When logging in to a remote server and starting Nautilus, I then want to add and bookmark an ssh connection to another remote server. I get an EM 'cannot find the location' and when going to 'network locations' EM 'Nautilus cannot handle network locations'. I 've been googling for a few hours, and found a lot of threads that point to gvfs, to samba and to rebooting and reinstalling. Rebooting I did, reinstalling is not possible,the gvfs thing is very unclear. There was an Em on the command line when starting Nautilus: "share extensions disabled", I got rid of that by uninstalling nautilus-share-extensions. Opensuse 11.2 fully updated, running as Kiwi-Ltsp server.
I am trying to view a share I have on a windows computer but nautilus claims it can't handle that. I tried it in dolphin and found the file but when I tried to open it gedit claims it cannot handle smb locations either!
Last night I used Nautilus to FTP a couple of files to my web-site, it worked fine and I created a bookmark for it. Today, with no changes to my system, it refuses to do it showing the error message in the title of the post. I thought that maybe my bookmark was corrupted so I tried File>Connect to Server using FTP with login. Just after entering my password I get the error message. I'm using Maverick. My Internet connection is working well. What the heck is going on?
I am experiencing weird problem with Gnome 2.30.2 on my Debian installation. I can't open "Computer" from places, also, partitions which are not explicitly defined in fstab are not mounted automatically.
I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
I currently have a home network setup so that my main machine shares it's external hard-drive via NFS. This has been working perfectly for months, however I just got a new laptop, installed openSuse 11.3 x64 and set everything up. Now there is two folders on the external network mount that won't let me do anything and always just return Networking: Stale NFS File Handle. The system still works fine under my old openSUSE 11.2 x86 laptop. I have tried unmounting the drive from the laptop, restarting the NFS client, and restarting the NFS server on the main machine. None of these have made a difference.
It is only these two folders that are effected. Everything else works just fine.
I WAS using opensuse 11.1 with gnome networkmanager and vpnc. I am NOW using opensuse 11.2 with gnome networkmanager and vpnc.When vpn concentrators are configured, they are configured with 'split horizons' (or not). If not, a default route is required from the client to pass ALL client traffic through the vpn connection. (when the connection is established, the vpn client replaces the default route on the client machine to point to the host site) If 'split horizons' is enabled, only the traffic bound for the host site is passed through the vpn connection.
What I have noticed, is since I installed 11.2, the vpn client is NOT enabling split horizon on connections that call for it. In stead, it is putting in a default gateway every time. This is a big problem, because for those sites that are configured for split horizon, doing this means that no Internet traffic will pass unless you manually adjust the route table.
I want to share my WiFi internet connection over LAN, so I'm trying to set up IP forwarding. An old tutorial tells me to go to Network Settings in YaST to do this, but that applet says that NetworkManager is now handling all of that stuff.How do I enable IP forwarding while NetworkManager handles my internet connections?
I get a Mount,Computer location error and will not mount any drives but boot! When I go to places->Computer on Linux Ubuntu 9.04 and I compiled gmp-4.3.1 and mpfr-2.4.1 last because I wanted gcc-4.4.1 to code and will not compile also gcc error not installed gmp-4.3.1 and mpfr-2.4.1. On screen is...
Could not Desplay "computer:". Nautilus cannot handle "computer" locations
On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
I setup the hostname for my linux machine to Linux. If I try ping Linux from the same computer it works. If I try from another computer inside my network the host can not be resolved. If I ping the IP from another computer it works.
I take a look in my router at DHCP client list and my linux machine doesn't have the Hostname set up.
How to broadcast the hostname to the entire network?
I just installed open Suse 11.3, and I cannot SSH my school. Upon further investigation I could not even ping any machines outside my local area network. Ironically I could nmap machines outside my local area network.
I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -
cups:/usr/share/cups/banners # cups-config --version 1.3.9 cups:/usr/share/cups/banners # cat /proc/version Linux version 126.96.36.199-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.
2. LINUX - LINUX Printing - OK LINUX - WINDOWS Printing - OK WINDOWS - LINUX Printing - NOT OK
While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.
After installing 11.4, I need to type in the command to update the firmware for a broadcom wifi adapter. Then I needed to reboot, twice, before the system knew to use the adapter (where the adapter wifi light goes from orange to blue).
Then I needed to add my wireless network and type in my key. But the key does not take. If I click on my wireless network icon, it just re-asks for the key and does not connect nor give any other message. Network icon continues to display no connection.
So I need to reboot again.
When the system starts again, the adapter is blue, I click on the icon for my wifi network and it connects without asking for my key and I can then set to start my wifi by default.
I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.
I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.
As a consequence all network services are not working. I can't connect to any other machine nor to the internet.
I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.
Any suggestions how to make it work again? I'm using Suse 11.3.
I am using an Acer Aspire 5536 AMD dual core laptop with a 64bit installation of Susie 11.4. Using 11.2 I had no problems connecting to the wireless router. As soon as 11.4 was installed, clean install, and the laptop rebooted, network manager failed to start, until manually invoked and then enabling networking through the system tray. Even after this it will not connect to a wired or wireless network sometimes for more than 30 minutes.
I tried to install suse 11.4 on the new gnome desktop 3. everything seems to work except the network manager. Is not present in the bar and I can not restore it. tried to reinstall network manager but to no avail.Does anyone know how I could solve this problem
This is a thread I've moved over from the install forum and is hopefully more focused. Sorry if I have violated some protocol. Problem I have a new machine build configured to dual-boot Windows 7 and OPENSUSE 11.4. Network performance in Windows is very good but network performance in OPENSUSE is very poor.
I recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP