OpenSUSE :: Edit Resources In KPlato?

Feb 14, 2010

I was thinking of converting openproj to kplato, but I can't edit the resource I've added. Even when adding the resource all I could do was add the name and work type.

I didn't find anything in a google search, or at koffice.org/kplato, or in the deskop help.

How do I edit the initials, email, available... all the other resource fields?

View 1 Replies


ADVERTISEMENT

OpenSUSE :: How Are So Many Resources Used On My Box

Nov 2, 2010

I have a OpenSuSE 11.1 box that is running mysql and apache. My database is only about a megabyte in size and I only have a few users per day on my site. How is it that with 8GB of RAM over 5GB is being used?

View 5 Replies View Related

OpenSUSE :: Kmix Uses 100% Of Processor Resources?

May 16, 2011

I have a problem with kmix, which uses 100% of my processor without stopping. And this is providing to rise of temperature above 80 degrees Celsius. The problem became actual after one of updates of 11.4 series.

View 9 Replies View Related

OpenSUSE Network :: Network / DNS - Can't Access Any Internet Resources Or Router

Jul 30, 2010

I'm having a strange problem with my network connection/DNS. I turn computer the on and it recognizes and connects to wireless or wired but I can't access any Internet resources or my router. If I ping the default gateway, I get no response and I get DNS errors from any network services that run at start up. If I stop and start the network daemon then it all works fine until the next time I turn on my laptop. It does this for both wireless and wired connection.

I've tried to edit the network interface information in YaST but it says that configuration is handled by knetworkmanager and I have no idea where that information is accessed. I should point out that it all worked fine until I tried to connect to open WAP at my school and couldn't so I connected to the wired network. Next morning I had this problem when connecting to my home network. My questions are 1. What could be the cause of this error and 2. where does one configure the network interfaces when using knetworkmanager

View 4 Replies View Related

OpenSUSE :: Where Are -edit-preferences In FF 3.6?

Dec 6, 2010

I just upgraded from SuSE 11.1 to 11.3.On my 11.1 system I had Firefox 3.6 installed and worked fine.Now on the 11.3 system I have of course Firefox 3.6.I only cannot access my edit- preferences. The whole -edit- menu is empty.I de-installed thru Yast2 the Firefox application, restarted the computer and installed thru Yast2 again the FF application. Unfortunately the -edit- menu is still empty.

View 9 Replies View Related

OpenSUSE :: 11.3 - How To Edit Screensaver Properties

Aug 4, 2010

I'm using Gnome on openSUSE 11.3. I wonder. How do you edit screensaver properties? For example get phosphor to display a stream of news? You could specify in Fedora and Ubuntu.

View 3 Replies View Related

OpenSUSE :: Possible To View And Edit Db3 Files ?

Aug 7, 2010

Is it possible to view and edit db3 files in linux? OpenOffice does not do it and dbview says it can't read version 83. Just wondering. I am not really firm with databases, but i remember that i did view databases in linux.

View 3 Replies View Related

OpenSUSE :: How To Open/edit PDF Files

Jun 11, 2011

I have some pdf files on a usb stick which I want to edit, Evince cannot do this, and if I try to open in Libre there is no option to import pdf there either. Is there an app. or plugin for libre to allow this

View 9 Replies View Related

OpenSUSE :: 11.4 Will Not Let Edit 50-blacklist.conf ?

Jun 17, 2011

I need to add the following line in /etc/modprobe.d/50-blacklist.conf ..

Code:

In order to get wlan working, but I cannot seem to edit the file .

I tried:

Code:

Code:

I also tried manually opening the file but it is read-only . (I did not set my root folder to read-only, however .)

I even wrote a script in /home/exo/.gnome2/nautilus-scripts that should let me open files as root, but nothing works ..

This is my script:

Code:

View 2 Replies View Related

OpenSUSE :: How To Edit Recent Address In Kmail

Feb 9, 2010

If I manually add an email address, it will appear in the recent address's list. How can I edit this list so that I can add them to my contacts.
KDE 4.3.5, KMail 1.12.4

View 1 Replies View Related

OpenSUSE :: Utility To Edit Files Without X11 Fired Up?

Jul 23, 2010

I want to edit files while in runlevel three. I am trying to learn how to navigate my entire system via CL. Whenever I use gedit in runlevel three, is says, "cannot open display"

Is there a utility to edit files without X11 fired up?

View 5 Replies View Related

OpenSUSE :: Banshee - Edit The Track Information?

Sep 14, 2010

I'm using the default media player 'Banshee', and when I select multiple tracks to edit bulk information, ie Album Name or Genre, it's only changing the track I right click on, regardless of multiple being selected.Is this the default action for Banshee, and if so, is there a way to change multiple track information at once.

View 2 Replies View Related

OpenSUSE :: Edit/create HTML Document And Run?

Feb 21, 2011

How can I edit/create HTML document and run them in linux?

View 7 Replies View Related

OpenSUSE :: Add / Edit A Desktop Icon On Kde4.6?

Apr 16, 2011

How do I add/edit a desktop icon on kde4.6? I earlier versions, we could click on the gear wheel to change or add an icon. I have a few apps that do not show an icon (even though the icon is in kickoff menu - one is pingus)

View 9 Replies View Related

OpenSUSE Multimedia :: Amarok Won't Edit Tags?

Aug 13, 2010

Amarok won't edit tags in MP3-files. All the options are greyed out. I'm using OpenSuse 11.3 64-bit with KDE 4.4.4, and Amarok v. 2.3.0.

View 2 Replies View Related

Slackware :: Some Resources On Using TOR?

Mar 4, 2010

there slackers, Can you give me some resources on using TOR? [URL]... I have used TOR and privoxy using a tutorial online, however, if you have some good links, I will study them.

View 2 Replies View Related

OpenSUSE :: OpenLDAP User - Edit Details And/or Password?

Feb 17, 2010

I have an OpenSuSe 11.0 running openldap (managed by yast) for user authentication on some services.Is there an easy way that I can provide for users to change their own passwords (Preferably a web interface)?

View 1 Replies View Related

OpenSUSE Install :: Unable To Edit Partitions During Setup (11.2 X64)?

Jan 21, 2010

I can't edit the partitions in the install setup. When I go tyo the Expert Partitioner, I see a hard disk (sda) with no partitions or user devices, and 2 RAID devices:* /dev/md126 with 465.76 GB, not encrypted, type RAID1 (no info for chunk size, parity or file system)* /dev/md127 with 2.2 MB, not encrypted, RAID_UNKNOWN (no info for chunk size, parity or file system)I didn't try to do anything in the RAID part because I wanted to preserve Win 7, but I dared to add a partition in the "hard disk" (sda) and I get an error: "the disk is in use and cannot be modified".

The behavior of Ubuntu 9.1 x64 installation is much alike.I have googled with every keyword combination I remembered, but I can't find anything that gives me a clue to what may be happening.I have already tried the 3 SATA configurations (the IDE that works with the installed Win 7, AHCI and RAID), but the result is always the same. Now the strangest thing is that fdisk and parted correctly identify the partitions. As far as I remember, parted isn't able to do modifications and fdisk says that the boundaries of the first, tiny partition, doesn't match the number of cylinders (or something like it). However, I was able create a partition with fdisk on the empty space and format it, delete it again and repeat the process a couple of times with no errors. The partituions are signed as msdos.

GParted from Ubuntu also shows the partitions, but I didn't try to do any modifications, namely because I don't think that it can solve my problem and I don't want to risk installing windows again.The hardware is brand new, a Asus M4A785Td-V Evo with an Amd Phenom II X4 965 and a WDC-WD5000ACCS-0 500 Gb HD. My lazyness made me asking the guys from whom I bought it to install Win7 Ultimate 64 in a NTFS partition, leaving half the disk untouched.y assure me that it is a "plain vanilla" ("next, next, next") installation . I guess I could try to see if I could do the partition setup in the "RAID" part of the Expert partitioner, but I have strong doubts that it solves the problem and it would be quite boring to conclude that I ruined the windows installation for nothing.

View 7 Replies View Related

OpenSUSE Install :: Can't Edit Back Device.map File

Dec 23, 2010

I've got myself in a bit of a pickle.I've got 1 hard disk drive and was trying to load a second external drive.I tried to mount the 2nd (external) drive by editing /boot/ grub/ device.map but I must have made an error, because now it boots directly into sda1 openSUSE 11.1 and when I try to look at SDA2/SDA3 it say's Invalid System Type. Presumably because they're formatted with Ext4. So I can't edit back my device.map file.What I want to do is boot into SDA3 OpenSUSE 11.3. Would anybody know why it's only booting to SDA1 and/or have any suggestions to get me back booting to SDA3? This may be a 2 step process, because I may have to boot to SDA2 first so I can edit back my /boot/grub/device.map on SDA3 before finally booting to SDA3.

View 6 Replies View Related

OpenSUSE Install :: Can Edit To Customize Runlevel 3 Console?

Aug 10, 2011

I'm relatively new to Linux and to openSUSE. I've been using 11.3 as the OS on my home server for awhile using a GUI (Gnome). I recently created a new server which is much more powerful and would like to get serious about learning the ins and outs of the system. I've learned some basic bash and would like to install 11.4 on the new server. I have two questions about this. The first is: does it add any system overhead if I install KDE but set the default runlevel to 3? I know that running the GUI takes up system resources, but I'm new enough to the system that I'm not 100% comfortable yet not having a GUI backup. On the other hand, if having a GUI installed eats up resources (other than the HDD space for installing it) even if I'm only using the system in runlevel 3, then I think I'll forgo KDE and install it as text only and just bone up on bash.

My second question is: is there a file I can edit to customize the runlevel 3 console? I just installed 11.4 on my HP Mini using KDE but defaulting to runlevel 3, and I really like the background picture and little SUSE lizard at the top of my console. Is there a way to change the background picture and logo at the top? It's probably a little juvenile on my part to want to customize this but Linux is all about choice right?

View 4 Replies View Related

OpenSUSE :: Converting Or A Program That Can Edit Microsoft Publisher Files?

Mar 24, 2010

I was able to convert a Real Estate Firm from using Microsoft OSS to OpenSuse 11.2.The Real estate agents in the firm are pleased and some are not but it's the cost of doing business and saving money.I am at a cross road or should I say I have come to a bump in the road. Most of the agents create their flyers and signs in Microsoft Publisher, I tried Open Office 3.X and I'm unable to open or edit the files in question.Do have any suggestions or could you point me in the direction of a solid solution that will help me either convert the files or a program that can be used with-in OpenSuse 11.2 that can edit the files

View 9 Replies View Related

OpenSUSE :: CinePaint Crashes - Load A Jpg For Edit Or Try To Create A New Picture

Aug 19, 2011

I am running 11_4, KDE4.7 I loaded CinePaint cinepaint-0.25-3.10.x86_64.rpm from the multimedia:color_management/openSUSE_11.4 repo. It opens, but crashes if I try to load a jpg for edit or try to create a new picture.

View 8 Replies View Related

OpenSUSE Install :: Edit Open With - Change To Default Programs

Nov 4, 2010

Where is the location of file which holds information about open with dialog? I need to edit it to change default programs that open certain files?

View 3 Replies View Related

OpenSUSE Multimedia :: Record/edit/save Music From The Microphone?

Jan 8, 2009

I would want to record/edit/save music from the microphone (convert a tape to CD). But. I start audacity, leave everything at default, record the music, and play back. It plays agonisingly slow. I can change the sample rate manually such that it sounds good, but this is just a guess (I could for example measure the recording time, and adjust the sample rate after that, such that the displayed time on the timeline fits this time). Why the hell do I need to do this? Why is the recording sample rate = playbe sample rate not producing correct output?

View 3 Replies View Related

OpenSUSE Network :: Manual Edit Of NetworkManager Conf Files ?

Sep 2, 2010

I cannot seem to find where the conf files for NetworkManager are stored in suse 11.3. I want to manually edit my IP address without using the gui.

View 5 Replies View Related

OpenSUSE Wireless :: Network Manager Crash During Edit Connections?

Mar 24, 2010

Every single time I enter the network manager to edit connections is crashes on exit. I am running opensuse on an Asus eee PC 1000HE with an Atheros network card. The crash report follows :

Distribution: openSUSE 11.2 (i586)
Gnome Release: 2.28.2 (null) (SUSE)
BugBuddy Version: 2.28.0
System: Linux 2.6.31.12-0.2-default #1 SMP 2010-03-16 21:25:39 +0100 i686

[code]....

As an extra point. I wish I could disconnect individual networks instead of just disabling networking to disconnect. I think the newer version of the network manager does this.

View 3 Replies View Related

Fedora Networking :: Useful DNS Resources?

Apr 27, 2010

Does anyone know of any decent web guides that will help me set up a DNS service running on 127.0.0.1 that will automatically forward requests like [url] to httpd running on 127.0.0.1 yet forwards requests to [url]to a 'proper' DNS service?

View 5 Replies View Related

General :: Comparing Resources Using Top?

Apr 6, 2011

Fedora 15 Alpha

3861 user 20 0 904m 128m 33m S 0.7 6.4 1:11.52 xulrunner-bin
1323 user 20 0 1555m 95m 31m S 13.5 4.8 4:06.87 gnome-shell
3494 user 20 0 1028m 50m 21m S 12.8 2.5 1:43.32 evolution

I just wondering what is the difference between RES, SHR, and VIRT.

1) The VIRT always seems to be higher. Is this using the paging file system. (virtual memory on the harddisk, the swap memory)

2) Is the RES memory the actual physical RAM memory?

3) Is shared memory sharing memory with other processes?

4) Just a final question. As I am running on a HP Mini 210, memory and CPU is a resource I don't have a abundence of. So if was to compare for example 2 difference browsers i.e. firefox and midora. What should I brench mark between to 2 to find what one uses less resources?

View 2 Replies View Related

Ubuntu :: Using Resources Of Other Pc Across Network

Dec 20, 2010

I got a fairly powerful media system standing in the living room. Most of the time it is idle, maybe playing some music. At the same time I got a pc in my office that is less resourceful. Sometimes I'll run programs through ssh with the -XC command. This way a program will seemingly run on my office pc, while it is actually running on the media system. However:

- 1 Sound doesn't transfer to the office pc.

- 2 When using a program I need to constantly be aware where I save my files. Sometimes it is located on the remote computer, sometimes it isn't.

Is there an alternative way to use the resources on the media system? E.g. run a program that is stored on the office pc and process it on the media system?

Both systems run Ubuntu (office 10.04 - media system 10.10).

View 1 Replies View Related

Ubuntu :: Stardict Using All (cpu) Resources?

Dec 31, 2010

I just recently upgraded to 10.04 (LTS), and I have been using stardict app for a long time with nothing but success on each of my laptops anc omputers I have had over the past 5 or so years. However, now on one laptop after starting the stardict app, using panel the applet I create on my xfce4-panel (as per normal), and looking up a word (highlight and press shift key which i use for quick word search using stardict), the app begins using 100% cpu resources and I am forced to kill the process.

The problem is intermittent, meaning it only occurs half of the time I am using startdict, while the other half of the time it operates normally. I have been trying to see if there is some sort of pattern, perhaps other apps running at the time the problem occurs, but I have not noticed anything that looks suspect, since I generally fire up stardict after boot in and have had it happen (the problem) without even any other apps open (just testing to try and find some sort of pattern to locate the potential issue).

I use a standard set of dictionary files for each of my comps, and currently have stardict operating fine on 2 other laptops, both running 10.04, with the same set-up (xubu, same apps, and settings pretty much) and no indications of this problem on either (other) laptop.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved