I have a small bash/awk program that extracts the date/time/size of thousands of email headers. I'm trying to also extract the last "Received from:" string from these email headers which will give me the senders email server. on extracting the last occurrence of this string, and printing the information after it?
I'm trying to create an application that monitors, among other things, what site the user is currently viewing. I would like to know if there is any way to get the current URL from the Firefox's address bar on a Linux machine. I know that under Windows I can use the DDE server approach, but under Linux this task is proving very tricky. I've considered an approach involving an extension to Firefox, but this would require the user to install the said extension himself. Which is not something I want. If an extension can be installed by a different program's installer than that could work, but I don't know if that's possible or not.
Is there a way of allowing only certain domain to send e-mails to certain specific e-mail address. I am using Sendmail, and I have an alias which translate to certain members of staff within my organization. I don't expect e-mails from outside our domain to be sent to this alias e-mail address.
Within Evolution, the message body is blank but there is an attachment. This attachment may itself be blank or broken in some way.
If I can alter settings as recipient so that these fractured messages don't happen, terrific. If there is some SaveAs & filter that will let me extract the content, that is good too. If there are settings that the sender might enable on their end, I could always ask, but I'd still need that filter.
I routinely get email with "attachments" . These attachments are supposed to be other messages being forwarded to me. These 2nd, 3rd, ... level messages are routinely broken somehow so that I cannot read them with Evolution or Thunderbird. I can save as mumble.eml and scan with a text editor, but then I find large block of mime-encoded content that is often some sort of image file: JPG, PNG, PDF etc.
I installed the Centos 5.5 and after the Xen. After I put a virtual machine named VM01.Initially it worked properly, I tried everything and it worked.When rebooted, I had problems with the network.I have two network cards eth0 and eth1, but eth1 does not have any ip and I use only eth0.The error that appears is:
vif0.0: received packet with own address the source address
I am working with a script that sends out a mail with an attachment by using the uuencode command along with the mail command. But my problem is when I need to run the script using an email address with a dot in the middle of the address (ie. firstname.lastname@example.org)
Is there a way to control all email address in one server manage all email application software either win OS / MAC OS or Linux Distro. I have experience about email when the pc crashed i dont have any backup for their email data also email address.
I want to pass ip address,port address and some parameters from command line using python script.The ip address and port address for establishing socket connection and remaining parameters to execute different connection.
I need a small shell based program that prints the mac address of physical ethernet adapter from it's firmware. I need this utility for license generation and appliance activation. I have tried several example but none of them is flawless, The easiest method I have found is to parse the output of "ifconfig" command but it has also some drawbacks.
1. Firstly program should differentiate between physical and virtual adapters. Physical means installed on board(wired or wireless) or installed additionally. Virtual adapters are those created by VPN or created by virtualization apps such as VirtualBox/VMWare etc. I am not interested in virtual ones.
2. In case of more them one physical adapters(wired and wireless), it should print the mac address and description(name & vendor) of both/all adapters.
3. If media is disconnected then also it should be able to read the mac address and description(name, vendor) of card.
4. This one is bit complex. I know that 'ethtool' can show you the universal mac address but it's limited to use only 2 types of drivers and won't work in all cases.
I want to share 3 email addresses and an address book among 2 users on a small network with 3 computers. Emails come from 3 different POP email accounts. There are 2 users.Each user may use any of 3 computers on the network (2 computers are linux, one is Windows XP). The 2 users have separate userids on the linux machines, but share an account on the Windows machine.
Each user should be able to view, reply to, delete, and otherwise deal with emails from any of the 3 POP sources, regardless of which computer the user is logged on to. Also, each user should be able to view and update entries in the address book, regardless of which computer the user is logged on to. What about using a system like courier or egroupware to retrieve and store the email from the 3 POP sources? Then courier or egroupware could make its mail store (maildir?) available via IMAP to the 2 users via email clients on each of the 3 computers.
The mail would be stored in the single, unique, courier or egroupware maildir store, not in the email clients. So if any user deletes a message or replies to a message, the action is visible to the other user from any computer. Also, emails only need be deleted once, not multiple times from each email client. I have looked at the courier and egroupware documentation, but I can't figure out whether either of them can be set up to retrieve email from 3 POP sources? If they can, how do you do it?
They appear to be email servers that collect emails sent to the domain they are configured to serve? could email clients be setup to share a single mailbox and address book (at least on the linux machines. forget about Windows). I guess the mailbox would lock when any client opened it, so only one client at a time could be active.
My Ubuntu One account. I had intended to change my email address, but after entering the second address, I find I cannot delete the original. I have the second one set to my primary, but I can still log in with either. I'd like to be able to permanently delete the first.
tell postfix to send email sent to one email address to another email address. What I really need to do is tell postfix that every email sent to [URL] and [URL] be sent to [URL] I tried transport maps like this: [URL] but that did not work. I then tried canonical maps like this:
I have my system set up with sendmail (going through my ISP SMTP server) but when I sent an email using sendmail it was defaulting the from address to user.host.domain or something similar. So I read up about masquerading [URL] and managed to get it to USERNAME@myisp.com however I want to change USERNAME to a different value because my ISP username is different from my machine username. My aim is just to get the from address to be [URL]. This machine is only used by me so I don't need it to be different for different users if that makes things any easier...?
this seems silly but I am changing ISPs and need to change my notification email address (for here). Under User Menu -> Edit account it shows my email but does not allow me to change my email. Since I am able to post I assume I am logged in correctly. So what did I miss?
I've come across a strange issue where any email address that I email with mail returns an error "Bad Address"
Fairly new Centos 5.4 Install, sendmail is the MTA. Linux 2.6.18-164.el5 #1 SMP Thu Sep 3 03:28:30 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux DNS is working fine so there isn't a problem. [root@hn1 /]# host -t mx iol.co.za iol.co.za mail is handled by 10 mg1.iol.co.za. iol.co.za mail is handled by 10 mg2.iol.co.za. iol.co.za mail is handled by 30 vulpix.iol.co.za.
Yet when I try to use mail it fails: [root@hn1 /]# which mail /bin/mail [root@hn1 /]# ls -lrth /bin/mail -rwxr-xr-x 1 root mail 83K Jan 7 2007 /bin/mail [root@hn1 /]# mail -s "test" email@example.com Bad address Nothing in the maillog.
I have a server (RHEL 4.7) with an mqueue that keeps growing over a two or three day interval. Then I have to manually flush the queue by removing all the mail in the spool directory as the sendmail flush command doesn't work. I've looked at the mail queue manually with a sendmail -bp command and it seems to show an occaisional mail item in the queue. On the other hand, there seems to be a lot more non-legitimate emails in the queue spool. how do I find out the source of the email in the main queue? Next, how do I stop it from building the queue? Next, is there anyway to automatically flush the queue once it builds if I need to?
When I try to access at physical address (0xD0000), we known that it is necessary to convert physical address to virtual address using function IOREMAP(0xD0000, 1024) and return me 0xC00D0000.
Now our doubt is when I have a board with I/O in address 0x150, is it necessary to convert this address to other virtual address??? or with inb(0x150) return me state of I/O in this address? How can I known where is this I/O address in my map memory?
I just discovered View > "All message headers" in the Evolution email client and am quite concerned that all my out going emails contain my personal IP Address. I know that this is standard email protocol but i'm wondering if it is possible to hide or modify this header information? Or would i be better off using a webmail client?
tried to sign up but it felt like a badly coded .asp page, wouldn't accept my email address? Same address hand typed both boxes? tried it quite a few times, very unubuntu. still explanation marks next to each email address?