OpenSUSE Wireless :: Network - Repeatedly Fails To Make A Connection

Sep 26, 2010

Having just installed OpenSuse 11.3, NetworkManager identifies my wireless network, but repeatedly fails to make a connection. Without further ado, here are the outputs to commands requested in the first sticky thread:

[Code]....

View 7 Replies


ADVERTISEMENT

OpenSUSE Wireless :: Strange WiFi Behavior Breaks Connection Repeatedly

May 30, 2011

I have recently upgraded to 11.4 and also had to renew an AP (HP ProCurve 10ag). This was several years old but replaced an identical model which had been working well until recently. I thought it would be appropriate to flash newer firmware as the device four releases behind the times. The access point serves partner's XP laptop and my openSUSE 11.4 laptop and after flashing the firmware both machines would make a connection and then break and remake, to the extent that the openSUSE machine became unusable. I thought it was an encryption problem and spent hours changing the AP and Client setups to no avail

After reading a thread here I checked out dmesg and this is what I found:-
[78.639247] wlan0: authenticate with 00:1d:b3:4b:ae:14 (try 1)
[78.640804] wlan0: authenticated
[78.642507] wlan0: associate with 00:1d:b3:4b:ae:14 (try 1)
[78.651195] wlan0: RX AssocResp from 00:1d:b3:4b:ae:14 (capab=0x411 status=0 aid=1)
[78.651200] wlan0: associated
[78.652222] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[78.652283] cfg80211: Calling CRDA for country: DE
[78.674378] cfg80211: Regulatory domain changed to country: DE .....
This went on and on.

View 7 Replies View Related

OpenSUSE Wireless :: GNOME 3 Broke AR9285 Wireless Network Adapter - Could Not Make A Connection

Apr 23, 2011

I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?

View 2 Replies View Related

OpenSUSE Wireless :: BCM4311 Unable To Make Connection - But Can See Network?

Apr 23, 2011

I think I've read every post here about the Broadcom and connection.I thought I tried everything.Turns out (read Chapter�35.�Using NetworkManager) using Connection Manager (K Network Manager) you can not use, what I wanted to use, 'all users, use connection' or said another way, the wifi would be activated and connected Before the user 'logs in'. Well, as I said, it turns out that if you are using gnome, this will work with NetMgr, but NOT in KDE. If you want to use 'system connect' then you have to use 'traditional' if in YaST2. Oh well, at least 'i'm' connected.... (i'm the only user, so not a big deal right now, but would like to get it working...)

View 2 Replies View Related

Ubuntu Networking :: Wired Network Connection Lowers Link Speed Repeatedly

Apr 1, 2011

I believe I'm running Kubuntu 10.04, but don't quote me on that. Here's the version string from dmesg. Linux version 2.6.32-31-generic (buildd@crested) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #60-Ubuntu SMP Thu Mar 17 22:15:39 UTC 2011 (Ubuntu 2.6.32-31.60-generic 2.6.32.32+drm33.14 I have an emergent problem with my wired ethernet resetting the connection on a frequent basis. When it resets it re-negotiates the link speed and I often end up with a 10Mb/s link and on some occasions a 100Mb/s. The configured speed for the link is 1000Mb/s full duplex using a preup ethtool command. I do not use NetworkManager but have the interface configured in /etc/network/interfaces.

[code]....

View 3 Replies View Related

OpenSUSE Network :: Network Connection Fails To Go Past Router

May 16, 2011

So up until I updated from Opensuse 11.3 to 11.4, I hadn't any issues with my network connection. At least none worth mentioning. Once I installed 11.4, I've had weird issues with varying lengths of connection. Sometimes I can't connect anywhere, sometimes I can only get to the router, sometimes I'm 100%. I'd fiddle with YAST until everything worked. I honestly have no clue whether or not anything I did had any effect.

Enough of the iffy history, here's what's happening now. For the past few weeks up until last night, I have been at 100% connectivity. I never turned off my computer until last night (it just shut itself off, like the cord was unplugged. I dunno what happened, maybe it was my foot, maybe the PSU. I think it has happened before.). When I turned it back on, I was only able to connect as far as my router (192.168.1.1, a D-Link Gaming router that has always been very good to me). I could not make it to my modem (192.168.0.1, a Quest DSL modem. Once I can get here, then usually I'm good to go 100%).

I tried again this afternoon, and no change. I then get the crazy idea to unplug the ethernet cable from it's PCI-card home and return it to the onboard port (which I long ago declared defunct). Immediately after plugging it into that port, I ran "ping 192.168.0.1" and I started getting returns. I open up Firefox and try to load an external page, and nothing happens. I go back to the console that I was pinging from, and it had stopped. I start pinging my router, and no luck. What I conclude from my little experiment is that the router is not at fault.

1. It did not change at all between being at 100% and being at 0% after reboot.
2. I was able to get returns from the modem, past the router, for a brief period of time while using the defunct ethernet port.

Since I never had these problems before updating to 11.4, I'm inclined to believe that it was the update that started these problems.

View 9 Replies View Related

OpenSUSE Network :: Can Make A Connection To Vpn Server, Connection Starts, But Nothing Happens?

Feb 2, 2010

I can make a connection to the vpn server, the connection starts, but nothing happens! My IP address remains the same as previous! There is nothing added to my Knetworkmanager, I'm a beginner I should use a pcf file for my vpn connection. I use it properly, I'm sure because the connection starts and an icon is added to my panel and remains until I disconnect.

I checked it via ifconfig -a, the last part (which is for vpn) is:

Code:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:141.213.169.76 P-t-P:141.213.169.76 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1390 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0

View 2 Replies View Related

OpenSUSE Wireless :: Make Fails For New Realtek Drivers (D-Link DWA-131)

May 6, 2010

I am trying desperately to get my wireless n adapter to work. I had it running sporadically with ndiswrapper for some months now (it was always unreliable). Now I was very optimistic, when I found new driver sources from Realtek directly: Realtek I understand the DWA-131 is based on the Realtek 8192su chipset. Unfortunately the build fails:

[Code]...

View 4 Replies View Related

OpenSUSE Network :: Mobile Broadband Connection Fails

May 22, 2011

I have a Huawei E173u-2 mobile broadband usb stick. It is recognised as a gsm-modem and shows up as such in the networkManager-plasmoid. I have set up the connection details for my ISP (O2), but I can't connect. When I click on the connection, "signal strength" is shown as well as "operator" (o2 - de). The "connection state" changes to "Preparing to connect", then "Setting network address". Then the modem vanishes and comes up again a few seconds later.

Here is the log (/var/log/messages):

Code:

It seems like there is a connection for about 5 seconds, then the modem hangs up and restarts .

The stick works fine with our windows netbook, so I don't think it is a hardware failure.

How do I get this working?

My system:
opensuse 11.4
kernel 2.6.39-30-desktop (2.6.38 gives the same error)
kde 4.6.3
plasmoid-networkmanagement 0.9.svn1192577-168.6

View 2 Replies View Related

OpenSUSE Wireless :: Wifi Connection Fails After The Recent Update?

Jul 8, 2010

Recently I updated my openSUSE 11.2 and I'm not too sure what all were the recent updates but I suspect networkmanager also got updated. After I restarted my machine, my laptop fails to connect to the wireless access point. I tried both in gnome as well as KDE but the same error. This is the log I found in my /var/log/NetworkManager which I believe should give some pointers.

Code:
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> Activation (wlan0) starting connection 'Buckeye Plaza'
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...

[Code]....

I did a search of this error in google and all I got were few results which complained about bugs in some debian distro.

My wireless card works fine and so does the access point I try to connect to since my Ubuntu installation is able to connect fine as well as my windows Xp.

View 5 Replies View Related

OpenSUSE Network :: Set Up Pptp - Can't Seem To Make A Connection

Apr 6, 2011

I am using OpenSuse 11.4 and trying to set up pptp. I think I am almost there but cant seem to make a connection. Here is the log: -

[Code]....

View 1 Replies View Related

OpenSUSE Wireless :: HOSTAPD's - Why Client Repeatedly Sending The (1/4) Message And Then Timing Out?

Jan 6, 2010

I am seeing log messages that I don't understand. If I run tail -f /var/log/messages, some times I will see this this sort of repeating pattern. I don't know if I have cut at the start of the sequence or not. Incidentally, this is a normaly well-behaved client/host.

[Code].....

Why is the client repeatedly sending the (1/4) message and then timing out?

View 1 Replies View Related

OpenSUSE Wireless :: Yast Fails To Save Network Configurations?

Mar 22, 2011

I've spent two days trying to get this to work to no avail.here is the output of a recommended diagnosis script to start.[URL]

short version is ...
!!! CND0120E: Network card ra0 has no IP address
!!! CND0490E: No access point with your SSID detected on interface ra0

[code]....

View 3 Replies View Related

OpenSUSE Network :: Make A Adsl Connection,but One Package Required?

Mar 25, 2011

I downloaded openSUSE-11.4-KDE-LiveCD-i686.iso from software.opensuse.org: Download openSUSE 11.4 yesterday.It's a liveCD,not a DVD. Then I used a dd command to make a live USB by the instruction from this page:SDB:Live USB Then I shut down the computer,and boot from the usb. I went to the yast--DSL to make a new adsl connection.But after I configured everything,yast told me one package needed.The package's name is "linux-atm-lib". I haven't connected to internet.How could I do to install a package and make a connection?

Now I am downloading a DVD.Does a DVD include the package called "linux-atm-lib"?

View 2 Replies View Related

OpenSUSE Wireless :: BCM4303 Firmware Installed - Can't Make A Connection OR Scan For Networks

Aug 17, 2011

HTML Code: first I'll provide the requested information (from the sticky)

64-bit openSuSE 11.4
uname -a output
Linux linux-mx43 2.6.37.6-0.7-desktop #1 SMP PREEMPT 2011-07-21 02:17:24 +0200 x86_64 x86_64 x86_64 GNU/Linux
dmesg | grep firmware
[ 127.965048] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
lspci output:

[Code]...

I've configured the device for my network's settings in YaST's Network Settings tool. Is the card turned off by the kill switch? Where do I find the kill switch?

View 7 Replies View Related

OpenSUSE Network :: Setting Up Ad Hoc Wireless Connection?

Dec 20, 2010

im having a problem setting ad hoc wireless network between two opensuse boxes, using network manager, every time im about to smash the box, maybe im doing something wrong in the steps or something idk

how to set up ad hoc connectionl

note: im a linux rookie

View 3 Replies View Related

OpenSUSE Network :: 11.3 - WEP Key Entered But No Wireless Connection

Mar 9, 2011

I have installed opensuse 11.3. I am unable to connect to my wireless connection. KNetworkManager finds the connection (when I scan for connections), I can enter the WEP Hex key, it says it is configured. Goes through its "check list" when you click "ok", and all seems good. But it won't connect. When I run "nm-tool" I get:
State: unknown
WARNING **: error: could not connect to NetworkManager
Just ridiculous, brand new, up to date OS, and its this difficult to connect to a wireless router!

View 1 Replies View Related

OpenSUSE Network :: Working Wireless Connection But No Internet / What To Do?

Jan 15, 2010

I've installed opensuse 11.2 on an old IBM thinkpad. The install went without a hitch and when I got to the desktop I inserted my Dlink DWL-G132 wireless USB adapter. Opensuse immediately recognised that a wireless device was attached and I could see my wireless network listed. I entered my WPA password and was able to connect to my routers configuration page by entering 192.168.0.1 in the URL bar of firefox. For some reason I am unable to navigate to any webpage. When I enter a URL firefox acts as though there is no internet connection. The only way I can get the internet on my laptop is to connect it to my router with a cable. I used a wired connection and ran the update utility thinking that perhaps an update would fix the issue but it did not. I know the adapter works because the laptop used to have windows xp installed and I could connect fine with that.

Does anyone here have any idea why I would be able to connect wirelessly to the routers configuration page but not to the internet? I appreciate any advice anyone may have.

View 9 Replies View Related

OpenSUSE Network :: Wireless Connection Must Be Reconfigured After Hibernation

Mar 6, 2010

I have been running SUSE 11.1 on my HP laptop for over a year. For the most part, I am thrilled with it. However, when I awaken the computer from hibernation mode, I have to go into the Network Settings applet proceed with the wizard in order to get my wireless connection working.

Another irritating aspect is that if I go to a place with a Wireless Hotspot, the computer doesn't automatically pick it up. Again, I have to go through the Network Settings applet to get it working.

I want this to work as it does on Windows XP/Vista where I can put the computer to sleep and when I awaken it, then the wireless connection is automatically there for me, etc.

I have to think I probably need to tweak a setting somewhere, so if someone can tell me where to do this, great!

I am using an internal wireless card (Atheros AR928X PCI-EXPRESS). If you need additional info, let me know.

View 3 Replies View Related

OpenSUSE Network :: Wireless Connection Can't Access Websites

Mar 7, 2010

I just installed Opensuse 11.2 dual-booting with Windows 7 on a laptop. I have the wireless set up and connected, but I can't seem to be able to connect to any websites or ping Google, etc.I'm kind of a Linux newbie, so I'd like to get some advise as to what I can check to get it working? (Windows 7 on the same machine is able to connect - I'm using it now)

- I've tried both automatic DHCP configuration and also setting the ip/dns server manually, no luck

View 4 Replies View Related

Fedora Installation :: F15 Iso Burning Fails Repeatedly?

Jun 1, 2011

Fedora-15-i386-DVD.iso file, sha256sum is correct. Burning by k3b on a fedora14 system fails again and again at 98.4% of the burning. I downloaded again to another partition and the same happens again. The k3b-debug output:

[Code]...

View 1 Replies View Related

OpenSUSE Network :: Can't Setup Internet Connection Wired Or Wireless

Mar 11, 2011

I have just done a new install of the latest opensuse 32bit and for some reason I cannot connect to the internet, when I click on mange connections the vpn tag is highlighted and all the other tabs are grayed out and I cannot select them. So I can't setup a internet connection wired or wireless. I was just using Kubuntu and did not have this problem. My card is broadcom.

View 9 Replies View Related

Programming :: C Code Fails On Repeatedly Opening /proc?

Jan 16, 2010

I am trying to run my code repeatedly in a loop about 50 times for timing measurement. I have C code running on ubuntu 8 on a single processor, Intel x86. My code is something like this

Code:
for (loop =0;loop<=50;loop++)
{
// other operations
pDir = opendir("/proc");
while (pDir == NULL)

[Code]...

After about 28-29 times the loop stops executing. I initially had a return -1 if I got pDir == NULL. That caused my program to exit, and I dont want that. Any clues on why this happens, and how I can circumvent this?

View 1 Replies View Related

OpenSUSE Install :: 10.3 Network - Configure Ethernet Connection Or Wireless Card

Oct 2, 2010

I installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.

View 4 Replies View Related

OpenSUSE Network :: KNetworkManager Connection - Never Obtain An IP Address From Wireless Router

Feb 24, 2010

I have an open WEP wireless internet connection with a security key. KNetworkManager can never obtain an IP address from my wireless router, but I know that the router works because Windows can connect correctly and Ubuntu's NetworkManager can connection correctly. Does anyone know what is happening? KNetworkManager just asks for my security again and again and again after it fails to connect.

View 8 Replies View Related

OpenSUSE Network :: Connecting To Home Wireless In 11.3 - No Connection (websites Will Not Load)

Jan 22, 2011

I've just installed openSUSE 11.3 for the first time on a Dell E1505 notebook and am having problems connecting to my home wireless network. Using the Network Manager I've been able to find my home network and connect after entering the network password. After a minute or two the wireless network is still shown as active but their is no connection (websites will not load).

I'm completely new to Linux so I have almost no clue what could be causing this. I have tried connecting the notebook hardwired (Ethernet) to the router and get a perfect connection if that information helps any.

View 3 Replies View Related

OpenSUSE Wireless :: Internet Connection Stops When Plug In Local Network?

Jul 25, 2011

I have a wireless cable modem/router and a PCI-E 1x wireless card in my desktop PC. It works perfectly until I connect my Ethernet cable to my local router and printer, no more internet connection. I am guessing there is a setting somewhere that tells the networking software that the hard wire connection is the primary internet gateway. How do I tell it to use the wireless as the primary gateway?

View 4 Replies View Related

Ubuntu :: 10.04 - VPN Connection Fails Over Wireless

Aug 11, 2010

I am using Ubuntu 10.04 64bit but so far all attempts to connecting over wireless give the same end result "VPN Connection Failed" from the [URL] at the end of the page as a link to a blog [URL] first problem is I can't restart network manager

Code:
sudo /etc/init.d/NetworkManager restart
return command not found, but if I use this
Code:
sudo service network-manager restart
works, maybe the problem of this connection is because I attempt over wireless.

View 1 Replies View Related

Ubuntu Networking :: Losing Wired Connection Repeatedly?

Nov 1, 2010

I did a clean install of 10.10 just under a week ago and something is really wrong with my wired connection. I keep loosing all connectivity and have to connect again from the panel app. After that, every thing works again for about 30 to 60 seconds and the the connection goes again. No lost connection notification pop up or anything like that, but i cannot browse the web or download upgrades while the connection is gone.

Then the really weird part. Sometimes my connection works just fine. On some boots everything is fine for a long time (hours?) but then the problem comes back. My network card is an Intel 82567LF-2 and it uses the e1000e kernel module. I dual boot to Windows Server 2008 R2 and there I have full connectivity all the time.

View 1 Replies View Related

Ubuntu Networking :: Wireless Network Connection Active But Still Not Internet Connection?

Jan 24, 2010

Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)

ubuadmin@ubucomputer:~$ ifconfig

wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved