Server :: Driver Support - QME2572 - Qlogic - Card Became Support By The Kernel

Jul 10, 2011

I'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.

View 3 Replies


OpenSUSE Hardware :: 3D Support With Radeon UMS Driver + Kernel 2.6.34rc5 + X Server 1.8?

Apr 26, 2010

This is just to report that I've got 3D support successfully enabled on my Mobility Radeon HD3200 chip with the open source driver on openSUSE 11.2. I did this to replace the proprietary fglrx driver that has already been installed for quite some time on my system.

Uninstalled fglrx, and here we go... Basically what I did was to get the latest X.Org server (1.8) and Mesa from Index of /repositories/X11:/XOrg/openSUSE_11.2 I changed all the corresponding system packages to the versions in that repository. I noticed that I cannot get any 3D support when pairing the last X server with the updated openSUSE 11.2 kernel ( With RadeonHD driver it gives me no acceleration at all (No DRI), perhaps it is still intentionally disabled to prevent lockups in r600 cards. With Radeon KDE wouldn't start.

So to get usable driver support I have to update the stock kernel to the one in Index of /repositories/Kernel:/HEAD/openSUSE_11.2 I installed the 2.6.34-rc5-22 kernel and reboot. Immediately I notice that KMS is working, but I could not get DRI to work, presumably caused by the drm being unable to locate two related firmware files (it is there in the kernel, just doesn't know why it is not being loaded). Other than that I do not know why I can't get any acceleration with KMS on. To workaround I passed the 'nomodeset' parameter to the kernel to run in UMS mode instead, and voila! with UMS 2D + 3D accelerations are working. I can enable kwin effects just fine.

Since this is a laptop I need suspend & resume and power management working. Good news is s2ram works perfectly with extra parameter. And all the new Radeon power management options: DynamicPM, ClockGating and ForceLowPowerMode can be enabled just fine! (For UMS you need to generate a xorg.conf and put those options in)Performance is good. So far it's faster than fglrx in some areas and slower in some other area. Now this is truly amazing!

View 9 Replies View Related

Server :: Qlogic Qla 1240 Scsi Card Driver Rhel 4 Or 5?

Jun 14, 2011

Does anyone have knowledge of where I can get drivers for above card?

View 1 Replies View Related

OpenSUSE Wireless :: Add Network Card Support To Kernel?

May 18, 2010

I'm using asus usb n-11 wireless adapter.Default kernel module drivers/staging/rt2870sta.ko hasn't id of my adapter. Please add this two strings to next kernel release

--- drivers/staging/rt2870/rt2870.h 2010-05-18 13:09:13.262882659 +0400
+++ drivers/staging/rt2870/rt2870.h 2010-05-18 12:10:20.000000000 +0400
@@ -85,6 +85,8 @@


View 2 Replies View Related

Hardware :: Doesn't Support The Video Card ATI Radeon HD4670 Driver

Jul 22, 2010

I'm a new Mandriva user,and have no clue about Linux system,but to be honest I don't want to use Windows product anymore. So I got the Mandriva 1 Spring Gnome,and installed it on my DELL Optiplex Desktop,works fine and very fast,therefore I decided to do the same with my Studio XPS 1640,but after I got a dark screen,so I used an external display(My TV) then realized that it doesn't support the video card on it ( ATI Radeon HD4670 ),and I don't know what to do.

View 1 Replies View Related

Debian Configuration :: Kernel Driver Support: Built-in Or Loadable?

Jun 26, 2010

Is there a way to programmatically determine whether a particular driver support is built-in rather than a loadable module? I'd be grateful if somebody would share how. I have written a shell script using the RTC (real time clock). I can check whether the rtc-cmos kernel module exists and load the module accordingly as needed, but I don't know how to determine when the driver is built-in. Of course, if the driver is built-in then the module does not exist.

I seem to recall there is a method to query the kernel config file (/proc/config.gz), through which I probably could grep for the CONFIG_RTC_DRV_CMOS parameter. I also can check whether /proc/driver/rtc exists. If that file exists then either the driver is built-in or the module was loaded.I realize the rtc-cmos driver is built-in with the standard Debian kernel build, but I still would like a way to query where the driver is supported.Is there a straightforward or direct method to query the kernel whether a particular driver is built-in?

View 3 Replies View Related

Server :: CentOS With MPEG-4 / H.264 Support And DVR Card

Feb 12, 2011

I have a dvr card that is a Softlogic 6x10 line of MPEG-4 codec card that uses mpeg 4. This is the driver that they recommend that I use but it is for ubuntu. Is there a Centos 5.5 equivalent? [URL]. This is the card: [URL].

This is what appears in lspci:
PHP Code:
03:06.0 Multimedia video controller: Unknown device 9413:6010

I found this on the net: [URL] and installed
PHP Code:

I get this error when I run a modprobe budget_av:
PHP Code:
modprobe budget_avWARNING: Error inserting videobuf_dma_sg
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting v4l1_compat (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/v4l1-compat.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting videodev (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/videodev.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting saa7146_vv (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/saa7146_vv.ko):
Unknown symbol in module, or unknown parameter (see dmesg)FATAL:
Error inserting budget_av (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/budget-av.ko):
Unknown symbol in module, or unknown parameter (see dmesg)

View 5 Replies View Related

CentOS 5 Server :: Updated Fresh 5.3 Xen Kernel And PAE Support Disappeared?

Aug 26, 2009

I have installed CentOS 5.3 with Xen on a PowerEdge 2650 machine with 6GB of RAM. As usual, PAE was already enabled so I did not have any problem with utilising all of the memory. However after upgrading to the latest release of the kernel (2.6.18-128.7.1.el5xen), memory available decreased to 4GBs. Then I switched back to the old kernel and 6GB was there. Then finally have switched back to the new kernel and 6GB is again there. So now PAE seems to be enabled but what concerns me is the inconsistent behaviour. (Also I am not sure the reason was the upgraded kernel.)

View 2 Replies View Related

General :: Ubuntu Can't Support A Higher Resolution That Laptop Can Support?

Apr 14, 2010

I have a HP laptop which can support 1600x900. But after I install ubuntu 9.10 on it, it can only support up to 1280x700. My laptop has a Nvidia graphics card. And i am using GNOME as my desktop environment.

View 1 Replies View Related

Hardware :: Card Reader/writer That Will Support Most Current Card Types?

Jan 20, 2010

Looking for a card reader/writer that will support most current card types. I am running Fedora 12 x86_64 on a home-grown desktop. Are there any gotchas, that I need to watch for?Also, Internal vs. external, any benefits of one over the other, or is it just personal preference?

View 5 Replies View Related

CentOS 5 :: Will 5.3 Support My X3100 Graphics Card And Bcm 4311 Wlan Card

Mar 30, 2009

very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?

View 5 Replies View Related

Debian :: EXFAT Support Vs NTFS Support ?

Aug 25, 2010

I'm looking to dual-boot Windows 7 and Debian 6 upon its release on my sister's laptop. I want to share a partition between the two of them so that /home points to this directory and the Windows equivalent also points to it (C:Users).

Anyway, I've heard good and bad things about the NTFSMount driver (I think it's NTFS-3G now) and the NTFSprogs project and so I am not so certain what I should believe. I do know that NTFS has relatively high overhead, though I do not recall the source of this assertion, so I am considering the use of EXFAT. An open source EXFAT project is hosted on Google Code at [url] and it utilizes the kernel module FUSE.

I'm quite certain that I've got everything covered on the Windows side -- that is, I know that both NTFS and EXFAT will be suitable filesystems for my required usage.

My issue is that I'm curious which will have superior performance and stability in Debian. I planned on building the package from source and mounting the device in my FSTAB but I have also found a PPA for Ubuntu on Launchpad at [url] that I could borrow the debian/rules from and make a .deb package from.

What do you guys think? Should I go at it with the EXFAT or NTFS partitioning? Is NTFS-3G actually fairly supported at this point? Or perhaps should I consider some alternate method?

I have also considered that the only files she will be sharing are those of music, videos, and pictures so it could be better to just link /home/xxxx/Pictures (Music and Videos, too) to the new partition instead of all of /home.

View 7 Replies View Related

Software :: Support For Wi-fi Midi Support In Linux?

May 11, 2011

I would like to know if it is possibile to have support for wi-fi midi support in linux.

View 1 Replies View Related

Red Hat :: Driver Support For Graphics Acceleration

Jan 4, 2011

I am using RHEL 6.0 OS runnig on an i5 core with H57 chipset. whether there is any support for GMA-HD in the builtin graphics drivers or do I need to add any extra driver for using GMA -HD?

View 1 Replies View Related

Fedora :: ATI Card And Compositing Support ?

Feb 23, 2010

Just got a VisionTek ATI Radeon HD2600Pro, which my Fedora 12 64-bit system seems to have no problem recognizing natively (though it is peculiar that it shows up in lspci as an a 'HD3600' instead of 2600), so things seemed fine ... til I tried to start X. To be thorough: I went from an nVidia Quadro NVS 285 in the system using drivers from rpmfusion, to this card in hopes of getting better graphics and compositing support. So I tried uninstalling the nVidia drivers and kmods, blacklisting radeon and radeonhd mods, installing the stock ATI driver straight from the ATI/AMD site (which included header compilation), and starting X ... no go. Then removed that, installed the OpenDrivers stuff ... still no good. Ended up removing all Xorg configuration (literally removing xorg.conf) and starting X with bare bones. And now X will indeed start up and go into my desktop environment (KDE), but as soon as I open more than a single application window, the system becomes virtually unusable, and compositing is completely out of the question.

Any advice for drivers/config/setup to get this working? Or do I need to go back to my crappy 128MB NVS card?

View 14 Replies View Related

CentOS 5 :: XFS Kernel Support In 5.4?

Oct 16, 2009

Does this mean kmod-xfs is no longer needed in centos 5.4 x64?

View 2 Replies View Related

Fedora :: F13 Driver Support For Geforce 5 - FX - Series

May 25, 2010

Will there be support for Geforce FX series graphics cards in F13 (kmod-nvidia-173xx)? Currently it's not available.

View 5 Replies View Related

Fedora :: Which Printer's Have The Best Driver Support On FC12

May 29, 2010

Which printer's have the best driver support on FC12

View 7 Replies View Related

OpenSUSE Hardware :: Q45 Graphic Driver Support To 10.2

Apr 1, 2010

The platform I used is Intel Q45 chipset. But my customer insist on openSUSE version 10.2. The problem I met is that I cannot get any graphic driver for Q45 chipset upon openSUSE 10.2 developing.

View 4 Replies View Related

OpenSUSE Hardware :: Driver Support For ATI HD 6850 ?

Feb 9, 2011

The AMD tool ATI Catalyst does not provide Linux support for the ATI HD 6850. Running the tool allows the monitor to display in 1080P. However, it results in a watermark stating the hardware isn't supported.

Is there an open source driver that will support this card?

Can the Windows driver be co-opted for Linux?

When will there be an open source driver to support video cards?

View 7 Replies View Related

OpenSUSE Wireless :: Support The Driver Of Ar9271?

Mar 18, 2010

when will support the driver of ar9271 for linux?

View 2 Replies View Related

Ubuntu :: Way To Increase Resolution Until Driver Support Comes?

Jan 9, 2011

I have an AMD Radeon HD 6950 and I know that no driver will be released for a while that works (current one causes xorg to crash and creates a reboot loop). Until then I have a 1920x1080 monitor running at 1280x1024 bc there are no higher settings.Is there any way to increase the resolution until the driver support comes? I tried a method involving xandr but that didnt work.

View 5 Replies View Related

General :: Nvidia To Drop Support For The 'nv' Driver?

Mar 27, 2010

It would appear Nvidia are to drop support for the 'nv' driver,recommending using the Vesa driver instead until you install their proprietary driver.Read the article here:

View 14 Replies View Related

General :: AOC Monitor Driver / Input Not Support

Mar 13, 2011

Running Ubuntu Lucid Lynx here. Got a LCD AOC monitor. Model e943Fws. Starts OK until logging screen. As soon as i try to log into my account a "input not support" floats around the screen. Are there drivers i should install? Anybody knows this LED monitor..?

View 5 Replies View Related

General :: Driver Support For HP Pavilion Dm1-2020eo?

Sep 21, 2010

First of all, I have not tried to install anything yet, just doing some research. I recently bought a HP notebook with the intention of installing Linux (I was thinking Ubuntu?) on it, and in my ignorance I assumed that driver support for Linux wouldn't be a problem. Alas, I have some difficulties finding out how to proceed with the installation.

The laptop I bought is a HP Pavilion dm1-2020eo, however it seems it is a region specific model, as I couldn't find it on HP's UK/US sites. Here is a link to the Norwegian description; I am sure you can figure out what the specifications are (don't know if they are relevant at all, though, heh).I couldn't find the model in this list, Windows drivers can be found here. I realise this whole post is a mess, however I hope someone is able point me in the right direction. (On a side note, does anyone know a good guide for building a boot disc/USB stick so I can customize the distro with drivers, partition tools etc?)

View 6 Replies View Related

General :: HDMI Support In Driver Code?

Nov 10, 2010

I want to know whether by default Linux supports HDMI? If yes, where can I find HDMI support in Linux driver code?

View 2 Replies View Related

General :: I2C Driver Support For Intel QM57?

Nov 3, 2010

Does Linux I2C driver support Intel QM57 chipset?

View 2 Replies View Related

Software :: Driver Support For ATI - NVIDIA On A Laptop

Dec 14, 2010

I am looking at purchasing a laptop (HP EliteBook Mobile Workstation), but I am not sure whether to buy one with ATI or NVIDIA graphics. My only real concern for graphics is driver support. Which has better support?

BTW, I dont know if this is important, but I will be installing Fedora linux. 12 or higher.

View 6 Replies View Related

Fedora :: Default 32 Bit Kernel Support More Than 4GB?

Feb 18, 2010

I just want to know what is the default Fedora 32 bit kernel - does it support more than 4G memory. I would like to save myself from compiling custom kernel and all following fiddling (nvidia drivers, virtualisation software etc) and 64bit OS is not for me - too many apps that I need are missing, of poor quality or need more manual intervention. Actually if bigmem / whatever it is called is configured in the default kernel, this may be the reason to switch. I intend to use 4 to 8 GB memory and it's a desktop, so server builds (like Ubuntu) are not for my taste.

View 2 Replies View Related

General :: Re-compile The Kernel To Get UDF Support?

Aug 31, 2010

A while back I compiled a custom kernel, 2.6.35. I forgot to add UDF support when configuring and compiling. Will I need to re-compile the kernel to get UDF support or is there some other way I can add it?

View 6 Replies View Related

Copyrights 2005-15, All rights reserved