I want to add to the end of a line for a file that has the /usr/X11R6/bin/X in it. The /usr/X11R6/bin/X is not at the end of each line. I need to add "-nolisten tcp" to the end of each line containing the the /usr/X11R6/bin/X string.how can this be done in a script?
View 5 RepliesHow can I list the following with grep. I want to extract 2 lines fron a text file The fixed known part if it exists will static text and the text line after it will change.
A sample file
.
.
textline1
[code]....
If the fixed part does Not exist how can I return error code 1
I have a dataset (see example below) that I would like to go through and copy all lines containing a certain string ("LGIG") plus the line immediately following that line to a new file. I have no problem grepping lines containing the string LGIG but I'm lost how to translate that to line number and shift up one line number for each instance of that string.
Example input file:
[code].....
I am trying to get a word from a line using sed. Following is the line which I want to use.
inet addr:10.245.86.15 Bcast:10.245.87.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3dff:fe01:55e1/64 Scope:Link
From the above line, I need the ip address like 10.245.86.15 only.
I need to simply replace a 2 lines, or one and I'll run each command separately, in a eps file. I know I can grep the line and pipe that into the sed but I would like to keep this in a sed command. I can use sed /s and get it if I copy the section out of the file and paste it. Really just trying to rewrite the boundingbox coord's in eps files.
sed -i 's/%%BoundingBox: 00 00 88 487/%%BoundingBox: 24 315 288 487/g;s/%%HiResBoundingBox: 00 00 88 487/%%HiResBoundingBox: 26 315 288 487/g' someeps.eps
cat filename| awk '{print $3}' | cut -c -3 | cut -c 2- | grep 66
this returns the lines containing "66" at 2nd 2 characters of 3rd column of a line, now i need complete lines for this, how can i do it?
Here's my current regular expression(used in sed):sed 's///!Start.*//!End//g' in > outThe only problem being that the wildcard . does not work across multiple lines,
View 1 Replies View RelatedThis has to also show the line count. I can get it to show the files but not the line count. What is the single command used to identify only the matching count of all lines within files under the /etc directory that contain the word „HOST? List only the files with matches and suppress any error messages.
View 4 Replies View Relatedremove a line starting with specific word with grep. Here is what I found
grep -v '^cc$' data.txt
Here I remove all lines with on 'cc' in that line. But I want the result write back to data.txt
I try several ways
grep -v '^cc$' data.txt > output.txt # works but to another file
echo `grep -v '^cc$' data.txt` > data.txt # didn't work, all carets gone, become one line
grep -v '^cc$' data.txt > data.txt # data.txt is empty after running this
How can I save the result of grep to the input file?
I am trying to declare an associative array on the command line. I get the following error, could somebody explain this and reslove
$ declare -A score_array
-bash: declare: -A: invalid option
how to pass an array as a command line argument in a shell script?
View 5 Replies View RelatedI've recently had trouble reinstalling my Ubuntu system as I was getting various unusual errors as described in my old thread here. I thought it was probably something to do with my RAID-0 array which was pre-installed on my laptop from purchase being corrupted or something like that (if it's possible). I decided to simplify things for myself (not understanding RAID arrays much) so I just removed the RAID array and installed Windows and Ubuntu on the now separate hard disks. It worked fine.
I noticed quite a significant performance drop, however, with even Ubuntu boots taking longer than 30 seconds despite my laptop being both high-spec and only a few months old. Windows, as you can imagine, was dreadfully slow. I wasn't entirely convinced that this was entirely due to the loss of the RAID array - as even low-spec laptops with presumably no RAID arrays are supposed to boot Ubuntu in under 30 seconds apparently - but I read that RAID-0 arra
Here is the issue. I am reading in a outside text file and putting in the string on that line into a char array that is already allocated.
Code:
int main(int argc, char *argv[])
{
[code]....
I need to kind of grep within grep. My input file would be something like:
[Code]....
and I need to find the first occurrence of hello before MY PATTERN (hello 9008 in this case), so the output should be:
[Code]....
I have a RAID 5 array, md0, with three full-disk (non-partitioned) members, sdb, sdc, and sdd. My computer will hang during the AHCI BIOS if AHCI is enabled instead of IDE, if these drives are plugged in. I believe it may be because I'm using the whole disk, and the AHCI BIOS expects an MBR to be on the drive (I don't know why it would care).
Is there a way to convert the array to use members sdb1, sdc1 and sdd1, partitioned MBR with 0xFD RAID partitions?
This _almost_ works. I just can't quite get it to honor the spaces.
Code:
#!/bin/bash
profiles=(
PROFILE_ONE
)
PROFILE_ONE=(setting1 "setting number 2")
[code].....
I have a NETGEAR ReadyNAS NV+ with four 1TB drives in a RAID-5 array. This is our primary file storage. This has previously been backed up to a hardware RAID-0 array directly attached to our Windows server. The capacity of this backup array is no longer sufficient. So the plan was, take a bunch of 200GB to 320GB drives (And a 750) I had kicking around, chuck them in a couple of old SCSI drive enclosures I have collecting dust, attach them via IDA/SATA-to-USB adaptors to a USB hub, attach that to the server, create a JBOD array spanning the disks, and back up the NAS to that. Performance is not an issue as this is just to be used for backup, with the idea being as near to zero cost as possible (Spend so far = NZ$100�ish).
The first hurdle I struck was Windows not supporting Dynamic Disks on USB drives (Required to create a spanned volume). At first I resisted using another machine (i.e. a machine running Ubuntu) as I didn't want to dedicate a piece of hardware to backing up the NAS. I then decided it would be acceptable to do this via a VM, which is what I've done.So I have 10.04 running under VMWare Server 2.0.2 under Windows Server 2008 R2. The disks are all presented to the VM. I wasn't sure if I was going to end up creating the array under LVM or something else, but I noticed Disk Utility has an option to create an array, so I tried that. When I add two 250GB drives, the array size is 500GB. When I then add a 160GB drive, the array size drops to 480GB. Huh? If I keep adding disks (Regardless of order) the final array size comes out at 1.8 TB, as per the attached screenshot. Now with the following drives, I expected something more like:
160 + 250 + 250+ 750 + 250 +200 + 200 + 250 + 320 + 250 + 320 = 3.2TB
Am I missing something or making a false assumption somewhere?
I have an array called arrayini which stores numbers. I want to take log to the base 2 of each of the numbers in that array and put it in file called result. I've used the following code to do it.
Code:
size=${#arrayini[@]}
for ((i=0;i<size;i++))
do
echo "scale = 12; l(${arrayini[$i]})/l(2)" | bc -l
done >result
It works fine but its taking pretty long to calculate since I've got about 230,000 items in the array. So I decided to store the result into an array hoping that it'd be faster. I tried the following code. arrayresult is where I try and store the result. The code doesn't work because of the second last line.
Code:
unset arrayresult
size=${#arrayini[@]}
for ((i=0;i<size;i++))
do
arrayresult[$i]="scale = 12; l(${arrayini[$i]})/l(2)" | bc -l
done >FILE2
There is a syntax error clearly.
I am trying to dynamically delete and add information into the array "blah"
Code:
int blahsize = 1;
char** blah = (char**) calloc(blahsize+1,sizeof(char*));
Adding information:
Code:
blah[1]=stuff1;
blah[2]=stuff2;
code....
I have trouble converting a short array to a char array
Code:
short pShort[4] = { 0x41, 0x42, 0x43, 0x44 };
How to convert this to a char array?
I'm writing a PHP program. I've encountered a problem; in the following code I try to pass $_POST['delete'] which is an array as the value of a hidden input to some form, but it doesn't do so.there's something wrong with converting PHP array into HTML array. I'm sure that $_POST['delete'] is not null and is a real array.
echo '<input type="hidden" name="delete[]" value="'.$_POST['delete'].'" />';
Just install Oracle on Fedora 14, and start facing challneges with PATH, etc. So want to edit my ini file to configure all PATH variable correctly. I see bunch of directories in /etc/rc0-6, which one hold ini file I can put some var assignments.
View 3 Replies View Related(I am using vector() and matrix() functions from "Numerical recipes in C".)There are 100 numbers to be stored in 2D array of 10 rows and 10 columns.100 numbers are stored in a 1D array.I get "segmentation fault" at the line indicated in the segment of my code below:
Code:
:
:
#define size 100
#define nl 1
[code]....
The title pretty much explains this post: How many true Linux users here on LQ (besides me) are under 18? Please explain your poll votes.
View 14 Replies View RelatedI am trying to learn how to use true type fonts in SDL using libsdl-ttf. I am trying to use the font "FreeSans.ttf" but my program prints out the message "Couldn't open FreeSans.ttf." Any way to get a list of what fonts true type fonts exist using C++ and SDL?
View 2 Replies View RelatedWhen installing OpenSUSE 11.4 32 bits (NET-installation) no MS True Type Fonts were installed during the additional online update. They weren't just there. So for instance LibreOffice is unusable for me. How do I still get them?
View 9 Replies View RelatedAccording to this site, Red Hat Enterprise Linux is based on Fedora. Is this true?
View 2 Replies View Relatedwell i am on ubuntu karmic koala and i have been trying to install true audio codec ttaenc. the file we have is ttaenc-3.4.1-src this came directly from aleksandr djuric who looks after true audio now he tells me to use
Code:
Compilation and installing.(your work dir) - the path where you have unpacked the codec sources
$ su -
# cd /(your work dir)/ttaenc-3.4.1-src
# make; make install
to install it so i modified that for ubuntu and this is what i got
[Code]...
I have now 11.04 installed and using Gnome, everything is how i want it. But there is one little thing.
If i connect to a server true the classic Connect to server button in places. I expect that it opens with nautilus but it opens Firefox.
I have already looked gconf-editor in the url-handlers and changed it but there is no difference. Is there a fix?
This line if [[ $hamachi_reachable = true && $lan_reachable = true ]]; then is always evaluating to true. I gave two ips that are not valid, so that both variables would become false yet the whole expression is evaluating as true. With that set -x in there, I get this output.
Where am I going wrong?
Code: