OpenSUSE :: Use 'make' Command Gnome On OS11.3?

Oct 21, 2010

At the moment 'make' returns this:

Code:
./kernelversion.c:13:30: fatal error: linux/utsrelease.h: No such file or directory
compilation terminated.
Makefile.inc:81: *** Cannot detect kernel version - please check compiler and KERNELPATH. Stop.

I would do a little more homework, but I already did a lot only to get stuck here, and I need to solve this sooner rather than later.

I have already: installed devel and desktop-devel and given up about 350mb of diskspace to

Code:
zypper in -t pattern devel_C_C++

Only to still not have the make function available.
If that install was unecessary, I'm hoping there's a simple uninstall version of that line.

Reading what it's saying, it sounds like I may have all the right kit but it needs a nudge in the direction of the kernel??

View 3 Replies


ADVERTISEMENT

OpenSUSE Hardware :: Make Creative HS-1200 Wireless Headset To Work In OS11.1?

Jan 2, 2009

Is there any possibilities to make Creative HS-1200 wireless headset to work in OS11.1?

It shows up in Mixer panel, but i cant in any way configure it or make it work. It seems its been detected in some way, but i Yast-Sound it doesnt show up. Only in KMix.

View 3 Replies View Related

OpenSUSE :: Bomgar Work On OS11.3 64bits?

Jul 30, 2010

Im about to get some support from Novell using Bomgar. Bomgar support SUSE, Ubuntu, Redhat, Fedore, but i can't find anything about OpenSUSE.

Anyone know if Bomgar work on OS11.3 64bits?

View 1 Replies View Related

OpenSUSE :: OS11.2/KDE 4.4: Akonadi Control Center Missing

Feb 18, 2010

I recently upgraded my SuSE 11.2 to KDE4.4 from "download.opensuse.org/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/". Most things run fine, however the "Akonadi Control Center" does not appear in my KDE "System Settings". Akonadi itself seems to run, at least Contact uses it for the addresses.

I searched for all "akonadi" packages, but I didn't find ones which I do not have installed.

View 5 Replies View Related

OpenSUSE :: Trashed VMWare Install - Want To Reinstall (OS11.2 X64)

Jun 9, 2010

I am running OpenSuSE 11.2 64bit which was upgraded from 11.1. When I moved to OS 11.2, I found out the hard way about VMWare not working. Then tried to remove it and fix it myself.

When I try to run the config script...
Code:
parents:~ # vmware-config.pl
Unable to find the answer LIBDIR in the installer database
(/etc/vmware/locations). You may want to re-install VMware Server.
Execution aborted.
parents:~ #

When I try to install vmware-server
Code:
parents:~ # rpm -i VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed

When I try to upgrade vmware-server
Code:
parents:~ # rpm -U VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed

When I try to force install vmware-server
Code:
parents:~ # rpm --force VMware-server-2.0.2-203138.x86_64.rpm
rpm: only installation, upgrading, rmsource and rmspec may be forced

Other than rebuilding my box, how can I recover from this?

View 2 Replies View Related

OpenSUSE :: OS11.3 - Get Banshee / Rhythombox To Play M4a - Aac Or Similar?

Aug 2, 2010

Has anyone succeeded in coercing either banshee or rhythmbox to play "restricted" media? On my 11.3 install, I have all the packages from the "one-click" install that takes 49 clicks to find on the new wiki structure ... Playback works correctly in mplayer, gnome-mplayer, and smplayer. VLC works also, ... yawn ....

This is the third consecutive release [COLOR="rgb(0, 0, 0)"](AT BEST)[/COLOR] where this stuff is badly broken! By badly broken, I mean that installing all the needed software and codecs does not appear to be the only requirement. I was able to get it working in 11.1 and 11.2, but only via a hit and miss series of un-install the packages, reinstall one by one ... making offerings of fatty sheep ... reinstalling again .... performing the second part of the ring cycle for the neighbours cat ... remove the codecs again .... install again ... wow ... it's working ... set the entire system to ro ... sing for the cat again!

Does anyone have any insight as to why gstreamer is SOOOOOOO foobared in OpenSUSE? Can anyone articulate a series of steps that will actually get the desired result? BTW, getting this stuff working in FC13 is trivial. Add the fusion repo and install the codecs! I remember a better day in SuSE land when one added the packman repo and installed the codecs ...

View 1 Replies View Related

OpenSUSE Install :: Get OS11.2 To Recognize LVM Drive On Boot?

Nov 13, 2009

everytime i boot up I have to:

# vgscan
# mount -a

what is the command to get suse to automatically run vgscan at boot?

View 4 Replies View Related

OpenSUSE Install :: White Screen While Booting OS11.3?

Feb 18, 2011

I created bootable USB stick in Ubuntu the hard way in console. When I am booting and when my status bar is half full with white color I get white screen, where is the problem please?

View 9 Replies View Related

OpenSUSE Wireless :: OS11.2 Installed But WLAN (Atheros5212)?

Jan 15, 2010

After been convinced by an exchange student from Nashville I am hosting here in Germany I went into openSuse 11.2. I installed and got openSuse 11.2 to work. I must admit, that I was very impressed. It is more than 10 years that I tried a UNIX system and Linux was quite a cryptic thing. First some additional drivers had to be installed to get MP3 to play. However Internet access was possible with cable but the system failed in recognizing the WLAN.

Here is my system:
HP Compaq nc4000
OpenSuse 11.2 (i586)
KDE 4.3.1 "release 6"
Wireless Network
Atheros AR5212

I have looked through some posts but must admit, that I did not understand much of that. I Am willing to learn, however I do not see myself compiling some drivers. If you could tell me which URL could be used for dloading or installing via Yest, If more sophisticated solutions, than I will have to ask my student to do it for me, but he should learn German and learn more about German lifestile in German Bars.

View 1 Replies View Related

CentOS 5 :: Added Gnome And X To Command Line Only Install - How To Make X Start At Boot

Nov 5, 2009

I've got an install of CentOS 5.3 in a VM which was installed without X or Gnome.I've added X (yum groupinstall 'X Window System') and Gnome (yum groupinstall 'GNOME Desktop Environment) and can now run startx no problem.However on boot I get a command line login rather than the graphical login screen one normally gets if Gnome is included at install time.What do I need to do to get the graphical login after boot?

View 3 Replies View Related

OpenSUSE Install :: KDE3 Disappeared From Graphical Login Selection (OS11.0)?

Feb 21, 2010

I used KDE3 with 11.0 with some KDE4 apps till I needed some applications from the KDE4 factory tree and mistakenly left the repository active. Next time the online update also updated most of the applications I would rather keep, and as a result the KDE3 disappeared from the KDM login choices. So I have two questions:1. how to enable users to select KDE3 at login (currently I have to select failsafe mode and run startkde manually)2. how to replay back an update I didn't want to have?

Perhaps a combination of the above: can I upgrade to OS11.2 and keep KDE3? (please don't tell me to switch to KDE4, I acknowledge and appreciate the effort and the improvements that KDE4 got, but it's still not a replacement for KDE3 - there are so many simple things which are impossible in the new version)

View 9 Replies View Related

OpenSUSE Hardware :: Wireless Device Crashes OS11.2 - Encore Electronics ENLWI-G2

Dec 19, 2009

i just installed a new wireless device from encore electronics(802.11g Wireless PCI Adapter ENLWI-G2) but it deadlocks openSUSE 11.2 when i start the networking module in YaST. It also deadlocks(Freezes up) when i tried reinstalling suse. can someone help me, has anyone got this device to work? I also tried Fedora 12... it manages to see my wlan and posts the mac address of the card.. but it also locks up while trying to use it or configure it

View 9 Replies View Related

OpenSUSE Multimedia :: Make Gnome-mplayer Recognize Commands Like "{a6}" Inside Srt Files On 11.3 - GNOME 2.30.2

Jan 10, 2011

I use gnome-mplayer 1.0.0 and Totem Movie Player 2.30.2 to view videos Both read subtitles well from srt files. But both are not able to read {a6} command in the srt files.

NOTE:- {a6} command serves the purpose of putting the subtitles on top of the screen, making it possible for subbers to display lyrics/additional footnotes on top, while at the same time, having the dialogues to show in their usual position.

Is there are way to force either of them to read the special commands properly?

View 9 Replies View Related

OpenSUSE Install :: Recent Update Of Os11.3 Left System With Boot Failure / File Not Found

Nov 4, 2010

Toshiba notebook is set up to triple boot win7, mepis 8.5 and os 11.3.Recent update of os11.3 left system with boot failure, "file not found".I booted mepis and used utility to reinstall grub, but no joy.
Appeared to install ok but on reboot, sda5 identified as 'mepis' not os11.3 and would not boot. Win7 & mepis boot ok.

Next, booted live Parted Magic and repaired as per another thread here, but again, no joy.NONE of the systems will boot.Rebooted mepis live cd and reinstalled grub again. Sda5 still identified as mepis and will not boot. Win7 & mepis boot ok.

View 3 Replies View Related

OpenSUSE :: Possible To Make Gnome Desktop Look Like On KDE?

Feb 8, 2011

I want to make Gnome desktop look like on KDE, to be more precisely if its possible to make a desktop/home folder like in KDE???

I'm using OpenSUSE 11.3 32bit

View 9 Replies View Related

OpenSUSE :: Make Command Not Working

Feb 27, 2011

i found the make command not working in the gnome terminal of opensuselinux 11.3

View 3 Replies View Related

SUSE / Novell :: How To Get MAKE Command - OpenSUSE 10.3

Jun 14, 2010

I am using openSUSE 10.3 and the pc is DELL Optiplex 780. The network devices is not supported by openSUSE 10.3 but I may have found it's module. But I can't "MAKE INSTALL" it as my installation does not have MAKE command.

I have selected "Install All" during my installation. Linux version is 2.6.22.5-31-default.

What is the package name for the MAKE command? So that I can find it so that I can install it into my openSUSE 10.3?

View 3 Replies View Related

OpenSUSE :: Command Line Applet Does Not Work In 11.4 (gnome)

May 19, 2011

I add a "command line" or "mini-commander" applet to the panel in gnome, but nothing happens.

If I launch "/usr/lib/mini_commander_applet" on a terminal, I get a dozen such applets, for all the times I tried, but then I have an xterm tied up.

If I launch the same from "alt-f2" it does not work, and gives no error.

Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar)

View 9 Replies View Related

OpenSUSE Install :: Unable To Install OS11.2?

Mar 1, 2010

I downloaded the latest stable release from the opensuse download site and when I try to install it, it fails. Basically, the installation reaches 50% and then I get a message : Failed copying image file to hard disk. The hard disk on my PC is 18GB and the installer suggests 10.7 GB for /home and 7.2 GB for /root. I read somewhere that /root needs to be allocated a min of 10 GB, but the installer does not let me change the size /root to more that 7.2 GB. how can I go about installing it?

View 9 Replies View Related

OpenSUSE :: Invoking The Gnome Start Menu From The Command Line?

Jun 28, 2010

I'm wanting to be able to run the Open Suse start menu from the command line.king remotely, I have found that I have faster response time by only running specific X components instead of an entire desktop (particularly useful under Windows 7 Cygwin). Specifically, I'd like to invoke the start menu from a ssh command line.On Linux Mint,line command is:mintmenuWhat is the equivalent command to bring up the Slab Start Menu on Open Suse?

View 8 Replies View Related

OpenSUSE Install :: Any Substancial Difference Between Gnome Terminal Or Hitting 'c' To Bring Up Command Line

Feb 25, 2010

so the safest way to go about this is to assume I know nothing. I mean, I have a rough Idea of what a kernel is, no idea what a shell is, etc. I do consider myself computer savvy, but know NOTHING about linux and thats why I'm Diving in, hopefully not too much, this is just to give you an idea of what we're working with here.

After several install attempts I kept getting a blank screen. Whether it be black,white, or the default gnome desktop (without any icons, and simple things like ctrl+alt+backspace just doesn't work, or anything else for that matter) I was ending up with a blank screen. Driver for moniter....maybe....but I did succesfully install it once, and it worked like a charm...shutdown properly, and the next day after work...Boom, same thing after startup.today I started from scratch and re-installed....samething, until I hit the power button, went from the dvd(iso) and did a fail safe, now my resolution is much better than it was the first time..Actual questions.....what did I do to fix it when failsafe never worked before?

Is there a way to save these settings, so I don't run into the problem again, because I don't even want to turn of my computer at this point?If i'm trying to dive in and learn the command line actions, is there any substancial difference between gnome terminal or hitting "c" to bring up the command line?

View 9 Replies View Related

Ubuntu :: Cannot Make And Make Install In Gnome Shell?

Jun 20, 2011

I just installed Gnome Shell in Ubuntu 11.04 through UGR Linux and everything works fine! The only problem is that I cannot run make and make install. I get the following errors:

Code:
alexandros@Autobot:~/gnome-shell/source/gnome-shell-extensions$ make && make install
Making all in extensions
make[1]: Entering directory `/home/alexandros/gnome-shell/source/gnome-shell-extensions/extensions'[code]........

View 3 Replies View Related

OpenSUSE Wireless :: GNOME 3 Broke AR9285 Wireless Network Adapter - Could Not Make A Connection

Apr 23, 2011

I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?

View 2 Replies View Related

Ubuntu :: Is Command Line Invocation Of Gnome-terminal To Run More Than One Command

Feb 17, 2010

how to pass something more than a one-command startup for gnome-terminal. I will give an example of what I'm trying to do here:

Code:

#! /bin/bash
#
#TODO write this for gnome and xterm

[code]....

This same error occurs if the gnome-terminal line is changed to

Code:

gnome-terminal -e mcTerm

Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.

View 1 Replies View Related

Programming :: Command Line Invocation Of Gnome-terminal To Run More Than One Command?

Feb 16, 2010

I am trying to learn how to pass more than a one-command startup for gnome-terminal.

I will give an example of what I'm trying to do here:

Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
USAGE="
${0##*/} [-x] [-g]
code....

However, running with the -g option to invoke gnome-terminal, I get a "There was an error creating the child process for this terminal" error.

This same error occurs if the gnome-terminal line is changed to

Code:
gnome-terminal -e mcTerm

Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.

View 4 Replies View Related

OpenSUSE Install :: Make Command Not Found Can't Figure Out How To Install It

Apr 20, 2010

*edit Nevermind I think I found it on YAST * I have been having trouble finding the "make command":If 'make' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf makeI need to install 'make', 'g++', and all other building tools for suse.

View 2 Replies View Related

OpenSUSE :: Application "run As" Command In Gnome ?

Dec 15, 2010

I've just made the switch from KDE to GNOME and I'm still working on making the transition and there is one thing that I can't find.

In KDE, I had the ability to right-click on a desktop icon and go to the "run as" property and tell it to run this app as someone else (i.e. root). This was very useful for things like file manager if I wanted to crank it up in supervisor mode. I would like to find the same ability in GNOME but can't seem to locate it.

In a similar vein, I've set up my repositories and I've tried to do auto-update but when I run it, it keeps stating I don't have the authorization. I guess I need to run it as root but I can't find a place on the icon to specify this setting.

View 9 Replies View Related

General :: Using One Command "make UImage" Getting Error 127 Command Not Found?

Feb 23, 2010

I am doing some embeded linux work in ARM 9263.So I need to make a image for that board.But when I using one command "make uImage" I am getting the following error.

make: arm-linux-gcc: Command not found
CHK include/linux/version.h
make[1]: `include/asm-arm/mach-types.h' is up to date.
CHK include/linux/utsrelease.h
HOSTCC scripts/basic/fixdep
code....

View 4 Replies View Related

Fedora :: How To Make Alt-Tab Useful In Gnome 3

May 25, 2011

how to make Alt-Tab useful in Gnome 3?Also I would like to switch between workspaces horizontally. It does not make sense to lock it at one option. Plus switching horizontally is much quicker since no finger movement is involved.

View 8 Replies View Related

OpenSUSE Hardware :: Upgraded To Gnome 3.0.1 But It Started In Gnome 3 Fallback Mode

May 17, 2011

just upgraded to gnome 3.0.1 but it started in fallback mode ...! and i really don't know where to go next Here is my kernel version

Code: OpenSuSe 11.4 Linux linux-6rb4.site 2.6.37.6-0.5-default #1 SMP 2011-04-25 21:48:33 +0200 i686 i686 i386 GNU/Linux Here is hardware
System : LapTop HP G62
Processor : Intel® Coreâ„¢ i3 CPU M 350 @ 2.27GHz Ă— 4
Graphic : Intel® Ironlake Mobile GEM 20100330 DEVELOPMENT x86/MMX/SSE2

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved