OpenSUSE Network :: Traceroute - Permission Denied For Root

Apr 8, 2011

As root I get the following result: ngssuse:~ # traceroute -nI 10.200.123.45

Note: the -i and -I options were exchangedfor compability with LBL traceroute Use -I for ICMP, and -i <ifname> to specify the interface name unable to create ICMP send socket: Permission denied. Is this a bug?

View 5 Replies


ADVERTISEMENT

OpenSUSE :: Traceroute Broken In 11.4 - Unable To Create ICMP Send Socket: Permission Denied?

Apr 5, 2011

Code: # traceroute -I 69.12.32.2 Note: the -i and -I options were exchangedfor compability with LBL traceroute Use -I for ICMP, and -i <ifname> to specify the interface name unable to create ICMP send socket: Permission denied Note that the command was done as root. This worked in 11.3.

And yes, it works without the "-I". But it should work with the "-I". One shouldn't have to boot into Windows, just to run "tracert" there.

View 9 Replies View Related

OpenSUSE Network :: NFS Permission Denied When Trying To Write?

Jun 29, 2010

i have client and server PCs, both with openSuse 11.2.

on the server side, i have mounted HD partition to /vmshare dir. relevant line in /etc/fstab reads:

Code:
/dev/disk/by-id/ata-WDC_WD3200AAJS-07B4A0_WD-WCAT16493946-part2 /vmshare reiserfs user,acl 1 2
i want to export /vmshare dir via nfs. i have configured it through yast and resulting line in /etc/exports reads:
Code:
/vmshare *(rw,root_squash,sync,no_subtree_check,crossmnt)
the permissions for this directory is drwxrwxr-x root vmshare.

i can successfully mount the exported dir on client side, i can move between directories and list contents, but i can't write into it (not even as a root). on the server side, i can write to the directory only as root. the vmshare group is created on both machines with same gid as well as all users have same uids. firewalls are down.y.

View 3 Replies View Related

OpenSUSE Network :: OpenVPN - Permission Denied For Vars Command

Mar 30, 2010

I did some reading on Openvpn and am following some instructions I found @ Install & Configure OpenVPN SSL VPN in SUSE & openSUSE Linux | SUSE & openSUSE

I keep getting the same error message when I run the . ./vars command
"NOTE: If you run ./clean-all, I will be doing a rm -rf on /etc/openvpn/easy-rsa/2.0/keys"

But when I run ../vars I get
"Bash: ../vars: Permission denied"

View 1 Replies View Related

General :: Permission Denied As The Root

Mar 23, 2011

The root user of Linux doesn't have permission to read/write a regular file, unless all users have permission to read/write this file, like below:

drwxrwsrwx ....... file_name

However the owner of the file can still read/write this file.

AND:

0) not the problem of execution, just read/write
1) not the problem of device because regular user can read/write it.
2) the result of command id:

uid=0(root) gid=0(root) groups=0(root)

so I don't think it's the problem of group.

View 2 Replies View Related

General :: Permission Denied While Copying Files With Root

May 8, 2011

How is it possible that I get perm denied when I'm copying files in console.

View 1 Replies View Related

Ubuntu Servers :: Root Permission Denied Errors When Using Apt

May 6, 2010

Just had a new VPS installed running Ubuntu Server 8.04 Getting some errors when I connect to the server and try to use apt.. only trying to install nano and after messing around I've managed to get the error to change.. but still can't get any further.

error

Code:

# sudo apt-get install nano
Reading package lists... Done
Building dependency tree
Reading state information... Done

[code]....

View 4 Replies View Related

Ubuntu Security :: Permission Denied When Trying To Run ./setup As Root

Sep 28, 2010

I am trying to install COMSOL 4a in Ubuntu 10.04 and when I try to run ./setup and I am already connected as root the command line gives me a permission denied error.

View 6 Replies View Related

General :: Opening Root Folder - Get Permission Denied

Nov 8, 2010

Hi I am a complete newbie I have installed ubuntu 10.04 I have sorted problem with Mobile broadband, but having problems opening root folder I get a permission denied not the owner I have admin privalage as far as I am aware I was following something I read using terminal but kept getting a message saying something about the root I opened the file manager found root folder but still denied access. how I get access same is also true for lost&found folder but have to admit i dont know what that folder is.

View 7 Replies View Related

General :: Cannot Copy File Even As Root (Permission Denied)

Jan 2, 2011

I am attempting to make a backup copy of a file, but every time I try to copy the file, I get a "permission denied error -- even when running as root. The file is on a volume mounted as /media/Data . No problems reading/writing other files on the volume.

Here is the info on the file:
-rw-------. 1 root MailServer.img

I've tried chown but get the permission denied as well. This is a virtual machine image that runs fine, but even with the VM completely shut down, I get the same error.

View 10 Replies View Related

General :: Logged In My System As Root - Run A Simple Shell Script - Permission Denied ?

Jan 27, 2011

I logged in my system as root. but when i run a simple shell script i got an error like . Permission Denied. why m getting this error.

View 3 Replies View Related

General :: Cannot Open Network Interfaces - Permission Denied

Dec 11, 2010

I can't open etc/network/interfaces file comes some permission denied. What can I do?

View 2 Replies View Related

General :: Permission Denied On Smbmount Ed Network Drives?

Mar 23, 2010

I can not write to any directories mounted.I have included the below info as my issue outgrew nmy original thread here:

debian:~# ls -l /mnt/net/flac/
total 0
drwxr-xr-x+ 16 999 root 0 2010-03-20 10:19 gd_1976_project_7

[code]....

View 15 Replies View Related

Installation :: Permission Denied \ Opened Konsole, Entered Su And Entered Root Password?

Aug 19, 2010

I'm running PCLinuxOS with no other OS installed. Thought I'd have a go at chainloading. just for interests sake.So, I opened Konsole, entered su and entered my root password. The command line turned red so, I imagined all was well. But when I then keyed in '/boot/grub/.menu.lst' I was refused access.

View 10 Replies View Related

General :: Directory Access : Permission Denied "In Root"?

May 14, 2010

When login through root on HP-tru Unix server, I am trying to access a directory, it is saying "Permission Denied".. Also, an sh file is also not able to execute through same root access..I have checked the permission of the directory as well as for sh file through ls-ltr.. It is also fine.. Root System rwx-rwx-rwx--What could be the possible cause, and how to correct it..

View 1 Replies View Related

Ubuntu :: How To Login As Root User Says "permission Denied"?

May 1, 2010

i was trying to execute the following on Kubuntu.

Code:
echo 0 > /proc/sys/vm/vdso_enabled

But it says "permission denied". Probably I need root user rights. How to get it in Kubuntu?

View 3 Replies View Related

Ubuntu :: Root@ubuntu:~# Ls -la Ls - Cannot Access .gvfs - Permission Denied

Jan 2, 2011

root@ubuntu:~# ls -la

ls: cannot access .gvfs: Permission denied

I understand that with a desktop active, shelled as root, I could get this message. Does this kind of behavior effect applications like MYSQL, PHP, Apache etc?

View 1 Replies View Related

OpenSUSE :: Freeradius 'permission Denied' / Sort It?

Apr 26, 2010

I recently installed freeradius using Yast,but wehen I tried to run it in a debug mode code...

View 4 Replies View Related

OpenSUSE :: Identify Ps Output - Permission Denied

Jan 4, 2011

I noticed when running "ps -ef" that there are a bunch of processes listed with brackets. ie "[process]". Some of them appear to be daemons and others look more like kernel modules? I haven't found a program directly associated with them and was hoping somebody could clarify this for me?

Also, if I run a search of the file system with sudo or as root, there is a directory in my home that returns a permission denied. I understand permissions but shouldn't operations as root be able to do/access anything on the system?

View 4 Replies View Related

OpenSUSE :: Cron Job 'permission Denied' / Sort It?

Jan 5, 2011

After an upgrade to opensuse 11.3 from 11.2 it turns out that cron uses pam for authentication. Now I have one user 'mythtv' which does not have a login and is not part of the 'users' group. This user is being denied access (permission denied messages in /var/log/messages from crond).

Now, I have been experimenting with the /etc/pam.d/crond config file. I wanted to use the pam_listfile module to grant access to this specific user without authentication. That however didn't work and I have now narrowed down the problem even more.

When I use this for my crond file

Code...

What could be the problem here?

View 3 Replies View Related

OpenSUSE :: Ssh Permission Denied \ Connect To Web Host Via Ssh?

Aug 15, 2011

I am trying to connect to my web host via ssh. I can do this on Windows using Putty without issue. However, if I run this on Linux, I receive a "permission denied" when I am prompted for my login and password. It's obviously making some type of connection, otherwise it wouldn't be prompting me for authentication.I initially thought this was a firewall issue.I opened up port 22 and I even tried disabling the firewall altogether.However, I still received this error.

View 9 Replies View Related

OpenSUSE Install :: Permission Denied In SLES 11?

Mar 25, 2011

I have modified /etc/sudoers using visudo command to give the user "runner" to give all access without password.capture of sudoers file

# User privilege specification
root ALL=(ALL) NOPASSWD: ALL
runner ALL=(ALL) NOPASSWD: ALL

But still the "runner" is getting permission denied error when trying to open files with "(-rw-------)" permission in/shutdown

View 2 Replies View Related

Slackware :: Getting "permission Denied" Both As Root

Sep 14, 2010

In previous Slackware libsane releases, my scanner was not supported. In 13.1 the support is there:

root@gandalf:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:3304 Hewlett-Packard DeskJet 990c
Bus 002 Device 004: ID 04a7:0229 Visioneer OneTouch 7100

[Code]....

Why am I suddenly getting "permission denied" both as root, and as the normal user (yes added to 'scanner' group)? What changed from the full DVD installation (using 2.6.33.4-generic and initrd) after added the the patches? I've been googling for months trying different "permission fixes" and fiddling with udev rules with no luck. So there is something I don't understand going on here.

View 8 Replies View Related

OpenSUSE :: VirtualBox Used To Work / Now It Fails With Permission Denied

Feb 4, 2010

I am trying to use VirtualBox which worked just a week ago (I haven't changed anything with it) but now it fails. When I try to start it (from the command line) with /usr/bin/VirtualBox, as a regular user, it fails.

View 6 Replies View Related

OpenSUSE :: 11.3 Minicom Permission Denied With Usb Serial Adapter?

Jul 21, 2010

I have a usb serial adapter and was happily using minicom with it under openSUSE 11.2. I've upgraded to openSUSE 11.3 and I can only use minicom with this serial adapter as root. I had previously had problems writing to /var/lock under openSUSE 11.2 which I worked around by changing the minicom config to use /tmp as its lock file location.

Unfortunately my laptop doesn't have a built in serial port so I can't tell if its a general problem or something specific to the /dev/ttyUSB0 device. This is the output I get when I run minicom with my regular user account. I get the same output whether the lock file location is set to /tmp or /var/lock

Code:minicom usb0 Device /dev/ttyUSB0 lock failed: Permission denied. Before I started tinkering my user belonged to the following groups groups=16(dialout),33(video),100(users) I've since added 5(tty),14(uucp),21(console) but still no joy.

View 7 Replies View Related

OpenSUSE :: Crontab For Amanda Enterprise Gets - Permission Denied ?

Sep 3, 2010

I'm configuring Amanda Enterprise on an OpenSuSE 11.3 system, and everything but the scheduled backups are running. I decided to try and fix it tonight, but I'm pretty fed up by now.

So here's the background:

The application creates an account on the box named "amandabackup" and adds it to the 'video' and 'disk' groups.

It generates cron jobs in /etc/zmanda/zmc_aee/crontab, which is configured as the location of the crontab file for the amandabackup user.

The crontab is owned by amandabackup:disk with a mask of 644.

So I played around with it a little bit; I ran the backup task manually as amandabackup, which worked fine.

I then tried adding the following to the crontab:

And touched amandacron.log, then made sure it was owned by amandabackup with a mask of 644 (i also tried /etc/amanda/amandacron.log, which is a directory the account stores backup session configs in, so I know it can write to it properly). The file is never updated. I tried adding amandabackup to different groups (it's currently been added to the "Users" group), with no success. I tried a symlink to the crontab file in /etc/cron.d to see if that would make a difference, but it didn't.

At this point, I went online and tried some more stuff I found:

I checked /var/log/mail/amandabackup - everything *but* cron jobs were reporting to it.

I verified cron was running with both "ps -ef | grep cron" and "rccron status"

I ensured /var/spool/cron/tabs/amandabackup existed, showed the proper entries, and was set to 644. (this one's the important bit)I checked /var/log/messages, and every minute on the dot I see: <timestamp> /usr/sbin/cron[PID]: Permission Denied

I ensured there was no /etc/cron.allow, and that /etc/cron.deny did not contain amandabackup.

I tried making an /etc/cron.allow, adding amandabackup, and restarting the cron daemon, but this did nothing.

I don't think I've forgotten anything, but my attempts have been getting progressively more feverish, so I'm not positive. Is there some annoying YAST cron panel I'm not seeing? Is there some way of getting more verbose logging out of the cron daemon than just "permission denied"? Is there some draconian rule about crontabs only working based on some otherwise-arbitrary account setting?

View 1 Replies View Related

OpenSUSE :: HAL - Permission Denied To Automount External USB Storage

Nov 2, 2010

11.3 in use with KDE. When I plug in an USB stick or my HTC phone into the USB connector the device is recognised but can't be opened in dolphin. This is the error message:

Code:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy:
org.freedesktop.hal.storage.mount-removable
auth_admin_keep_always <-- (action, result)
but the device is shown in dolphin as a removable device and

Code:
# lsusb
Bus 001 Device 005: ID 0bb4:0ff9 High Tech Computer Corp.

View 9 Replies View Related

OpenSUSE Install :: Permission To Access Denied During Update In 11.2

Feb 18, 2011

After some update every time I run update from the Yast or zypper I frequently get errors like the following (with zypper):

Code:
Permission to access 'http://download.opensuse.org/update/11.2/rpm/x86_64/unscd-0.43_0.45-2.1_0.2.1.x86_64.delta.rpm' denied.

Abort, retry, ignore? [a/r/i/?] (a):

If I type <r> then download continues. Is there any way to fix that or at least make it retry automatically?

View 3 Replies View Related

OpenSUSE Install :: Permission Denied On Windows Partition?

Aug 1, 2011

I'm running openSUSE 11.4 (gnome) and I'm trying to transfer files to my windows partition and it says that I don't have the permission to do so. How do I gain access to it?

[URL]

View 2 Replies View Related

OpenSUSE :: Unable To Setup Corepath For Smbd: Permission Denied

Jun 6, 2011

I installed samba em my opensusse and i have fallows error: Unable to setup corepath for smbd: Permission denied

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved