I've setup a samba server on a centos 5 machine and am trying to connect to it via a windows 7. The problem I'm encountering is that the only share I am able to connect to is the tmp share. It doesn't matter if it is a protected share or not, I always get a "network path could not be found error" when trying to open the share from windows.
Fairly new Linux user, running Fedora 12, attempting to set up a simple Samba share to share files with a Windows box. I've gotten to the point where I can connect from the Windows box, and see a home directory and the directory I'm trying to share. The home directory is accessible and works as expected, but when I try to access the other directory I get "The network path could not be found."
if i try to connect to my samba server ( share ) from my windows xp ( or vista, i've tried both ) it says, that the network share cannot be found. i've installed all necessary rpms on my fedora 10, necessary for running a samba server:
When I try to connect to the share from my XP machine, I get a "network path cannot be found" error message.
Below is the entry in /var/log/samba/samba.log
[2008/11/19 11:57:51, 0] smbd/service.c:make_connection_snum(1003) '/server2/test' does not exist or permission denied when connecting to [server2] Error was Permission denied
Here is my smb.conf file:
[global] # Server name server string = Intranet Server (Primary)
# These are the default password settings. ; encrypt passwords = yes ; smb passwd file = /etc/samba/smbpasswd
# Define NT domain/workgroup name. workgroup = intranet
# Security mode. (See SAMBA documentation for details.) ; security = user
# Restrict conections to specific IP addresses. hosts allow = all
# The %m variable sets a separate log file for each # connecting machine. # log file = /var/log/samba-log.%m # Keep it basic - one file! log file = /var/log/samba/samba.log
# The number of minutes inactivity before a connection is # disconnected. (This disconnection should be transparent to most # clients, which an have auto-reconnect feature. Removing inactive # connections is to preserve the server's resources.) deadtime = 10
# These socket options are suggested in the default smb.conf file. # Who am I to disagree? socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Define both Ethernet interfaces. (Otherwise, I suspect only one # will be configured??) interfaces = eth0 eth1 username map = /etc/samba/smbusers ; guest ok = no ; guest account = nobody
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
I just installed UNE v10.10 on a new netbook and I guess I've become too spoiled using the Desktop's PLACES->Connect to Server because I can't find where this is in UNE. I'd also like to "bookmark" it so I can single click to connect to "crunch20/netshare2" (I have added ip for crunch20 in /etc/hosts).
I am running Jaunty 9.0.4. I used system-config-samba (gui) to configure Samba. I put myself as a user and tried to map the drive from my local PC. I am unable to map the drive. On windows, I try to connect using a different user and when I select finish, it prompts me again and adds my workgroup before my user name.
I have an Ubuntu server that's part of a Windows domain and requires Kerberos authentication when connecting to its Samba shares.I have an Ubuntu desktop machine that is capable of obtaining Kerberos tickets via kinit and can successfully connect to the Samba share on my Ubuntu server using Kerberos authentication via smbclient.
We have Ubuntu Server for samba share. We have windows xp clients working perfectly as client station.However, we are facing problem in connecting ubuntu client. Can anyone guide me, how to connect ubuntu client to samba share. (Not as root user)
Yesterday I reinstalled my ubuntu 11.04 and now I cant get samba to work. I allso installed Firestarter to get internet connection to my media center pc. In firestarter I have unchecked in the "advanced options" "block broadcast from external network".In my media center pc when I go network connection and view workgroup computer, I cant see my computer at all. If I try to ping my computer then everything is ok.
I am setting up samba on my CentOS server for the first time. I am using webmin to configure samba. Here is the smb.conf
[global] netbios name = KISKA cups options = raw load printers = yes server string =
I can see the domain name "KISKA" in the "network" tab of windows explorer, however when I click on it I get this error: Windows cannot access \KISKA check the spelling of the name. otherwise there might be a problem with your network. Under the details of this error I get this: "The network path was not found" Also I have stopped iptables so it cant be firewalled
I'm running 10.10 on a pretty fresh install with a brand new system I built especially for Ubuntu.For some reason, I'm beginning to have trouble with accessing my Samba shares from this computer. I have a Windows Home Server also running on my network and I have to be able to access the files on it.At first Nautilus showed "SERVER" in the folder tree when I clicked on "Network" and everything was working great. A couple of days ago my WHS "SERVER" suddenly no longer showed up in Nautilus and I had to mount the WHS server manually (via "Connect to Server...").
Now, today, even that doesn't work. When I try to mount manually I get the error "Failed to Retrieve Share List from Server". I can now no longer access the WHS from Ubuntu at all.Why has my ability to access the Samba shares on my WHS deteriorated over time to the point where I can't access them at all?? Any ideas?I have other systems on this network (Mac and Windows) and none of the others have any problems at all with the WHS. Re-booting WHS and router has no effect. I've changed nothing in my set-up. Is this update related?
I have a samba share setup as the following. When I browse to it from PC's added to my AD domain, they connect instantly. When i browse to it from a laptop that's not part of the domain, i get prompted for login credentials. what credentials should I be putting in? I can't seem to figure it out. or is it because i have the workgroup set to what my AD domain name is, and the laptops aren't part of that domain.
path = /data/photos browseable = yes force user = pictures force group = picturesgroup
I just recently constructed a computer to create a nice Fedora Linux server to replace a Mac Mini server that I have been using for a few years. I'm attempting to create a Samba share for my machines, a Windoze 7 machine as well as a couple MacOS 10.6 machines. I've set up Samba, started the service, allowed Samba in the firewall, and used system-config-samba to set up a share with a user. I created a User called "space", and a share /media/peliculas/Movies (a mounted hard drive). When I type in \IP_ADDRESS in the address bar in windows 7, I get the option to log in. I log in correctly and I see two directories "space" and "Movies." Unfortunately when I click on one of them I get the following error message:
Windows cannot access \IP_ADDRESSMovies Check the spelling of the name. Otherwize, there might be a problem with your network. To try and identify and resolve network problems, click Diagnose. I also get something similar when I attempt to connect with my mac machine. Using "Connect to Server" I type in: smb:\IP_ADDRESS, and login, I have the option to mount "Movies" or "space." If I select any of these, I get the following error message: There was an error connecting to the server "IP_ADDRESS." Check the server name or IP addres, and then try again. If you are unable to resolve the problem contact your system administrator.
Also, if I type 'smbclient -U space -L IP_ADDRESS' I can see the "Movies" in the "Sharename." At this point I'm not sure what else to do, and have been trying to figure this out for the last few days (losing sleep due to being baffled). The only thing that I can think of is that I have something wrong with the smb.conf file. Here is what it currently displays:
workgroup = WORKGROUP server string = Samba Server Version %v log file = /var/log/samba/log.%m max log size = 50
One last thing, when I check the log files, there are error messages that state: smbd/service.c:1009(make_connection_snum) '/home/space' does not exist or permission denied when connecting to [peliculas] Error was Permission denied --Windoze 7 and MacOS 10.6 log files
I'm running Lucid and and trying to get Samba set up to allow sharing files on my network. My problem is that my Windows laptop (Win7) can't see the Linux PC when I click on Network. It only shows my own laptop and my roommate's Vista laptop. However, if I manually connect to the computer (\serenity) it works just fine.
Right now I'm simply using the smb.conf that comes with the package and adding my share info.
When trying to connect to a Samba share, it requires to send the servernetbiosname. Let me try to describe it.At my university anyone has a personal web directory, which is hosted at another university. It's on a SuSE server, shared via Samba. There are several universities on this server, using the same Samba with different NetBIOS names.There is an open Cisco WiFi, anyone can connect. But to use it, you have to use VPN (Anyconnect for example or in my case the module Ubuntu provides).Now my problem is, I can't easily connect to any share on the server (tried several shares from several machine to be sure it's not just me). After trying several variants on bash, I finally figured out, that I have to supply the servernetbiosname to get it to work.Not working:
I have a networked raid drive. Thecus 2100. Its running linux, and includes samba sharing. On that I have a folder shared. I can connect to and read and write from nautilus. No problems. However, I can't use other apps through that method. Its not really "mounting" that drive in the sense you'd normally think of (afaik).
If I try to mount the folder, no matter how I have tried so far (-t cifs, smbmount, etc), I can navigate the folders, but if I try to read any file I get a permission error. Looking at the permissions with 'ls -l', everything looks OK. The weird thing is, I can write a file, then read that file back as long as its the same session.
Just now I tried 'smbclient' with no special arguments. Just the server and path url. It asked for my password. Once I was in, I had no trouble getting files. I had a thread about this a while back and there were several links and all sorts of command line options to try, which I did, with no different outcome. I think its got to be something much simpler and more obvious. smbclient and nautilus seem to have no trouble. Anybody know what they're doing differently?
I have a LAN of about 70 computers that I would like to share media files between. I have gotten to the point with Samba that I can view the files without a username/password from client PC's. I would like to make all the folders read only except for one which will be writable for everyone. The thing that I am having a hard time with is allowing a couple of administrators (on Windows 7 machines) read/write access for all files/folders. I am completely new to Ubuntu and Samba so please make explanations thorough. Here is /etc/samba/smb.conf file:
I have a Samba Share which is mounted on various linux systems throughout the network. Whenever any of my user access those files using vim, Gedit it works fine and get perfect permissions to read/write those files. but whenever they try to open with any php IDE (quanta plus, geany, eclipse-pdt) they get error while saving those files. I dont think it is a permission or samba issue because we are able to edit/save those files using normal editors..
This is my first post. I am not all that new to Linux. I have done lots of reading on the OS but always felt a little timid when it came to trying out stuff.Here is my problem I have a stand alone samba server I am trying to setup to share all my digital photos and other doc. I can see the share from other machines. On the windows machines you can see the users home directory and the share itself in an folder icon. Whenever I try to access the share it asks for a passwd. I enter the passwd and the share folder is visible when I click on the folder I get and error message.
using OEL 5.4, which uses Gnome 2.16 interface I can see my share from Windows, but whatever I do, I get messages that my share is not accessible. The whole user thing is quite complex, dont understand what user I should use on Windows, what password, what user should have what rights on linux.
I'll post smb.conf tomorrow ... The problem is that Windows lacks any decent error message, stating what kind of error message. Is there no Samba client for Windows?
I want to share a same directory so that it can be accessed by both Linux clients & windows clients. how can i do this? i want to share that directory with both NFS & samba services. Is it possible to do this?
I am using Cen OS 5. I have configured Samba server on it. I create a accounts suppose tom and 2nd is jarry in my samba server and map it in my windows xp computer as P drive (Private Drive) where the users can access their home directories. When tom tom enter into own account he can access his own home folder and same position with jarry. I want to create a common share drive using samba where all samba users can keep their data with their respective folders normally s drive i.e share drive. They can create file and folders and even all users can access the files of each others. Like tom can access jarry files and jarry can access tom files or folders to share their office work with each others.I want to know is it possible in samba to create a common share drive where all users share their files each others.
"My network" is behind a firewall inside a larger windows network with AD. My network has a Debian Server with samba 3.2 running. There are 50 users on my server. Users has accounts on the win-server, but is only using this to read mail. How do I mount a windows share on my Debian server in a way that all my users can read and write there?
I have set up a computer to use as a file server using Samba. I attached a 1TB hard disk to it and had the system to mount it automatically. I have 4 user accounts which will be able to access this network share. An administrator account is called "server". I'll call them user1, user2 user4. This is the folder structure:
+-/mnt/FILES +-BACKUP backup files (accessible only to "server" user) +-MUSIC music1.mp3 (read only files for all users) music2.mp3
I don't know which groups I should create. I'm having a hard time setting file/folder permissions. And I wanted to know how to set Samba so that it won't ask for a password when accessing public/group files, but asks for it when accessing private user files.
I have Samba installed at home. It is sharing some folders through the network..
The problem is that I can access and map those shares with Windows machines... But if I try clicking on the linux server name in the folder tree in order to expand it and show every share available I get an error message saying that the server is unavailable and gives me this: "The procedure number is out of range".
I know the server is available as I can ping it and open the shares (if I type the full address). Is there anything to do with IPC$ share?
I have created a samba share and mounted the share with /etc/fstab on another machine. This share is supposed to be a fully public share i.e. i have different share where different permissions are set but on this particular share i intend to have full read write and execute rights to all the users on my mounting machine.
The problem is that I get only owner and group rights for write on directories that i create due to which all my users can create files in my mount directory but when they create a folder they cannot create any file inside that folder.
I have recently installed Fedora F11 with a Samba server. The smb.conf seems fine but I cannot see any of the files in the share from a Windows machine. I am probably missing something unbelievably simple but driving me nuts!
I can see the machine and share from windows
When logged in as the user fred I can see all the files in Linux - most are owed by fred.
smbuser: Code: # x_name = SMB_name1 SMB_name2 ... root = administrator admin nobody = guest pcguest smbguest fred = fred smb.conf: Code: [global] workgroup = Workgroup server string = Samba Server Version %v
netbios name = MachineName
hosts allow = 127. 192.168.0. ......... [Docs] comment = Main Documents path = /mnt/documents read only = no browseable = yes valid users = fred ......... The other thing I find a bit odd is that Code: service smb restart does not effect the way that the windows machine sees Samba. It appears that you need a full restart to get the changes to show properly.
I've began to work on getting my access control, set up properly on my server, and want to create a "my documents" folder for each user I add. I do not want it being part of the home directory and have read everything and still can't seem to get it to work. I've got a second drive that is mounted at /private on my server, with a folder that is underlying on it call users and groups. Then from there is has the exact unix username that I set up in Users and Groups. Ex. /private/user/gary . With Samba, I added the following code:
[My Documents] guest ok = no comment = %u's Documents
I've tried using %u,%U,%S, and the normal username and of all of them, it will only work with the username. I've even used force user. added root to the valid users list and it still gives me access denied or the multiple connections to a single share with multiple user names prohibited but nothing is mounted on this share. On Webmin, it doesn't show any connections to the share. I'm rather at a stumped state in which is frustrating me, because I want to have this so when I go from my desktop to my laptop I have "My Documents" On either unit. Security on the server is set to User because I've searched to see if I can't find a way to make shares visible by a guest but read only to them and when I access them from my log in to make it read write using the "Share" option.
I'm trying to set up a test system for Windows 7. I've been having trouble getting it to map drives on the domain where I work, so I wanted to set up a test system with a similar setup so I can play around with settings without mucking up our network. Only problem is I can't get it configured to even work with XP, which does work on our domain.
When I type \server in the Run box I get the explorer window showing all of the test shares I've set up. But when I try to access them, it says the network path could not be found. Here is my smb.conf file:
[global] workgroup = MAJOR netbios name = VPN realm = MAJOR.COM