Server :: Apache Error Log - Caught SIGTERM Shutting Down
Apr 19, 2011
I have this error log in apache it doesn't seems to affect the system but in 4 o 5 days. I have to restart the server cause its work really slow almost impossible to navigate the web pages hosted on it. This is the last 50 lines apache log
I am having a strange problem with the Opensuse 11.2 Xorg server. Graphics hardware is Nvidia Quadro FX-5000, driver is ver 190.53. 90% of the time, I am getting a seg violation from the Xserver on trying to login via kdm:
...is the error that is present in the "kdm.log" file. So far, it doesn't seem to be user dependent (happens either as root or joe random user,) Again, so far, it only seems to happen with "driver nvidia" enabled in the config file, not with "driver nv" The failure occurs shortly after hitting return on the login screen. After it fails, it starts up a new Xserver, and presents a new login screen. Repeated attempts seem to *eventually* succeed, but 90% of the time, it fails I strongly suspect the Nvidia driver, but I have not been able to find anything documenting any similar problems.
I am not able to install OpenSuse 11.4. This is what happen 32bits: I get up to the login (shell); I type root ad later startx. After this, I get an error complain about fglrx and I get caught signal 11. I have already tried the F4 option during the boot but it did not work. I tried every combinations. 64bits: My computer get stuck as soon as I press enter. my laptop is an HP Pavillion HP dv6-3052nr. I do not have any problem with OpenSuse 11.3 and any other Linux distributions.
I have just installed Ubuntu 10.04 and it works fine. Next, I attempted to install Apache 2.2.16 server on the machine. I was able to get Apache installed but I cant't get it to start. The command I used to get it to start is "apachectl -k start" and got the response "command not found". Then I used the absolute path which is "/home/Administrator/Downloads/apache/bin/apachectl -k start" and got the response"httpd: could not reliably determine ther server's fully qualified domain name, using 127.0.1.1 for ServerName(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80.no listening to sockets available, shutting down". Please advise me on what to do. My eyes hurt from looking at the screen for so long trying different options and reading almost all the apache install instructions that exists. Just ready to have it up and running.
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks 2) Verified all directory and file permissions are at 755 3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere 4) in hhtpd.conf verified <Files ~ "^.ht"> is correct 5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
[root@itsupport ~]# service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down Unable to open logs [FAILED] Iam facing the above error when i restart the service httpd
Our websever, Linux Debian with mysql, apache2, php 5 went down this saturday. Now this monday morning i must find out why this happend. I am loooking for the the correct log files. We know that the server was available by using ping so it is (was) an application failure. We know that the our apache support team had changed the php to improve performance to apc.shm_size=192M (a couple a weeks ago) because couple a weeks ago we got a "Unable to allocate memory for pool" error message. Our server is running on a Vmware Server version 3 as virtual machine with sufficiente CPU and RAM resources. Where and which log files must be checked to avoid future downtimes.
I installed debian 7 and apache 2.2 with virtualhosts. I'd like to run CGI, but always get internal server error. i tested it with a simple test.cgi file.I got this in apache error log.Wed Sep 30 21:39:02 2015] [error] [client 192.168.0.156] Premature end of script headers: test.cgi
When is switch off "Addhandler cgi-script .cgi" in the config file i see the code. Permissions are 755 on the whole directory. I have checked a2enmod, the modul is loaded (sudo a2enmod cgi)..here are the part of config files :
Our websever, Linux Debian with mysql, apache2, php 5 went down this saturday. Now this monday morning i must find out why this happened. I am looking for the the correct log files. We know that the server was available by using ping so it is (was) an application failure. We know that the our apache support team had changed the php to improve performance to apc.shm_size=192M (a couple a weeks ago) because couple a weeks ago we got a "Unable to allocate memory for pool" error message. Our server is running on a Vmware Server version 3 as virtual machine with sufficient CPU and RAM resources. Where and which log files must be checked to avoid future download times (it is our Company web page!!!!)
I am in the process of migrating my old server into new Linux new server. As part of the , apache configuraton is one of the process . i have installed http with yum. i added some test dir like /date/test underwhich i created one test.html. When i start apache , it says Starting httpd: Warning: DocumentRoot [/data/test] does not exist.i am not sure about it. I have directory exists. however it shows the error message.
I run Linux RedHat and want to find out how can I replace the standard Apache 503 error page with my own? This is my configuration in the httpd.conf file for error pages. Can I just edit the HTTP_SERVICE_UNAVAILABLE.html.var in /var/www/error directory and replace the content with my own , or how can I accomplish my goal?
I was unable to access my dedicated server for few minutes. I have checked the apache error logs and found below notice: [notice] caught SIGTERM, shutting down I have tried to search from Google but could not find much information about this error.
My httpd error_log says the following error while running the htpasswd.pl [Thu Jun 24 08:25:54 2010] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Jun 24 08:25:54 2010] [notice] Digest: generating secret for digest authentication ... [Thu Jun 24 08:25:54 2010] [notice] Digest: done [Thu Jun 24 08:25:54 2010] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations [Thu Jun 24 08:26:01 2010] [error] [client 188.8.131.52] (2)No such file or directory: exec of '/var/www/cgi-bin/htpasswd.pl' failed [Thu Jun 24 08:26:01 2010] [error] [client 184.108.40.206] Premature end of script headers: htpasswd.pl
Also the apache shows this error in the webpage. Internal Server Error. The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.2.3 (CentOS) Server at 220.127.116.11 Port 8284
I am using the htpasswd.pl script dwoloaded from net. I can run the perl file using the command line and gets the sytax OK message. The contents of te htpasswd file is as follows: #! /usr/local/bin/perl -T # htpasswd.cgi by David Efflandt (firstname.lastname@example.org) 8/97 # Last update 10/4/99 # Update password file from the web for use with user authentication. # Stores each line in the format: username:crypted_password .....
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info: monitored server: CentOS 5.3 2.6.18-128.1.1.el5
I am using rhel5 with ip 192.168.0.254.i am using rhel on vmware 7. when i run links 192.168.0.254 then i got error "bash : links : command not found" i want to know why this error is showing? when i use red hat without vmware then there is no problem.
I don't mind that apache logs "rotate". By that, I mean that periodically the most recent log is renamed "*.1" and the older logs are bumped up a number In my particular situation, I do mind that the log that was "*.4" is deleted rather than being renamed to "*.5" when that periodic renaming happens.
I know most of the other /var/log files have the same behavior. What does this? Can I change it so my apache logs are "rotated" up but aren't deleted? I know this will take some hard drive space, but I have a lot of it.
But unable to catch the SIGTERM signal if I do shutdown, as man pages says shutdown genrates the SIGTERM and SIGKILL signals, but we cant handle the SIGKILL signal. My code is working fine if I genrate the SIGTERM signal by Kill command, and also for SIGINT signgal genrated from the CTRL+c key.
Here is my code:
/* Example of using sigaction() to setup a signal handler with 3 arguments * including siginfo_t. */ #include <stdio.h> #include <unistd.h> #include <signal.h> #include <string.h>
ok well i installed Ubuntu 10.10 like 2 weeks ago on my computer and I have Spent like A week and a half trying to shut down the X Server. I am trying to install an nvidia driver to my computer... all of the option and ways to do it would be helpfull... any more information needed i will give to you (NVIDIA-Linux-x86-260.19.44.run)
I tried creating a virtual server in apache and it got created successfully. (I also added a zone in dns for that domain successfully) However, when I try opening that domain in my browser, I see a popup window which asks me what to do with "default" which is a php file type.
I dont see the index.php which should actually open. What do I do to make the php files display correctly?
I have Ubuntu Server 10 installed on my Desktop and it seems to shut down every night, requiring me to turn it on each morning. Is there any log/place I can check to figure out what's causing the shutdown?
I am accessing a linux server remotely from my putty. I started the server and now I want to close the command line. when I do cntr+c or cntr+z it kills my server aswell. how will I close my terminal without closing my server? I tried cntr +d but it is not doing anything
I want my server to automatically shutdown at 23:59 and startup at 8:00. The startup is handled through by bios but the shutdown is to be managed through cron. I thought I had this working, I actually swear I had it working because I thought the uptime command showed the appropriate uptime. I happened to be up and was streaming a movie from my server when at the time it should've shutdown it actually just restarted. If I run the shutdown -h now command by itself it works well but the scheduled command just restarts the server. Here is the what is shown when I enter crontab -e.
I 10.04 32bit server edition on a box I had lying around, set it up for samba+upnp, and everything was going great.
When rebooting, the server now turns the monitor off, and I'm not sure if anything's loading. I see the initial dell splash screen, and hear the hard drive start to run, and then the monitor goes into standby.
I am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
My webserver accesses a backend mySQL server using CentOS5
The last week, I have been getting a "page Load Error" on my web server whilst others told me they are getting a "broken link" error when they try to access my web site. It has been working fine for the last 12 months until last week.
ADSL, modem and router okay according to service provider (verizon)
I can ping my IP address and my domain name.
# netstat -tap
shows http and https both processes running.
# service httpd restart no issues
I shut down firewall and tried again, but got the same "page load error".
Weird error I have here with apache, the stock version that comes with CentOS 5.5 (httpd-2.2.3-43.el5.centos). A user wants to be able to download files within his homedir through the web. Most files work just fine. However, he recently discovered that files ending in .vcf produce the following error when trying to click on them via the IndexListing on the web page: