SUSE / Novell :: Running Out Of Space Creating Virtual Machines OES2 Sp1 On 10 SP2 Xen Host Serve?
Mar 17, 2009
I have a quad cpu with 8gb ram running SUSE 10 sp2 on a raid 5 XEN host server. I have created a 250 gb partition GWMAIL in the extended partition to be the disk space for the first virtual machine OES sp1 with groupwise 8.0. I have downloaded the OS .iso's to the desktop of the host server to use for installation. When I begin to install, it hangs for 5 to 10 minutes then gives me an out of space error.
View 2 Replies
ADVERTISEMENT
May 14, 2010
Yast2 appears to be broken. Whenever I open the YaST control center and attempt to install new software, I am greeted with this error message. When I click on the "Install New Software" shortcut from the start menu, nothing happens.
I researched this error message and found that apparently I can install software via Zypper, but all the commands to enter in the terminal result in a message about an unrecognized command.
OpenSUSE 11.2 64-bit
View 5 Replies
View Related
Jul 23, 2010
We got a new server with 2 network interface cards with 4 MAC addresses in total. We would like to run two virtual machines (vserver1 and vserver2); one should connect via eth1, the other via eth2, and the host (mainserver) via eth0. The content of /etc/network/interfaces is as follows:
[Code]....
A connection from mainserver to vserver1 or vserver2 is not possible; a ssh connection from mainserver to vserverx ends with a login to mainserver.
View 2 Replies
View Related
Jul 9, 2011
I've installed VirtualBox OSE and have a couple of guest OS setup. I am running Ubuntu 11.04 and VBOSE version 4.x (the most current). Now this installs the guest OS virtual harddrives to a folder in my home directory. How do I get other users on the same host machine access to those virtual machines within VB? Currently logging in as another user and going to Applications/Accessories/VirtualBox OSE ... the list of guest machines is empty save of course on my login.
View 3 Replies
View Related
Oct 4, 2010
I'm looking for virtual machine software that supports dual monitors on a Linux guest with a Windows 7 host.VirtualBox supports dual monitors only for Windows guests. VMware Player was extremely slow, so I gave up. I'm not sure it supports dual monitors, anyway. Can anyone recommend a product for what I want to do?
View 1 Replies
View Related
Feb 26, 2009
I am having dual boot system Opensuse 11.1 and Windows vista. I have allotted about 5 GB space to home partition. Now sometimes I copy/move files from Windows partitions to /home, this is easily done. But when I restart the computer, It hangs and KDE is not loaded giving reason that disk is out of space. I have to work on commandline and delete some files from /home to free some space,only then I can restart the computer normally. This is very annoying.When I copy/move files then Opensuse should immediately give me a warning.It seems nonsense to not start kde.
View 6 Replies
View Related
Oct 4, 2010
I recently tried a frugal/poor mans install of knoppix that I placed in a folder in the root partition of /home (hda7) in opensuse 11.3. I decided to delete the folder and contents. The hard drive was busy for several minutes and after it was finished, I checked the disk usage and found that / was at 97% capacity, up from what was 10gig of free space. I could not find any traces of the deleted folder or its contents, so I used puppy linux and ran e2fsck on the / partition. Puppy linux reported 1.9gig free space and opensuse reported .5gig free space. My concern is if the deleted folder is taking up space in the root partition that I can not locate and why the difference in reported disk space usage in hda7. Also, if more packages are installed, where are they placed (/ or /home)?
View 3 Replies
View Related
Jan 20, 2010
My external storage failed and 1 file system related was damaged. When booting OS, it stops on fsck with the damaged file system. Thus the OS will never be up and running, no matter how long I wait. My question is, how to skip the fsck on the damaged file system? Since OS can not be booted up, I have no chance to change /etc/fstab. I just want to boot up the OS and remove the damaged file system manually.
View 1 Replies
View Related
Jul 22, 2009
I cant get my linux server ( centos5 ) with virtualbox run 2 virtual machines in headless mode. Only one machine gets network connection. Can anyone tell me how to make 2 or more virtual machines work with 1 eth-port in headless mode using virtualbox ?
View 1 Replies
View Related
Aug 26, 2009
I have been trying to find a virus protection software that will integrate with my kernel 2.6.16.60-0.42.4. I tried Linuxshield, but the version of kernel I have is too new. I spent two days trying to make it work, but it gives me an error continually, no matter what I do when I try to install it. If there is anyone on the same kernel version that has had success with a virus protection software.
View 11 Replies
View Related
Jun 27, 2009
First off I am new to Linux and fairly new to working in Networking and Server config's. I have been using Windows for years and have been learning Windows Server 2003 as I have a Technet account, I can get any MS software. I would like to learn Linux and use this as my Server environment. My project looks like this: I have a Quad core, 8gb machine. I want to install a distro of Linux (server or desktop) and run Virtual Machines on it.
My perferred way would be to use Virtual Box but I could use VMware products if that was better. I would like to run WS2003, WS2008, Linux Distro and anything else that will run in a VM. I can figure out that part pretty easily. I want the Linux host machine to run all these VM's and access and use them on my MAC remotely. I have done some research on ESXi as well, but I don't think my Hardware is going to support that. My exact PC spec's are:
AMD x4 940
8gb DDR2
Gigabyte MA770-UD3
2 Velicoraptor Drives
GTX 260
I will be dual booting this machine on one of the Raptors for gaming as well.
View 4 Replies
View Related
Aug 10, 2010
I dont want to wipe the whole drive, and i don't want to delete only particular files. I want to completely destroy all data in free space.I've found some articles about secure-delete package for linux that would allow erasing freespace with the command 'sfill,' but I can't find it in the repositories nor through google. This would be ideal but it seems maybe it's debian only.
View 2 Replies
View Related
Jan 11, 2010
I have a shell script which is configured for the user. The main task of the shell script is to email certain user with a particular result.
The shell script runs perfectly when run from a Konsole terminal and configured through a crontab generates empty entries.
Below is my crontab for my user.
Code:
# DO NOT EDIT THIS FILE - edit the master and reinstall.
# (/tmp/crontab.XXXXSyNyp1 installed on Wed Jan 6 09:14:14 2010)
# (Cron version V5.0 -- $Id: crontab.c,v 1.12 2004/01/23 18:56:42 vixie Exp $)
#!/bin/bash
[Code].....
View 3 Replies
View Related
May 2, 2009
We've been experiencing sudden host server crashes minutes after starting a fourth virtual machine. Our setup looks like:
Dell Poweredge T300
1 x Intel Xeon X3323 Quad Core 2.5 ghz
16 GB Ram
CentOS 5.3 (64 bit)
Server is running a stripped down version of CentOS 5.3 (64-bit), running only the built-in Xen Virtualization Environment. There is no other services running on the server (not samba, httpd, sendmail, cups... nothing except Xen) We've created several virtual machines, and as long as we don't start a fourth virtual machine everything runs smoothly (impresive hardware).
Each virtual server is configured as:
PARAVIRTUALIZED
1 Virtual CPU
1 GB RAM
However, 5 minutes or so after starting a fourth virtual machine, the entire host server crashes and restarts itself. Are we limited by the number of cores on the host machine CPU (4 cores)? 1 for the host and 3 for virtual machines? We've read in forums about other Xen setups running up to 11 virtual machines on less powerful hardware? (a dual core server). Should we be using FULLY VIRTUALIZED virtual machines instead? Is the number of XEN virtual machines in fact limited by the number of cores? If so, how can someone run several virtual machines on a single core host?
By the way, we were replacing a previous Dell Server (Poweredge 2600 with 512 MB Ram and a single Xeon single core processor running Open Virtuozzo). We were able to run up to 16 virtual machines at the same time. Of course none of the machines endured hard work (testing environments, etc). But hey, my point is that we expected to get a much higher number of virtual machines on this new hardware.
View 8 Replies
View Related
Nov 28, 2009
Instead of logging out and in again as root, I tried running the file manager dolphin through kdesu, but this was very slow and crashed eventually.
View 1 Replies
View Related
Jul 7, 2011
I have currently have a PC with 16GB of RAM. I will be running multiple virtual machines using VirtualBox. Would I get the best performance from running the VMs on a Linux host, or a Windows host?
View 4 Replies
View Related
May 22, 2011
I am trying to build a file server with RAID 5 over a couple of 1TB HDDs, to serve about 10 client machines using Ubuntu Server. I already own a 22-port switch: HP ProCurve v1810G-24 Switch (J9450A), which I am assuming will do the job. And for the actual server I am thinking of buying: HP ProLiant DL120 1U. Will this hardware suffice, or am I missing something important to get the whole thing running?
View 9 Replies
View Related
Jun 29, 2010
I would like to configure and SAN disk. But I do not have a physical SAN disk. Is it possible to create and configure a Virtual SAN disk and work on it with virtual machines?I have around 400GB of space in my Laptop.
View 7 Replies
View Related
Jul 20, 2010
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
View 4 Replies
View Related
Nov 18, 2010
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies
View Related
Jul 5, 2009
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
View 2 Replies
View Related
Sep 8, 2010
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies
View Related
Sep 16, 2010
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies
View Related
Nov 4, 2010
I have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies
View Related
Aug 23, 2010
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
View 2 Replies
View Related
Feb 1, 2010
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
View 3 Replies
View Related
Oct 13, 2010
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies
View Related
Jul 19, 2010
New Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies
View Related
Feb 4, 2010
The software use to work well here, but now I got this when I try to run it
sparky: error while loading shared libraries: libtk8.4.so: cannot open shared object file: No such file or directory
But I can not find it.
I also tried
cd /usr/lib
ln -s libtk8.4.so libtk.so.0
ln -s libtcl8.4.so libtcl.so.0
but this does not work neither.
View 4 Replies
View Related
Oct 30, 2009
Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies
View Related
