OpenSUSE Network :: Network Manager Is Not Present In Tray Bar After Upgrading Gnome 3?
Jul 23, 2011
I tried to install suse 11.4 on the new gnome desktop 3. everything seems to work except the network manager. Is not present in the bar and I can not restore it. tried to reinstall network manager but to no avail.Does anyone know how I could solve this problem
openSUSE 11.4 | SUSE Linux | Beginner's guide to multimedia codecs MP3 DVD 3D nvidia ati wireless wi-fi netbookplease see the second image under wireless driver installation in above link.it is a image of a network manager when we clicked the network manager icon in system tray.but i am not getting the like that.if i click that icon i will see only a small window only with enable networking,enable wireless and manage connections only.how to get a detailed windows like that in the image.
I want to use my laptop to share network for VoIP adapter. I'm using mobile stick as well as wi-fi and Network manager under Gnome 3. Voip adapter asks for address via DHCP to gain the access to the server some where in the other side of the world.
I am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
I have an Atheros ar5007eg wireless card, and I haven't had problems with this card in GNOME. However, when I made the switch to KDE recently, I can't connect to any wireless networks. A wired connection works fine (that's how I'm writing this), but when I try to connect to any wireless network, it hangs at Acquiring IP Address, then asks me for my WEP key again, I enter it, and the process starts over. I tried using WICD, but I'm not sure if I set it up properly.
I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
I am using an Acer Aspire 5536 AMD dual core laptop with a 64bit installation of Susie 11.4. Using 11.2 I had no problems connecting to the wireless router. As soon as 11.4 was installed, clean install, and the laptop rebooted, network manager failed to start, until manually invoked and then enabling networking through the system tray. Even after this it will not connect to a wired or wireless network sometimes for more than 30 minutes.
I recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
When I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.
I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.
Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.
I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).
I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.
I m nokia mobile to connect to internet in 11.2 configured it all in n/w manager with phone number *99#
APN: XYUX(as given by provider)
Also wrote the dns in resolv.conf but all in vain . it is not connecting neither dialing any number just shows "activating" but with no progress earlier in 11.1 i used kinternet (but i couldn't find it here) is there not any other dialer ? as i ve heard that n/w manager is quite troublesome.
All settings are correct as far as i can tell. The wep key works on all my windows boxes. When i have connect automatically enabled it never tries to connect. if I go to edit it it pops kde wallet up i put in credentials. wallet goes away then nothing happens. if i double click connection to my router also nothing happens. I have the wep key in there and i even made it visible to make sure.
I have just installed opensuse 11.3. I am absolutely new for Linux and for this forum. I have tried to open Network manager to configure my wlan. But its not starting. How to start network manager and configuring my wlan.
I mistakenly delete my default panel. How to add the network notifier? Tried to look for the widget but nothing? i need to choose my network connections. And when i look at the Network manager my wireless if black ? It means it didn't detected my wireless?
I'm putting a opensuse 11.4 64 bit KDE install on an HP -G62 laptop.
I also use an NFS network.
I want to use a wireless network.
The problem is that network manager keeps insisting on asking kwallet for permission to start up the network. As a consequence boot hangs because the nfs network can't find the files in /etc/fstab because the network can't start because you can't see kwallet until it finishes booting.
I have options set in networkmanager to store the password in connection secrets in secure storage, and it insists on asking kwallet!
I don't want to get rid of kwallet because it's very useful otherwise - just not at boot time?
I have a problem with Opennebula that I have been trying t o solve for weeks, I have tried many options and have got nowhere. I have two HP ML115 servers configured to act as opennebula cluster nodes named opennebula01 and opennebula02. I have also installed the Front-end opennebula management deamon on node opennebula01. To use opennebula I have created a paswordless oneadmin user which seems to be ok because I can ssh to localhost and both nodes without a password. Using the onehost command I have created two hosts both tehse hosts are running correctly. See Example1.
Periodically the opennebula monitoring system will fail, the problem I am having is that the logs keep showing the message: "sudo: no tty present and no askpass program specified" See example2 I have used the visudo command to change the sudoers Defaults visiblepw option but I just get a "root's password:root's password:sudo: pam_authenticate: Conversation error" error. See Example 3 and Example 4.
Example1 ======== oneadmin@opennebula01:/srv/cloud/images/ttylinux> onehost list ID NAME RVM TCPU FCPU ACPU TMEM FMEM STAT 0 opennebula01 0 0 0 100 0 0 on 1 opennebula02 0 0 0 100 0 0 on
Example 2 ========= Tue Mar 16 23:16:10 GMT 2010 linux@opennebula01:~/Desktop> su oneadmin Password: oneadmin@opennebula01:/home/linux/Desktop> tail -f $ONE_LOCATION/var/oned.log tail: /srv/cloud/one/var/oned.log: file truncated Tue Mar 16 23:29:44 2010 [VMM][I]: Loading Virtual Machine Manager drivers.....
Example 3 ========= sudoers # Comment out the preceding line and uncomment the following one if you need to use special input methods. This may allow users to compromise the root account if they are allowed to run commands without authentication. #Defaults env_keep = "LANG LC_ADDRESS LC_CTYPE LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_ALL LANGUAGE LINGUAS XDG_SESSION_COOKIE XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER" #Defaults visiblepw
# In the default (unconfigured) configuration, sudo asks for the root password. # This allows use of an ordinary user account for administration of a freshly installed system. When configuring sudo, delete the two following lines: Defaults targetpw # ask for the password of the target user i.e. root ALL ALL=(ALL) ALL # WARNING! Only use this together with 'Defaults targetpw'! # Runas alias specification # User privilege specification root ALL=(ALL) ALL # Uncomment to allow people in group wheel to run all commands # %wheel ALL=(ALL) ALL # Same thing without a password # %wheel ALL=(ALL) NOPASSWD: ALL # Samples # %users ALL=/sbin/mount /cdrom,/sbin/umount /cdrom # %users localhost=/sbin/shutdown -h now # Added for opennebula to allow oneadmin to execute xen commands %xen ALL=(ALL) NOPASSWD: /usr/sbin/xm * %xen ALL=(ALL) NOPASSWD: /usr/sbin/xentop *
Example 4 ========= Tue Mar 16 23:49:20 2010 [InM][I]: Monitoring host opennebula01 (0) Tue Mar 16 23:49:20 2010 [InM][I]: Monitoring host opennebula02 (1) ..... Conversation error Tue Mar 16 23:50:22 2010 [InM][I]: /tmp/one-im//one_im-0ed949a4bd6f9d3a8e845559ac44e11f:70: undefined method `-' for nil:NilClass (NoMethodError) Tue Mar 16 23:50:22 2010 [InM][I]: ExitCode: 1
The network manager will ask me for my security key and it will not accept it. Instead when I use the show password feature to see what I typed in was correct, it shows something completely different than what I typed. For instance if my Key was :when it pops up and ask to for me to retype it again it shows something completely different in hex. Is there anyway I can use a different network manager?
the thing is that I cant use Network Manager to connect to Internet, because it simply do not connect. The connection, although, awailable throught yast when i choose "traditional method with ifup", so everything is just fine, but if i need to reconnect, i have to reboot. How do I setup a !working! connection through Network Manager, or maybe i do not do something properly.
I'd like to have a set up where my Ethernet card has a static IP set up but my WiFi card doesn't.Currently I have a profile for this set up in Network Manager, however on boot up and every time I replug the cable Network Manager chooses the default "auto eth1" profile. I manually have tochoose my own profile for the Ethernet card every time. How can I make it default??I know the workaround would be to use ifup but then I lose the ability to quickly change access points for my WiFi card so that's not a solution for me
How do you mannually set up a network using Yast/ifup? I'm trying to get my wireless running on a Broadcom 1390 WLAN. I've gone through the stickies in the wireless forum (this is my first stab at Linux) and have gotten the drivers installed and the internet working (albeit intermittently) using Knetwork manager. It seems that some folks that have had the same issue did not have problems setting the network up manually with Yast & ifup. I've disabled network manager in Yast, and I went through man ifup. It seems I need a "pre-configured interface," but I don't know how to make that happen.
I upgraded from 11.2 to 11.3 and works great except two problems.
1. it was installed on Thinkpad W500, and its sleep mode doesn't work, the computer cannot wake up from sleep mode.
2. After a hard reset due to stuck at sleep mode, the KDE network manager couldn't find any network interface anymore, even I tired to disable and enable "user Controlled with NetworkManager in Network Settings, still same problem. it always say "network management disabled" regardless the network manager checkbox status in Network Settings. On the other hand, Traditional Method with ifup can detect the my wireless and ethernet ports and work under ifup method.
so does anyone has idea about 1. how to configure the sleep mode for laptop? 2. how to bring back the network manager again? (I have "user controlled with network manager" checked in network settings.