Server :: Cannot Access Web From Server Console

Apr 21, 2010

I'm trying to set up an intercepting proxy and web filter (squid+dansguardian is the plan), using firehol for firewall configuration, on Ubuntu Karmic.The client computers access the web through the proxy with no issue. But the server console cannot, though it can ping and DNS lookup.

View 2 Replies


Server :: Ubuntu 9.04 Server - Console Font Too Big And Starts Off Screen

Jan 4, 2010

The title pretty much says it all. Once I get past GRUB, the font becomes HUGE and starts off screen. It appears to be center zoomed because I cannot see the login prompt nor anything I type. It's not really an emergency, I installed OpenSSH during the OS installation and can just turn it on and log in over SSH or start up Webmin. It just bugs me that I cannot figure this out.

There is no graphical environment installed, so it's not a video card issue. I tried adding vga=ask as a kernel flag and then tried several options, but to no avail.

View 1 Replies View Related

General :: Access Remote Mysql Server Through Socks Proxy Server?

Aug 25, 2010

Scenario:A - Local Unix machineB - socks proxy server port 1080C - remote mysql server port 3306I want to connect to the remote mysql server(C) from local unix machine(A) using sock proxy(B).

View 1 Replies View Related

General :: Setup Remote Access Server On Red Hat Enterprise Server Release 5.1?

Aug 30, 2009

how i have a machine installed Red Hat Enterprise Linux Server release 5.1 with 2 modem (usb & com port) still i want to configure RAS server so some pple able to connect my server and send me some files.

View 4 Replies View Related

Server :: In Apache Server, Change Log File Location And Log Format For Access Log Fil?

Aug 19, 2009

I installed Apache server with Debian 5.0.2 Lenny. I am trying to write a script which would analysis web log files. I found the log files on /var/log/apache2. There is an access log file, `access.log`. My question is what configuration file determines the location and the name of the access log file. How can I change them? I used CustomLog in /etc/apache2/apache2.conf like below.LogFormat ": %h %l %u %t "%r" %>s %b" common
CustomLog /home/test/my_log_file common Apache2 generated /home/test/my_log_file. But no logs were written in the file even after I run `/etc/init.d/apache2 restart`. Ichanged the log file location. It still didn't work. However, Apache2 still wrote logs in the file `/var/log/apache2/access.log`

View 1 Replies View Related

Server :: Access From A Browser To The Squirrelmail Configtest Page In Server?

May 10, 2010

I was trying to have access from a browser to the squirrelmail configtest page in my server, making some changes, I accidentaly remove the directory webmail. After I replace it with a backup apache2 can not start. This is what I have. Syntax error on line 281 of /etc/apache2/apache2.conf: Syntax error on line 1 of [URL].. closed. But I am sure there is a ?> at the end of this file.Base on what I read on [URL]...-with-the-tag/ I test without the ?> also, but I got the same error.

View 2 Replies View Related

Server :: Access Ubuntu File Server If It's Connected To A Router?

Feb 13, 2011

I want to access files on my ubuntu server wireless. Is there a way I can do that? I'm sorry if this is a stupid question, but I'm kind of new at this whole server thing.

View 5 Replies View Related

CentOS 5 Server :: MySQL Server Setup For Remote Access

May 4, 2009

I have just installed CentOS 5. I have set mysql database to access from remote machines. But now the problem is it is not connecting from the local machine now.

View 5 Replies View Related

Server :: Using CentOs On A Remote Server But Can't Access PhpmyAdmin

Oct 25, 2010

Im using CentOs on a remote server. I've recently installed phpmyadmin but cant access from [URL] I checked the files and found only 3 folders in /var/lib/phpmyadmin -config / save / upload - all of them empty. Whenever I try intstall phpmyadmin again it just says its already installed and up to day.

View 2 Replies View Related

Server :: Config Web Server To Be Access By Other Machines With Browser?

Jul 19, 2010

I installed a server called Oracle VM Manager, which is actually a web based application to manage Oracle VM server.After successfully installed everything, it suppose to be access by browser using But strange thing is, I can see web pages from the server itself with but any other machines to access it with hostname or ip address all failed.

View 2 Replies View Related

Server :: Server With NFS Configured Would Be Able To Access Files By MAC Clients?

Dec 29, 2010

if I use Linux File server with NFS Configured, Can MAC clients (workstations) access the files on Linux server over the LAN network

View 7 Replies View Related

Server :: NFSv4 And Kerberos - Access Denied By Server

Mar 28, 2011

I am attempting to Kerborize an NFS server on a RHEL6 machine, but I cannot get it quite right. The error message I receive when executing the following command (as myself, not as root) is:


I have a keytab generated from the KDC for both NFS server and NFS client (both RHEL6 hosts) placed in /etc, and I have configured PAM/Kerberos so I can login via SSH and see I have a valid ticket with klist.

I can login to both NFS server and NFS client via SSH and get a ticket, but I don't know where the problematic NFS permissions reside.

The /etc/exports file on the NFS server looks like:


I have disabled IP Tables on both client and server, and hosts.allow and hosts.deny are not blocking traffic at the moment. On the NFS server.

Here is the output of rpcinfo:

On the NFS client, here is the output of that same command:

View 1 Replies View Related

Server :: Only Allow User Access Web-server On Working Hours?

Aug 3, 2010

I only allow my users to access my web-server (apache) on working hours (mon to fri and 08:00 to 17:00).. how to configure my Apache?

View 2 Replies View Related

Server :: OpenVPN Access Server Error: 501 Not Implemented

Apr 12, 2011

We're setting up an OpenVPN access server, a quite straight-forward and very customizable system. Only we have a problem, I guess caused by Apache, when we try to reach the client web server via a custom port (see screenshot in attachement) we get the following error: Code: 501 Not Implemented. The requested method is not implemented by this server. Although we have added on the cisco router a port forwarding for port number 9943. It is working when we access the website : port with the local IP address [URL]...

View 2 Replies View Related

Server :: User Access To Directory On Server (SUSE 9.1)

Apr 19, 2011

I am new to Linux and need to add user access to a particular directory on a Linux server (SUSE 9.1).I am able to access the directory via telnet however I do not know the commands to add the user. userBFA needs readwrite access to the SMF directory. Please let me know if any additional information is needed.

View 5 Replies View Related

CentOS 5 Server :: Ftp Server With Folder Access Restrictions

Dec 10, 2010

'm a bit familiar with Centos as I have set up few website on this environment but I have never actually installed, and especially, configure ftp server. Now I need to do this. Simply I need to be able to create an access account for a user and then restrict access to only one folder within the website (idea is to allow this user to upload images via ftp). I did google for ftp servers and read about vsftpd but I couldn't find any tutorial on how exactly make it work with folders and specific users.

View 3 Replies View Related

CentOS 5 Server :: Cannot Access Web Server From Outside Server

Apr 1, 2010

I know am going to sound silly but got to ask the following.I have been using Ubuntu for several years successfully & want to switch my five servers to Centos 5.4.I have installed a working version but I seemed to be missing something & cannot find anything on the net.

Background -
a) Running Vmware 2.0
b) installed Centos 5.4 on a virtual server with 1024 meg memory and 40Gig oh HD
c) I can use printer on nework
d) I see folders on network
e) I can ping other devices/websites from Centos server and I can ping Centos server from other devices, share folders, etc
d) Installed Webmin successfully, I think.
e) I have several domain names registered and 5 static public IP addresses

Issue -
a) I cannot access web server from outside the server, in other words, much like in Ubuntu after all configuration has been done, I can go to any computer on network and type in and I'll return a test page that says IT WORKS!. is this done differently in Centos.
B) when I tried https: to access webmin, again I get time out error.

Questions -
a) are there any settings am missing? obviously!
b) am I missing software? I hear you can install a Cpanel type software.
c) Is there a guide that can walk me through process to setup host names, domain name, IP addresses, etc
d) If you can give me steps to follow I can have something to do some research.

View 1 Replies View Related

Server :: VPS Ip's - Connect To Console By Ssh ?

Jan 7, 2010

I have a website on a shared hosting and the domain name of this website is hosted by the shared hosting company too. This domain name has :

- One ip address and two name servers
- and

Both name servers pointing to different ip addresses. Now I have a VPS server running on Debian 5. The new hosting gave me two ip's for this VPS.

Now I want the domain name to point to the VPS, I asked both hosting providers for the VPS and the shared hosting which host the domain name, the shared hosting tell me that it is very easy what you want to do and possible, you have just to point the domain name to the new ip of the VPS and all is fine, the seem thing confirm the VPS provider too.

Now as I have two ip's I am confusing, first :

- Which ip should I indicate when setting the domain name to point to ? because VPS has two.

- Once I point the domain name to the new ip, is there a further configuration to take on setting on the VPS ? for example should I indicate the name servers and on the VPS or it is not necessary ? the hosting tell me that the problem is solved once I point the domain name to the VPS ip.

- To connect to console by ssh, I am free to choose one of the two ip's of the VPS or there is just one which work for console ?

View 2 Replies View Related

Server :: Access Website Via External Server

Mar 29, 2011

suppose i have a website named now i want to access this website using proxy server(squid,or etc...) under my personal server named, means that

View 1 Replies View Related

Server :: Configure Apche Server To Access From Outside?

Mar 2, 2010

I have configred apache webserver. But i do not know that how to configure it to access from outside (From internet using https). Could anyone guide me step by step?

View 1 Replies View Related

Server :: Local Dns Server With No Internet Access

Oct 1, 2009

In my computer networking class I have the option of doing a project where I set up a dns server for our classroom network. The problem is that this network is totally separate from the school network and we aren't allowed to connect it to the internet. I want all the machines to ping each other by name instead of ip using dns instead of host files on all 20 computers. I read on a site somewhere that you cannot do this because the dns queries will always go to the root servers. Is this correct? Is there some way I can do this using dns? The machine in question is using Ubuntu 9.04.

View 1 Replies View Related

CentOS 5 Server :: Setup FTP Access To Server?

Aug 20, 2009

i try slicehost out with CentOS5, What is the right direction to setup FTP access to my server?

View 1 Replies View Related

Ubuntu / Apple :: Mac G5 No Console On 10.04 Server

May 5, 2010

I really don't know what to make of this. I have just installed Lucid Server onto my first generation Mac G5 (1.6 uni). The install went fine & the system rebooted...

The first problem:

Fatal errors encountered installing thermal control. All the windfarm modules failed, but judging by the fact the mac doesn't sound like a jet engine, thermal control /is/ working.

The second problem:

After this, it brings up the splash screen & then the console goes dead. No keyboard, no display, no nothing; it looks like the system has hung. But... SSH is working. The system is up and as responsive as it should be!

I've tried adding video=ofonly to yaboot.conf and zapping the pram, but it made no change.

View 6 Replies View Related

Server :: No Input On Serial Console?

Oct 7, 2010

I've got a home server running ubuntu 10.0.4. It have no monitor or keyboard. So I want to access it from a serial console. (I use SSH currently but if something goes wrong, I need to be able to do something... so serial console seems a fine thing). OK, so on the server, I tell grub to output everything on ttyS0 and opened a getty on ttyS0. On the client side (Laptop running Ubuntu 10.0.4 with pl2303 USB to Serial adapter) I use Minicom.

Home server restart:I see grub menu, linux kernel messages, login prompt. But, I can't do anything:In grub or at the login prompt, no key press is recognized by the server.I've got write permission to /dev/ttyUSB0. I tried a different getty (mgetty)with no success.I stopped the getty on ttyS0 on the server. And run minicom.

From the server's minicom, if I type something, it appear on the client screen. From the client's minicom, if I type something, some garbage appear on the server screen :(One of this things for each char typed). If I short-circuit pin 2 and 3 of the client serial port, it echoed what I type. The two serial ports are connected with a nullmodem cable. (seems to be a full handshaking cable). Of course, same serial port config for both minicom, grub and getty. Hope I'm understandable enough. (English not my primary language). Can somebody help me make this *$*#! serial console working right ? I'm on it for 10 hours now with no success...

Edit : I nearly forgot to tell you I had to update the standard ubuntu kernel to 2.6.34-020634rc1-generic because there was a bug in the pl2303 driver in the stock kernel (2.6.32-25-generic) which prevented me from doing anything (even receiving).

View 8 Replies View Related

Fedora :: How To Prevent GDM To Start X Server On Console

Feb 15, 2011

I have a headless server, and I want to prevent GDM 2.30 from starting the graphical login on the console screen. As I use XDMCP, I still need GDM running on the server... With previous versions of GDM, I was doing that through gdmsetup, which ended with these lines in /etc/custom.conf :



but it seems that it's not working anymore with 2.30...

View 5 Replies View Related

General :: Troubleshooting - Cannot Login To Server Via SSH/Console

Apr 5, 2011

I got two computers with the exact same symptoms today: Both seem to be alive. They answer pings and they host virtual machines which are working. However, I cannot login via SSH. I get

$ ssh -v obelix
OpenSSH_5.3p1 Debian-3ubuntu6, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /home/mike/.ssh/config
debug1: Applying options for obelix


On the console I can switch the ttys and enter my login credentials. After that I see the GNU/Debian Linux welcome message an no prompt. The system seems to hang. I'm able to switch the tty again and login with the same result. (I tried that three times now and I start running out of ttys.) A search on the Internet suggested some ressoucre shortage. How could I release some resoucres than? How could I further investigate the situation before just trying a hard power off?

View 1 Replies View Related

Server :: Redirecting Output Of 'sendmail -bv' To Console?

May 3, 2011

When I run 'sendmail -bv', it sends the mail delivery status report as a mail to the root. Is there a way I can redirect this to the console instead of sending as a mail. requirement is to programatically find the mail host of the recipient for which I thought of using this 'sendmail -bv' command. Is there any other better way to find mail host of the recipient

View 12 Replies View Related

Server :: Adding New VM - Failing Console Connection

Jun 21, 2010

I have a KVM server and am trying to add a new VM. The problem is I am unable to connect to the consle to finish the installation. I have put the details of the steps I took and my ssh config file for clarity. It seems I have a problem with a vnc 'security type'.

ssh config
Port 2200
Protocol 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
UsePrivilegeSeparation yes .....

$ virt-manager -c qemu+ssh://root@phoenix:2200/system
[Prompt for password and connects OK]

KVM Server
# virt-install --connect qemu:///system -n web -r 1024 --vcpus=1 -f /dev/vms/web_os -s 5 -c ~ecosta/debian-504-amd64-netinst.iso --vnc --noautoconsole --os-type linux --os-variant debianLenny --accelerate --network network:default --hvm
Starting install...
Creating domain... 0 B 00:00
Domain installation still in progress. You can reconnect to the console to complete the installation process.

I can see the new VM but when I chose to open the console, the password is asked again and again without a successful connection to the console. The following is what I found in the log.
virt-manager log: .....

I then tried to make an ssh tunnel and use vncviewer to connect:

$ ssh -p 2200 root@phoenix -N -T -L 5902:localhost:5902

$ vncviewer localhost:2
Connected to RFB server, using protocol version 3.8
Server did not offer supported security type

$ ssvncviewer localhost:2
Proto: RFB 003.008
Connected to RFB server, using protocol version 3.8
Server did not offer supported security type:
sectype[0] 19
Security-Type: 0 (rfbSecTypeInvalid) Latency: 12.40 ms
ShmCleanup called
VNC Viewer exiting.

View 2 Replies View Related

CentOS 5 Server :: Serial Console Does Not Work?

Apr 16, 2009

I configured the serial consol on centos5 as follows

# dmesg |grep tty
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS0,9600n8
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A[code]......

But I could not consol Centos server from my labtop (win xp) Is there missing or wrong configurations ?

View 3 Replies View Related

Ubuntu Installation :: No Login Console After Upgrade Server From 9.10>10.04>10.10>11.04?

Jul 13, 2011

I just did "do-release-upgrade" from ubuntu 9.10 > 10.04 > 10.10 > 11.04 which successful but after a restart, no login console just a blinking underscore. However I still able to login to server using ssh. During the boot I saw this failure "Starting system V runlevel compatibility [fail]".

View 4 Replies View Related

Copyrights 2005-15, All rights reserved