I am newbie to linux, I am dealing with Fedora core 13. I have already succeedded in building an ad hoc network and a WLAN network. My next step is to get some networking statistics such delay, throughput, etc. So, I need traffic to flow through the network for both multimedia traffic and bulk data traffic. How to send files between nodes on the network (I found commands ftp, rcp but do not know whether they are the correct choice for this). ID their any application to perform this?
Also, I want to perform some video streaming between two nodes to study the behavior of real time data transfer. Is thier any application to perform this?
- Intel P4 3.2GHz - Gigabyte G32M-S2L - 3GB RAM DDR2 - 3 x 1TB RAID5 (MDADM) - 1 x 1TB OS Drive
New Linux user here. I'm running 11.3 x64 gnome (runlevel3) on my headless home file server. I've mounted my RAID array onto /shared and have setup samba (through Yast) for file sharing. However I am having an issue when I transfer multiple small files over the network (i.e music) it will crash the box. I am unable to reach it through ping or SSH. It is also physically unresponsive where by connecting a keyboard or mouse to the system will not work.
Looking through /var/log/messages does not indicate any sort of issue. I've tried turning off unnecessary programs (rTorrent etc) to make sure it isn't overloading the connections however the box still crashes. Although transferring files locally from HDD to HDD does not crash the server.
I have an install of OpenSUSE (11.4) and I'm running vsftp. We have several companies already running scripts on their end to pull all the files out of a mounted Windows share, then delete the contents of that folder. What I'm needing to do is after the files are dropped on a mounted Windows share, I need to somehow connect to an FTP server at another location, send all the files from that Windows share, and delete all the contents from that share. And on top of that, I would like to have this happen everytime a file is placed in the folder or at regular 2 hour intervals or something like that. Can someone point me in the right direction to learn how to do this. I'm fairly familiar with OpenSUSE but this is beyond my knowledge, for now.
I am currently running Windows Xp with service pack 3 and OpenSuse 11.0 (i586) on the same machine on separate hard drives. here are the specs on the machine. (Note: it is only a single core machine. I have no idea why both Suse and Windows say it is dual core as the processor was bought and installed months before dual cores went on the market.)
OS Information OS: Linux 220.127.116.11-0.5-default i686 Current user: telknor@linux-l3e2 System: openSUSE 11.0 (i586) KDE: 4.0.4 (KDE 4.0.4 >= 20080505) "release 15.4"
Now on to my problem. About a year ago I had to wipe my Windows drive and backed up about 32 GB of stuff from it to my OpenSuse drive. I did this from the Suse OS using Dolphin. In fact I can see, open, change, delete, modify layout, and move stuff around on the Windows drive all day long from Suse. I can as I said pull stuff over to the Suse drive from Windows drive while in Suse and save to Suse drive. Now I have need of the stuff that was moved but Windows does not see the Suse drive for what it is. Just says 'unknown partion type' gives size in GB and ignores it otherwise. From Suse if I try to move stuff back to the Windows drive it starts to transfer then stops and tells me it does not have permission to access the destination drive, folder, or location depending on how I tried to save it to the Windows drive. Adding new hard drives to the system does not help and the external 1 TB drive we have Suse can see it but will not do anything with it. The thumb drives on the other hand Suse does not have a problem with. It will open, read, and write to them all day long. Suse will not access the network to dump files to the network file server and it does not see any other systems on the network not even the ones running the same OS. I want to do the following:
1. Move the Windows files from the Suse drive to the Windows drive in same machine or to the network file server (also a windows machine)
2. Move all the Suse files to another machine running same Suse OS.
3. Wipe the Suse drive in this Machine so that Windows can use it.
I have the problems with transfer speed between samba and Windows XP clients.
Samba server configuration: Quad Core 6600 CPU. 4 Gb RAM OpenSUSE 11.2 with kernel "18.104.22.168-0.1-desktop" Samba - samba-3.5.1-1.1.i586 Test: 4 GB File copying. One file.
Transfer speed from Samba Server to Windows 7 and XP clients: (Windows clients copy file from Server share -> to local drive) From Server to Windows 7 client 1: 85-90 Mb/sec From Server to Windows 7 client 2: 90-100 Mb/sec From Server to XP1 client 3 75-100 Mb/sec
Transfer speed from Windows 7 and XP clients TO Samba Server: (client copy file from local drive -> to server Share) From Server to Windows 7 client 1: 12-20 Mb/sec From Server to Windows 7 client 2: 30-35 Mb/sec From Server to Windows XP client 1 20-27 Mb/sec
(Copying file from Windows local drive to Windows remote share) From Window 7 client 1 TO Windows XP client 1 40-50 Mb/sec From Window 7 client 2 TO Windows XP client 1 50-60 Mb/sec
Copying file from Windows 7 client 2 share -> TO Windows XP client 1 show me 100-120 Mb/sec speed permanent. Copying file from Linux hosts to NFS server is stable 50-90 Mb/sec bidirectional.
This part of my smb.conf file Code: # version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the # samba-doc package is installed. # Date: 2009-10-27 [global] log level = 1 debug level = 0 max log size = 50 .....
I have very slow write speed when copying file from Windows clients to Samba Share. Samba speed is slower than Windows native clients connections ?
When accessing an NFS mount for a large (200MB+) file transfer, the transfer starts rapidly, then becomes slower and slower until it hangs. On several occasions, it has frozen the client machine. Both client and server are set to default to nfs version 3. Slowdown and hang also occur when connecting to FreeBSD NFS mounts.
Presumably (I hope), there is some sort of configuration for the client that needs to be set. what should be changed in the configuration? This worked out of the box in OpenSUSE 11.0.
Should I be able to transfer files between computers wired to the same router? Is the router bridging function used to transfer data between wired computers? I just got DSL and I'm new to networking. I have openSuse 11.4 on two computers plugged into a Belkin router. The internet connection to my ISP works from either computer. If I ping $HOSTNAME from either computer, the hostnames are different, but the IP address is the same which is that of my ISP. I only have the one router, but it has a bridging option. I don't know if it can do both bridging and routing simultaneously.
i am trying to transfer a file from my live linux machine to remote linux machine it is a mail server and single .tar.gz file include all data. but during transfer it stop working. how can i work and trouble shooot the matter. is there any better way then this to transfer huge 14 gb file over network,vpn,wan transfer. the speed is 1mbps,rest of the file it copy it.
[root@sa1 logs_os_backup]# less remote.log Wed Mar 10 09:12:01 AST 2010 building file list ... done bkup_1.tar.gz deflate on token returned 0 (87164 bytes left) rsync error: error in rsync protocol data stream (code 12) at token.c(274) building file list ... done code....
Recently I had a situation where I had to transfer data from a PC to a Mac. Usually we simply convert the data as necessary, ie. bookmarks, contacts, etc. move the info to a dropbox account and use Windows networking to access the dropbox from a Mac. Well, there was a network issue and it was suggested that I boot to Ubuntu and do this. We do have Ubuntu on a flash drive but I was lost from there. Can anyone point me in the direction of documentation or assist me in understanding how this would be accomplished? I have a Mac, PC and Linux box at home so hopefully I have all the necessary tools to test this out.
I am quite newbie with Linux networking and I want to know if there exist a log in Linux where errors during transfers are stored. I mean, when I'm transferring data between two hosts is there any way to log somewhere (where?) the errors or warning during the transfer? That is, connection failures, TCP or UDP errors, etc.? Is there any "log level" to select the errors to be displayed in the log not to work with a huge log file?
I'm going to be needing to copy over 2 terabytes from one drive to another in a couple of days and I need something that I can use to transfer the files with CRC checking. Something comparable to Teracopy in Windows.
Open Source is an absolute must. I'm running on Debian and getting away from Windows to get away from all of the proprietary software. If it's going to be proprietary I might aswell just boot back into Windows as far as I'm concerned.
Some of the features that would be nice but not needed
-GUI (preferably gtk) -Pause/Resume (it's going to be a long transfer so it would be nice.)
Those would be nice but CRC checking is an absolute must have for so much data.
How can I transfer data from one user account to the other? I wish to delete one of the accounts but before that I want to transfer all the data in that account to the other account so that my data is saved.
I am running ubuntu 10.4 lts desktop and ubuntu 9.10 server with the gui active. On both of these machines the data transfer rates over usb and lan have slowed down quite considerably. Also over multiple devices, not the same hardware everytime I try to transfer something.
For the past few days, i have been trying to fix a common error related to mtp devices such as creative zen. Because of the new updated libmtp8 library, it is impossible to transfer files into any mtp devices. However there is a fix that will remove this issue.
1. Get the older karmic version of libmtp8 from here: URL... 2. Install this package from terminal using: sudo dpkg -i libmtp8*.deb 3. Lock libmtp8 from the synaptic package manager, so it doesn't get updated. 4. Uninstall and then downgrade any mtp packages (through packages.ubuntu.com) that become broken after step 2 to the karmic version. 5. Enjoy.
i have got a laptop for the first time that i'll be taking to college. I have a lot of data on my PC which i want to transfer to my laptop. My computer has Lucid 32bit while laptop has 64 bit installed,Data is too much and transfering via usb drives will take a lot of time.. I do not know how to set up a network.
I need make the copy of my images system on the second PC. But I can`t transfer its data. It seems that the way to images is stored absolutly, for example /home/john/images/holiday. If the second user`s name is Marry, the way will be /home/marry/images/holiday and Shotwell don`t accept this.
I have a number of queries but will start with one. I presently operate 11.04 Classic (no effects). OS is NOT set up as dual boot. As I am considering purchasing a new Desktop, I am wondering what is the best way to recover such things as folders, Firefox bookmarks etc. for four users.
I do have a external HDD which I guess could be used for a possible backup if that is the way to go! The new computer will probably have Windows 7 installed with which I assume I would probably dual boot.
I have installed Xubuntu 11.04. I want to see where when data is transfered by XUbuntu(through internet). In task manager i didn't find any such thing. In fedora there is system monitor where networking information is given to user where is such thing in XUbuntu. My main reason for asking such thing is that i have limited internet connection i don't want that Xubuntu update itself or any other such thing. you may also tell me how to stop updates of Xubuntu 11.04.
i am using NCTUns simulator and having problem while receiving message from an OBU. sending a message works properly but recving creates problem and fails. i am using exactly the same function as used by the developers in the demos but still no luck. i copy the code attch the screen shots to have a look
sendto() and recvfrom() are used for message transfer. they both return >-1 if they are executed successfully. please have a look in the screenshots. agentClientReportStatus is the built in packet format which im using here whose fields i filled manually are in the code below.
agentClientReportStatus *message,*mssg; int remainTime,n,n2,n3,i,sendingaddress,value; sockaddr_in cli_addr; timeval now;
I am doing a project where 2 clients connect to server and communicate (chat) and transfer data one after other using sockets. I have working code for this in C language. Now our main aim is to create a communication link where two clients transfer multiple streams data parallely. To be more precise i want to transfer images files and audio files parallel at same time, so is it possible to send data parallel using one socket connection?
I am using rhel4 with kernel 2.6.9-55 ELsmp. I have recently purchased 250gb seagate portable usb HDD. I have already mounted the usb HDD by updating Kernel with mode 755 and root user. I can transfer file from usb HDD to rhel system. But I am unable to make directory or copy file from rhel4 file system to usb HDD with ntfs. It is giving error message of permission denied though the device having write permission. I have already installed ntfsprog-2.0.0 in root. But there is no improvement. Is there any thing I can do to transfer data from linux system to ntfs.
For example I am copying data to USB-flash drive using some file manager. When the file manager shows that transfer is complete, flash drive indicator continues to light. As far as I know this is some kind of caching system...
1. Is it OK to close file manager when transfer window is closed but the flash drive indicator continues to light (data is still being copied)?
2. Is it better if I turn off this caching technology?