i hav configured samba share in RHEL 5.4 , it can be accessable from other linux machine but i want to access it from windows machine, how can i do it? i also want want to know that in RHEL my partitions are in ext3 format, so how can windows can detect this partition, Is samba share is independent of filesystem on either machines
i hav configured samba on windows server 2008 , how can i mount it on linux machine
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
Client OS :- Windows XP Server OS :- Centos 5.4 Service :- samba or smb
Actually i want to take a back of windows xp's users data which on d: or etc and that backup i want to store in samba share which i made on my centos 5.4 . To do this we need to mount samba share as local drive then any script or any software can detect that share easily in that drive.
I am not able to configure nfs mounted disk for shareing samba. i have a server X. which configure samba for windows XP client this is done. now i have export X server samba share disk to mount Y server using nfs. this is mount and ok. but i don't share this disk using Y server samba configure.
Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
if i try to connect to my samba server ( share ) from my windows xp ( or vista, i've tried both ) it says, that the network share cannot be found. i've installed all necessary rpms on my fedora 10, necessary for running a samba server:
I've got my Samba shares up and running. I can stream files from the server, I can create files on the server, and I can copy files from the server.
Running a Windows program (from a Windows box) directly from the Samba server, however, is turning into a nightmare. I'm getting Access is Denied errors from the Windows box, yet I can copy/create/etc from the entire directory with no problems.
Are there any special permissions I need to run EXE files from a Windows box, located on a Samba share? I've already chmod'd everything to 777, and I show full access when ls -Z is used.
ServerA has an NFS Mount to ServerB at mount point /home/qlogger/logs
I can cd to /home/qlogger/logs on ServerA and see the contents as they would be on ServerB (NFS Working with proper permissions rw).
I have a samba share setup on ServerA to share the NFS Mounted Directory (/home/qlogger/logs)
I connect with my windows host and am able to view the files and folders. I can create folders just fine however; when I go to copy a file from the windows machine to the samba share I receive a message saying the file is locked.
I have disabled oplocks in samba and the problem still persists.
I want to mount a samba share form another Ubuntu pc.
With nautilus I can do: smb://xxxxxxx;firstname.lastname@example.org/sharedfolder/ And i can browse the shared folder without problem
but I want to mount it. I have tried:
Code: user@compu:~$ sudo mount -t smbfs //192.168.1.12/sharedfolder /mnt/folder -o username=username mount: wrong fs type, bad option, bad superblock on //192.168.1.64/esco3, missing codepage or helper program, or other error
Im aware I'm not passing the password and I was hoping it would ask me. Also I'd like to store all that info in my computer and try to auto mount the shared every time i use the pc.
One problem I'm having is with getting some apps to access NAS hosted files and folder over samba. Two examples are photo managment apps and backup apps, which seem to only want to work with local files and folders.I have come across a number of articles about cifs, autofs, gigolo, fstub, etc (including the autofs community documentation). But so far I've had no luck in auto mounting a samba shared resource as local.
Can anyone point me to a definitive tutorial, or provide an explanation on how I might accomplish auto mounting samba shares?
"My network" is behind a firewall inside a larger windows network with AD. My network has a Debian Server with samba 3.2 running. There are 50 users on my server. Users has accounts on the win-server, but is only using this to read mail. How do I mount a windows share on my Debian server in a way that all my users can read and write there?
I've began to work on getting my access control, set up properly on my server, and want to create a "my documents" folder for each user I add. I do not want it being part of the home directory and have read everything and still can't seem to get it to work. I've got a second drive that is mounted at /private on my server, with a folder that is underlying on it call users and groups. Then from there is has the exact unix username that I set up in Users and Groups. Ex. /private/user/gary . With Samba, I added the following code:
[My Documents] guest ok = no comment = %u's Documents
I've tried using %u,%U,%S, and the normal username and of all of them, it will only work with the username. I've even used force user. added root to the valid users list and it still gives me access denied or the multiple connections to a single share with multiple user names prohibited but nothing is mounted on this share. On Webmin, it doesn't show any connections to the share. I'm rather at a stumped state in which is frustrating me, because I want to have this so when I go from my desktop to my laptop I have "My Documents" On either unit. Security on the server is set to User because I've searched to see if I can't find a way to make shares visible by a guest but read only to them and when I access them from my log in to make it read write using the "Share" option.
I am trying to mount a file server directory on a client machine. I tried using NFS, but could not mount the share on the client. Several respobses were given to a post on this problem. but I still was not able mount the NFS share. I decided to try instead to mount the directory as a Samba share because I can already access it using Samba from windows, or from KDE or Gnome using smb://fileserver as a desktop location icon URL. When I try to mount the Samba share I get error messages that nearly identical those that occurred with NFS. . Here are some of the setup parameters
CentOS 5.4 on client and server behind a D-Link router server IP: 192.168.0.44 (can ping it client) client IP: 192.168.0.101 (can ping from server)
This is the only error message that these commands have produced in the messages log, secure log or smbd log for either machine. My immediate goal is to set up the simplest possible local mount that will allow Grsync to backup to the file server.
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
i'm trying to connect to the three other machines in my house but am having quite a hard time doing so. i've never had a problem in the past with ubuntu, but, with 9.1 and windows 7, things have gotten a bit harder. i'm running 9.1 and my roommates are running windows 7. i've installed, set up and configured samba and i can see the computers on my network, but any time i try to access either of the drives, it says unable to mount location: failed to mount windows share.
I have sent the last 5 hours (it is now 6am) and I am in no mood for lazy know-it-all'sI have returned begging and crawling back to Ubuntu (I waited a day for 10.10 to be released) and I have again stumbled across why I go back to Micro$oft's Windows.All I want to do it have a permanent share to my nas, which is on my Netgear DGND3300.I can reach it by Place -> Network -> Windows Network -> NAKALEEN -> NAS -> USB_Storagebut for the life of me I can't make it permanent. I need it as all my Movies/TV/eBooks are on this.I have followed every and I mean EVERY option I have found on Google with no luck. From the fstab/mount option to the gvfs option (as you can guess both failed)The reason it is *$&^%$^&%$ me off it that Windows can do it with a couple of mouse presses (Map Network drive). Making Ubuntu a joke in this area.
Server: Ubuntu Server Edition 8.04 /currently firewalled to only allow client ip Client: Ubuntu Desktop 8.04 /currently firewalled to only allow server ip
Same userid and groups set up on on both. I have taken two linux courses and can maneuver around fairly well, but am still pretty newbie at all this. We have loaded Samba on a server and created a Samba share. I AM able to access that share via Windows Vista, but have not been able to successfully mount the share on the Ubuntu desktop via the fstab file. I have tried the following ways: serverip:/path/shareddirectory /net ext3 user,sync 0 0 and the samba way..
After modifying fstab, I reboot. No luck since that either way.Only ONCE after modifying it samba way, I was prompted to enter credentials, but after login I was unable to view the files on the server. From this point on either way, if I run commmand 'mount -a' the response is "Special device serverip:/path/sharedirectory does not exist" Also! I am able to ping client-to-server, but not server-to-client.
I am trying to properly mount a samba share in order to access it from a terminal and run a script that I've written over a folder in the share. How could I do that? I tried smbclient but after successfully logging in I couldn't issue the sh command. Isn't it possible to have it mounted in the /mnt folder like a normal filesystem?
I've just loaded a laptop with Ubuntu 10.04, and I am unable to mount a samba share from an older Red Hat server. The problem first occurred when I tried using "Places -> Network" or "Places -> Connect to server", and the server's log gives me something like this
[2010/08/03 15:40:38, 1] auth/auth_server.c:check_smbserver_security(363) password server 10.100.1.2 rejected the password: NT_STATUS_LOGON_FAILURE [2010/08/03 15:40:38, 2] auth/auth.c:check_ntlm_password(319)
I have a samba share that I mount locally at boot through fstab. The share is writable and if I access the share directly, say with konqueror and smb (smb://hostname/sharename) then I can do anything I want (create, write, delete, edit, files/directories). I have a mount point on my local machine
and I (username dtest) was unable to do anything except read files and create directories trying to do them to the local mountpoint except as root. I figured it would be a matter of
chown -R dtest /shares/mp3
but I was unable to do that even as root, I kept getting permission denied. When I did
ls -alt /shares/ it told me the owner was 1000 and the group was root. Dtest was already a member of the root group and I was able to
chmod -R 774
as root but I still couldn't do anything except read and create directories directly via the mountpoint. Ultimately I solved this by changing the uid of user dtest via kuser and then just chowning my home directory back to dtest. It seems like as root I should be able to change the owner of the directory. I know it's because this is a samba share, but it doesn't make any sense why root couldn't just chown it. Is there another way to change the owner of a directory, or is this set by the machine hosting the samba share?
The scenario like this. I'm working on Ubuntu 10.10. I've enable samba sharing with full guest access enable. In my office I had another server (CentOS 5.5) installed just for me and I've created a Apache VirtualHost which root document pointed to share folder on my comp
This is my fstab setting //my ubuntu computer name/sharing/www /media/www cifs context=system_ubject_r:httpd_sys_content_t:s0,username=username,password=******,iocharset=utf8,fi le_mode=0777,dir_mode=0777 0 0
After label the mount folder as httpd_sys_content_t the Apache web server working in correct way (duno much but at least it can index files and excute some php code so) then the troll come in : if some file was created by my ubuntu (personal comp) then the file would be listed in Apache virtualhost correctly.
But if I'm ssh to CentOS server goto /media/www which was mounted to my unbuntu computer. Then type command like $mkdir something Suprising that folder ./something could not be accessed by Apache anymore except I remount by umount and mount it again or "setenforce 0" What is wrong with my system can anyone point me out of this headache
I have a computer running Ubuntu 10.10. I am using it to share many hard drives connected to it. I am using Samba. I have successfully shared many folders to one Windows user. I am attempting to share other folders within the shared folders to another user as read only but have not had any success. When I attempt to connect to one of the shares from another computer running Ubuntu 10.10, logged into an Administrator account with the same username and password which I setup on the Samba share I get the error: "Unable to mount location" "Failed to mount Windows share"
I am using mount.cifs to mount a remote samba share (both client and server are Ubuntu server 8.04) like this:mount.cifs //sambaserver/samba /mountpath -o credentials=/path/.credentials,uid=someuser,gid=1000.I mounted a user from local system with username and password with mount.cifs but the problem is that the user is part of multiple groups on the remote system and with mount.cifs I can only specify one gid. Is there a way to specify all the gids that the remote user has?
Mount the remote samba with multiple groups on the local system?Browse the mount from 1) with the terminal since I want to pass some files from samba as arguments to local programs.which runs through gvfs; but the newer gnome does not write to disk the ~/.gvfs anymore so I can't browse it in terminal. And the last solution would be NFS but that means that I have to synchronize the uids and gids on the local system with the ones from the server.