not found on this server. Apache/2.2.12 (Ubuntu) Server at localhost Port 80"
View 8 Replies
View Related
