SUSE :: Mail Bouncing - Xx@xx.com SMTP Error From Remote Mail Server After Initial Connection
Aug 30, 2010
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: email@example.com SMTP error from remote mail server after initial connection: host [URL] [ip address]: 50 Access denied...
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
firstname.lastname@example.org SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
I am able to telnet to the server via a remote connection, but for some reason, it will not accept mail. ere is the bounce back email I am getting.Quote:This is the mail system at host smtp.mydomain.net.I'm sorry to have to inform you that your message could notbe delivered to one or more recipients. It's attached below.For further assistance, please send mail to postmaster.If you do so, please include this problem report. You candelete your own text from the attached returned message.The mail system
<email@example.com>: temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/bin/perlbin/vendor/spamc: No such file or directory Reporting-MTA: dns; smtp.mydomain.net
I am running CentOS 5.5 and am trying to get Nagios to send out Emails.
After a bit of reading I have the following in my /etc/mail.rc file:
Code: [root@linux ~]# cat /etc/mail.rc set ask askcc append dot save crt ignore Received Message-Id Resent-Message-Id Status Mail-From Return-Path Via set smtp=172.29.1.76 You have new mail in /var/spool/mail/root [root@linux ~]#
I have Nagios setup correctly and introduced an error to generate an Email but nothing has come through.I suppose I have two questions:
1. Is mail.rc setup correctly? 2. Can I test to see if mail.rc is working correctly?
Trying to transfer to claws mail from kmail, I have problem in sending emails: It doesn't send email through one of my accounts (a university account) and says: An "error happened during SMTP session". My other university account works!
We have one major problem in our dedicated online mail server. In this mail server both sendmail and qmail running for send and receive mails. In this server I can able to send mail to other domain like Gmail and yahoo its works fine. But I am not receiving any mails from other domains. And automatically I got telnet localhost 25 connections refused error. When I send mail from my webmail I got like this error Connection refused Server replied: 111 can't open SMTP stream. This is I got when I send mail from webmail. I am using centos 5.2 version.
Installing PHPMailer v.5 (server running php5) with SMTP function. I have installed the main files in mail directory such as: # class.phpmailer.php: This is the main class file which contains the various email functions.# class.smtp.php: This additional class allows SMTP authentication.I don't think I need class.pop3.php as I'm sending mails server side (smtp)and should be accepted by most IP's pop3 servers.
All my mail functions work great with SMTP and I can send and receive. My problem is that my recipients only receive mail from admin@domain instead of "My Website Name" Sounds simple enough, I know and I have made adjustments to class.phpmailer.php and have inserted my specific mail attributes for my site such as mail address, mail from, smtp server, user/pass for smtp,etc.PHP Mailer v5.0 class.phpmailer.php is a very long script and I only found a couple of places to put the FROM address as follows:
I'd like to have anything that tries to send mail locally on my machine (including crontab reports for instance) to be handled by my ISP's smtp server instead of my machine acting like it's own SMTP server. I've spent around 15 hours trying to figure out how to do this and I keep either getting into things that I don't understand, or hitting brick walls (for instance, I found nullmailer, but after installing it, it seemed like it would only work on Unix) Is there an application like nullmailer which I can use as my MTA to forward all internal mail to a different SMTP?
I tried setting up evolution mail incoming worked fine outgoing Big No, so I install Thunderbird and it worked like a charm. Then I decided I liked Evolution a little more and wanted to see if I could get it working and came across this. Firstly I entered all my details correctly double and triple checked. Look at my user name now when i try sending an email I get this? Why has my email changed?
I'm trying to set up my postfix server to relay mail (via a php cms) using Gmail's smtp on my account, but for some reason, Gmail returns an error code that StartTLS must be sent first, my postfix main.cnf file can be found at pastebin, because of this forum's text length I cannot paste my postfix main.cnf file as can be seen I have everything set and configured for Gmail, but postfix (for some unseen reason) can not send StartTLS. [URL].
my postfix to send and recive external emails, but many recive in trash folder.Other programer say me that is need some configurations in postfix with and dovecot to work, but i dont know what!This is my first time configuring a linux server at this week.
my main.conf sample_directory = /usr/share/doc/postfix-2.3.3/samples readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES
I am setting up a CentOS box as a NAT firewall that needs to also send mail. It needs to send this mail using an outside provider's SMTP. The provider requires SMTP over SSL. None of the machines inside the NAT will ever send mail except via the provider's SMTP nor will they ever receive mail except to local clients via the provider's IMAP servers.
So for the example the machine is TESTMACHINE. There is one internet facing ethernet port connected to a DSL modem via pppoe.
The SMTP it needs to send mail via is mail.host.net which requires SMTP over SSL (port 465) and username/password authentication.
The sendmail documentation is quite confusing on how to get this simple setup operating, so an example showing the appropriate changes to sendmail.mc and other require config files.
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
I come back to everybody cause I don't find an explicit how to do this!In our internal network, I've created an email server with Postfix and Dovecot. (Just for internal domain, no needed to go outside)
But I've some server which use linux too. All are on CentOS 5.5.I would like to configure these servers to use my internal mail server for send email, and not configure sendmail or postfix on each server.
What I've to do exactly on each servers to use it? I search on the web but I don't find something very explicit
This is the current setup that we have: We have approx 20 clients who pay us to send out a type of e-mail called an E-Blast to their customers. We currently are using 5 Microsoft Windows Virtual Servers to do this. The problem is that those machines are starting to break down. There are times that it will take Microsoft Windows approx 9-10 hours to complete 1 job. This is way too long. We want to move away from Microsoft Windows for this particular type of job as it seems there are more customers who are wanting to use this type of advertising.
It seems that using a Linux Server "Command Line or Shell" environment would be the best way to go as there is no GUI like Windows. Since there is just text...that is something that would/should process very, very quickly.
I am in the process of setting up a new SMTP outbound mail server. This is the current software & configuration (what is installed on this new machine):
All of the customer data (Names, E-Mail Addresses, etc that these e-mails are going to) are currently loaded in a Microsoft SQL Database.
My machine that I am using is plugged into the DMZ. I have 1 ip address for the 1 network card. I have also added/bound 4 more ip addresses to that network card.
I have configured Postfix for Multiple IP Addresses.
I can, from the command line, send successful test e-mails and receive them in my personal account.
As far as I know everything is setup correctly. I can and will post requested information so that it can be verified that everything is setup correctly.
Here are a couple of my questions:
Ensure that I have my Network / Interfaces file and my Postfix's Master.cf/Main.cf files setup correctly?
How can I setup this server to be an Outbound SMTP server and get it to use all 5 of the IP Addresses to send these e-mails quickly?
What can I use to check and ensure that this server is in fact sending out emails on all 5 IP
Addresses (I heard that there is a program named "Postal" that may help in determing this).
I have one Centos Server and I want to forward root mail to 1 external account: [URL] I installed sendmail and created /root/.forward with this content: [URL] and I sent a test mail with this command: /usr/sbin/sendmail root <prueba.txt But nothing was forwarded.
After that I ran the same command with the verbose option:
/usr/sbin/sendmail -v root <prueba.txt
And this is the output:
root... Connecting to [127.0.0.1] via relay...
220 localhost.localdomain ESMTP Sendmail 8.13.8/8.13.8; Wed, 3 Nov 2010 21:09:39 -0600 >>> EHLO localhost.localdomain 250-localhost.localdomain Hello myfriend [127.0.0.1], pleased to meet you 250-ENHANCEDSTATUSCODES
For some reason sendmail tried to connect to example.com smtp server and couldn't reach it. I am sure this is because the smtp server for example.com domain is not example.com is mail.example.com. Besides mail.example.com requires authentication, username , password and the smtp port is not the default 25 is 9999. configure sendmail to forward root mail to a smtp server that requires authentication, username, password with a not the default 25 port?
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user firstname.lastname@example.org then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
Iv setup a postfix mail server.. and setup my MX records within DNS. I configured the posfix mail server with the Mail accounts.I sent the accounts a test message. They end up in the Maildir for the user. But for some reason i cannot POP the mail server from a client. I can telnet to the SMTP server.. But cannot telnet to the POP3. Iv opened the ports in the firewall correctly. and even tried disabling the Firewall but when i try to Telnet to port 110 or POP port 110 i get an error saying "connection refused"
i administer an isp mail server on centOS my client has a mail server on redhat, the client can send mail successfully but if i try to send mail from outside i get "connection refused error" from my /var/log/maillog can anyone help this has been pending for long and im under fire!!
There is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.