OpenSUSE Network :: Can't Get IP Address From DHCP

Jun 3, 2010

I had 200 workstation with both Windows XP and SuSe Enterprise Linux. Sometime, a few clients can't get IP address from DHCP with SuSe OS. With the same computer, if I reboot and chose Windows XP, it work fine. The log message or the boot message was "No IP Address yet ...backgrounding". I tried to reconfig network device, restart services, change another port, change another line LAN, set static IP Address .... but there's no luck for me.

View 5 Replies


ADVERTISEMENT

OpenSUSE Network :: Having IP Address Via DHCP But No Connection?

Apr 9, 2010

I've just installed opensuse 11.2 with the network installation iso. During the installation, it has got the IP via DHCP without any problem, and I has downloaded all the needed packets without problems... But when the installation finish.I have no network connection It's strange, because I have IP address, I get the IP from the DHCP server, and I can see the IP addreess if I do "ifconfig", the default route and even the DNS servers in the resolv.conf file; but I cannot ping my gateway (that is the DHCP server as well!!), I cannot ping anything in my network and either anything in internet. I see a network error at the start, but it finally gets the ip address. In the dmesg, the last message repeats over and over. The machine is a Hyper-V virtual machine, but as I said... I worked very well during the installation, I don't know what is going on. I've tried to reinstall, but it doesn't make any difference

View 2 Replies View Related

OpenSUSE Network :: Dhcp Client Does Not Receive The Dns Server Address

May 18, 2010

I have installed a working DNS server on my home network. I have an unique server, devoted to dns, gateway, storage which runs opensuse 11.0 (I known that it is rather old). Two new clients require DHCP. I have installed, using yast, a very simple DHCP server, according to the following config:

option domain-name "XXX.XXX";
option domain-name-servers 192.168.0.1;
option routers 192.168.0.1;

[code]...

(I have tried to add "ddns-update-style none", and to remove the ntp-servers option, since my server is not a time server, without success). Unfortunately, even if the client (a mac running OSX 10.4) receives a right IP and gateway address, it displays neither dns server address nor default domain name. The same mac, on my office network (not managed by me), receives everything.

View 5 Replies View Related

OpenSUSE Network :: How In World Do I Configure SSH With DHCP Assigned Address

Aug 7, 2011

I am just trying to get SSH working between 2 local machines on OpensSuse 11.4 boxes. I have the SSHD daemon running, the firewall is configured to allow SSH to pass, and I am using SSH's password authentication. However, my machines cannot see each other. Anytime I try to SSH, I get "Could not resolve hostname<hostname>: Name or service not known."

Of course, that leads me to believe I need an entry in my /etc/hosts file. However, I use DHCP, and therefore have a dynamic IP address. Therefore, my hosts names will only be good until the next IP renewal. How in the world do I configure SSH with a DHCP assigned address?

View 4 Replies View Related

OpenSUSE Network :: Unable To Acquire IP Address Over DHCP With Ipheth Driver In 11.4 X86_64?

Jun 14, 2011

Although Im using SuSE since 7.2 this is my first forum post here. I just plugged in my iPhone with USB and 11.4 created an eth1 interface for the iPhone and also loads the ipheth kernel module. Anyhow I am not able to acquire an IP address using DHCP. The iPhone OS is 4.2.1 and its an iPhone 3G 8GB black

View 2 Replies View Related

Ubuntu Networking :: Static IP Address And The Install Configures For A DHCP Configured Address - Network Not Starting

Dec 16, 2010

Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.

So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.

My files are as follows:

View 2 Replies View Related

Networking :: Configure A (openSUSE) Client To Dhcp To EBox DHCP Server - Lease An IP Address

Mar 25, 2010

I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response

openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.

The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0

I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?

View 2 Replies View Related

Fedora Networking :: No IP Address From DHCP Server On Wireless Network?

Feb 12, 2009

I have installed Fedora 10 on my A860 Dell Vostrol Laptop with AR242X Atheros Wireless card. Wireless card worked out of the box and i could detect wireless network and connect to it. But i have a problem that, my wireless connection is not able to get IP address from the DHCP server. Please help me out what can i do to get this working. I am using WEP security and authentication is open system.

I have windows 7 beta installed on the same machine and on that wireless network works fine so i am sure that there is no problem with the wirless network. I am using DIR-300 router from D-LINK. I tried to see packet log on wireshark and there i see that there is no reply to the DHCP discover message. Actually i don't see any RX packets at all. Which is not normal as there is traffic on the network.

View 14 Replies View Related

Networking :: Windows XP Network Can't Acquire DHCP Address From Debian Squeeze

Apr 18, 2011

I setup the dnsmasq in debian squeeze as dhcp and dns server, for the debian host i assigned the static ip addresses, and configured the xp for dhcp. Windows XP network can't acquire DHCP address from debian squeeze with this error:

Quote:

error unable to contact your dhcp server Request has timed out.

this is the tcpdump output in debian for the xp network:

Quote:

15:12:10.631635 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:13:16.611793 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:13:16.611793 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:12:42.631730 ARP, Request who-has 169.254.202.161 tell 169.254.202.161, length 4615:12:44.613568 ARP, Request who-has

[code]....

View 11 Replies View Related

General :: Determine Whether Computer 'gets IP Address Information From Dhcp Server On Network'

Sep 24, 2010

First, (for samba) how do I determine whether my computer "gets IP address information from a dhcp server on the network," and whether "the dhcp server provides info about WINS servers ("NetBIOS name servers") present on the network," and consequently whether a change to my smb.conf file, "so that DHCP-provided WINS settings will automatically be read from /etc/samba/dhcp.conf," and whether the dhcp3-client package must be installed?

View 2 Replies View Related

Fedora Networking :: Wireless - Shows Up In The Network Manager - Does Not Get An Ip Address From DHCP Server

May 24, 2010

I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.

However it does not get an ip address from the DHCP server. Below is what I get in the messages log:

View 1 Replies View Related

Ubuntu Networking :: IP Address Set To Manual But Still Queries DHCP For Address

Mar 12, 2011

I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.

View 1 Replies View Related

OpenSUSE Network :: Using As A Network Gateway - Renew DHCP Lease

Jul 15, 2010

Why trying to avoid ranting about my Linksys router, I'll try and keep things short. I have a Linksys router in which the default firmware was terrible and would not correctly renew its DHCP lease. After getting feed up with that I flashed dd-wrt on the router and now it works better but randomly DNS queries would stop being resolved. To rule out the chances that it is my ISPs DNS servers I switched my DNS to openDNS, same problem happens (although I have to admit openDNS is a lot better than what my ISP has).

Anyways I'm about feed up with it and about an inch away from drop kicking the thing out my window. To avoid that I figured I will give it one more change and instead of using my Linksys as my network gateway I'll move all of that to my home server, and make the Linksys just an wireless AP. Besides setting up DHCP, DNS, and iptables on the server is there anything else I will need to know and setup on the server to make this work?

Side note anyone using openSUSE for DHCP know if setting up reserved IPs for certain MAC address is possible?

View 2 Replies View Related

OpenSUSE Network :: Enable Static DNS Address For Mobile Broadband In KDE Network Manager?

Mar 5, 2010

How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.

View 3 Replies View Related

OpenSUSE Network :: Error As "This Address Uses A Network Port Which Is Normally Used For Purposes Other Than Web Browsing

Jul 27, 2011

I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -

cups:/usr/share/cups/banners # cups-config --version
1.3.9
cups:/usr/share/cups/banners # cat /proc/version
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100

I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.

2. LINUX - LINUX Printing - OK
LINUX - WINDOWS Printing - OK
WINDOWS - LINUX Printing - NOT OK

While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.

View 3 Replies View Related

OpenSUSE Network :: DHCP Is Not Updating DNS

Aug 11, 2010

I have a small network setup and I cannot get DNS to work. DHCP is functioning normal and working fine but it cannot update the DNS pointers for some reason. My files are below.

dhcpd.conf -----------------------

Code:
ddns-updates on;
ddns-domainname "mydomain.lan";
ddns-update-style ad-hoc;
allow unknown-clients;

[Code].....

View 9 Replies View Related

OpenSUSE Wireless :: Network Manager Stuck On 'setting Network Address' Then Continuously Prompts For Hex Or ASCII Key

May 28, 2011

When I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.

I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.

View 9 Replies View Related

OpenSUSE Network :: Can't Get An IP Address Yast2 And Network Settings Displays?

Jan 31, 2010

I've updated a desktop from 11.1 to 11.2 with the NET CD. After completion everything worked fine, though I have some issues with the NIC. been looking on the net and the provided solutions haven't been able to resolve the matter. After reboot I don't get an IP address, I go into Yast2 and network settings displays:

I have to delete the unknown device everytime after a reboot in order to get a new IP address. After that all works as it is suppsed to. I've been looking into the /etc/udev/rules.d/70-persistent-net.rules and deleted all that was in there,

View 6 Replies View Related

OpenSUSE Network :: Can't Connect To Internets Via DHCP

Feb 10, 2010

i don't know the proper commands to list my system information. Up until recently, the internet worked fine, but suddenly stopped. I opened up YaST2 and found that the network device was set up to never turn on, and i switched it to "at boot time" but it still doesn't work.

View 9 Replies View Related

OpenSUSE Network :: VLAN On 11 Then DHCP Query?

Apr 26, 2010

basing on the research and trial and error which am still on the trial stage with errors here's the scenario We have 5 VLAN's with and existing Windows DHCP Server, that serves 5 Scopes for the 5 VLAN's 192.168.100.x and 192.168.200.x IP Addressess evrything works well on our Windows DHCP server, what i want to do is replace our windows dhcp server with a linux box , with one NIC , ive read about VLAN on linux 802.xx something and VLAN Tagging am already confused on what to do.. what i want to ask you guys is an assistance implementation the vLAN on linux then the dhcpd.conf

View 9 Replies View Related

OpenSUSE Network :: Changing Hostname Via DHCP?

Jan 29, 2011

I cannot uncheck the "Change Hostname via DHCP" box because it is disabled. Next to it says "No interface with dhcp". How can I fix it? I'm using OpenSUSE 11.3/KDE4

View 3 Replies View Related

OpenSUSE Network :: Samba PDC + Dhcp Server 11.2 - Unable To Use Them

Jan 14, 2010

I have setup an dhcp server wich allows ICS, and a samba server as a PDC. I can access the shares from windows if I type the server Ip (ej. \192.168.0.1), however if if write the address (ej. \dbaserver) I cannot access them.If I type ping dbaserver on a command prompt, it returns 127.0.0.2 not 192.168.0.1, what could be wrong. I asume because of this I cannot join the domain also.

View 4 Replies View Related

OpenSUSE Network :: DHCP Configuration Using Host Declaration

Mar 19, 2010

I am trying to enable DHCP so that it will give out IP's to some XP boxes when they boot. I have had success doing it dynamically, but not statically using the host declaration.
host xpTest {
hardware ethernet 00:50:56:2A:3B:00;
fixed-address 192.168.100.2;
}
My question is, what should the subnet declaration be if I only want to hand out static IP's like this? Also, the host is the same name that is specified in /etc/hosts correct?

View 3 Replies View Related

OpenSUSE Network :: DHCP Overriding Static Setting?

Apr 3, 2010

I'm maintaining a very modest network at home, with OpenSUSE as OS on the server. I got the DHCP and routing working by following the instructions in the wiki. However, every time I run dhclient on the server/router, it appears my own DHCP server assigns an address to the internal network card despite the fact I specifically assigned it to be static using Yast. The situation resolves itself when I restart the network services with the command /etc/init.d/network restart. Otherwise no problem, but it also seems the internal network card gets a "new" IP from my server every time the external card requests one from the ISP. This is more of an issue.

View 5 Replies View Related

OpenSUSE Network :: Getting Yast DHCP Out Of Expert Mode?

Dec 22, 2010

I feel really dumb for asking this but I cant figure out how to get it back to simple mode

View 4 Replies View Related

OpenSUSE Network :: Automatic Proxy Configuration Via DHCP?

Dec 23, 2010

Automatic Proxy Configuration via DHCP | AGIX Linux Tutorials & HowTo's | Ubuntu Focuson openSUSE not work, Why? # These 2 following lines are the key to your pac success:option local-pac-server code 252 = text;option local-pac-server "http://192.168.1.254/wpad.pac";

View 2 Replies View Related

OpenSUSE Network :: Can't Connect To Internet After Configuring To Dhcp / Fix It?

Sep 12, 2011

I configure my server just like on the link found in novell i hope some can help me here. my client is able to recieve DHCP address and everything is working fine on the network how ever my client cannot pullup any website, but my server is able to pullup whats wrong on this one.

Cool Solutions: HOW-TO: Set Up a SUSE 10 Machine As a Router

View 3 Replies View Related

OpenSUSE Network :: Samba Config For DHCP Client Laptop?

Jan 11, 2010

I'll try not to be too wordy. Want to get my openSUSE 11.2 (fresh install) laptop to see my network shares ...not to be a server or share any files. I've looked at 50 websites and everything seems to be "server" and "share" oriented. Maybe I (newb) am confused by the terminology...

I have a router that provides DHCP. My LAN PC's consist of a Vista laptop, an XP DAW, and a Kubuntu file server. Somehow I got Kubuntu configured properly, all of the Windows machines can access it and vice-versa. The Kubuntu smb.conf does not work on this laptop, and it seems overkill -no shares needed here. And yes, I get DHCP and interweb on the laptop -posted this with it.

All I want is access to my (other) network drives from this (openSUSE 11.2) laptop. Not a server, not to share. This is easy... right? It's driving me nuts Is there a Samba configuration that will let me jump onto networks and surf Windows/Samba shares like any old Windoze box browsing Network Neighborhood? Do I have to be a Samba guru?

View 7 Replies View Related

OpenSUSE Network :: Couldn't Connect To Internet - Dhcp Don't Work

Sep 26, 2010

I have installed openSUSE KDE 11.3 on my notebook. Everything looks great, but I can't connect on internet. It looks like dhcp don't work. Wireless works fine, only auto eth0 don't work.

View 9 Replies View Related

OpenSUSE Network :: DHCP - Internal Computers Connect To The Internet?

Nov 23, 2010

I set up a server that has dhcp going. This works 100% as I get ipaddresses. My question is how do these internal computers connect to the internet? There is a proxy that needs to be passed as well...

Is this just a simple case of portforwarding or is this a completely different thing?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved