OpenSUSE Network :: Use Scp - Set Basic Path ?

Apr 3, 2011

I tried to use scp like..scp -p 1234 111.222.333.444:/home/anonymous/asdf.asd /home/cognita/

This command asked me password and after typing password it showed Set Basic Path and didn't copy..

View 9 Replies


OpenSUSE Network :: Xen NAT Setup In 11.2 - No Basic Connectivity?

Feb 21, 2010

I am experimenting with Xen with the standard kernel (kernel-xen package) and utilities. I already got bridged setup to work with a single domU, but found out that because of my wireless card I cannot expect bridging to work when connected wirelessly. Now I am trying a NAT setup but I cannot seem to get any network connection from the domU to the dom0 and viceversa. Comparing the network devices and routing tables of others, I cannot see any problem.

The domU runs with IP and the dom0 has a vif with IP with a default gateway of Pinging from the domU to the dom0 and viceversa does not show any traffic at all when I use tcpdump to monitor eth0 in the domU or the vif interface in dom0. It seems that basic connectivity of the vif interface and eth0 in the domU does not work. Any tips on how to debug this problem?

View 1 Replies View Related

Red Hat / Fedora :: Searching Path Of Some Basic HW Values

Apr 22, 2010

I would like know in which file is the machine name, os type and processor architecture stored in? I would like to know the path to those files where the value for os is i386 and machine i686 is something like this, in which file the systemuser and the number of users of that system is stored

/usr/src/redhat/RPMS/ ...

In these files i686 and I 386 is stored as directories and not as values but I want them as values in the file.

View 4 Replies View Related

OpenSUSE Network :: Unable To Setup 10.3 As Samba PDC - The Network Path Was Not Found

Jun 1, 2009

I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.

View 7 Replies View Related

Fedora Networking :: Playing Video Over Basic Network

May 3, 2009

Basically I've just set up a very basic network connecting my vista laptop to fedora 10 laptop via ethernet. I download from the fedora box to an external hd which I can access from both computers. So, my question is, is it possible to have the same video play on both machines, in sync?

View 4 Replies View Related

Ubuntu Networking :: Setting Up P2P Basic Wireless Network

May 5, 2011

I am new to linux and just set up my wired network, still a few kinks that needs to be sorted out. When setting up a wireless connection, what is needed for a basic p2p network. Wireless connection from one laptop to another to enable sharing? What I have done was set up a wireless network on my windows machine, connect to it using ubuntu. (this is all done with the built in wireless adapters, no routers). The connection is made, both the windows and ubuntu machines say connected, but none of the computers show up in the networks directory?

View 2 Replies View Related

General :: Difference Between PATH=$PATH:$1 & PATH=$1:$PATH?

Jan 16, 2011

I found the following function in /etc/profile file.


1. I dont undestand what "if ! echo $PATH | /bin/grep -qE "(^|:)$1($|:)"" this if statement actually comapres??

2. Also what is the difference between PATH=$PATH:$1 & PATH=$1:$PATH

View 14 Replies View Related

OpenSUSE Install :: Hangs At 'loading Basic Drivers'?

Dec 21, 2010

I got a new ASUS EeePC 1015PEM with Windows 7 with the intention to install OpenSuse 11.3 onto it for having a dual booting netbook with enough disk space.I'm installing from an external DVD drive, the checksums of the ISO were ok as well.However, the OpenSuse installer fails at starting up after selecting the action. It hangs, no matter what menu entry I chose, at "loading basic drivers", forever.Because this isn't necessarily an unknown problem I've tried some of the predefined kernel options of the main installer menu. Then I tried some manually entered kernel boot options that helped me in some other installations:

acpi=off, apm=off, CPUFreq=noNone of them seem to have an effect on the installers behaviorI hope that there is people who managed to solve this problem with an actual EeePC model... because I really don't know what I could any more. It's kind of frustrating to not even get past the kernel launch I haven't tried any other distros installation discs, but I don't even intend to. I want OpenSuse because I'm running it on our firms machines as well and don't like shifting between systems.

View 9 Replies View Related

General :: Mount A 'path' From The Network?

Dec 20, 2010

My situation is that I've got a desktop within my university domain named 'pc1'. There are several other machines in my office as well, e.g., named 'pc2'. Every time, when I want to run some of the codes written by my group, I need to use 'ssh' to connect 'pc2':

ssh -X
cd /home/cs/group1

As my machine pc1 is under the same domain as pc2, is there a method to mount '/home/cs/group1' directly? (I've got the user name and password)

Then I can run the codes under '/home/cs/group1' directly on my machine.

I checked 'mount' command, but hasn't got a clue how to do it.

View 3 Replies View Related

Security :: TTL Increase Through The Network Path?

Jan 8, 2010

Many of you know how important is the analysis and planning of the targeted environment before the attempt of a successful penetration test. I got the idea, and I am trying to draw the network design in order to visualize things better. Many tools can be used to do that, I used hping3 as it comes with BT4, my favorite dist for pentesting, others include tcptraceroute, firewalk-5.0 (discontinued by developers...), etc.

What in fact is done by the program (hping3) is TCP/IP packet injection (with the SYN bit enabled) hop-by-hop until it reaches the final host (destination). By sniffing the traffic, I could determine the TTL of the various responding hosts within the path until my packet "got there".

As far as I know the default behavior of a network would be to decrement the TTL of a device as long as I go deeper on the network (meaning that I am getting closer the targetet IP). Like, for example, in a network with 3 devices (routers) before my targetet IP it would be something like this:

Quote: TTL 255 (my gateway) TTL 254 TTL 253 TTL 124 (target IP)

Demonstrating that the host is Windows based (TTL starts at 128) and is placed 4 hops from me. What I know by the notice though, is that sometimes the TTL increases. Likewise:


View 1 Replies View Related

Ubuntu :: Specify Network Path Filespec In A Command Line?

Aug 24, 2010

I need to add a network path to a configuration file, but I can't figure out how to write the path.

The command dir \computernamesharename works in a Windows command line.

ls //computername/sharename/ does not work under Linux. ("No such file or directory.") ls smb://computername/sharename/ does not work either.

Nautilus shows the location as smb://computername/sharename/, and I can read and write in the shared directory, so it's mounted and I have access.

So how do I get it to work? How do I specify the path so a command line will recognize it?

View 3 Replies View Related

Red Hat / Fedora :: Get The Info About What The DevmapperVolGroup_ID_10726-LogVolV Network Path?

Sep 3, 2010

I got dumpped into a enviroment where my knowladge of linux is sadly (yes sadly I actually want to learn more ) little. I have a server that was configured with a mapped drive.I have done the following and cant find where this is pointing. Checked the FSTAB and mount and df -lh and did a vi on the cronjob that does the copying and everything just gives me basically this information... brw-rw---- 1 root disk 253, 7 Jun 19 16:22 devmapperVolGroup_ID_10726-LogVolV How do i get the info about what the devmapperVolGroup_ID_10726-LogVolV Network path actually is, and edit it for that matter.

View 1 Replies View Related

Networking :: Add Network Attached Storage As Download Path

Feb 28, 2010

I have got a Arch Linux laptop running KDE. I have recently purchased a Dlink DNS 323 network attached storage and have installed Debian Lenny on it. I have been connecting to it via ssh and have created a network folder on Dolphin for easy GUI access ( using ssh protocol). However I cannot seem to figure out how to download stuff directly to the network drives. In firefox, it does not allow me to browse to the Dlink when I try to specify the download path.

View 3 Replies View Related

Server :: Samba And Karmic - Can't Find Network Path

Mar 8, 2010

a new hardisk and a reinstall later I find myself face with 2 problems now. firstly I followed, [URL]... which seemed to work fine, accross the network I can "see" all the workgroup computers. Now try login to karmic's or (other linux box) jaunty, can't find network path. tried turning off the firewalls, still no go. the two linux boxes can chat merrily, and the 2 windows boxes can chat, but to each other. however after fidling a bit , on karmic i now get

Quote: Could not display "network:///" Nautilus cannot handle "network" locations

so firstly how do i reinstall everything, the how deal with windows.

View 3 Replies View Related

Ubuntu Networking :: Setting Up LAN - \Lstoragemusic Is Not Accessible - The Network Path Was Not Found

Jan 10, 2010

I would like to know if there is a fairly easy "How To" for setting up my home network. I have 2 XP SP3 computers and 2 Linux with ver. 9.10. The XP boxes can see each other and share files and folders. I can see from an XP box one of the Ubuntu machines, but can't access any of the files or folders.

I get the following when I try: \Lstoragemusic is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found.

View 9 Replies View Related

General :: Vbox Sharefolder - Error: Systemerror 53 Has Occurred The Network Path Was Not Found

Jun 3, 2010

I installed vbox and windowsXP as guest and fedora13 as host. As discussed in [URL] i have run: Quote: $ VBoxManage sharedfolder add "WinXP" -name "Downloads" -hostpath "/home/rudra/Downloads" --readonly but in guest, as i prompted Quote: net use x: \vboxsvrDownloads it gives error: Systemerror 53 has occured the network path was not found

View 6 Replies View Related

General :: Move A File To Some Path And Create That Path When It Doesn't Exist?

Oct 8, 2010

I use this command:


find ./ -atime +360

to figure out the files that haven't been accessed since 360 days. The command above will return results like this:


... etc

I'm taking here about tins of directories, thousands of files. I'm looking to find a command that makes me able to move the results above to another path, and to create that path once it doesn't exist like below:


mv /uploads/2010/02/some-file-name.ext /old-files/uploads/2010/02/some-file-name.ext

But I want the executed command to create this path



If it doesn't exist.

View 6 Replies View Related

Programming :: Java Applet Not Loading Image With Relative Path But With Absolute Path / Resolve It?

Jul 17, 2009

Java applet not loading image with relative path(e.g. images/1.jpg) but loads image with absolute path(i.e. from /root/user/images/1.jpg) . This is a problem when i want to host the applet on web server

View 2 Replies View Related

General :: Forcing An Absolute Path Where A Relative Path Is Expected

Feb 21, 2011

I have a program that takes a relative path as input appends it to a some path string to get the actual path.

Now all I can input is the relative path. So if I want to go one level above my input will be ../mypath.

If I know the depth of the path used internally, I can use .. as many times to go to the root directory and then give the absolute path. But suppose I do not know the depth of the directory, can I construct a relative path string such that it considers it as a relative path. One way could be to have enough .. in the path string so that I can force an absolute path for some maximum depth of path.

Is there some path string syntax that I am not aware of but can achieve this?

View 2 Replies View Related

General :: Deleted Path Variable - How To Return To The Original Path Value

Apr 26, 2011

Experimenting with shell variables, accidentally deleted the path variable how could I return to the original path value. What kinds of problems will I have if I don't have a path variable.

View 3 Replies View Related

General :: Unable To Access From Windows Pc Shows Network Path Not Found Any Other Service To Start?

Dec 11, 2010

i format and reinstall centos after that i create one sambha share and valid users restart smb service but i am unable to access it from windows pc shows network path not found any other service need to start

View 2 Replies View Related

Red Hat / Fedora :: Appending A Path To PATH Variable Permanently?

Oct 21, 2010

how to add a path to PATH variable permanently so that it remains persisent even after closing shell and rebooting the system when i added a path, to variable it remained there as long as i didn't closed the shell. but when i reopened it ,changed were undone.

View 2 Replies View Related

General :: Change Windows Path To Unix Path?

Sep 14, 2009

I have a path c:windowsackup I need this string to be changed into /windows/back/up I used the command -bash-3.00$ echo windackup | sed 's/\//g' but the output is windbackup

View 7 Replies View Related

General :: Change Absolute Path To Relative Path?

May 31, 2011

Current script:-

find . -depth -type d -name .git -printf '%h�' | while read -d "" path ; do (
cd "$path" || exit $?


How shall i go about changing the absolute path to relative path, so that /home/git/mirror/android/adb/ndk.git gets converted to /mirror/android/adb/ndk.git //echo <command> "$prefix$PWD.git" ?? - anything for relative path?

View 7 Replies View Related

SUSE / Novell :: Add Path To $PATH Variable?

Apr 19, 2009

I am trying to figure out how i can add the path /usr/sbin/ into the $PATH variable. I want this to be used from the normal account. I am bored settinh this manualy each time my computer starts.

View 2 Replies View Related

OpenSUSE Install :: 11.2 64 Installation Hangs At "Loading Basic Drivers"?

Jan 23, 2010

I am trying a new install of opensuse 11.2 64 on my computer. I have tried all the F key options at the bottom of the installation screen but when loading the installation hangs at "Loading basic drivers..."I get the same issue with the 32 bit version of 11.2 and the 64 bit version of 11.1.The 32bit of 11.1 proceeds to install only to crash out with error 3030 when it tries to format an lvm parition.

View 9 Replies View Related

OpenSUSE :: Putting A Program In Path?

Jun 12, 2011

I am not sure does the title make sense with regards to my query.I am using OS 11.4 gnome.I installed a program (PLINK v1.07) by compiling its source.i compiled the source code in the following folder using "make"

Which created an executable file plink.


View 2 Replies View Related

OpenSUSE :: Amarok 4.4.2 - How To Input File PATH

Apr 4, 2010

I upgraded my OpenSUSE 11.2 KDE 4.3.5.x to KDE 4.4.2 and am having a couple of issues. Not sure if I am just a bit stupid or impatient figuring them out or what... In Amarok, I used to be able to input or edit the path name under Files (i.e. Browse Local Harddrive for Content). This allowed me to quickly copy and paste a location from Dolphin / Konqueror etc. into and from Amarok for quick access across multiple applications (Especially when sorting out things). Somehow this is either missing (Not possible anymore) or I am to impatient or stupid figuring this out.

View 2 Replies View Related

OpenSUSE :: Path Not Working When Executing From Script?

Jul 26, 2010

I use tcsh. When I execute by hand a command that is in my path...located in say "~/bin/myscript"....the command executes without an issue. I don't need to use the absolute path "~/bin/myscript", I can simply type the command "myscript" since the path "~/bin" is in my .tcshrc file. When I execute the same command from a script, I get a "command not found" error. A similar issue is when I use the absolute command, but a library necessary the programs' execution is defined within my .tcshrc file. I'll get a library not found error.

View 5 Replies View Related

OpenSUSE :: 11.4 - Unable To Setup Core Path For SMB

Jun 11, 2011

I want to set up a PDC on my computer using Samba without LDAP, etc. The only thing I need is to share folders between the two ridiculous computers here. I got a 11.3 laptop and this 11.4 desktop. This is the /var/log/samba/log.smbd extract:

[2011/06/11 08:29:35, 0] lib/fault.c:250(dump_core_setup)
Unable to setup corepath for smbd: Permission denied
[2011/06/11 08:29:35, 0] smbd/server.c:1134(main)
smbd version 3.5.7-1.17.1-2505-SUSE-SL11.4-x86_64 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/06/11 08:29:35.951937, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/06/11 08:29:35.954910, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/06/11 08:29:35.955027, 0] smbd/server.c:1234(main)
ERROR: smbd can not open secrets.tdb

This is the /var/log/samba/log.nmbd extract:
[2011/06/11 08:27:48.682275, 0] nmbd/nmbd_become_lmb.c:395(become_local_master_stage2)
Samba name server ANTARES is now a local master browser for workgroup XXXXXXXX.WORLD on subnet
[2011/06/11 08:28:08.700572, 0] nmbd/nmbd_serverlistdb.c:343(write_browse_list)
write_browse_list: Can't open file /var/lib/samba/browse.dat.. Error was Permission denied
I have modified in Yast the User Authentication Source to smbpasswd and specified the correct path to the file...

This is the /etc/samba/smb.conf extract:
passdb backend = smbpasswd:/XXXXXXXX/smbpasswdfile
I erased all the samba related configuration files, uninstalled samba cli/ser samba-yast cli/ser and reinstalled, reconfigured and still have same issue. It worked very well with 11.1... (I clean installed 11.4 yesterday). I thought take sources from samba, compile and then see if it works...

View 4 Replies View Related

Copyrights 2005-15, All rights reserved