OpenSUSE Network :: Network - Browsing The Internet With Domain Names Does Not Work

Jun 25, 2010

In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'

Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.

View 9 Replies


ADVERTISEMENT

OpenSUSE Network :: Software Manager Not Resolving Domain Names / Sort It?

Mar 11, 2011

I updated to 11.4 today and software manager is having trouble resolving host names. below is the exact error through software manager

Download (curl) error for 'http://download.opensuse.org/distribution/11.4/repo/non-oss/repodata/repomd.xml':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'

here are the steps that i have taken already to resolve and troubleshoot the issue.
i can ping Google.
i can browse the Internet
i can browser the repo Index of / through my browser.
i have insured that ipv6 is disabled through network configuration through yast.

View 3 Replies View Related

OpenSUSE Network :: No Internet Except For Web Browsing / What Went Wrong With It?

Jan 18, 2011

I'm hoping someone might be able to suggest what went wrong with my networking, so I can continue using OpenSUSE! I've been running version 11.3 with KDE (64 bit) for a few months now (dual booting with Ubuntu); everything had been working fine until about a week ago - the only issue I had was that some internet-based things seemed a bit slower than in Ubuntu.

Anyway, after the last set of updates I installed (around Jan. 6th; there was a kernel update and a few other things. I'm not sure where to locate the history in YaST) I lost functionality of all internet-based programs, with the exception of Firefox. (I'm using Firefox in openSUSE right now to access this forum, for example.) Although I can browse the web just fine, I can't use Thunderbird to check email, the weather and comics plasma applets don't work, and the system can no longer connect to the software repositories.

I didn't change any settings (to my knowledge), but somehow Internet access is being denied to most of my system!

View 9 Replies View Related

OpenSUSE Network :: Slow Internet Browsing / Make It Fast?

Oct 6, 2010

I'm running 11.2 on a Dell Latitude D630. Everything has been great other than issues with Suspend and hibernate not working correctly. However after about a month of use browsing the web has really slowed down bad. It doesn't seem to matter if it's in Firefox or Chrome either. I am using a wireless connection that is getting the signal at 85-95%. Even though I still tried using a direct cat-5 connection to the router and it was still slow as well. I have the fastest broadband connection my cable offers and my windows boxes on the same network are still flying.

View 2 Replies View Related

OpenSUSE Network :: Network Not Work \ After Install All Packet On Test Internet / Update Was Error?

Jan 5, 2011

I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP

View 8 Replies View Related

General :: Dual Domain Names On A Single Network?

Aug 10, 2010

Here is my scenario and what I want to try and achieve.

I have:

Quote:

Server A = 192.168.1.5 (serverA.home.com)
Server B = 192.168.1.6 (serverB.home.com)

Currently I have serverA.home.com domain name set up using a free dns service online. When I am anywhere in the world I just type the domain name it hits my static ISP IP via the free dns servers online, hits my home router, gets port forwarded to 192.168.1.5 Server A and I am up and running.

Now...

I have bought a second domain for serverB and want it set up like serverA but I am totally baffled on how I can resolve 2 domain names on a single network? I need (somehow) to try and tell the dns servers that when I enter in serverB.home.com it will hit my static ISP IP as above and then hit my home router but then get directed/split to Server B and not to Server A.

Basically all I want to do is name the machines and get traffic resolved to them.

View 2 Replies View Related

OpenSUSE Network :: Error As "This Address Uses A Network Port Which Is Normally Used For Purposes Other Than Web Browsing

Jul 27, 2011

I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -

cups:/usr/share/cups/banners # cups-config --version
1.3.9
cups:/usr/share/cups/banners # cat /proc/version
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100

I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.

2. LINUX - LINUX Printing - OK
LINUX - WINDOWS Printing - OK
WINDOWS - LINUX Printing - NOT OK

While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.

View 3 Replies View Related

OpenSUSE Network :: Cannot Resolve Host Names On Local Network?

Mar 9, 2010

I have a mac and an openSUSE box connected wirelessly to a router. From my mac, if I ping the Linux machine by both ip address and hostname "elmo.local", I get a response. If I ping my mac from the Linux machine using its ip address, I get a response. However, if I ping the mac from the Linux box using its name "kermit.local" - nothing!

This means in order to share files between them via the network, I have to use the ip address rather than name, but I'd rather not. When I had Ubuntu installed instead of openSUSE this all worked fine out of the box, so I'm assuming it's a problem with the setup of openSUSE rather than the router or the mac.

View 4 Replies View Related

OpenSUSE Network :: Domain- Incapable MS Windows Version To Join Suse Domain?

Jun 9, 2010

I was wondering if there is any way to enable an MS Windows client that is otherwise unable of joining a domain to join a domain controlled by (open)SUSE? Is that inability only for joining a Windows based domain but a client that runs XP Home Edition or similar domain- incapable version of Windows could join a domain if it was controlled by Linux?Pardon my newbie style, but answer doesn't have to be detailed step-by-step, just yes/no answer with some pointers would do. I am not new to linux but new to network services... search engines weren't friendly when asked this question at the search bar...

View 2 Replies View Related

OpenSUSE Network :: 11 - Connection With Internet Does Not Work

Feb 13, 2010

I had work well with opensuse 11 and the internet also work well but when I turn off my computer and then use the XP and work with it. I find out the connection with the internet doesn't work in the opensuse 11. I made a repair and format to opensuse 11 but without any change the net still doesn't work.

CPU Pentium4
Motherboard Gigabyte intel 945 S-series
Dial up connection
I have no experience with opensuse.

View 4 Replies View Related

CentOS 5 Networking :: DNS Configuration - Local Network And Internet Names

Jan 28, 2009

We are in the process for Integration Network with our Government Network.
Let say that our network are 192.168.0.0/24
And the Government network are 10.0.0.0/8
I want to know if the local network can resolve the internet names in Government Network. I am using Bind for DNS.

View 1 Replies View Related

OpenSUSE Network :: Couldn't Connect To Internet - Dhcp Don't Work

Sep 26, 2010

I have installed openSUSE KDE 11.3 on my notebook. Everything looks great, but I can't connect on internet. It looks like dhcp don't work. Wireless works fine, only auto eth0 don't work.

View 9 Replies View Related

OpenSUSE Network :: 'Looking Up' Sites Takes Several Seconds When Browsing

Feb 28, 2010

I recently installed 11.2 and Firefox takes several seconds to connect to each site.I pinged my machine, the gateway, the DNS servers (by IP address), and other various sites (by domain name), all without delay. But when I browse using Firefox, there's a 3-second delay while "looking up", and finally it connects. Any ideas what's causing this? I'm using Gnome and don't have another browser installed to test.

View 3 Replies View Related

OpenSUSE Network :: Samba Share Browsing Not Working But Then It Does?

May 31, 2010

My samba seems to be mis-configured somehow. I had been using Ubuntu 10.04 and my samba browsing of my samba shares on my HTPC (running XBMCLive) had all been working fine. Then I upgraded to openSuSE 11.2 64bit. Great OS by the way!Ok so I chekced my other PC's running Ubuntu and going to the network folder I see my XBMCLive machine. Double click him and now I see my shares on that PC. So now I know its specific to my SuSE install.

Now on SuSE if I use Dolphin file manager and go to Network -> Samba Shares -> workgroup I dont see anything. And then down the bottom of the window I will see timeout error on workgroup. "workgroup" is the correct workgroup. All the services are running winbind, smbd, nmbd, xinit, swat. Firewall disabled.However when I try the above and I get the timeout error I then go to the address bar in Dolphin where it has smb as the drop down item and in the text field type in the XBMCLive PC ip address and hit enter. Then immediately I can see my shares!!! So it is working but I cant see my shares under Network->Samba Shares->workgroup.I notice in my samba error logs for log.smbd I keep seeing this;smbd_open_once_socket: open_socket_in: Address already in use

View 8 Replies View Related

OpenSUSE Network :: Browsing Secure Sites Is Very Slow

May 21, 2011

I've recently installed openSUSE 11.4 (64 bit) on my system and am experiencing severe performance issues with websites using https (any site using https). Page loads over https take anywhere between 30 seconds to 2 minutes. It's the same issue posted here Secure sites load slow or not at all -- there was no confirmed solution.

- My router/hardware configuration has not changed in a long time and I've run Ubuntu, Arch Linux, and Windows XP on the same machine within the last year and have not had any issues.
- I also have a laptop running Arch Linux (kernel 2.6.38) and this problem does not occur using Firefox 4 or Chrome. To add to the madness this problem occurs while running Firefox 4 inside a Windows 7 guest via virtual box, but NOT while running IE 8 inside the same guest.
- This issue occurs using Firefox 4, Chromium, Opera, Konqueror, and Arora.
- I've disabled ipv6 in Firefox via about:config.
- I've disabled ipv6 in yast and have attempted to use both the "ifup" and "networkmanager" options.
- I am not using a proxy server.
- I've attempted the fix posted in the Ubuntu forums for a similar problem [ubuntu] [SOLVED] Banking Site is very slow.

View 7 Replies View Related

OpenSUSE Network :: Create Network Bridge / Device Hooked Up Via Ethernet Had No Internet Connectivity?

Feb 25, 2011

I'm on opensuse 11.4 (11.3 won't work with my monitor).

My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.

I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward

but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?

View 9 Replies View Related

OpenSUSE Network :: Block Directory Browsing On A LAMP Server?

May 23, 2010

I currently have a LAMP server running with multiple virtual hosts configured. I have one virtual host with a sub directory that contains pdf news letters.do not want the directory browsable and tried putting an index.php file that re-directshe user to the root directory but when I go to the [web address]/[directory name] in any browser I see the contents of the folder listed.

Currently the news letter list is drawn from a database table and displayed as links on a page in the root directory. The links point to the file name in the sub directory. How do I block users from going to that sub directory and seeinge contents of that directory listed? Would I add another <directory> statement in the vhosts.conf file? If so how would I structure that directive?

View 1 Replies View Related

OpenSUSE Network :: Two Network Cards With Different Settings For Internet Access

Feb 9, 2010

I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.

Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.

View 9 Replies View Related

OpenSUSE Network :: Network / DNS - Can't Access Any Internet Resources Or Router

Jul 30, 2010

I'm having a strange problem with my network connection/DNS. I turn computer the on and it recognizes and connects to wireless or wired but I can't access any Internet resources or my router. If I ping the default gateway, I get no response and I get DNS errors from any network services that run at start up. If I stop and start the network daemon then it all works fine until the next time I turn on my laptop. It does this for both wireless and wired connection.

I've tried to edit the network interface information in YaST but it says that configuration is handled by knetworkmanager and I have no idea where that information is accessed. I should point out that it all worked fine until I tried to connect to open WAP at my school and couldn't so I connected to the wired network. Next morning I had this problem when connecting to my home network. My questions are 1. What could be the cause of this error and 2. where does one configure the network interfaces when using knetworkmanager

View 4 Replies View Related

OpenSUSE Network :: Keep WiFi Internet While A PC-to-PC Ethernet Network Is Active?

Jan 31, 2011

I often use an Ethernet cable to connect my computer to another computer for various purposes. But when I do that, I cannot use the internet even though I'm still connected to a WiFi access point. I'm presuming that's because openSUSE is trying to reach the internet through the Ethernet cable, which has precedence over WiFi.Is there a way to enable internet usage via WiFi while I'm connected to another computer over Ethernet?

View 9 Replies View Related

OpenSUSE Network :: No Internet After Install Of 11.4 Network Connections Fine

Mar 12, 2011

I have no Internet Access with Firefox

I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.

I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.

I turned off and disabled the SUSE firewall.

I tried setting Firefox proxy settings to auto and to none, i dont use proxy.

I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).

I am running out of ideas anyone got a clue.

View 9 Replies View Related

OpenSUSE Network :: How To Connect Network Data Card To Run Internet

May 21, 2011

how to connect my network data card to run internet on openSuse..

View 4 Replies View Related

OpenSUSE Network :: Give User Only FTP Access / Browsing Rights For Certain Directory?

Feb 12, 2011

Is it possible to give user only FTP access / browsing rights for certain directory within /srv/www/htdocs and prevent same user to browse all other directories, even user's /home directory on that server?

View 8 Replies View Related

OpenSUSE Network :: Can't Use Network Manager To Connect To Internet

Jan 10, 2010

the thing is that I cant use Network Manager to connect to Internet, because it simply do not connect. The connection, although, awailable throught yast when i choose "traditional method with ifup", so everything is just fine, but if i need to reconnect, i have to reboot. How do I setup a !working! connection through Network Manager, or maybe i do not do something properly.

View 5 Replies View Related

OpenSUSE Network :: Establish Connection To Network But Can't Get To Internet

May 16, 2011

I'm new in SUSE 11.4. My problem is: I'm using Alfa AWUS036H card. It's recognised and I can establish connection to my network, but cant get to Internet. I can't surf the web cos Firefox tell me that connection is timed out. Now I'm confused why I can't surf the web even if I'm connected. Also, I trayed to instal linux drivers for this card folloving Ubuntu "how to" and it just dont work.

View 4 Replies View Related

OpenSUSE Network :: No Network Connection After Firwall Settings Changed / Get It To Work?

Nov 17, 2010

I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.

As a consequence all network services are not working. I can't connect to any other machine nor to the internet.

I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.

Any suggestions how to make it work again? I'm using Suse 11.3.

View 9 Replies View Related

Networking :: (socket Progamming In C) / Decoding The Domain Name When An User In The Local Network Is Logging Onto Internet?

Jun 22, 2009

I am currently working on a project related to packet sniffing which has been implemented using the concept of raw sockets. I am using C language.I am able to decode the following details from the packets received from a local network,like:

source and Destination Mac Address
source and Destination IP Address
source and Destination port no

But I am having trouble in decoding the domain name when an user in the local network is logging onto internet.For eg. if a user in the local network is trying to log on to web using his browser say if he has logged on to url then from the packet I need to get the following details

source Mac Address from which user had logged on
source IP Address from which user had logged on
domain name

View 1 Replies View Related

OpenSUSE Network :: Literally ODD - Network Services Don't Work Every Second Boot?

Sep 14, 2010

I have an OpenSuSE 11.1 in vmWare ESX and every other boot I can't access any running network services (ssh, webmin, qmail, mysql, ...) from outside. I just need to login, reboot and voila - network services are working.I gradually updated to 11.2 and 11.3 by following the wiki with success but this problem remained. So I reverted to snapshot of 11.1 and now I would like to identify and solve the problem here first.I also looked at /var/log/messages /var/log/boot.msg /var/log/lastlog but can't find anything usefull. I will now compare those files from the working and non-working boot but meanwhile someone already has an idea or experience what could be wrong?

View 3 Replies View Related

OpenSUSE Network :: 11.3 - No Network Connectivity - Audio To Work On Skype

Oct 16, 2010

I had Kubuntu 64-bit installed and decided to try OpenSUSE instead as I was having problems getting the audio to work on Skype. After installing OpenSUSE 11.3 (64-bit), I do not have network connectivity (Ethernet or Wireless)? Neither adapter can be detected? I thought the install would be fairly straightforward as Kubuntu 64-bit detected all the hardware.

View 6 Replies View Related

OpenSUSE Network :: Host Names Cannot Be Resolved Except For Ping

May 5, 2010

I'm running openSUSE 11.2 (Linux piura 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 x86_64 x86_64 x86_64 GNU/Linux) and have a network problem. At work, ethernet works fine. When I plug it into my DSL router at home (which works with other computers), I encounter the following behavior: ping can resolve host names, however, traceroute and Firefox and Thunderbird cannot.
It happens for both wired and wireless connections.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved