I can't start NFS Server with GSS option.I've added [URL] (example) principal via kadmin with -randkey option as mentioned at "6.4.8. Creating Kerberos Service Principals".After executing rcnfsserver start, /var/log/messages shows:"do you have a keytab entry for nfs/<your.host>@<YOUR.REALM> in /etc/krb5.keytab?"
View 2 RepliesI have one machine (out of a couple dozen) that continues to refuse to allow "vncserver :1" to start. It is perfectly happy with :2 - :9 but tells me :1 is already running - yet ps tells me that there is no running
Xvnc instance.
What have I done here and how do I get that session back? I've cleared the /tmp/.X11-unix entries but that did no good. Could I have checked something in Yast that is launching an invisible session?
I installed and configured mysql 5.0 on my opensuse 11.1 box. But I have no idea how to get it to start automatically when the server reboots.
View 3 Replies View RelatedThis morning I was configuring a DNS server through Yast at home, I've done it once before (in another wireless lan)and it works perfectly. But this morning, after I clicked "start dns server now", everything freezed, and caps lock light on keyboard kept flashing. I rebooted laptop,it couldn't boot into run level-5 and there were few "skipped" items and "failed" items displayed.... Sorry I'm new to linux so I re-installed it this afternoon, and kept /home partition, formatted / partition.
Everything seems to be fine after re-installation, again I tried configuring a DNS server and clicked "start dns server now", but the same problem appeared, caps lock light kept flashing and I rebooted the laptop but fortunately this time it didn't fail on any items when booting
In Yast-Network Settings, I choose "use controlled with network manager", and I can connect to wireless router and browsing web, but there are no any interfaces shown in Yast-Firewall, and this time, after I clicked "start dns server now", nothing happens, dns server just won't start...
After the install on the hd I had to modify manually the start option otherwise I wouldn't. I found out in the option that I have to give: pci=noacpi and the start will go on. My question is, how to do this automatically, I mean modifying before every boot would be annoying.
View 6 Replies View RelatedWhat is the best option: leave the ADSL modem as the router of my network, or use a Debian Linux server in place?
Info:
* there is high traffic on my network (at work time);
* 7 PCs on the network;
* Debian Linux server: PC - Intel Pentium IV 3.06 Ghz - 2 GB RAM.
I installed OpenSuse 11.2 LiveCD. I'm currently running patch download and installation so maybe this will fix my problem. When I use NetworkManager, WPA or WPA2 are not an option. I'm give four encryption methods (WEP 40, WEP 128, LEAP and Dynamic 801.x) Is this a problem with my Thinkpad T23's 802.11b wireless card? Do I need to install a patch?
View 4 Replies View RelatedI am using an Acer Aspire 5536 AMD dual core laptop with a 64bit installation of Susie 11.4. Using 11.2 I had no problems connecting to the wireless router. As soon as 11.4 was installed, clean install, and the laptop rebooted, network manager failed to start, until manually invoked and then enabling networking through the system tray. Even after this it will not connect to a wired or wireless network sometimes for more than 30 minutes.
View 9 Replies View RelatedI would like to use zypper to update openSUSE 11.2 through the Virtual Terminals (tty1 thro' tty6).
Network Interface is wlan0 (Wireless LAN, home network through a Router) that requires a password using WPA2.
My question is how to start wlan0 through the command-line ?
I have just installed opensuse 11.3. I am absolutely new for Linux and for this forum. I have tried to open Network manager to configure my wlan. But its not starting. How to start network manager and configuring my wlan.
View 4 Replies View Relatedright now, my machine runs ubuntu 10.10 due to work issue, i need to use windows server 2008 R2 (its a windows exclusive company) but i never used any of the active directory or anything from the windows server (only experience with windows is visual studio and those GAMES!), so i figure i need to practice a bit on my own b4 starting the job and just at the same time I found out as a univ student i get it for free! And plus, I am finding opensuse a better option for me than ubuntu So im wondering what i should do regarding these 2 systems here s some option
1). Install openSuse 11.4, and install VirtualBox and use windows server 2008 R2 on vbox
2). Install windows server 2008 R2 and then install openSuse alongside with it
3). Install windows server 2008 R2 and install openSuse in virtualBox
I have been using linux as my primary OS for more than a year now and I rlly need it for both school and my own entertainment. So wondering which option would best work out for me
wat are your opinions? PS: my machine is about 2 years ago a Dell laptop, with core 2 duo p8700 (2.53ghz) 4GB ram, and nvidia gfx, which even tho is still fast, but isnt rlly that snappy when it comes to virtualization even running xp in a virtual machine is quite laggy at times :S
I tried connect to internet through iPhone (bluetooth tether), so I followed one tutorial... It said I have to change "networkmanager" to "ifup" in yast>network settings, and make some other changes... I did it, but I couldn't connect via iphone... OK... I put back all changes, also changed ifpu to networkmanager.
After reboot, Knetowrkmanager gives me "network management disabled" on startup, instead of list of my networks.
Of course, I google for solution, but without any luck. And then, I don't know why, I killed Knetworkmanager, start it again, and.. it worked!
But now, I have to kill it, and start again always, when I reboot my laptop...(HP Compaq 6720s, BCM4312, KDE 4.3.4)
I'm using linux suse 9.3. Recently i try to run execution files but it shows an error try running with the option "-console" or "-silent" When I tried with the -console option, I got the error - The wizard cannot continue because of the following error: Invalid command line option: console is not supported (1001) (403)
[Code]...
Previously work normal. Started from some time ago, after reboot the server, the network card cannot be automatically started. Need to go into YAST's wired network which will activate the network card. Having checked 'chkconfig', the 'network' is on. Where can I check if they is any error log about auto enabling the network card?
View 3 Replies View Relatedwhen I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
View 3 Replies View RelatedI finally got my wireless card to work but I don't know how to start the network manager.
View 3 Replies View RelatedI seem to have somehow messed up my repositories and now NetworkManager isn't working.
I have two errors happening, which I'm sure are related. First of all, when I try to load knetworkmanager, I get the error:
Code:
knetworkmanager: error while loading shared libraries: libkminterminals.so.4: cannot open shared object file: No such file or directory Second of all, when I restart my computer, upon loading I get a message from Akondi Server Self-Test saying several databases failed. I've never seen this before, so I think fixing these errors would be best? Some of the errors are MySql failed, akondi not registered at dbus, etc.
Lastly, I don't have a wired connection so currently my machine has no internet. I'm using a second laptop to get necessary files and I transfer them with usb.
i used to start vpn connections with knetworkmanaer in 11.3now i migrated to 11.4 and had to install the networkmanager plasmoid instead. the reason is variosu crashes and that knetworkmanager is unable to start 3g connections. however it was able to start vpn.now i am using the plasmoid and i can get the 3g started but not the vpn. when i click on the connection nothing happens.
View 9 Replies View RelatedI have installed the package "Web and LAMPP Server" with the YAST2 installation manager on my openSuse 11.1. The installation runs well without any error messages. When I try to start Apache2 in the YAST2 runlevel manager or from the command line it fails.The start problem seems to me simular as amavis configuration. I have to configure /etc/amavisd.conf before a was able to start amavis in the YAST2 runlevel manager.
How can I make Apache2 to start? Do I have to configure a special file before I am able to start Apache2 in the YAST2 runlevel manager or why doesn�t Apache2 start?
I have installed the Suse Enterprise server 11 SP1 on my laptop. I have the atheros AR8132 network card, and it seams the suse is detecting correctly, but i can't start the network up. He returns an erros saying that the eth0 is not supported by suse, or kernel, i must check to be sure.
View 1 Replies View RelatedI'm configuring a computer for someone and I don't know the wireless network they will be using. (They are not technical.) I've setup networking to use NetworkManager. It works just fine.However, Knetworkmanager won't startup at boot/login. Therefore, the network doesn't startup automatically. I have to click on the icon in the menu to start it.That works well, but it should be configurable to startup automatically.I've searched this forum for answers and don't find any good ones. It seems there isn't an answer or there is a bug in KDE 4.x. (I'm using KDE 4.3.x)
View 9 Replies View RelatedI have just installed squid and sarg, both are working well. I cannot get squid to start when the machine boots. I installed webmin and configured the setup through the webmin interface where I checked the "start at boot option". I think the problem is that my network card responsible for the web connection is wireless so when squid tries to load during boot it is trying before the Wireless card is up and so it fails. I have tried multiple methods of adding a script to the "dispatcher.d" folder in "NetworkManager" to load squid after wlan0 is up but all have failed to bring up the squid proxy without my interaction. I have not found any two sites that describe the syntax for "dispatcher.d" alike so I may have the command wrong but I have no what to do.
View 9 Replies View RelatedI made a brief foray into IceWM g which I used tradition ifup" instead of KNetworkManager. I switched back to KDE and even though I have re-enabled "user controlled with network manager" KNetworkManager still doesn't run at KDE login. The connection's fine and I can start it up myself and it works.What is the best way to set it back to run at login so I'm automatically connected to the network?
View 9 Replies View RelatedMy eth0 is not up everytime at boot up. I will need to <service network restart> to get it up.
I have used yast's /etc/sysconfig editor to set /etc/sysconfig/network/config -> MANDATORY_DEVICES to eth0
And I have also added <alias eth0 e1000e> to /etc/modprobe.conf.local
And also set eth0 device to activate device at boot time using Network Card Setup.
But eth0 is still not starting up at boot time. What should I do to get it up at boot time?
I'm using openSUSE 10.3. And no, I'm am unable to move to 11.2
All of a sudden the Knetworkmanager icon disappeared from my panel and when I try to start it from a console I get the following output.
ion@linux-4cfs:~> knetworkmanager
terminate called after throwing an instance of 'std::bad_alloc'
what(): std::bad_alloc
[code]...
I am running 11.3 on a desktop and knetworkmanager used to startup upon login.However recently, knetworkmanager do NOT startup upon login. have to manually start the application from the menu.YaST / Network Devices / Network Settings / Global Options Tab is all the while set to "User Controlled With NetworkManager"I've even updated to KDE4.5 but the problem still persists.Any idea what can be done to get knetworkmanager to startup upon login?
View 9 Replies View RelatedThinkpad Edge, Intel Version, OS 11.3, KDE 4.5.2after my notebook shut down (due to a low battery) when I was just using Knetworkmanager to add a new W-LAN connection, I can't start Knetworkmanager anymore. Terminal output is:
Code:
~> knetworkmanager
Connecting to deprecated signal
[code]...
Anybody know if there's a way I can ssh into a remote box and have vlc start a movie on the remote machines display.
I have openvpn setup and can ssh to all my machines. I just want to freak the **** out of my sister when she jumps on the computer.
Installed opensuse 11.4 and wireless network started automatically. Then I changed the name of the computer in YAST, and restarted. Now I cannot get NM to start automatically at boot. The red X shows up on the panel app Network Management and settings buttons do not activate the wireless device. I have to start NetworkManager from the command line. After about 30 seconds the wireless hardware symbol turns on and then I can connect to the network.
HP Pavilion Dv7
opensuse 11.4 64bit AMD
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
KDE desktop
[code]....
I get "unable to open file: /etc/samba/dhcp.conf" messages in /var/log/samba/log.* worked perfectly fine in 11.3. permissions are 755 on /etc/samba and all files are 644 or 600 in the directory. Starting manually gives same result. My 11.2 and 11.3 machines continue to work. this is a weird one and I don't see any posts relating to this. For other uses, the machine seems ok.
View 2 Replies View Related