OpenSUSE Wireless :: Manually Configure Network Interfaces?

Nov 20, 2010

I'm building a wireless router based on OpenSuse 11.3 I have experience with Debian, but here I'm confused howto manually configure network interfaces. I need my wireless card to work in master mode, so I need to place

[Code]...

View 3 Replies


ADVERTISEMENT

Ubuntu :: Configure /etc/network/interfaces To Log States?

Dec 18, 2010

I'm trying to configure /etc/network/interfaces to log whenever an interfaces goes up or down into a file, using this format: UP/DOWN [DD-MM-YY/HH:MM:SS]

How exactly do I use commands with the UP and DOWN directives?

View 4 Replies View Related

OpenSUSE Wireless :: Configure Wireless From YAST> Network Settings?

Jun 24, 2011

I am trying to configure a wireless connection from YAST under the Network Settings tool.It doesn't seem to do anything. My USB wifi device is detected in YAST > Hardware and I am using the module it says Hardware is using. It doesn't seem to save the module under YAST> Network Settings> Network Card Setup. Is this tool broken or useless? It seems setting up WiFi should be easier than this. YAST should work shouldn't it?

View 9 Replies View Related

OpenSUSE Network :: Configure Belkin Wireless USB Adapter (F7D2101)?

May 26, 2010

configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.

View 1 Replies View Related

Programming :: Detecting Wireless Network Interfaces?

Dec 9, 2010

My C++ program must be able to detect EVERY Wireless Network Interfaces under Linux operating system and display the interface names on the screen.How can my application achieve this?Is there any sample codes?Is there any third party libraries can do this?Notes: The detected wireless network interfaces should also include the virtual interfaces, like the one created by Aircrack-NG's Airmon-NG script.

View 1 Replies View Related

OpenSUSE Install :: 10.3 Network - Configure Ethernet Connection Or Wireless Card

Oct 2, 2010

I installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.

View 4 Replies View Related

OpenSUSE :: PHP Not Working. Help \ Manually Configure It?

Aug 10, 2011

I'm supposed to migrate a website I'm working on from Windows to Linux, so I downloaded the whole site from its webserver to my Linux enviroment, but, although everything work perfectly under Windows, on Linux all the scripts just won't load, and I ain't got no idea of what could be the problem causing this - but I had installed phpMyAdmin and it worked fine. I'm using Apache 2.0 (2.2.17-4.5.1), PHP5 Module for Apache (5.3.5-5.14.1) and MySQL (5.1.53-4.7.1) under openSUSE 11.4 x86_64. Oh, I had the same problem when trying to load the page under Mandriva 2010.

So I tried to reinstall Apache as well as PHP and phpMyAdmin following the instructions in here step by step, but, after reinstalling these not even phpMyAdmin is working anymore, and if I call a(ny) php page from localhost in the browser, a download window pops up, which means Apache doesn't recognise the php ile as a script to be executed by php machine, or something like that.Looking at httpd.conf (apache configuration file) I noticed there's no reference to php module. I tried to manually configure it, but it seems there's also no libphp5.so in my computer (tried to find it using dolphin's search feature)... I guess I'll have to unninstall everything php related and then try to compile PHP from source and just thinking of that already gives me headaches

View 9 Replies View Related

Ubuntu Networking :: No Network Interfaces (neither Ethernet, Nor Wireless) Detected?

Mar 2, 2010

Problem:I got a new Acer Aspire 8935G notebook, installed Ubuntu 9.10 on it and everything is fine, except the fact, that it wont detect any network interfaces (or how to call it So there are no ethernet or wlan connections available in the network-manager..

lspci gives me following lines:
joe@IGNAZ ~ $ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev

[code]...

View 9 Replies View Related

OpenSUSE Network :: Network Manager Default Connection Can Handle Virtual Interfaces?

Jun 7, 2011

I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?

View 4 Replies View Related

Ubuntu Networking :: Connect To Wireless - Settings In The /etc/network/interfaces Are All Messed Up

Feb 17, 2010

the default for /etc/network/interfaces? I believe I screwed it it up because I can detect my wireless, it just won't allow me to connect to it. The settings in the /etc/network/interfaces are all messed up. I'm running Ubuntu 9.10.

View 2 Replies View Related

Ubuntu Networking :: Adding Interfaces To /etc/network/interfaces?

Apr 16, 2010

If I try to add a new interface (eth1) to /etc/network/interfaces, I get

Code:
* Reconfiguring network interfaces... SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device

[Code]...

How do I add 2 interfaces and get anyone of them to work, as available ?

View 5 Replies View Related

Ubuntu Networking :: Web Browser And Two Interfaces How To Manually Choose

May 30, 2011

I have wired connection Ethernet (eth0) and 3G connection GSM (ttyUSB0). Firefox uses eth0, but sometimes, I want Firefox to use ttyUSB0. How could I do that?

View 6 Replies View Related

OpenSUSE Network :: Can't Get Interfaces To Come Up Without IPs

Apr 19, 2010

I'm trying to configure OpenSuSE 11.2 with Open vSwitch, and I'm having trouble getting various interfaces to come up automatically when I have bootmode set to "none." startmode is set to auto (or on - tried both), and bootmode set to none, with no IP address assigned in the file. At boot time, I get the message that it's bringing up eth0, for example, but when I log in and check, the interface is not up. Also, if I try "ifup eth0", I get the following output:

xen-users:~ # ifup eth0
eth0 device: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)

but the interface is not brought up. why SuSE is saying that it's bringing up the interface successfully, but is actually not bringing it up?

View 1 Replies View Related

OpenSUSE Network :: Outgoing Traffic When Using Virtual Interfaces Changed In OS 11.4

Jun 9, 2011

There is a big problem with opensuse 11.4 and virtual interfaces.Until 11.2 outgoing traffic by default was sent by the eth0 address nevertheless which virtual interfaces did exist if any was used.Now there seems to be sent by the last interface listed with ifconfig.The outgoing address in this case will be 10.0.0.3.This is very problematic with smtp control etc.

View 1 Replies View Related

Ubuntu Servers :: Airport Card On A Wireless Network - Couldn't Auto-configure My DHCP Network

Aug 13, 2011

I've installed the Ubuntu 10.04 Server onto a PPC G4 Mac just for the experience of setting up a server. During the installation process Ubuntu couldn't auto-configure my DHCP Network. I'm using the airport card on a wireless network. How can I manually configure the network once Ubuntu is installed.

View 6 Replies View Related

OpenSUSE Network :: Connect To DSL Using YAST Manually?

Aug 23, 2010

I have installed 11.3. Now for DSL I use PPP over Ethernet. I have configured DSL via YAST and it works fine. The connection is set at boot.

Now I want DSL to connect manually not at boot time. I did changes in the YAST/DSL to start Manual and rebooted. Once rebooted how do I connect?? Like any button/applet ??

View 1 Replies View Related

OpenSUSE Network :: Manually Changing DNS Settings?

Jan 8, 2011

once upon a time i manually entered my ISP's DNS servers in /etc/resolv.conf Now i have changed ISP, my old DNS setting are still present even though i have edited my resolv.conf file to my new ISP's DNS servers. Internet still works fine, i just want to use my new ISP's DNS as my old ISP will be closing its doors very soon. Am i doing something wrong, or better put.forgot to edit another file..? I did do this a while ago, so i apologise in advance for my incompetence. I'm stilling running 11.1 / Router has DHCP configured. my resolv.conf file is below

Code:
cat /etc/resolv.conf
### /etc/resolv.conf file autogenerated by netconfig!
#
# Before you change this file manually, consider to define the
# static DNS configuration using the following variables in the
# /etc/sysconfig/network/config file:
# NETCONFIG_DNS_STATIC_SEARCHLIST

[Code]...

View 9 Replies View Related

OpenSUSE Network :: Help_no Interfaces Shown In Yast-firewall - Dns Server Won't Start

May 1, 2010

This morning I was configuring a DNS server through Yast at home, I've done it once before (in another wireless lan)and it works perfectly. But this morning, after I clicked "start dns server now", everything freezed, and caps lock light on keyboard kept flashing. I rebooted laptop,it couldn't boot into run level-5 and there were few "skipped" items and "failed" items displayed.... Sorry I'm new to linux so I re-installed it this afternoon, and kept /home partition, formatted / partition.

Everything seems to be fine after re-installation, again I tried configuring a DNS server and clicked "start dns server now", but the same problem appeared, caps lock light kept flashing and I rebooted the laptop but fortunately this time it didn't fail on any items when booting

In Yast-Network Settings, I choose "use controlled with network manager", and I can connect to wireless router and browsing web, but there are no any interfaces shown in Yast-Firewall, and this time, after I clicked "start dns server now", nothing happens, dns server just won't start...

View 7 Replies View Related

Debian Configuration :: Networking - Netinst CD - Internet Connection Only Works After Edit The Interfaces And Resolv.conf Files Manually

Aug 3, 2010

I had some trouble with the netinst CD and I had to install lenny with the 6DVDs instead. My internet connection only works after I edit the interfaces and resolv.conf files manually. So my question is: can I do that from the netinst CD before it actually needs the connection to install everything? (otherwise I'll just need to use the DVDs.

View 4 Replies View Related

Ubuntu Networking :: "Split" Network Interfaces - How Airmon-ng Let Use Wireless Card In Managed And Monitor Mode

May 25, 2011

Can you "split" a network interface in Ubuntu, similar to how airmon-ng lets you use your wireless card in managed and monitor mode, by making another interface out of the same hardware? I know it'd be slower, but I'd still like to do it.

View 4 Replies View Related

OpenSUSE Network :: No DNS Caching Until Manually Restart Dnsmasq?

May 29, 2010

My upstream DNS server is a bit slow, so I've installed the dnsmasq cacher locally. I have the service starting on runlevels 2, 3, and 5. But I can tell by Firefox's behavior that dnsmasq does not work upon boot. Firefox lets its own DNS cache expire after 60 seconds. When I do my second Google search five minutes after my first, the second DNS lookup for www.google.com is just as slow as the first.If I manually restart the dnsmasq service, I get the fast name resolutions I expect.

View 2 Replies View Related

OpenSUSE Network :: 11.3 With LXDE: Manually Defined Ports Are Not Getting Through The Firewall?

Sep 21, 2010

I'm using opensuse 11.3 32bit with LXDE. I have configured an apache tomcat server listening on port 8080. Yast was used to open udp 8080 and tcp 8080 in the firewall by manual entry under the advanced button of 'allowed services' menu.Another system was used to access the tomcat server via a firefox webbrowser. The attempt was unsuccessful. The url used was [URL]. firefox webbrowser keeps showing'connecting ...' until timeout. I'm assuming that inspite of the specified port openings in the firewall, it is somehow ignored. If I were to disable the firewall, then I can access the tomcat server with the firefox webbrowser.

View 2 Replies View Related

OpenSUSE Wireless :: When Click The Button To Connect To A Wireless Network This Message Apears:Network Management Disabled?

Mar 23, 2010

When i click the button to connect to a wireless network this message apears:Network management disabled

View 1 Replies View Related

General :: Iwconfig - Can't Configure Wireless Network

Mar 6, 2011

I've beenhaving some trouble getting my wireless network card working on my Slackware 12 box. Currently it identifies the card and can scan for networks, but I can't seem to join a network. Here's some output:

{8:46:29}gibson:/lib/modules/2.6.33.4-smp## iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: F8:1E:DF:FF:DA:39
ESSID:"MasterControl"

[code]....

It doesn't seem to be accepting the essid setting, and it's giving an error for the key setting. Also, I'm noticing an inconsistency in the wireless protocols. The AP claims that it's 802.11g with rates up to 54 Mb/s. But it should be 802.11n. It's an Apple Airport Extreme and the Radio Mode is set to Automatic and displays "802.11a/n-02.11b/g/n" on the Airport Utility. The interface also claims that it's 802.11g, though shows a rate of 300 Mb/s. It's a Belkin "Play" Wireless USB Adapter (F7D4101).

(Note: I'm using ndiswrapper and the WinXP drivers which were installed from the Belkin software.)

View 1 Replies View Related

Networking :: Configure Wireless Network - Iwconfig

Feb 6, 2010

I still cannot access to internet. May I know why?

Is it due to the Error for wireless request "Set Encode" (8B2A)

The step i did:
1) iwlist eth1 scanning
2) sudo iwconfig eth1 essid shabana key s:xxxxxx
3) invoke firefox ... cannot surf

Do I need to set dhclient? how should I set? DO I need to enable wpa_supplicant?

iwlist eth1 scanning

sound like I was able to connect to ESSID:shabana. Is it true?

The linux is Centos 5.4

View 3 Replies View Related

General :: Unable To Configure Wireless Network On Red Hat 5.0?

Oct 8, 2010

I HAVE DUAL BOOTING SYSTEMVISTA + RED HAT 5.0ON VISTA I CAN RUN WI FIBUT ON RED HAT IT CANT WORK AND SAYS CANNOT ACTIVATE NETWORK DEVICE eth13c501 device eth1 does not seem to be present delaying initialisation.

View 1 Replies View Related

Slackware :: Configure A Wireless Network With WAP Key But It's Not Working

Feb 23, 2011

I was trying to configure a wireless network with WAP key but it's not working!

Quote: Error for wireless request "Set Nickname" (8B1C) : SET failed on device wlan0 ; Operation not supported.

rc.inet1.conf
Quote:
IFNAME[4]="wlan0"
IPADDR[4]=""
NETMASK[4]=""
USE_DHCP[4]="yes"
DHCP_HOSTNAME[4]="guihost"

[Code]....

View 10 Replies View Related

General :: Configure A EDUP Wireless Network Card?

Aug 8, 2011

How do I configure a EDUP wireless network card

View 1 Replies View Related

OpenSUSE Network :: Configure A Connection With YAST As Well As With Network Manager?

Feb 1, 2010

Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.

I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).

I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.

View 1 Replies View Related

OpenSUSE Network :: Cannot Start Network Manager - To Configure My Wlan ?

Nov 27, 2010

I have just installed opensuse 11.3. I am absolutely new for Linux and for this forum. I have tried to open Network manager to configure my wlan. But its not starting. How to start network manager and configuring my wlan.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved