OpenSUSE Network :: Networkmanager (eth0 And Wlan0) And Ifup Wifi Not Working After Monster Update?
Jul 13, 2011
I've had 11.4/KDE working pretty well on dual boot Asus G73SW for a few weeks now. Only issues were the FN-* functions that control keyboard lights and whatnot but no biggie since the essential worked.The last couple of days the update notification was indicating 1,201 updates to be made. Yeah it seemed extreme but I googled around and checked the forums and there was nothing related. I figured I might be missing some packages since I installed from the live KDE CD (still 1202 updates!!!???). So I updated. Big mistake!!!!! Ever since NetworkManager cannot connect to the internet, be it wired or wireless.
Initially it could not even see my home network but it picked it up after I removed the plasmoid from the panel and reinstalled it. However it doesn't respond when I click the network icon and still no connection.I managed to get eth0 working with ifup but not wifi. The last part of network manager log file is quoted below. I can send the whole thing to whoever is interested. I can't make sense of it but maybe someone on the forums can.
Code:
Jul 13 11:09:08 linux-yy10 NetworkManager[1649]: <info> NetworkManager (version 0.8.9997) is starting...
[code]....
View 9 Replies
ADVERTISEMENT
Mar 24, 2011
I had to uninstall a proprietary ATI driver because it wrecked my X server. Apparently I removed the wrong package, because now the X server won't even start, even with the "nomodeset" flag.
QUESTION 1.How can I configure WiFi on the command line with NetworkManager or ifup, whichever is easier?
QUESTION 2.Which packages do I need to download to restore the X server?
View 9 Replies
View Related
Dec 24, 2010
I'm new to this forum site and I was wondering how can I bridge a network between the eth0 and wlan0 connections?my eth0 NIC is a RealTek RTL8111B 10/100/1000 Ethernet Card (OnBoard) and my wlan0 NIC is a RealTek RTL8187B 802.11b/g WiFi USB Adapter Card.Are there any utilities, such as bridge-utils that I can use, except for Firestarter since Firestarter states that the eth0 connection is not established, or do I right-click on the network icon and select Edit Connections and go to Auto eth0 and under the IPv4 Address setting and select Shared to other computers and run a live connection there?The main reason is that I need an Internet connection for my Xbox 360, which is connected to my Linksys WRT54G 802.11b/g Wireless Router, that has DD-WRT firmware installed and 4 WiFi hotspots for any wireless device, such as my PSP, DS, DS Lite, Wii, Laptop(s), my brother's PC (needs a WiFi card), and my dad's PC (needs either a WiFi card or an Internet connection from my brother's computer to my dad's PC)
Here are my Computer Specs:
ECS nForce6m-a Motherboard
2GB DDR-800 PC6400 Memory
[code]....
View 6 Replies
View Related
May 20, 2009
When I try to bring up my wi-fi PCI card (ifup wlan0 or ifconfig wlan0 up) my whole PC just hangs until I power it off.
I believe I have the right drivers, but cannot see what I am doing wrong.
I'd really prefer not to go down the ndiswrapper route.
Firstly, I can see the PCI card and the driver it is using :
Code:
[J@gx260-f10 ~]$ lspci -k
...
...
01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
[Code]....
the PC just hangs for ever. No mouse movement, ctrl-alt-del, nothing.
I have downloaded a Linux driver from Realtek but it will not compile. I have the latest kernel-devel, headers, and gcc. I can post compiler errors if anybody would like. They're all apparently to do with missing parameters.
View 6 Replies
View Related
Jan 8, 2010
currently on an acer aspire 5532, and using mozilla and google chrome. webpages take about 10-12 seconds to load using the ethernet, wifi its about 2-3 seconds. using eth0 loading videos - broadcast yourself. in chrome, will sit at "resolving host" for about 10 seconds before bringing up the page. you would think eth0 is faster than wlan0, but for browsing the web its slower. i tested the speeds at speedtest.net - the global broadband speed test and both wlan0 and eth0 get the max speed my internet provides.i never downloaded drivers for the ethernet card or wifi, they worked so i didn't try to mess with them. but perhaps that is my problem?
code:
# lspci
00:00.0 host bridge: advanced micro devices [amd] rs780 host bridge
[code]....
View 6 Replies
View Related
Feb 27, 2011
I have installed Open SUSE in my DELL server which has 2 broadcom NIC cards, it showing both the NIC cards in Network configuration in YAST ,but it showing as not configured and not connected . Kernel device eth0,wlan0 are not present. In device manager also 2 Broadcom nic cards are detected.
View 4 Replies
View Related
Sep 29, 2010
After spending quite some time on this, I have narrowed it down to:
Adapter works OK with NetworkManager
Adapter works OK with ifup if I run iwconfig after ifup has finished
It eppears to be linked to another thread Probl me de r seau wifi / Network manager in that dhcp needs to be running. (So it may be a 'feature' of RTL819 adaptors) So I've finally worked out that I need to start dhcp first.
[Code]...
View 2 Replies
View Related
Mar 13, 2011
I have just installed 11.4 KDE (having used 11.3 for a while). I was able to use YAST in 11.3 to switch from network manager, to using 'traditional', to connect to wireless network without problems. Since installing (fresh install) 11.4, only network manager seems to work without issue;
using traditional never sets up the wireless connection - or should i say appears not to as no apps will connect (as they do fine using the network manager connection). using 'ifstatus wlan0', seems to suggest there is no configuration file when using the 'traditional' gui. Has any one had similar problems
View 9 Replies
View Related
Mar 3, 2010
I have my ubuntu box hard wired into my network. It all works fine, until I reboot my ubuntu box. After reboot, it can no longer see the network. I have it set up with a static ip. Not sure that I set it up completely correctly but it works fine...when working.. To fix the problem, I enter terminal: ifup eth0 That fixes all know problems until next reboot. What do I need to do so that it will remember settings and automatically be hooked into the network at power up?
View 3 Replies
View Related
Mar 29, 2010
I have searched around a bit for a knetwork manager issue I am having on my opensuse 11.2 32 bit install. My wireless card is an 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) I am currently using the Broadcom wl driver
I am on the Internet with this machine as I am typing using the older "ifup" method. I am having great difficulty connecting to the Internet when I use knetwork manger though. The strange part is when I am connected to my router with knetwork manager, I can log into my Router, but I can not get to any web-page/ping any outside address.
so far the best (I was able to locate) advice I was able to get is located in this post. < Broadcom wireless, partchy internet - openSUSE Forums > following a posted how to to disable IPV6 (I suspect this may be the issue??), I was unable to locate modprobe.conf, or modprobe.conf.local, even after I updated via updatdb. I gave a shot at entering in "disable_ipv6=1" into "menu.lst". However, this did not solve my issue with knetwork manager. If my network information is needed when I am "connected" utilizing knetwork manager
View 9 Replies
View Related
Nov 30, 2010
Installed a TP-Link TG-3269 Gigabit card in a machine running OS 11.3 32 bit, when I go into Yast, Network Devices, Network to try configuring the card I get this errormsg: Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. Couldn't find any mention of the card in dmesg's output, (though the 8139 onboard card is in there) there is some stuff about pci host bridge but I don't know whether they would be relevant or not
The chip on the card says it's rtl8169sc but lspci lists it as being 00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8369 (rev 10) Done some googling and there don't seem be any drivers for a Realtek 8639 and it returns no matches from a search on realtek's site, but there is a driver there for rtl8169sc chips, which I downloaded and installed, no errors when installing it Even after a reboot I still get the same error in Yast's Network Settings screen, lspci still lists it as 8369 and the device isn't listed at all if I run ifconfig
View 9 Replies
View Related
Dec 23, 2010
I am in the process of settign up a home server under FC14. The installation recognized both NICs, one as Intel Gigabit and the other as a Realtek Semiconductor as it should be. But when trying to start eth0 (Realtek) I get the following error message:
[root@theraugafamily network-scripts]# ifup eth0
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1
** (process:2296): WARNING **: _nm_object_get_property: Error getting 'State' for /org/freedesktop/NetworkManager/ActiveConnection/1: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
state: unknown Error: Connection activation failed. Some more ifo the this NIC as it is of special type.It is a Viking PCI ADSL2+ Modem Card. I am quoting form the description "Being a gully integrated card, no external plug packs are required and cabling is simplified to just an ADSL line connection. The need to purchase an extra ethernet card is also eliminated, as yjis features is build into the card. The onboard Ethernet controller (RTL8139) makes the modem appear to the OS as a standard network card. Thus the Viking can be used with almost any modern O/S without the need for special drivers. This includes Windows, Linux, Solaris, xBSD, etc.." setting ACPI=off in GRUB.conf does not fix the issue
View 2 Replies
View Related
May 6, 2011
So I have been having this problem with my WiFi which isn't working. I am currently running on the following:
uname -a
Code:
Linux mmartin6510 2.6.31.14-0.8-desktop #1 SMP PREEMPT 2011-04-06 18:09:24 +0200 i686 i686 i386 GNU/Linux
I am also using gnome-NetworkManager. If I left-click on the NetworkManager icon down on the taskbar near the clock it shows "Wired Networks" with eth0 connected, and "Wireless Networks" is blank under the heading, last week I believe it said something like "device unavailable" or something like that.
Network Details:
iwconfig
Code:
lo no wireless extensions.
eth0 no wireless extensions.
[Code]....
I was curious about when the last time I was able to successfully use my wifi so I checked to see in NetworkManger and it just so happend to be that I was on a business trip in Atlanta on a different network then am usually connected to. Don't know if that has to do with anything but I thought it was worth mentioning.
Also, I thought it may have something to do with assigning an IP address static-or-auto but I am not too familiar with NetworkManager to check that.
View 9 Replies
View Related
Jan 18, 2016
I am very new to linux.I have a network camera which only has an Ethernet port but no WiFi. Sadly no Ethernet port is available close to the camera.
Therefore I now bought a raspberry pi and installed raspbian to create a bridge into the wireless network, for connecting the camera to the internet.I now played around with the interface- and bridge configuration but I have problems with it.This is how my interfaces file looks like:
(The WiFi is secured with WPA2 Enterprise)
Code: Select all# interfaces(5) file used by ifup(8) and ifdown(8)
# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d
[code]....
The WiFi is connection works fine and I am in the internet using the WiFi.But I am wondering about eth0. The network parameters I specified are not the same as the parameters ifconfig tells me.Ip, Broadcast, Mask, nothing is as specified.It would be nice to give the camera a static IP that I can access it always with the same IP from the RaspberryPi.The Raspberry Pi itself gets always a new IP from the WiFi network. How do I get the camera into the internet using the existing connection of the Pi?
View 6 Replies
View Related
Oct 31, 2010
I just installed Fedora 13 on a new Dell XPS desktop and some of the networking files are not created/missing. The computer has Broadcom Gigabit wired card and Asus PCE-N13 wireless card. When I type lspci, I see that Network conroller: RaLink RT2860 and Ethernet controller: Broadcom BCM57780 Gigabit Ethernet. So, somehow they are being detected by the OS, but I am not sure if the drivers are installed or why some of the network files are missng.
View 1 Replies
View Related
Apr 20, 2011
In previous openSUSE versions I was using WICD as network manager. I upgraded my openSUSE to 11.4 and resolved give a try to the NetworkManager. I can get network connection, but the dhcp doesn't update the /etc/resolv.conf, so I can't navigate because the dns isnt set.
I tried to reinstall all related packages (dhcp, dns and networkmanager) without success.
If I run dhcpcd the resolv.conf get updated, but dhclient doesn't do the same. It seems that's a dhclient script issues, but I don't know how to test.
View 9 Replies
View Related
Apr 11, 2011
On fresh install of 11.4 everything worked fine, but after some updates networkmanager stopped working properly on my netbook (intel atom n270 based).When I log in, network manager shows that networking is disabled and I can't connect. Checking/unchecking the checkbox does nothing. All settings in Yast are OK.To make it work, run "/etc/init.d/network restart" and then plug in the wire OR (in case of wireless connection) I restart network from console, unchecck and check the checkbox in networkmanager and only then it starts to work as it should.
View 9 Replies
View Related
Aug 5, 2010
I've run into a situation where knetworkmanager tells me networking is disabled. If I switch to the ifup method in Yast then I can get online but when I switch back to user controlled knetworkmanager tells me that networking is disabled.I've actually had this happen twice.The first time I somehow managed to get it working again (I thought it was by right clicking on the icon in the system tray). This time I don't see the same option.Has anybody got any suggestions on how to get knetworkmanager working again.
View 9 Replies
View Related
Dec 1, 2009
I tried to update my fully-working 64-bit 11.1 system to 11.2. I used the network install and chose the Update option. It took a few hours so I didn't sit through the entire installation but when I returned the 11.2 login screen was displayed. Having logged in, however, I found that I couldn't access the network.The boot log showed that network had failed to start. "ifconfig" lists only the "lo" interface. "ifstatus eth0" returns "Interface eth0 is not available"
Network Settings in YaST lists 2 entries in the Overview tab. The first entry has Name:"NetXtreme BCM5755 Gigabit Ethernet PCI Express" and IP Address: "Not configured".The detail pane for this entry shows "NetXtreme BCM5755 Gigabit Ethernet PCI Express (Not connected) BusID:0000:3f00.0 Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details". The Edit and Delete buttons are both disabled for this entry.
The second entry has exactly the same name as the first with the IP Address listed as "DHCP4". I assume this was the entry that was carried over from the 11.1 system. The detail pane for this entry shows "NetXtreme BCM5755 Gigabit Ethernet PCI Express (No hwinfo) Device Name: eth0. Started automatically at boot. IP address assigned using DHCP4". The Edit and Delete buttons are both enabled for this entry.lspci reports "3f:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755 Gigabit Ethernet PCI Express (rev 02)"
lsmod lists only "edd", "loop", "sr_mod", "sg", "cdrom" and "dm_mod".
The files in /etc/sysconfig/network/ are "if-down.d/", "if-up.d/", "providers/", "scripts/", "config", "dhcp", "ifcfg-eth0", "ifcfg-lo", "ifcfg.template", "ifroute-lo",
[code]....
View 8 Replies
View Related
Jul 22, 2011
I managed to kill KNetworkManager today and I'm not sure what I did. This is a netbook running openSUSE 11.4 with all updates applied and KDE 3.5 (from the openSUSE repository). Normally, I use knetworkmanager to connect to the Internet. Everything was working fine this morning and today I decided to apply whole disk encryption (using cryptsetup and luks) to it.
So, I backed up the files, encrypted the partitions, made some adjustments to /etc/fstab and /boot/grub/menu.lst, and copied the files back. Everything is working fine, except for knetworkmanager. When it goes to connect, it starts off with the "gray Earth" (to represent no connection) and then it switches to the "connecting" icon for a fraction of a second, and then it's back to the "gray Earth". Looking at the output of iwconfig, it hasn't connected to the router at all (the essid is blank).
The connection works fine using ifup. I tried using cnetworkmanager (the console version) and it spits out errors like this:
Code:
View 9 Replies
View Related
May 27, 2010
How do you mannually set up a network using Yast/ifup? I'm trying to get my wireless running on a Broadcom 1390 WLAN. I've gone through the stickies in the wireless forum (this is my first stab at Linux) and have gotten the drivers installed and the internet working (albeit intermittently) using Knetwork manager. It seems that some folks that have had the same issue did not have problems setting the network up manually with Yast & ifup. I've disabled network manager in Yast, and I went through man ifup. It seems I need a "pre-configured interface," but I don't know how to make that happen.
View 9 Replies
View Related
Aug 19, 2010
I having a problem with my network. I'm trying to assign an IP alias of eth0:1 to eth0. If I use ifup eth0:1 is fails and corrupts the network. Making the network useless. But if I just enter 'ifconfig eth0:1 10.1.1.51', it work fine? My scripts look like these:
Code:
:network-scripts; cat ifcfg-eth0
NAME="System eth0"
DEVICE=eth0
ONBOOT=yes
[Code].....
View 2 Replies
View Related
Jun 9, 2011
I'm having a weird problem, eth0 does not start neither on bootup nor ifup...not even issuing /etc/init.d/networking restart...i will show you some info just to check
[Code]...
View 6 Replies
View Related
Jun 28, 2011
Suddenly my wireless card isn't coming up automatically.The following sequence fixes it:
Code:
ifconfig eth1-eth0 up
killall NetworkManager
[code]....
View 2 Replies
View Related
Dec 15, 2010
on my dell latitude e6510 opensuse 11.3 kde 4.4.4 with tri boot windows 7 and two suse if boot with windows7 and I connect to internet by wired eth0 and then reboot in opensuse, networkmanager doesn't find my networkboard eth0 but only wireless, I have to reboot, enter in bios setup, exit, reboot, and then opensuse find my eth0, I tried with gnome too but is the same
View 8 Replies
View Related
Apr 19, 2010
is there any difference between ifup and ifplug?or they just do the thing.
View 4 Replies
View Related
Apr 22, 2010
In Network Settings in OpenSuse 11.1 while using "Traditional Method with ifup" I am able to set up a box as a server and connect via http over the net BUT Firefox cannot browse. If I switch to "User Controlled with NetworkManager" I can run Firefox but my server is not contactable. How do I do both?
View 4 Replies
View Related
Apr 22, 2010
WiFi worked PERFECT in 9.10 after
Code:
Sudo apt-get update
apt-get upgrade
But that only worked when I put in my eth0 cable to get the Updates. Now I upgraded to 10.04 LTS and it isn't working- eth0/wifi. So Now what do I do if i can't even get the updates in Terminal?
View 2 Replies
View Related
Feb 19, 2011
I just installed OpenSuSE 11.3 on an old IBM T20 I had kicking around and I'm using a Proxim Wireless PCMCIA Card (Atheros AR5001X). Since this laptop does not have a DVD drive I installed the system using the Netboot CD and have the SuSE 11.3 ISO on an NFS/SAMBA file server. The issues appeared after the first reboot, the adapter no longer worked. I resorted to using the wired interface to finish the install.
Once the system was up followed the trouble shooting steps outlined in various places and found the ESSID is not being picked up by the ifup scripts. Not sure if it matters but I have ESSID broadcasts turned off on all my WAPs.
The ESSID is in ifcfg-wlan0. To get wireless working I have to manually issue iwconfig wlan0 essid "xxxx"..
Both networkmanager and ifup fail..
View 9 Replies
View Related
Sep 10, 2011
I recently installed openSUSE 11.4 and the wi - fi conection doesn't work, but with Ubuntu worked without problem. What can I do to get wi-fi connection working on this distribution again?
View 9 Replies
View Related
