OpenSUSE Network :: Connecting To The Wireless Network - Linksys WMP600N
Jan 24, 2011
I'm having some trouble connecting to the wireless network here at home. The PC has a Linksys WMP600N wireless network card, which works fine under several versions of Windows. In Opensuse however, I cannot get it to find the network. Even though my laptop is right next to it, which has perfect connection to the network. The router is a Linksys WRT610N.
I've tried running iwconfig and iwlist scan in the terminal, but the scan returns no results and iwconfig indicates it does not have a connection to a network. I've turned off IPv6 as I read this can sometimes cause issues. I've also tried issuing the computer a static IP address, figuring the DHCP might be causing problems, but all to no avail.
I bought the wireless PCI network card WMP600N from Linksys. I tried to connect with my router, but no success. The correct driver is installed(RT2800), the necessary package WPA_supplement is also installed. My providers settings are WPA-PSK with a shared key. Key encryption is TKIP. I can't choose TKIP in the Yast network menu. so i chose passphrase.
the weird thing is that the wifimanager says WEP is on but it's not, at least not in my router and i did not setup WEP to. see picture 6. i had to use manual boot "ifup wlan0" because when i use boot at startup the whole systeem freezes. anyway, when i use ifup wlan0 as root in the konsole, the system also freezes. i have explained it clearly, please take a look a the pictures.
since a few weeks I have a problem connecting to other hosts when I'm using another wireless network, which has a different DNS IP than I have in my network. I have to change /etc/resolv.conf to change the nameserver. Can NetworkManager control the nameserver? If yes, how?
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
I have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.
Code: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter dmesg
I just bought a new USB wireless adapter for my openSUSE 11.3 laptop, a TP-Link TP-WN727N. I can't get the new card to connect to my home wireless network, which is named WRT320N in the screenshot. KDE prompts for the key repeatedly but never connects successfully. Part of the problem might stem from the fact that this laptop now has 2 wireless cards: one build into chipset (PRO/Wireless 3945ABG) and the new USB card. Both show up in knetworkmanager but no clear distinction is made between them visually. Strangely my wireless network shows up twice in knetworkmanager as in the screenshot. Once per wireless card? As my wireless network is N-only I don't see why it would do this.
Just moved over to openSUSE 11.4 (KDE) from Ubuntu, yesterday. However, I'm having some trouble with my wireless connection.
I have a wireless network with a hidden SSID and WPA2-PSK security. I entered all the nescery information into the KDE network manager, but it couldn't find my network. So I ran the usual command:
Code: su -c iwlist wlan0 scanning essid [My SSID]
At which point, the network manager immediately found, and connected to, the network. However, it seems that I have to run this command (as root) each time I log in, before my laptop will connect to the network. The network manager has no problem find the plethora of unsecured networks as well as those that are secure, but broadcast their SSID.
I've spent 29 hours trying to figure this out. And I'm about to blow my brains out. Fresh install 11.2. - 64bit but tried 32 bit and same thing. Dell studio 1734. Broadcom wireless and wired. Installed broadcom drivers (b43) through yast. Wired eth0 works. Wireless eth1 works. Surf with Firefox fine. BUT. Kmail will not connect through wireless. Nor can I access repositories through wireless.
Tried blacklisting B43 in ssb no change. What in the hell is going on? I've searched forum after forum and tried everything and CANNOT make this happen.
I am regular user of windows, but one week ago I installed ubuntu, it was very cool and then I installed opensuse yesterday because I like its kde desktop. But i have problem with wireless, i can see my home wifi, but it doesnt connect. I have same problem in ubuntu, but it was solved when i change passphrase to 40/128 bt from 128 bt, but in opensuse, all i can see is 128 bt or 64/128 ascii. Also I m unable to play mp3 songs in opensuse.
I've just installed openSUSE 11.3 for the first time on a Dell E1505 notebook and am having problems connecting to my home wireless network. Using the Network Manager I've been able to find my home network and connect after entering the network password. After a minute or two the wireless network is still shown as active but their is no connection (websites will not load).
I'm completely new to Linux so I have almost no clue what could be causing this. I have tried connecting the notebook hardwired (Ethernet) to the router and get a perfect connection if that information helps any.
I m nokia mobile to connect to internet in 11.2 configured it all in n/w manager with phone number *99#
APN: XYUX(as given by provider)
Also wrote the dns in resolv.conf but all in vain . it is not connecting neither dialing any number just shows "activating" but with no progress earlier in 11.1 i used kinternet (but i couldn't find it here) is there not any other dialer ? as i ve heard that n/w manager is quite troublesome.
I recently ran into a problem with my at&t vpn connection. I'm hoping someone in this forums may be able to help? It's been working beautifully then one day it just wouldn't connect. I'm wondering if AT&T may have something to do with this...? I have tried reinstalling agnclient-1.0-188.8.131.5200.i386.rpm and agnSUSE10Prep-1.0-2.i386.rpm but nothing seem to work.I'm running Linux 184.108.40.206-0.1-desktop i686System: openSUSE 11.2 (i586)KDE: 4.3.5 (KDE 4.3.5) "release 0"
Recently loaded 11.3 onto a virtual machine, however none of the network settings will allow me to connect to the internet. First time Ive had this happen, other distro's Ive experimented with connected with no problems. I recall seeing a similar topic some time ago (dont remember if it was here or another forum), but at the time, there had been no fix. Anyone know if this has been fixed?
Are there any limitations to connecting to a WPA2 Enterprise network with PEAP authentication on linux? Here at my university, on any major linux distro, I can only connect to the secure wifi 50% of the time and when I do successfully connect, it get booted off in a few minutes. At home I can connect to my WEP internet network easily.
Using Windows I can connect to my home WEP network and my university's WPA2 Enterprise network easily. Note: I work at the computing department here at my university, so I know that there is no anti-Linux mentaility which resticts access to Linux-based distros.)
How to get the Linksys: Wireless-N PCI Adapter with Dual-Band (WMP600N) working under FC10 with WEP encryption and linking up to a 54Mb/s Network. Hardware : D945GCLF2 with Intel atom330, 2G memory. As I got to this in a roundabout way, I would recommend that you follow the following steps and see if somewhere along the line your wireless starts working.
1: Get the latest driver from Ralink: [URL] In my case 2009_0918_RT2860_Linux_STA_v220.127.116.11.tar.bz2 (the line starting with RT2860PCI) Unpack, read the README_STA file and follow the instructions. Do: make && make install After this I could only get a wireless connection by doing:
I tried out ubuntu and I was beyond impressed with this OS. I decided it was time to do a complete migration to ubuntu. I installed Ubuntu 10.10 on my HP laptop and everything went great. It detected all the drivers and my laptop is working in tip top shape. I decided to install ubuntu on a custom PC I recently bought (used for Java development), and that is when I started to run into problems. These are the specs on my custom pc:
I am using Ubuntu 10.10 64-bit edition on the system. First problem I am having is there is no audio on my system. For this card I'm using an HDMI cable to connect it to my screen. I installed the NVIDIA proprietary drivers and there was no audio. I reverted back to drivers I found on the NVIDIA website and still there is no audio. Second problem I am having is attributed to the wifi card I am using (I think). I keep getting this message on boot after post (and on the terminal after I switch off the X server by stopping gdm):
However, after the system boots I can connect to the internet.
/sbin/lspci reports this: 01:00.0 Network controller: RaLink RT2800 802.11n PCI iwconfig reports nothing Network manager doesn't see it. The card works when I run it from Win 7. I tried rt2800 and rt2860. no results I am fairly new to Linux and I don't know all of the command line functions, How to get my wireless PCI card detected. After I installed the rt2860 driver, I didn't reboot. After rebooting, the card lit up and now I am functional. Woo Hoo.
I got the WMP300N installed by using ndiswrapper, but in Network Settings in YaST, I enter in all the info, and it will not connect. I set the Module Name as ndiswrapper, but it still won't connect. I blacklisted bcm43xx as some guide told me to. Could that be the problem?
I'm having trouble getting my wifi devices to work on my 128bit WEP network. I have a new Thinkpad T400, with an internal Intel PRO/Wireless 5100 AGN. I also have some cardbus cards: a Lucent ORiNOCO Gold, a Linksys Wireless-G, and a TRENDnet TEW-421PC. I have them set up as interfaces eth2, eth1, and eth3. (The TRENDnet isn't recognised as a network card at all, so no interface for it.) I have installed the latest firmware for the Linksys card.
The /etc/sysconfig/network-scripts/ifcfg-* files are virtually identical for all of them, differing only in the HWADDR and DEVICE lines. So here's the behaviour:
1. The Lucent card comes up just fine. 2. The internal 5100AGN and the Linksys cards won't come up, and watching with iwconfig shows that they're either associated with my AP OR they've got an encryption key set -- but not both. 3. When trying to bring up the 5100AGN, I get the following messages:
iwlagn: index 0 not used in uCode key table iwlagn: index 3 not used in uCode key table
/var/log/messages shows DHCPDISCOVER requests being sent, but they're bound to fail since the association with the AP with WEP isn't being completed. And yes, the ifcfg-* files really *are* identical except for the DEVICE and HWADDR lines. The /etc/udev/rules.d/70-persistent-net.rules file correctly maps the interfaces to the MAC addresses. So why does my antique ORiNOCO card work and thew newer ones fail? How can I track down what's being done wrong/not being done?
i have just installed 10.10 under wubi, first time trying to use this network card under ubuntu. works fine on XP where it connects with good signal strength to a zyxel p-600 b/g router (my 3 other machines also connect fine to this router)
i am using WPA2, it takes 30secs to 1min to connect in the first place, then runs slowly and with intermittent disconnects, reports good signal strength in network manager.
i have been fortunate enough to have 3 machines that run ubuntu flawlessly out of the box..
I am having some trouble getting my computer to connect to my wireless network. There is a wireless icon in the system tray. When I click on the icon I get a list of SSIDs associated with available wireless networks. To connect to one of of those networks I move the cursor over the SSID, the SSID is then highlighted, I select the highlighted SSID, then my computer connects to the selected network.
Sometimes the SSID associated wth my wireless network does not show up on the list. Sometimes it does. Normally the SSIDs on the list are in bold lettering. When the SSID of my network does appear it is in shaded lettering. When I move the cursor over the SSID it is not highlighted and I cannot select it. So you see it is not possible for me to select the SSID of my network and connect to my network.
The computer I am running is a ThinkPad R40. This is the wireless controller on the computer. I got this with "lspci". 02:02.0 Network controller: AIRONET Wireless Communications Cisco Aironet Wireless 802.11b
I've just installed Ubuntu 10.10 and everything seems to be working fine, but I can't seem to connect to my wireless network. I am able to see the wireless networks nearby, so I'm guessing that means the drivers are fine and the hardware is working. When I try to connect, I am seeing the wireless networks of my neighbors, but mine isn't showing. So I manually enter the information in and try to connect, but it doesn't seem to connect. I enter the WEP key and it attempts, then the WEP key screen pops up again, as if I entered the key incorrectly. I've tried many times and I'm 100% certain my key is correct. By the way, the chipset is: Ralink RT61 Which means it really should just work out of the box.
I would share my long awaited success with connecting my ubuntu laptop up to my universities (University of Western Sydney) wireless network. The rumors appeared true and they have finally implemented 802.11x authentication instead of that horrible java app netdirect. I am sure you've been cursing at its erratic stability. There is no linux documentation for airUWS-Lite nor anything more imformative than there windows/mac point and click steps found at [URL]. However with a few simple clicks you can have stable working connection.
When connecting make sure you have theses settings. Security: WPA & WPA2 Enterprise Authentication: Protected EAP (PEAP) #This is the settings that does not present itself correctly Anonymous Identity: leave blank PEAP Version: Automatic Inner Authentication: MSCHAPv2 Username: <YOUR 8 DIGIT STUDENT NUMBER> Password: your regular password