Red Hat / Fedora :: Ldap Error Messages ?

Mar 29, 2010

What do these error messages mean.

View 9 Replies


Red Hat :: Configuring Ldap Client / Getting "error Ldap_sasl_bind: Can't Contact LDAP Server?

Mar 13, 2010

i have configured ldapserver on rhel4 for creating address book

following are configuration files on ldap server
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema

i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.

but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"

also when i configured address book on mozilla on server., it is working fine.but not working on another any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.

View 3 Replies View Related

OpenSUSE :: Ldap Via Yast - Ldap-sasl-interactive_bind_s - Local Error - 2

Jul 2, 2010

I took to yast to install ldap. I creating the CA cert, server key and server cert and specified them during the yast ldap server dialogs.

The firewall is open for ldap.

I also went through yast's ldap client ... though I didn't exactly see to anything (presuably it wrote up a configuration file somewhere).

However when trying use the basic ldap tools, like ldapwhoami. Well it doesn't connect and gives me the above error. Of coure the ldap db is unpopulated as yet, so it probably is not able to say who am at all. But ldapadd doesn't work either.

It seems to point to my SSL usage not being correct .. so I'm trying to double check that now.

View 2 Replies View Related

Networking :: LDAP Configuration Error - Can't Connect To LDAP Server -1

May 31, 2010

I'm trying to set up a Linux server and I am new to this. I have gone through most of the configuration using SAMBA 3.0 and when I populate the ldap directory all I get this error before the password request:

Then when I perform an ldapsearch to see if the directory is populated I get this message:

I'm positive all my .conf files are done right.

View 3 Replies View Related

Fedora :: Can't Figure Out This Script's Error Messages?

Jun 3, 2010

I'm trying to run this script

checksum=`md5sum /usr/local/src/Wellenreiter-v1.9.tar.gz`
if [ $checksum == $MD5 ] then;


View 3 Replies View Related

Fedora :: Kernel: Imklog Continuously Generating Error Messages

Oct 4, 2010

I am using latest updated Fedora 13 (presently kernel-

kernel imklog error messages fills my hard disk again and again, /var/log/messages file becomes more than 5Gb daily.

the /var/log/messages file contains following entries:

Sep 27 10:35:09 arun kernel: imklog 4.4.2, log source = /proc/kmsg started.
Sep 27 10:35:09 arun rsyslogd: [origin software="rsyslogd" swVersion="4.4.2" x-pid="1083" x-info=""] (re)start
Sep 27 10:35:09 arun atd[19007]: File a0000b0145c567 is in wrong format - aborting


I think, I can stop kernel logging from /etc/rsyslog.conf, but I wanted to know the real problem.

View 2 Replies View Related

Fedora Hardware :: NVRM Xid Error Messages With Nvidia-96xx Driver?

Jan 9, 2009

I installed kmod-nvidia-96xx- yesterday. After rebooting, the X server started correctly, but at the welcome login screen, my screen goes black for a bit whenever anything on the display changes. After logging in, the problem remains, plus my text is somewhat garbled.There are no error messages in /var/log/Xorg.0.log. The only error messages I could find were in /var/log/messages:

kernel: NVRM: Xid (0001:00): 8, Channel 00000000
kernel: NVRM: Xid (0001:00): 13, ...
kernel: NVRM: Xid (0001:00): 3, C ...


View 1 Replies View Related

Fedora :: Compiling Open Vm Tool On 13 - Failed On Stage 2 With Error Messages ?

Feb 1, 2011

On compiling open-vm-tools-8.4.2-261024 on Fedora 13 x86_64. When I run make, it failed on stage 2 with these error messages:

I think I have to compile these modules into the kernel.

View 1 Replies View Related

Fedora :: F13 SSSD And LDAP (ldap.conf) / Appear /etc/ldap.conf Is Being Ignored?

Oct 21, 2010

I have LDAP authentication working via SSSD using authconfig-tui and a few minor modifications to sssd.conf (ie: max_id etc). The problem I am having is it would appear /etc/ldap.conf is being ignored and/or setups that work perfectly on RHEL5, F11 and F12 no longer work on F13. Specifically Im referring to "pam_check_host_attr" and "nss_map_attribute". It refuses to honor either of these options and I can only assume a number of the other options in our ldap.conf. For instance, "nss_map_attribute" is defaulting to the standard "homeDirectory" rather than "homeDirectoryLinux". This is related to a bunch of OSX clients we have and its not optional to use another setup. The host restriction is also a major issue.

Relevant sssd.conf:
auth_provider = ldap
cache_credentials = True

View 11 Replies View Related

Fedora :: Could Not Connect To Wicd's D-Bus Interface - Check The Wicd Log For Error Messages

Jul 1, 2010

I installed Wicd in my F13 but I got problems when starting it When I try to start it I got error message:

Could not connect to wicd's D-Bus interface - Check the wicd log for error messages.

View 11 Replies View Related

General :: Linpus 2.6.32 / Error Messages Saying Something Such As Cannot Run Var?

Nov 5, 2010

Just bought a brand new Acer Aspire 5745G, straight away I wanted to install Ubuntu 10.10, I stuck in the cd and rebooted the new laptop that currently only seemed to have Linpus Linux, I then got masses of error messages saying something such as cannot run var/ etc etc and then

:cannot touch 'var/lock/subsys/local': input/output error

and then...

EXT2-fs error (device sda1) : ext2_lookup: deleted inode referenced (lots of numbers here)

It does this for many, many lines then sites there for ages doing nothing and wont allow me to type any commands ( I dont know any command really apart from 'reboot') and then finally after 5 mins or so shows the command prompt [root@localhost /]# but I cant do anything from here.

I've done some searches and found this thread:


but startx and system-cofig-display dont work and just says bad commands.

Ive also tried changing the settings so it always reboots from dvd, same problem, made a USB ubuntu start up, forced booting from usb, same again.

View 4 Replies View Related

Server :: Config Ldap Client To Direct Its Authentication To Slave Ldap?

Apr 5, 2010

i have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap

here is my config file on ldap client (i am not sure if it is the right place though)

ip : is master ldap
ip : is slave ldap
pico /etc/ldap/ldap.conf
# LDAP Defaults

View 11 Replies View Related

CentOS 5 Networking :: LDAP User Can't Login Remotely By SSH On LDAP/Samba PDC?

Sep 8, 2009

I installed CentOS 5.2 and then run yum update. I configured this server as LDAP/Samba primary domain controller. LDAP seems to be OK and for testing I am able to create users with:smbldap-tools useradd -am usernameI can ssh into the server as root and also as a Linux user which was locally created in the server. But ssh into the server as LDAP user fails (from a Fedora 11 machine) with "Permission denied, please try again", prompting again for password.Some data:

# rpm -qa | grep ldap


View 1 Replies View Related

Server :: Apache Authentication: Allow LDAP Group OR User Named Guest But Not All LDAP Users?

May 25, 2011

I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.

This is the common part:


AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all

This part by itself works for the LDAP authentication:


AuthName "System Admins"
AuthLDAPURL "ldaps://," SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,

This part works by itself for guest access:


Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user

But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?

View 1 Replies View Related

Debian :: Error Messages After Upgrade To Jessie

Jun 3, 2015

/var/log/syslog is full of messages

/etc/gdm3/Xsession[3408]: ![1433316153,000,xklavier_evt_xkb.c:xkl_xkb_process_x_event/] #011ATTENTION! Currently cached group 0 is not equal to the current group from the event: 1

What this means and how to fix it?

View 4 Replies View Related

OpenSUSE :: Error Messages Flash By - How To Slow Them Down

Nov 8, 2010

I have a number of applications (Evolution, Openoffice Writer & Calc, Firefox) that are popping up an error message when I close them, but the window snaps closed before I can read the message. The applications run fine as far as I can tell. how to slow or pause the error message so I can figure out what's going on.

View 9 Replies View Related

Ubuntu :: Error Messages About Applets / Won't Appear After Startup

May 29, 2010

Can someone please help me? I'm a noob and I've never had a problem like this before.Ever since I installed on this system every time I start up I get a bunch of error windows.I tried pressing the "Don't Delete" or "Reload" buttons as appropriate. Then the applets sometimes reappear and sometimes they don't. Please help a noob!

View 2 Replies View Related

Ubuntu :: Error Messages At Boot-time?

Jul 1, 2010

I just upgraded to 10.04 through the Update Manager. During the updated however I got an error telling me that it was unable to install something. Sorry, I can't remember what it was; it didn't stop the updated so I assumed it wasn't that important. Anyways, I don't know if this is because of that error, but during the boot process and when shutting the computer I get console messages. When I boot it tells me that "mounting none on /dev failed No such device" and when I shut down I get these messages.I see this was asked before and that it isn't a big issue, but I'd still like to solve it. The problem is that I'm pretty new to Ubuntu and Linux in general I don't know how to follow the very general instructions given in that thread.

View 2 Replies View Related

Ubuntu :: 10.04 - Getting Firefox / Thunderbird Error Messages

Nov 10, 2010

Problem-cannot mount 2 other samba computers on my ubuntu 10.04 via 'sudo mountall'. Additionally I now get Firefox/Thunderbird error messages as listed below. Had no problems with ubuntu UNTIL I attempted install of VirtualBox running WinXP client in my Ubuntu host. VirtualBox seemed to install ok but upon startup of WinXP client all I got was a black screen. To close it I had to do "Power Off" which VBox manual says is like a hard power off and is to be avoided. So I guess it's like I crashed XP within Ubuntu.

Now - ubuntu boots ok except will not auto mount other samba connected computers. Manually running 'sudo mountall' in terminal gives --
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } swapon: /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18: swapon failed: Device or resource busy
mountall: swapon /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18 [2235] terminated with status 255
mountall: Problem activating swap: /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18
retrying with upper case share name
mount error(6): No such device or address
Refer to the mount.cifs( manual page (e.g. man mount.cifs)
mountall: mount /media/samba_share [2239] terminated with status 32

Additionally I now get these warning messages when Firefox and Thunderbird start. (They do start and seem to work fine.)--
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Server ping error:
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } What I've tried-

1) fstab UUID matches error UUID above and matches UUID from blkid command:
fstab =#Entry for /dev/sdc2 :
UUID=24c4c591-47ec-44f1-ac52-c0e2f5850c18 none swap sw 0 0
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; }
blkid = /dev/sdc2: UUID="24c4c591-47ec-44f1-ac52-c0e2f5850c18" TYPE="swap"

2) Reinstalled mountall from synaptic pkg manager; did not try to remove mountall and reinstall. To remove, removes LOTS of other packages from system - not brave enough to do that (yet).

3) Ran fsck on swap partition as below. Swap not found. (that confuses me.)p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } john@johndesk:~$ fsck /dev/sdc2
fsck from util-linux-ng 2.17.2
fsck: fsck.swap: not found
fsck: Error 2 while executing fsck.swap for /dev/sdc2
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } 4) deleted all the files in ~/.dbus/session-bus. Ubuntu just rebuilds the same file back.

View 3 Replies View Related

Ubuntu :: Error Messages When Attempting To Boot 9.10

Dec 29, 2010

I have Ubuntu 9.10. The batter drained several days ago, and now when I attempt to boot I simply get a string of indecipherable error messages which last for about 5 minutes, and the screen then goes completely black. I am not able to even get to the login screen. Windows 7 Starter boots fine, so it's definitely a software issue. Any solutions short of completely reinstalling? I really don't want to lose all of my data.

View 2 Replies View Related

Ubuntu :: Error Messages When Trying To Download Updates?

Mar 1, 2011

Why is it that I kept getting error messages that basically were saying that could not connect to the Ubuntu servers to do download of updates to Ubuntu that is until I switched to the MAIN ubuntu server at which point it worked fine.I tried several of the Ubuntu servers other than the MAIN server and kept getting error messages. Is there some problem with those other servers ?

View 1 Replies View Related

Ubuntu :: Several Grub Error Messages On Startup

May 1, 2011

I just installed Natty on my laptop. It has SSD drive, so to align the file system to the physical block size properly I created the partitions manually. After the installation it only boots to the GRUB recovery console, so I tried re-installing GRUB from Live CD by:

sudo mount /dev/sda1 /mnt
sudo grub-install --root-directory=/mnt /dev/sda

It now boots to the system but always shows the following error messages instead of the GRUB menu on every boot:

error: file not found.
error: file not found.
error: no suitable mode found.
error: no video mode activated.
error: file not found.
error: file not found.

I suspect that I've missed out something during the installation, since SSD drives seem to need some more attention.

View 2 Replies View Related

Ubuntu Installation :: Getting Error Messages / Resolve This?

May 12, 2011

I am trying to install ubuntu on my old laptops but dis message keep coming up on all code...

View 5 Replies View Related

General :: No More Pty - Backup Is Failed - Error Messages

Sep 15, 2009

We have a working backup script which gave no problems ever. But recently the backup is failed giving following error messages,

Statement just before the error occured was, /usr/bin/rsh remoteserver1 /tmp/backup/script.scr

1. The system has no more ptys. Ask your system administrator to create more.
2. The system only has a finite number of ptys and you have many of them in use. The usual reason for this is that you forgot (or didn't know) to call "wait" after closing each of them.

So it looks like the system is falling short of the /dev/pty ...atleast I think so. Dont know the real reason.

View 1 Replies View Related

Hardware :: DVD-RW Gives Error Messages When Mounting And During Boot?

Mar 11, 2010

i bought a new DVD-RW:url
(sorry, i couldn't find english results for it)

$ dmesg | tail
[ 246.543039] hda: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
[ 246.543047] hda: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
[ 246.543052] hda: possibly failed opcode: 0xa0

besides those error messages it seems to work.if there is an iso-cd in the drive i get similar messages during boot and need to hit ctrl+c to go on with booting.

a search gave me this: url

View 6 Replies View Related

Software :: Error Messages When Booting Into Ubuntu?

Jun 20, 2011

I'm not sure when this occurred, but it happened either when I was trying to install the new gnome-shell, or after installing kbuntu. In any event, when I try to boot Ubuntu 10.04, I get the login screen where I enter my username/password. After doing so, I get the following error messages (in this order). I should note that add the login screen, I have the option boot gnome, kde, failsafe gnome, etc. I tried all the options with the same result:

"Cannot open consolekit session: unable to open session: failed to execute to program /lib/dbus-daemon-launch-helper:success"

"Cannot enter home directory. Using /"

"Could not duplicate ICEauthority file/.Iceauthority."

View 5 Replies View Related

Ubuntu :: 'grub Loading' And No Other Error Messages

Mar 19, 2010

I have a CLEVO laptop and it currently has Windows 7 installed. I now want to create a separate partition to install Ubunutu 9.10 64bit. I attempted to install this and the install part worked fine but as soon as I rebooted all I seem to be getting after the BIOS is 'grub loading'. I get no other error messages and am stumped on what the problem is. It also meant I couldnt load windows either but I fixed this by loading the windows cd, running repair and then fixing the MBR which another thread mentioned. Once this was done windows loading up ok. I have checked nearly every setting and it has made no difference. I tried reinstalling 9.10 but came up with the same problem. I am not sure what I did in Windows may have caused it. I have a 320gb drive and I shrunk it using disk management as I know the ubuntu will see this free space and install the OS onto it. Should I have left this and let 9.10 create some space automatically during install?

View 1 Replies View Related

Ubuntu Servers :: LDAP Passwd Change Error ?

Mar 15, 2011

I recently set up a LDAP server, and have a server using it to authenticate users.

That works completely, but when a user tries to use passwd to change his password this happens.


And this is in /var/log/auth.log


View 1 Replies View Related

Server :: Getting Error When LDAP User Added Through Webmin

Apr 1, 2010

I have installed webmin. I am configuring ldap server using webmin gui. when i try to add user by ldap user and group I get following error. Failed to save user; Failed to add user to ldap database; modification required authentication. I am new in ldap configuration and hope for best reply.

View 1 Replies View Related

Server :: LDAP Login Error - Cannot Find Name For Group Id

Apr 12, 2011

I have openldap server and i am authenticating with Redhat Directory Services(RHDS).I have confgured the RHDS for the user login giving /bin/bash as the login shell and joined the client machine using system-config-authentication.The user is able to login in connand line but below it gives the error :
"cannot find name for group id <id number>"

View 1 Replies View Related

Copyrights 2005-15, All rights reserved