i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 220.127.116.11 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 18.104.22.168 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
I downloaded openSUSE-11.4-KDE-LiveCD-i686.iso from software.opensuse.org: Download openSUSE 11.4 yesterday.It's a liveCD,not a DVD. Then I used a dd command to make a live USB by the instruction from this page:SDB:Live USB Then I shut down the computer,and boot from the usb. I went to the yast--DSL to make a new adsl connection.But after I configured everything,yast told me one package needed.The package's name is "linux-atm-lib". I haven't connected to internet.How could I do to install a package and make a connection?
Now I am downloading a DVD.Does a DVD include the package called "linux-atm-lib"?
I have been having come problem, my surfing speed has gone to zero. I can download at full speed but surfing is crawl speed or just timing out. I am pretty sure it's because firefox is clogged, I just want to know is there a way to clear the clog w/o losing my settings? I fixed this before by making a new user, but I don't want to loose all my saved form's and bookmarks.
I do have a problem with my internet connection at home, I've a Huawei router and ubuntu 10. When I connect to the internet whether wireless or wired I become able to surf the internet for less than 10 min then it cuts off! and to be able to surf it again I need to restart the whole system!
I used this command to restart the networking but in vain Code: sudo /etc/init.d/networking restart
On windows I do not face this problem with the same internet connection. I do not face it either when I'm using my campus wireless connections using ubuntu/windows!, so the problem is related to my home connection+ my OS.
My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
My 32-bit Ubuntu 9.10 [Karmic Koala] LTSP server has two NICs, one with Dynamic IP set by a DSL modem and the other with static IP of 192.168.0.254. I also have 4 thin Clients that boot from this server without any problems and another computer with Ubuntu 9.04 running some PHP programs with dynamic IP given by the same DSL modem. When I send requests to these PHP programs from thin clients, they all give the LTSP server's dynamic IP as their IP so I cannot trace who has sent this request to response back.
I actually know this is logical. Because the requests are sent by a program that's actually running on the LTSP server rather than the thin client. But my question is How can I run a program on a thin client with it's own IP? I also should mention that the dhcp3-server service running on the LTSP server has no conflicts with the DSL dhcp on the network and I know that the 4 thin clients get the IPs ranging from 192.168.1.101 through 192.168.1.104 from the dhcp3-server service. Because I can ping them while they're on. but /sbin/ifconfig on them shows info about the LTSP server.
I have an ADSL line that allows me for maximum of 4 concurrent users with external IP addreses. The IP addresses are not static (they change every 3-4days).
My current setup is as follows: * A-link Roudrunner 44B Modem connected to the main line * D-Link DI524 Router (port 1) connected to the modem * This leaves me with 3 ports and Wireless for my other machines
What I wish to do is: * Have all my machines with static IP addresses for LAN * still have internet connection
I've tried enabling DHCP on the D-Dlink Router with LAN IP 192.168.0.1 and IP range from 192.168.0.100 - 192.168.0.199. Then gave my machine static IP 192.168.0.101, subnet 255.255.255.0 and gateway 192.168.0.1....obviously it didn't work. I've tried the above with both the modem being connected to the router via port1 and WAN port... but I have the same results. I also tried to do the same without the router (direct connection between the PC and modem) still got the same results. Could it be that what I am trying to do is not technically not possible due to my ISP setup to ensure no more than4 concurrent users limit is in place.
I have a handful of openSUSE 11.4 machines that I allow users to use the GUI for web surfing and writing documents and I am meanwhile running scientific computing jobs in the background. Every now and then, someone clicks "shutdown", "reboot", or "hibernate" and ruins my afternoon.
I've searched Google and these forums for ways to prevent a normal user from shutting down the system, but so far haven't had any luck in finding a solution. I have found instructions for just about every other Linux OS, except openSUSE though. These machines are running LXDE, but my preferred solution wouldn't depend on the particular desktop solution in use.
I have an valid account,and I used pppoe-setup to set the dial correctly.After the configuration,I typed "ifup ppp0",nothing wrong happens(no news is good news?).Then I typed "pppoe-status",it said I've connected to the internet . I opened firefox,updated my system through yum ,they all said I haven't connected to the network!!!I've formated my harddisk and reinstall my system,but the problem is still.
have a netopia 3347-02 Wireless ADSL Gateway that i got from at&t. i am no longer with at&t.i switch over to cox. I have the cox modem. i also have cable on the modem. when i connect a ethnet cable from cox's modem to my laptop my internet works. but i want to use the netopia 3347-02 Wireless ADSL Gateway that i got from at&t cause of the wifi. when i login & connect to the netopia 3347-02 Wireless ADSL Gaut it in bridge mode.internet works fine, but im not able to use wifi, im also not able to login into the admin page. i have to do a factory reset on it so i can log back in. So how can i make it work with cox modem?
I'm a beginner in Ubuntu, I'm using Ubuntu 9.10. Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.
My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.
i have a leased line ( speed 2 MB ) which we use to connect to our mail server , oracle ERP etc.. we have a dhcp scope defined as 192.168.100.1-192.168.101.254. with a default gateway as 192.168.100.90 ( which is a cisco router ) we have a pix firewall ( 192.168.100.10 ).. now the gateway passed all the request to firewall..
we have an ADSL of 4 MB speed.. ip is 83.*.*.230 from ISP. i have a proxy server ( squid ) eth0 is connected to ISP (83.*.*.230).. eth1 to LAN ( 192.168.100.79 ) now the problem is when i put default gateway to eth1 ie 192.168.100.90 the squid connects to internet via leased line.. if i leave the default gateway field empty on eth1 , the squid connects to internet via ADSL ( which i want ) but the problem is no one on the lan cant ping the squid server ( no connectivity to internet for the whole LAN ) how can i solve this problem? i want squid to connect to internet with ADSL, but if i put gateway on eth1 ie LAN squid goes through leased line which i dont want to happen.
how to make a user, not root, connect to internet? without having to type as root:Quote:# pppoe-startin an ADSLAlso ... to exit the Internet having to type, also as rootuote:# pppoe-stopBuilding on the topic: Is there a graphical interface for ADSL connection ?
i cant connect to adsl with pon dsl-provider or any command line. just network manager applet GUI works for me. i follow this guide [URL] and try about 3 hours but without success. i edit /etc/network/interfaces following this thread: [URL] but after any alteration in /etc/network/interfaces and restart network my adsl connections are not work at all and also i lost my GUI applet connections too. then i have to back /etc/network/interfaces to its original content and restart my computer to restore my connections
pon dsl-provider error is:
Plugin rp-pppoe.so loaded. RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
I installed Suse 11.2 on clean HD. I cannot connect to the internet. Seems like Suse didn't install drivers for on board ethernet card. It is a Marvell Yukon 88E8056. I'm new to this and don't know how to install the drivers.
I have SUSE 11.0 set up to act as a router/firewall for my home network to the internet through a cable modem attached to an Ethernet card. When I was laid off several years back, I found information that let me connect my network to an ISP via a standard serial modem. I am considering going to the Sprint U1901 4G USB modem and dropping cable internet. Sprint claims the U1901 is Linux compatible. My thoughts are that using the 4G modem should be similar to the old dialup modem. I had a script that connected to the internet whenever internet traffic was detected. Unfortunately, I did not save notes on what I had done to setup the modem to dial automatically, and I have been unable to locate information that seems good to set this up again. I already know that all I had to do to get routing working was simply replace the internet port in the firewall/routing script with the port for the modem. So I assume that is rather trivial.
Would you please point me to a doc, perhaps SuSE specific, that gives reasonable directions on how to set up a "dial on demand" ISP connection? I assume that the 4G modem will be very similar to my old serial modem so that a dial on demand script will work. I did find a dial on demand howto, however, it did not seem to apply.
In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
I'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command: echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.
Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.