I've installed new drivers and when I go to connect the MAC address shows up on the router but only for a few seconds and then disappears and I can't access wifi. I've even attempted opening up the router and still can't connect.
This is my first post! I am a brand new Linux fan and am determined to understand how this system works! I am running Fedora 11. My wired NIC works just fine. I am having problems with wireless. I ran lspci -v to find my driver details, found it online and got it working so it would show up in the network configuration. I am having problems getting it to work from there. I am used to getting windows to install the driver and then being able to search for wireless networks. When I try to activate it i get:
02:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Subsystem: ASUSTeK Computer Inc. WL-138G V2 802.11g WLAN PCI Card Flags: bus master, fast devsel, latency 64, IRQ 21
I've been reading up on how to get the Broadcom BCM4312 802.11b/g on my Dell Inspiron 1525 to work with OpenSUSE and I've tried everything, I've even re-installed the OS 3 times as I seemed to keep screwing something up. I've tried doing what it says in this thread Install Broadcom Drivers from Packman I thought I'd installed the write drivers with this code: Code: zypper in broadcom-wl broadcom-wl-kmp-default
I am having a problem while connecting to a D-Link Access Point with Multiple ESSID. It keeps saying activating but in the end nothing. I am using KnetworkManager & there is no Encryption on the Access Point.I am able to get connected with another machine using windows.Here is my hardware info:
0c:00.0 Network controller : Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Kernel driver in use: b43-pci-bridge & the logs: Feb 3 15:44:00 Shiraz-Suse kernel: [ 316.188245] wlan0: authenticate with f0:7d:68:17:e5:a4 (try 1) Feb 3 15:44:00 Shiraz-Suse kernel: [ 316.191262] wlan0: authenticated Feb 3 15:44:00 Shiraz-Suse kernel: [ 316.191501] wlan0: associate with f0:7d:68:17:e5:a4 (try 1) Feb 3 15:44:00 Shiraz-Suse kernel: [ 316.194008] wlan0: RX AssocResp from f0:7d:68:17:e5:a4 (capab=0x421 status=0 aid=1)
I recently installed Suse 11.4 on my Dell Latitude 2110 netbook using the KDE live distribution, and, after that, the Broadcom wireless ceased to work. To enable the wireless connection, I have to press Fn + F6. If I do it now, the wireless led indicator turns on for a couple of seconds, then turns off again. Moreover, the option to enable the wireless connection in the network manager is greyed out
Code: wlan0 IEEE 802.11abgn ESSID:off/any Mode: Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit: 7 RTS thr: off Fragment thr:off Encryption key: off Power Management: off dmesg output:
Code: [8.330963] brcm80211: module is from the staging directory, the quality is unknown, you have been warned. [8.362403] brcm80211 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [8.362422] brcm80211 0000:0c:00.0: setting latency timer to 64 output of rpm -qa | grep broadcom:
I recently installed suse 11.4 x64 onto my hp tx2000 tablet. everything has been working great including the wifi card. It's a broadcom 4328 a/b/g/n/bluetooth card and it was using the broadcom-wl driver. Earlier today i plugged in an usb wifi adapter to test whether it worked on suse plug and play. Well after plugging in and using this wireless adapter, my internal wifi card is no longer visible to the system. I've tried lspci and its not displayed. I booted into a different suse install and it wont work there. My bios does not seem to have a disable feature and the killswitch is in the correct position. The bluetooth is working but the wifi is not. In lspci i used to see "hp integrated (wireless+bluetooth)" and "broadcom 4328..." but now only the former.
I have installed Ubuntu 10.4 (with all recent updates) on my hp nx6125 with broadcom bcm 4318. I have tried installing fw-cutter from synaptic package manager but it didnt show up on hardware drivers. Do I have to do something else as well with it?
I have had a Broadcom Corporation BCM4318 since Fedora 10. In addition, both Fedora 10 and 11 wouldn't recognize the card with out third-party drivers. I was pretty excited when I booted the 12 Live CD and it recognized it at boot.
Since this is my lab box I thought its time to give Fedora 12 a try.
I did an DVD upgrade from 11 to 12 and rebooted. The Broadcom came up fine this time. I did a yum upgrade to finish from whatever was not on the DVD and rebooted. This time no 'b43' network card was recognized. I still had my third part driver files so I:
I installed Ubuntu 9.10 on my Acer 5024wlmi and followed this guide from Ubuntu community to enable my Broadcom AirForceOne BCM4318 wifi card.Now the wireless adapter is on (laptop front led also is on), I can see active wifi networks but connection fails (even with a simple ad-hoc open wifi network!). I tried with Network Manager/WICD/Wifi Radar and also using terminal lfconfig/lwconfig commands without success. It seems that my wifi card cannot ping access points: for example see this log from WICD connection session:
There is a new feature in Windows 7 that make u able to create a virtual WiFi and share ur internet access with many others.
I know there is ad-hoc but sometimes it has problems, for example I couldn't connect to my friend's ad-hoc network (he is using Windows 7) but I _could_ connect to the virtual WiFi he created, it appeared just like any other wireless network unlike ad-hoc
so is there any way to create a virtual WiFi and not ad-hoc in Linux?
I just installed 9.10 and I can't detect any wireless networks. Is the card compatible with 9.10? Do I need to install any drivers? If the card isn't compatible with 9.10 is it compatible with later versions of Ubuntu? Marking this as somewhat urgent as I need to get internet access for some coursework soon, and also because my parents will kill me if they find out I've done anything unusual with the laptop because it's new and they think anything non -MS is a virus.
I'm happily using OpenSuse 11.2/KDE on my laptop equipped with a Broadcom BCM4311 WLAN chip, but today, after a restart, WLAN ceased to work. I mean that Network Connection doesn't show anymore available WLANs. Two things that seem strange to me are that the
I have this problem with my wifi for 2 weeks now.It used to work great and after some updates the Network Manager keeps rejecting my wpa passwords. The wifi card is working (tested with other OS's) and the wifi light on my HP laptop is on. I have installed broadcom drivers.The problem is similar with this one here but changing from default kernel to desktop didn't work in my case. have already read through Getting your Wireless to work and Broadcom instructions
I recently bought Dell Studio 15 laptop, installed OpenSUSE11.2/64 in addition to Win7 64 bit. I am trying to connect it to my wireless network at home and at work, but without much luck.
1)Found out that Dell 1520 WLAN adapter has Broadcom 4353 chipset. 2)saw that b43-fwcutter installed 3)installed broadcom-wl and broadcom-wl-kmp-desktop
After that can see many wireless Access Points at home,selected one via NetworkManager (eth1), configured it (incl. security same as in Win7), it goes from Activating to Active, but I still can not connect - I mean, in the FireFox - "page not found"
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller : Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
I'm trying to install my pci wireless card that uses bcm4318 technology. I installed ndiswrapper and the driver for the card. However, I still can't seem to get wirelessworking. I'm not sure what info you will need to help me diagnose this problem. Here is the output of ndiswrapper -l:
Just installed Ubuntu on my sister-in-law's emachines. Suddenly, her computer's not finding any wireless networks (although the other two Linux computers in the house find and connect just fine, as did her computer when it ran Windows).
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
I've search for info on configuring ndiswrapper for the BCM4318 Wireless card. All I've been able to find is information on Ubuntu and Debian, which don't seem to use the same methods for configuration. Has anyone configured ndiswrapper for this or any wireless card on CentOS 5? I've installed 5.4.
I recently tried to install Crunchbang on my IBM Thinkpad T20 laptop. Everything went OK as far as I can tell (I still have to adjust acpi and display settings), but I cannot get my laptop to connect to the internet via wireless (wired connection works fine). I've done a good deal of searching online, and I realize that my wireless adapter (wpc54gs, bcm4318 chipset) is problematic in linux, and that b43-fwcutter is typically required. I did install b43-fwcutter, and it seemed to install OK, but nothing subsequently happened when I opened networkmanager. I'm not sure at this point if my problem is that I don't know how to configure any wireless adapter in crunchbang, or if it is that my particular adapter is not being recognized.