Server :: Local Master Browser Do Not Sync Their List With The Domain Master

Nov 13, 2009

I'm managing a residential network. Each flat is its own subnet, and can only communicate with the other flats through a router (i.e. no broadcast). 95% of these 300 subnets only contains windows computers (from lambda users).

My final goal is to be able to browse the entire network from any computer.

I set up a samba server acting as a wins server, and every computer is aware of it because it is registered in the dhcp. So name resolution is working fine for everyone.

The same samba server is set to be the "Domain master browser":

workgroup = WORKGROUP
wins support = yes
prefered master = yes
local master = yes
domain master = yes
os level = 65

When I browse the network (using "net view" or "browstat view"), I can only see the servers which are in the same subnet as the domain master browser.

Now, when in a subnet the computers arrange themselves to find a "local master browser", the only visible computers are the one in that subnet.

What I don't understand is why all the local masters don't synchronize their lists with the domain master.

So, to sum up, every subnet get the following behaviour:

-if a local master is elected, the only visible computers are the one in the same subnet.

-if no local master is elected, the only visible computers are the one in the subnet of the domain master.

-if I add another samba, configured as a local master winning all elections, then the magic is working and the lists are synchronized.

What is expected:
-every computer can see all the computer from all the subnets.

View 1 Replies


ADVERTISEMENT

Server :: Setup Master / Master Mysql In HA Setup Without Use Of Load Balancer Provided By Host?

Mar 31, 2010

I have a load balancer with 2 web servers behind it. The web servers rsync with cloud storage to update their apache directories 1 time every hour. Apache is just running php pages that pull/push data to a DB so they dont need to be updated that often. However I need to figure out how to implement a Master/Master MySQL setup to have my web servers point to for the PHP stuff. I need to implement it without having a single point of failure. The Load balancers are useless for failover as they only detect availability based on Ping request. So putting a master/master setup behind a Load Balancer is out. what is the best way to setup the master/master mysql in a HA setup without the use of a load balancer provided by the host?

View 2 Replies View Related

General :: Ypbind To NIS Master Server?

Mar 25, 2010

Problem: This morning, our NIS master server down (due to ram prob), and what happen is all the sun servers able to bind to NIS Slave, able to communicate to other sun and windows servers but not Linux servers.

Detailed Problem: sun_server[sab]% rsh linux01 o_ypcall: clnt_call: RPC: Unable to receive; errno = No route to host sun_server[sab]% telnet linux01
Trying 10.x.x.x...
Connected to linux01.
Escape character is '^]'.

[Code]...

View 1 Replies View Related

General :: Master And Slave DNS Server Replication

Nov 29, 2010

I configured a master DNS server 192.168.2.10 working OK. After that I configure a DNS Slave Server (92.168.2.11)the initial replication worked fine. This is test environment for my certification. I see how the zones from my master are transferred
zones in Master
training.com.db
transferred zone to my slave when I started named service
sec.training.com.db

That's Ok but I added some IPs to resolve to my master zone
webserver IN A 192.168.2.30
fileserver IN A 192.168.2.31

I restart/reload named on master and after that I go to slave and restart/reload but zones wuth the new values are not replicated. How long does it take for slave to take the changes from master? how is the procedure manual or automatic? I see If I go to slave and delete sec.training.com and restart named the zone with the changes is transferred but that is very manual... I am including my DNS Configuration so you can take a look.

View 4 Replies View Related

Server :: Bind Views With Master And Slave

Apr 12, 2011

I have bind configured with Internal and External views, but the slave server is transferring only the Internal zone files for both Internal and External - a diff shows no difference, and the log shows the same serial number.What am I missing in the config so the slave server properly receives updates from the master for both views?

View 2 Replies View Related

Server :: Disabling MD5 Passwords In Centos NIS Master?

Apr 2, 2010

I have a Centos NIS server that is working fine with other linux clients. i need to have a Solaris 8 client bind to the NIS domain and found out that Sol8 does not support MD5 format passwords that the NIS master is generating. so i am trying to disable the MD5 encryption on the nis master and it does not seem to work. i run this command

authconfig --disablemd5 --enablenis --nisdomain=lab --updateall

and it restarts portmap and nis services ok. on the master server i then do a yppasswd username and a make passwd and it still uses the 34 char password format. what do i need to do to disable MD5 passwords in a centos nis server?

View 2 Replies View Related

CentOS 5 Server :: DNS Not Replicating From Master To Slave?

Jan 27, 2010

I have set up a master BIND DNS server with 2 slaves. All the services start up fine on all 3 servers, but zones and named.conf info is not being replicated. The 3 servers are tentatively installed on a Xen virtual server for testing purposes. All 3 servers are 64bit and installed with: -> CentOS release 5.4 (Final) - 2.6.18-164.10.1.el5xen -> BIND 9.3.6-P1-RedHat-9.3.6-4.P1.el5_4.2

All 3 servers are fully updated. All 3 servers have static IP addresses. The services on all 3 servers start up without any apparent issues. Master server: # /etc/init.d/named restart ; tail -f /var/log/messages

[Code]...

View 10 Replies View Related

CentOS 5 Server :: BIND Notify From Non-master?

Aug 26, 2011

I have setup two BIND9 servers as slaves for an internal Windows domain. I receive messages in my logs about a Windows server not being the master for the slave domain on BIND. I have placed the allow-notify statement in the global options section of named.conf, as well as setting the IP address in the masters section of the zone. I'm confused as to why I'm still getting this error message.

View 3 Replies View Related

Server :: Distribute Securenets File From NIS Master To Slave?

Jan 25, 2011

I have a large environment with many VLANs and NIS slaves serving the VLANs. Previously we have not used a securenets file (don't worry; we don't use NIS for passwords, just NFS maps), but I'd like to start. The number of NIS slaves makes it annoying to update a securenets file on each when we add a new VLAN. Is there a way to propagate the securenets file to each slave when I update it on the master?If not, I guess I can live with propagating the file once and only visiting new slaves when I build them, because in 99% of cases a NIS slave only serves its own subnet.

View 1 Replies View Related

Server :: ProFTPD Master/Root User Can't Get Into All Folders

Mar 2, 2010

So, I wanted a master ftp user that could access all the folders for all the users. I did this by creating a second root user. I'm aware of all the security considerations, and if there's a better way to do this than creating a root user I'd really like to know it. That said, my issue is that my new root user is still unable in FTP to access folders owned by other users that aren't world readable. Note that this is ONLY when logging in via ftp. If I login through SSH I can access all folders without problem and without the need to sudo. So this is a true root user. Does anyone have an idea how I can fix the proftpd configuration to allow my root user access to ALL folders no matter the owner?

View 3 Replies View Related

Server :: New Zone Entry In Master Not Getting Updated At Slave

Feb 19, 2011

I have configured master and slave Bind servers. Everything works fine. But whenever I add a new zone entry at master server it is not getting updated at slave server in logs I see this error:
client 192.168.1.1#43428: view external: received notify for zone 'yourdomainname.com': not authoritative

At master server I do not see any error or warning message. This error clearly indicates that named.conf file does not have zone entry in it or domain name is wrong. While checking the named.conf file I see that the zone entry has not been updated at slave server. If I update it manually and reload named on slave then zone files (db files) are getting created without any issue and any modification at master server for the zone records are also getting updated. My concern is why zone record is not getting appended at slave server in named.conf file.

Is there anything I am missing in the configuration. I am pasting the steps which I have followed to configure my master and slave server:
Configure Bind as master and slave server
Install Bind on your server
yum install bind
OR
sudu apt-get install bind9
Generate RNDC Key using the command
rndc-confgen -a -k rndc-key
it will stored in /etc/rndc-key file
Master Server IP 192.168.0.1
Slave Server IP 192.168.1.1
Master Server Configuration
options .....

View 8 Replies View Related

Networking :: IPtables Rules For Master DNS Server To Allow Zone Transfer

Oct 24, 2010

I have set up a master DNS server at 192.168.50.9 and a slave DNS at 192.168.50.6. Both servers are BIND9.Machines are for testing/experimenting, hence the IP addresses. Initially, the zone transfer was blocked by the firewall on the master, as the slave uses randomly selected non-privileged ports for zone-transfer query. So, as far as I understand, there are two possible approaches:

1. Allow connections based on source, which should be
Code:
-A RH-Firewall-1-INPUT -p tcp -m state --state NEW,ESTABLISHED -s 192.168.50.6 --sport 1024:65535 --dport 53 -j ACCEPT
(and it works for me fine)

2. Allow ESTABLISHED and RELATED connections, which would be something like
Code:
-A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
which was my initial idea but didn't work, but has inspired me to dig deeper into firewall configuration topics :).

Question: Does zone change notification message count for opening a dialog, or notification from master and slave zone update request are two absolutely separate actions? If the latter is true, that, of course, explains why option #2 didn't work.

View 2 Replies View Related

Server :: TSIG - Hand Master Logs - Transferred Denied?

May 4, 2010

i've 2 namesevrers running bind 9 and i restricted the transfer between the master and salve through the TSIG, The transfer goes well with no problem for all zones but when i make dig axfr domain.tld @master i got transfer failed and on the other hand master logs said that transfered denied?

View 4 Replies View Related

Server :: Configure Master / Slave Dns Using SSL Authentication While Transferring The Zone Files

Jul 11, 2011

In our Server they configure Master / Slave Dns using SSL authentication while tranfering the zone files, i dont have much idea about ssl authentication for Dns, how it will works

View 3 Replies View Related

Networking :: Setup Multiple FTP Servers With Distinct Data Sets With 1 Master FTP Server?

Aug 27, 2009

Faced with disk-bound issues on a FTP server with high traffic. Would like to set up multiple FTP server nodes with dedicated storage for each node where all FTP access is managed by a master FTP server. So, a user would FTP to a single externally visible IP address for the master FTP server and then get routed to the appropriate FTP node. Are the mutiple FTP nodes required or is there a better way of doing this? Perhaps only one FTP server is required and then each node would serve as a separate file server

View 1 Replies View Related

Server :: Setup LAMP With MySQL Master/slave Replication And Apache Rsync?

Aug 12, 2010

I started over combining the first parts of this guide: [URL]..ubuntu8.04 (Only the first few parts in terms of configuration and naming). Then I used this guide: [URL]..Surprisingly enough all steps worked.

1. Now I need to set up LAMP servers with MySQL master/slave replication and Apache rsync.

2. Next i need to add BIND to both my Load Balancers with master/slave backup and replication...

Are there any guides to look at to follow on these? Can tou point me to the right direction for BIND with replication.

View 1 Replies View Related

Server :: Email Notification - Heartbeat To Send Email When The Slave Server Becomes The Master?

May 3, 2010

Have someone used Linux heartbeat to send email when the Slave server becomes the Master? I've read I can configure the MailTo under.

But I really don't know how to do it. I basically need my primary server to send an email when it becomes inactive and all the activities are manage by the secondary node.

View 7 Replies View Related

Server :: Get The Port Number Of The "ajp13" Service Running On Host Master?

Apr 1, 2011

how to get the port number of the "ajp13" service running on host master?

View 1 Replies View Related

Security :: Server "hardening" - Users Accidentally Locking Cluster Master Node?

Nov 17, 2010

I run a compute cluster with only a few users. Occasionally a user will accidently run a job on the master node that runs out RAM/swaps then hanges up for a while.In /etc/security/limits.conf I have set memlock to 7.5GB (master has 8GB RAM) and maybe that is what lets the machine come back rather than hanging completely? Is this the right setting to physocally limit a single user from asking for more RAM than the system has and bringing down the system? Should I set this to 2GB or so or is there something else I can do??

View 4 Replies View Related

Ubuntu :: How To 're-master' 10.04

Oct 7, 2010

I have one PC with Ubuntu 10.04 LTS installed, and so far I've configured it and installed it with so many packages and settings. Now, that I want to install the same Ubuntu version on my Notebook. The question is : Can I 're-master' my Ubuntu on my PC with all of the packages, settings and drivers installed? so I will have an ISO file complete with all of those packages and I just install it to my notebook without having to re-installing the packages?

View 9 Replies View Related

General :: Backing Up The Master Boot?

Mar 23, 2010

I want to back up the master boot on my hard drive, in case something screws it up. What software do you recommend for this?

My first idea is to boot from a Linux CD and dd the first 512 bytes of /dev/sda, and dd it back to recover. Will this solution work, and is it safe?

View 1 Replies View Related

Ubuntu Multimedia :: How To Control Master - PCM And LFE

Oct 18, 2010

Dell Inspiron 9400/E1705. In earlier versions of the sound settings in Ubuntu, I could press CTRL, then MASTER, PCM and LFE, and the volume buttons, whether on the front, using Fn + UP/DOWN or the slider in the systray would also lower or raise the volume of the subwoofer, because they would all be "bonded" together.

I have tried several things to make this work in later versions of Ubuntu, but nothing's worked. alsamixer won't allow it, sound settings are too simple, the ALSA-packages are so numerous it would take me months to check them all.

I know the solution is as simple as making the volume controls regulate all three, but I don't know how to do it anymore. And it's a real shame actually, because that's the only thing not working on this machine, and it was such an easy fix up until 9.10 (I think)

View 1 Replies View Related

Ubuntu :: Evolution Master Inbox?

Jun 7, 2011

How do I get to a "master" inbox in Evolution? One that shows all emails from all inboxes of all accounts I have integrated? There is one that looks like it should be the one (under a heading titled "On This Computer"), but it is not showing any emails.

View 2 Replies View Related

Fedora :: Ide Drives And USB Enclosures Set To Master

Feb 1, 2010

I have a Acomdata external hard drive enclosure with a PATA hard drive set to Master. I want to just be able to read and write to it as a storage drive, lsusb sees the enclosure Acomdata but not the drive, what do I have to do to read/write to the hard drive ??

tail -f /var/log/messages ;
localhost kernel: usb 2-3: new high speed USB device using ehci_hcd and address 6 localhost kernel: usb 2-3: New USB device found, idVendor=0c0b, idProduct=b157
localhost kernel: usb 2-3: New USB device strings: Mfr=10, Product=11, SerialNumber=3
localhost kernel: usb 2-3: Product: DMI USB2.0 Storage
localhost kernel: usb 2-3: Manufacturer: DMI
localhost kernel: usb 2-3: SerialNumber: 2009102609E0
[Code]......

View 2 Replies View Related

Hardware :: USB Wifi With Master Mode?

Jan 6, 2010

I'm looking for a USB wifi which supports master mode, 11n modulation, 5GHz band (with master and ad-hoc support for this band) and has detachable antenna connector.

View 1 Replies View Related

Networking :: Unable To Bind When NIS Master Down?

Mar 25, 2010

This morning, our NIS master server down (due to ram prob), and what happen is all the sun servers able to bind to NIS Slave, but not Linux servers.

Details:
sun_server[sab]% telnet linux01
Trying 10.x.x.x...
Connected to linux01.
Escape character is '^]'.

[Code]....

Where is the prob, in Sun or Linux? In Linux, how to make it able to failover to NIS slave?

View 2 Replies View Related

General :: Fast Way To Become Master In System?

Nov 5, 2010

I came across Linux in university syllabus and quite loved it.Hope I will get to learn here Linux. How to become master in Linux can some body suggest some fast ways to do the same?I want to learn Linux Very fast.

View 14 Replies View Related

Software :: Burn Bootable XP Master Cd?

Jul 20, 2010

I have a legit set of Microsoft XP master CDs and I want to burn a backup. I have been searching here and the wiki page. It looks like the dd command will do the job. I have 2 CD drives and one can burn also. Here is the command line (i think):

dd if=/dev/cd0 of=/dev/cd1

I am missing the option to make it bootable.

View 3 Replies View Related

Fedora Networking :: How To Set Ath9k In Master Mode In F11

Apr 9, 2010

Anybody have any idea that how to set the ath9k in master mode in fedora 11. I am unable to set the same.
I am using the D-Link DWA556 card using the kernel built in ath9k.Find below the output I got while setting up it in master mode sudo iwconfig wlan0 mode master.Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument.Does that mean that master mode is not supported?Also Want the information if there is any separate community or development group for ath9k development and download the source of same except linuxwireless.com.

View 1 Replies View Related

General :: 802.11n PCI/(USB Okay, Not Preferred) Card That Can Do AP/master Mode

May 19, 2011

I am looking for a 802.11n wireless card that Linux supports that can be dropped into AP/master mode.

I would prefer PCI, but USB would be tolerable, just not preferred.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved