OpenSUSE Network :: SSH Client Hangs After Typing Password

Jan 5, 2011

After connecting to any host, the openssh client hangs after I type the password. The strange part is, it only hangs if when I use the wlan card. If I connect my phone to the computer and uses it to connect to my server, it works 100%.

If I use any other computer at the wireless network, it works 100%
If I use putty on the same machine, it works 100%

It is only a problem when I use the build-in wireless card, under openSuSE 11.3, on my Lenovo L512. (note that everything besides ssh works completely).

View 4 Replies


ADVERTISEMENT

OpenSUSE Network :: 11.3 NFS Client Hangs On Large File Transfer?

Jan 2, 2011

When accessing an NFS mount for a large (200MB+) file transfer, the transfer starts rapidly, then becomes slower and slower until it hangs. On several occasions, it has frozen the client machine. Both client and server are set to default to nfs version 3. Slowdown and hang also occur when connecting to FreeBSD NFS mounts.

Presumably (I hope), there is some sort of configuration for the client that needs to be set. what should be changed in the configuration? This worked out of the box in OpenSUSE 11.0.

View 9 Replies View Related

OpenSUSE :: Kickoff Menu Hangs Long Time While Typing Appname / Fix It?

Feb 10, 2010

Sometimes I get this weird thing where typing a name into the kickoff menu hangs after a few letters. It hangs the entire computer! Once it happens, I try to close it but have to wait about 20 seconds before I can do anything on the computer. Then everything else works fine (after it's closed). But if I go back to kickoff and try again, it does the same thing! I can't seem to find anything in "top" to indicate what's happening.

openSUSE 11.2
KDE 4.3.4
Linux 2.6.31.8-0.1-default i686
AMD Sempron(tm) Processor 3100+ 1.8 GHZ
nVIDIA G98 GForce 8400 GS with nvidia driver

Total memory (RAM): 1.4 GiB
Free memory: 541.6 MiB (+ 506.1 MiB Caches)
Free swap: 2.0 GiB

Here's "top" during a recent issue where konqueror wasn't opening to show sysinfo and there was some hanging (although this was after it came back from kickoff hanging) code...

View 9 Replies View Related

Ubuntu Networking :: TP-Link AR922X WLAN PCI Card - Can't Join Into The Network After Typing The Password

Jul 5, 2010

I've just got a TP-Link wn-851n PCI WLAN card, and the problem is that ubuntu can search for the network, but I can't join into the network after typing the password. I'm sure that it is correct as m Windows notebook is also using that network.

Taking a look in dmesg, and it start to loop this message after I joined the network.

Quote:

View 1 Replies View Related

OpenSUSE Network :: SAMBA As PDC On SLES 10.2 - Error When Users On Windows Client Try To Change Password

Oct 11, 2010

I installed SLES 10.2 with SAMBA 3.5.5.43 to retire our old Microsoft Windows 2000 Server and save some money. All was fine until last week when our chief asked to me to set password expiration for all clients. This morning, all users cannot logon because, when they logon, windows asks to change password and then it gives error error "Access Denied".

[code]...

View 1 Replies View Related

Ubuntu :: Change Root Password - Typing A Password, No Characters Show Up?

Mar 9, 2010

I'm really new to Linux so this will probably sound like a pretty naive question to most users, but how do you change the root password?To install Java, I have to type # su into Terminal,which then asks for the password.What's weird is that when I start typing a password, no characters show up. I don't know if this is supposed to happen or not.I've found a bunch of different sites on the Internet that explain how to change the root password, but none of them seem to work for my specific work station.

I've got Ubuntu 9.10 64 bit. In the GRUB boot menu, I can choose to boot normal or in recovery mode (I'm led to believe older versions don't have this option).I've tried typing # sudo passwrd into Terminal, but I already have a root password set up apparently, so I can't change it there.

View 4 Replies View Related

OpenSUSE Network :: How To Avoid Typing Route Add Default GW

Jan 14, 2010

I have a static ip on my wired (eth0) connection. I thought I had it well set up in yast. In the routing section I do have my default gw coming up there, with the the right nw i/f (eth0) associate with it. However, when I boot up, y config seems to ignore that fact, and I have to keep goign to root and typing "route add default gw <mygwip>" each time, which is something I want to avoid. Isn't it odd that the route settings created by yast have no effect? If they did, the route would be set up on bootup and I would haven't to do that typing.

View 2 Replies View Related

OpenSUSE Network :: Network Manager Requires To Enter Password Every Time - Login To Unlock Password Keyring?

Jan 29, 2009

I've tried Ubuntu, Arch, and most recently Fedora but the SUSE GNOME environment blows everything else away!

The only problem (so far) is that Network Manager requires you to enter your password every time you login to unlock the password keyring. I want to disable this.

I think some distros disable the prompt by using the login password to unlock the keyring, but I use auto-login (if that makes a difference).

View 4 Replies View Related

Ubuntu :: 10.10 Hangs Unless Typing Or Moving Cursor?

Nov 14, 2010

I've used Ubuntu for a year or two on my laptop (Dell Inspiron 1440), but with the release and install of 10.10, whenever I'm not moving the cursor or typing, it freezes up. I can get it to unfreeze by typing/moving cursor usually.I dual boot between Ubuntu and Mint and it also does this on Mint 10. When I would reboot, the hanging would stop for awhile, but would come back 10 - 20 minutes later. It would continue until I rebooted again. Clearly I can't use 10.10, which is a huge bummer for me.

View 9 Replies View Related

OpenSUSE Install :: Nfs Client Hangs System?

Aug 25, 2010

nfs client hangs system for 3 to 5 minutes during boot, Does any one have any clues?

The last message before the hang is 'Starting NFS client services: sm-notify idmapd'.

My fstab looks like this:/dev/system/swap swap swap defaults 0 0
/dev/system2/swap swap swap defaults 0 0
/dev/system2/root / ext4 acl,user_xattr 1 1

[Code]....

View 2 Replies View Related

Ubuntu Servers :: Login Via SSH Without Typing Password?

Jun 21, 2010

How I can save my password so I don't have to type it in every time I log into my server? It's a real distraction.

View 1 Replies View Related

Debian :: Avoid Typing Firefox Master Password?

Aug 17, 2011

I have been looking at how to avoid typing my firefox master password. So far no luck.

Do you know of a way to have the master password in a file on a USB stick?

I am also looking for a way to integrate keepassx with firefox. I found passifox at[URL].. It depends on keepasshttp and seems to be a windows thing.

View 2 Replies View Related

Ubuntu :: Login - Load Up Without Typing In User Name Or Password

Jan 26, 2010

I accedently typed in a command in the terminal that made my computer load up without typing in user name or password. i would love you have that back. is there a command that you can use to get back there login screen. i am using ubuntu 9.10. i also dont know what the command was that i typed...

View 1 Replies View Related

Ubuntu :: Avoid Typing Password On Every Admin Action?

Jul 15, 2010

How can I avoid typing a password on every admin action? example when i install a program.

View 7 Replies View Related

Ubuntu :: Run A Script That Needs Root Privileges Without Typing In The Password?

Mar 25, 2011

I'm trying to run a script that needs root privileges without typing in the password. I want to copy a file from my documents folder into /etc/X11 to overwrite my xorg.conf. I do this because I will have my computer switch from my monitors to my TV when I watch a movie. But I'd like to be able to make it a clickable icon so I don't have to type in cp /... /etc/...

This is my "script"

Code:

sudo cp /home/nertskull/Documents/xorg.conf_TV /etc/X11/xorg.conf

Then I read a lot of places that said to add this to the sudoers file (sudo visudo)

Code:

nertskull ALL = NOPASSWD: /home/nertskull/Documents/switch_TV.sh

I've done all that, and I still get asked for my password when I run that file.

nertskull ALL = ...
%nertskull ALL = ...
%users ALL = ...
%admin ALL = ...

I'm sure it's something simple I'm overlooking, but I've read 5 different threads on this, and I can't find anything they did that I'm not doing. Also, here is my sudoers file, because I know location within the file matters. But what I read said I should be putting my stuff at the end.

Code:

# /etc/sudoers
#
# This file MUST be edited with the 'visudo' command as root.
#
# See the man page for details on how to write a sudoers file.

[code]....

View 6 Replies View Related

Ubuntu Installation :: Shutdown After Typing Password To Upgrade?

Apr 28, 2011

my laptop is shutting down after i type in the password to start the upgrade.

logs:

syslog

WARNING: Could not launch application 'gnome-user-share.desktop': Unable to start application: Failed to execute child process "/usr/lib/gnome-user-share/gnome-user-share" (No such file or directory)

auth.log

administrator : no tty present and no askpass program specified ; TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/shutdown -h now

same thing is happening when i start synaptic.

View 3 Replies View Related

Fedora Networking :: Connect The Network Where The Openvpn Client Is,throught The Computer With The Client To The Other Network?

May 20, 2009

I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface

View 2 Replies View Related

OpenSUSE Network :: Setup As A Network Boot Server To Install Solaris 10 On A Sun Ultra 10 Client?

May 12, 2011

I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?

View 3 Replies View Related

Ubuntu :: See What Time Unlocked The Lock Screen (by Typing The Password)?

Feb 24, 2011

Is there a way to see what time I unlocked the lock screen (by typing the password)?

View 5 Replies View Related

OpenSUSE Network :: Login Uses Local Password Instead Of Nis Password?

Jul 2, 2011

I have setup a nis server and client. At first I didn't have a local user defined on the client. The client then used the user and passwords from NIS, so that was ok.

The problem then is, that when the server is down, I couldn't login to my client anymore. So I created a local user with the same name on the client but with a different password (after I shut the nis server down, if nis server was on, I couldn't create a local user with the same name). I then edited etc/nssswitch.conf as follows:

Code:
# (like no NIS server responding) then the search continues with the
# next entry.
#
# Legal entries are:
#
# compat Use compatibility setup

[Code].....

If NIS server is on: client has to login with the nis password If NIS server is down: client has to login with the local password (as fallback)

However the actual behaviour is that I can only login with the local password now. The NIS pasword doesn't seem to be used anymore.

View 3 Replies View Related

OpenSUSE Network :: AT&T Global Network Client Not Connecting?

Mar 1, 2010

I recently ran into a problem with my at&t vpn connection. I'm hoping someone in this forums may be able to help? It's been working beautifully then one day it just wouldn't connect. I'm wondering if AT&T may have something to do with this...? I have tried reinstalling agnclient-1.0-2.0.1.3000.i386.rpm and agnSUSE10Prep-1.0-2.i386.rpm but nothing seem to work.I'm running Linux 2.6.31.12-0.1-desktop i686System: openSUSE 11.2 (i586)KDE: 4.3.5 (KDE 4.3.5) "release 0"

View 2 Replies View Related

General :: Log On Automatically To Remote Server Without Typing Everytime Password And Login?

Mar 24, 2011

i need to connect to a remote linux server on certain times (automated), but i need to log on to the server. So i want to make a script (shell perhaps) that periodically connects to the server and checks some files and folders.How do i automate it and how can i log on automatically to the remote server without typing everytime the password and login (the script should do it himself)

View 14 Replies View Related

Ubuntu :: Click On A Text Box To Write And Star Typing Only To Find Out Typing Somewhere Other Than Where Clicked?

Jun 17, 2010

Half the time I click on a text box to write and star typing only to find out I'm typing somewhere other than where I clicked.It's not dwell click and the active text box seems to be related to mouseover.

View 2 Replies View Related

OpenSUSE :: Mc Hangs Temporarily When Network Is Down?

Mar 3, 2011

Midnight Commander startup is usually instantaneous, but when the network (eth0) is down, mct takes over a minute to start.This is a known problem. See:#40 (savannah: MC doesn't open if network gateway inaccessible.) (07 Jan 2007)for example. The problem seems to be caused by mc's use of samba. Is there a known solution or circumvention? The above file advises me to "comment out the eth0 interface from the smb.conf "; however, my /etc/samba/smb.conf seems to have no eth0 interface.The "man mc" file mentions that "smbfs" is one of the virtual file systems used internally by mc. I tried reducing the "vfs" timeout in the ".mc/ini" file from 60 to 5, but this had no effect on the startup time.

View 5 Replies View Related

OpenSUSE Network :: Network Login Starter - Set Up A Server - Centralized Username And Password

Jan 21, 2010

I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.

Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.

What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication

Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").

So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.

I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.

View 2 Replies View Related

OpenSUSE Network :: The Browser At The XP Client Doesnt Find The Opensuse Through The IP?

Dec 15, 2010

The putty connection is ok, FTP also. Apache is on. Could be something at the firewall?I am trying with the IP and a directory at lampp/htdocs.

View 3 Replies View Related

OpenSUSE Network :: Novell Iprint Client On OpenSUSE Fails

May 10, 2011

Trying to install the Novell iprint client but got the following error message:

My system specifications are as follows:

View 6 Replies View Related

OpenSUSE Network :: 11.3 And Openvpn Connection Hangs

Aug 6, 2010

I have freshly installed OpenSUSE 11.3 64 bit and reimported my old openvpn connections via Network Manager. Connection can be established fine, but after 3 to 6 seconds (pings) it will stop to receive any packets on the tun device.

I tried disabling the firewall, starting openvpn manually, no avail. I checked the message log and the openvpn output, no messages recorded.

View 1 Replies View Related

OpenSUSE Network :: KDE Hangs When Peer On Nfs Is Offline?

May 27, 2011

I have a couple of nfs shares which I configured through the yast NFS client module. It entered these in my fstab file to start on bootup. A sample entry is:

10.2.1.30:/home/opt/Cindy/homenfsdefaults 0 0

As long as the foreign computer is online all is well. If the foreign computer is taken off line, soon after KDE applications such as Dolphin and the panel freeze, even if I am not using the shares. When the foreign computer comes online again, everything unfreezes on my computer and works fine. Likewise, if the other computer is not online when I boot, there is a long delay while the system waits for the share to come up. Is there something in my configuration that I can change to stop either or both of these problems? I am running 11.4 x86_64 on a wired network with static ip addresses.

View 9 Replies View Related

OpenSUSE Network :: Client Of More Than 1 NIS Domain?

Oct 7, 2010

I'm trying to set up an openSUSE 11.2 host as NIS client and I would like to knowwhether or not it can be client of two (or more) NIS domains. The reason is thatsome users are authenticated on server1 (nis-domain1) and some others on server2(nis-domain2).Trawling the web, I found a HP document stating that a client can belong to one NIS domain only. However, the yast NIS client interface allows adding NIS domains/servers to the seemingly default one. I'm totally confused.I made the following experiment:1. declaring nis-domain1 in /etc/defaultdomain and server1 in /etc/yp.conf: ypwhich returns server1, ypcat passwd lists the users on server1.2. in the yast interface, I added nis-domain2 and server2; in /etc/yp.conf, there is an extra line "domain nis-domain2 server server2". After reboot, ypwhichreturns server2, ypcat passwd lists the users on server2. But now the maps from server1 are no longer available.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved