OpenSUSE Network :: Crash Of NIC Cause Of Kernel?

May 9, 2011

Since I updated the Kernel I have the problem that the NIC crashes, with following failure:

May 9 08:53:26 server kernel: [ 292.704044] ------------[ cut here ]------------
May 9 08:53:26 server kernel: [ 292.704054] WARNING: at /usr/src/packages/BUILD/kernel-desktop- dev_watchdog+0x233/0x240()


View 6 Replies


OpenSUSE :: Network File Transfer Crash

Dec 18, 2010


- Intel P4 3.2GHz
- Gigabyte G32M-S2L
- 3 x 1TB RAID5 (MDADM)
- 1 x 1TB OS Drive

New Linux user here. I'm running 11.3 x64 gnome (runlevel3) on my headless home file server. I've mounted my RAID array onto /shared and have setup samba (through Yast) for file sharing. However I am having an issue when I transfer multiple small files over the network (i.e music) it will crash the box. I am unable to reach it through ping or SSH. It is also physically unresponsive where by connecting a keyboard or mouse to the system will not work.

Looking through /var/log/messages does not indicate any sort of issue. I've tried turning off unnecessary programs (rTorrent etc) to make sure it isn't overloading the connections however the box still crashes. Although transferring files locally from HDD to HDD does not crash the server.

View 9 Replies View Related

OpenSUSE Network :: DNS Resolution Fails After Crash?

May 20, 2011

My laptop, running OS114, crashed today b/c it ran out of battery. Apparently, apart from the partial loss of an important document, this has wreaked some part of OS.

I can connect to the network w/o problems i.e. I can access the router over it's IP.

I can not, however, open any site in any browser. pinging them does not work too.

the /etc/resolv.conf is blank up to the standard notes from the OS developers. That is, there are no relevant entries there.

I'm using KDE 4.5 with KNetworkmanager, but neither did I find any solution while looking through the menus of KNetworkmanager, nor in Yast "Network".

View 3 Replies View Related

OpenSUSE Wireless :: Network Manager Crash During Edit Connections?

Mar 24, 2010

Every single time I enter the network manager to edit connections is crashes on exit. I am running opensuse on an Asus eee PC 1000HE with an Atheros network card. The crash report follows :

Distribution: openSUSE 11.2 (i586)
Gnome Release: 2.28.2 (null) (SUSE)
BugBuddy Version: 2.28.0
System: Linux #1 SMP 2010-03-16 21:25:39 +0100 i686


As an extra point. I wish I could disconnect individual networks instead of just disabling networking to disconnect. I think the newer version of the network manager does this.

View 3 Replies View Related

Programming :: Netlink Sockets In Kernel And Ethernet Driver - Kernel Crash

Aug 31, 2010

I write the network driver. Transmission of packets in user space I do through netlink socket`s. In user space there is a handling of packets and their transmission on other device (however, it isn't important).

Problem in that any time, packets through the driver in system, and is reverse, are transferred normally. But then there comes the moment when the kernel crash. If to look in syslog it seems to me that comes deadlock. Also I think that it is related with netlink socket`s.

I can't find the information on that anywhere how correctly to use netlink socket`s in kernel space. Can at you will any a reason into the account of synchronization of sockets and the driver in kernel space?

I can give the driver code if it is necessary.

View 2 Replies View Related

OpenSUSE Network :: TCP Kernel Msg Changed In 11.2?

Jan 2, 2010

in 11.1 (2.6.27*) there were occasional kernel msgs generated in the "messages" log:May 26 21:57:28 blkdragon kernel: TCP: Treason uncloaked! Peer shrinks window 2778476289:2778478629. Repaired.had to do with torrents/java and azureus/utorrent, with the outside ip number/port assignments easily understood and parsed if 11.2 ( the same type of entry is:00:24:23 blkdragon kernel: [258668.819024] TCP: Peer 0000:0000:0000:0000:0000:ffff:54b6:489e:10858/44949 unexpectedly shrunk window 3076383191:3076383869 (repaired)

View 4 Replies View Related

OpenSUSE Network :: Kernel Update Killed Net?

Mar 24, 2010

I am experiencing the "slow internet" problem (mentioned multiple times in these forums) but it started exactly when I ran an online update, which switched my boot image from vmlinuz- to vmlinuz- Perhaps a setting somewhere got overridden? When the update occurred, grub couldn't find the OS because it had the wrong version #, and I manually edited it (via a livedisk) and that fixed it; it also switched my vga resolution in the grub conf. OpenSUSE is *acting* like ipv6 is enabled again, but ifconfig doesn't report that, and my MTU is close to 1500.

View 6 Replies View Related

Fedora :: Kernel Crash In F14 64 Bit / Solve This?

Dec 26, 2010

The best word that suits me to introduce is I am a novice! :-) but it is the difficult part get over with the new things and learnings!

Well once such situation made me introduce me to you is "Kernel Crash". I've recently installed Fedora 14 64 bit version on my HP HDX premium series, since then this Kernel crash is chasing me down! code...

View 2 Replies View Related

Ubuntu :: 9.10 Custom Kernel V.2.6.33 Crash?

Apr 2, 2010

I wasn't using my laptop for at least a few hours, but when I looked at it, it had seemed to crash. I am hoping to figure out what caused this, and to prevent it from happening again. I believe it has something to do with drm or b43 as that is what I could decipher from the screen. I have checked some logs and found nothing irregular. I do not want this to happen again. I am running kernel with no patches and a custom config tailored to my processor. The reason I am running is because of support for my Wifi.

View 5 Replies View Related

General :: Kernel Crash After Install / Fix It?

Jun 25, 2011

After installation of Red Hat Linux Enterprise Server 5 on to my desktop computer
i got d below error and it can not booting to next screen, on da sreen displaying dat, code...

memory for crash kernel (0x0 to 0x0) not within permissible range

View 5 Replies View Related

CentOS 5 :: Livecd Kernel Crash Every Day

Nov 29, 2009

I using only Livecd CentOS 5.4 and my system crash in day about ~3-5 times , so I tired and want to know why this happen. (before I used live-cd 5.3 about 3 weeks and this problem still was. info : Linux livecd. localdomain 2.6.18-164.el5 #1 SMP Thu Sep 3 03:33:56 EDT 2009 i686 athlon i386 GNU/Linux.I load system perfect and If I just browsing then I will have crash after 5 hours latter , but if I install wine , xmms,lame,xmms-mp3,k3b-mp3,flash-plugin and after installing software I will look movies from internet , or lisining music on xmms mp3 format - my system UPTIME max will be ~30 minutes or less..And I want to ask, or in Live-cd I can start Firewall ? Becouse I think it's not started and then I try to ENABLE its looks like not responding.

View 1 Replies View Related

OpenSUSE Network :: System Freeze After Last Kernel Update ?

Jan 4, 2010

After last kernel update ( when I try to connect to access-point my system freeze.

I use realtek network card (rt2860sta module).

View 9 Replies View Related

OpenSUSE Wireless :: Add Network Card Support To Kernel?

May 18, 2010

I'm using asus usb n-11 wireless adapter.Default kernel module drivers/staging/rt2870sta.ko hasn't id of my adapter. Please add this two strings to next kernel release

--- drivers/staging/rt2870/rt2870.h 2010-05-18 13:09:13.262882659 +0400
+++ drivers/staging/rt2870/rt2870.h 2010-05-18 12:10:20.000000000 +0400
@@ -85,6 +85,8 @@


View 2 Replies View Related

Fedora :: Keep Getting Notices That There Is Some Sort Of Kernel Crash ?

Nov 25, 2009

I just installed it on my ancient IBM T-42 thinkpad, and am completely satisfied.

However, I want to help fedora get better.

I keep getting notices that there is some sort of kernel crash.

See cut and paste below.

When I try to use the automatic bug reporting, it fails to do it.

I have attached a screenshot of what happens when it doesn't report it.

View 1 Replies View Related

Fedora :: Kernel Module Crash With Sound?

Dec 21, 2009

Sound disappears as soon as I try to use an application e.g. News Video Fox, CNN, BBC or playing a video disk or cd disk, and a kernel module crash is reported (listed below from logs) After this happens no sound, and the desktop freezes (X11 only Linux is fine). Restarting X obviously do not solve the problem.

It seems that Fedora 12 has sever problems with Intel Sound cards.

I guess it is not really a Kernel developers problem but more the authors for the sound module causing the crash. I already reported it through the popup to "kernel-oops" by clicking on the "black screen" popup reporting the crash on FC12.

Here follows the logs containing the crash info.

WARNING: at sound/pci/hda/hda_intel.c:565 azx_send_cmd+0x36/0x1df [snd_hda_intel]() (Tainted: G W )
Hardware name: Macmini2,1


View 2 Replies View Related

Ubuntu Installation :: Crash During 2.6.31-20 Kernel Update

Mar 8, 2010

Running Karmic on my laptop, I get very occasional kernel panics (suspect it has something to do with the Broadcom WiFi because it only seems to happen with heavy network traffic or HDD access), but just my lucky, this time it Panic'd on me during my recent update -> linux-kernel 2.6.31-20. My system still 'works', but I get the following when doing any other updates, now:

sudo dpkg --configure -a
[sudo] password for tango:
Setting up linux-image-2.6.31-20-generic (2.6.31-20.57) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing linux-image-2.6.31-20-generic (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of linux-image-generic:
linux-image-generic depends on linux-image-2.6.31-20-generic; however:
Package linux-image-2.6.31-20-generic is not configured yet.
dpkg: error processing linux-image-generic (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of linux-generic:
linux-generic depends on linux-image-generic (=; however:
Package linux-image-generic is not configured yet.
dpkg: error processing linux-generic (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:

Now I cannot seem to get rid of that, and of course, I am stuck in the prior version. Granted everything 'works' - but it bothers me. What's the best way to go about tracking down and hashing out a problem like this?

View 4 Replies View Related

Debian :: Liquorix Kernel 2.6.36-2.dmz.2 686 Icedove Crash

Dec 20, 2010

I'm using Squeeze and icedove and iceweasel and I've installed the package linux-image-2.6.36-2.dmz.2-liquorix-686. It works fine on my Dell 1521 Inspiron laptop with only one exception. If I'm surfing the web or checking my mail via a wired internet connection I'm fine... if I'm surfing the web or checking my mail via a wifi connection everything is fine... but if I happen to forget to connect to a wifi connection, and I'm in a situation where a wired connection is not available, I can start iceweasel (it doesn't do anything constructive), but checking my mail with icedove (simply starting the program) crashes my computer.

If I boot up with the 2.6.32-5 kernel, the one that's in the regular debian repository, I can not duplicate the crash. Somewhere I read that the liquorix kernels are optimized for a desktop computer. Is this my problem? Is it something else?

During the crash my screen goes to a text console and I see syslogd messages on the screen -- which I cannot reproduce here.

View 3 Replies View Related

General :: Kernel Dumps To The Wrong /var/crash?

May 2, 2011

I'm running Scientific Linux 5.5 (equivalent to CentOS 5.5), and over the past two weeks, I have had a problem with my root partition filling up, preventing anyone from logging into the server.After searching for large files, and finding none, I was mystified when du told me that the root partition had only 660 MB of disk space used, whilst df showed it full. The problem was this: the /var/crash directory had been filled up by an 8GB crash file. Now, I'm a 'proper' sysadmin and make sure that /var has its own mount point, so the crash should not have touched the root partition at all. Except it did - instead of writing to /var/crash on /dev/mapper/VolGroup00-LogVol04 which is mounted as /var, it wrote the file to /dev/md0 directly, so when all the file systems were mounted, those files were hidden under the mounted /var.

View 4 Replies View Related

General :: Segmentation Fault - Kernel Crash

Feb 24, 2011

My system is running with powerpc and linux, i am facing some kernel crash problem.

I have pasted the trace and log

(1) Display the backtrace for the thread that crashed.

(2) Display argument parameters and local variables for the thread.

View 3 Replies View Related

OpenSUSE Network :: Kernel Device Eth0,wlan0 Are Not Present?

Feb 27, 2011

I have installed Open SUSE in my DELL server which has 2 broadcom NIC cards, it showing both the NIC cards in Network configuration in YAST ,but it showing as not configured and not connected . Kernel device eth0,wlan0 are not present. In device manager also 2 Broadcom nic cards are detected.

View 4 Replies View Related

Fedora :: F14 Kernel Crash And Hard Freeze - Hang

Jun 9, 2011

I have a fresh installation from the demo ISO image of F14 running on an Acer TravelMate 4200. The system is a Dual Boot with win Vista. Windows Vista runs without any problems but when using F14 a kernal crash constantly occurs and it then hard freezes or hangs and the machine needs to be cold booted. There is nothing in particular that I am doing either, the problem happens when the machine is idol or when I am working in various apps.

The F14 system is completely up to date running kernel version The following error below is from the automatic bug reporting tool and I have reported this using the tool:

Package: kernel
Latest Crash:Sat 04 Jun 2011 14:55:00
Command: not_applicable
Reason: BUG: unable to handle kernel NULL pointer dereference at 000000f8
Comment: None
Bug Reports:

View 2 Replies View Related

General :: Unable Kernel Crash Dumps In Debian?

May 8, 2011

I want to enable kernel crash dumps for my Debian 5.0.7 machine. The kernel version is 2.2.26 amd64.How can I configure this?

View 1 Replies View Related

Ubuntu :: Crash In Kernel During Boot (but System Boots)?

Apr 27, 2010

I have a custom compiled kernel which seems to work OK. However, during boot, I get:

Apr 27 21:16:14 poni kernel: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:21:70:90:2d:6c
Apr 27 21:16:14 poni kernel: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet)


System continues to boot OK and everything seems to work fine as I expect. I am not sure what the above causes. It looks related to USB, but I am not sure. lsusb gives:

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


View 3 Replies View Related

General :: Memory For Crash Kernel Not Within Permissible Range?

Jan 18, 2010

How do I get rid of this message during boot. I have tried the system-config-kdump command but it gives me a "no command found" reply. I am using CentOS 5.4

View 1 Replies View Related

General :: Memory For Crash Kernel Not In Permissible Range?

Nov 24, 2010

I'm using centos 5.4 on an Hp Compaq 500B, 4GB ram,I have just installed centos when i try to boot the pc it says "memory for crash kernel not in permissible range, pci not using mmconfig" then it shuts down after a while.

View 1 Replies View Related

General :: Memory For Crash Kernel Not Within Permissible Range

Mar 18, 2010

I've installed LINUX for the very first time and when i rebooted it, i found this message on my screen "Memory for crashkernel notwithin permissible range" I tried all my attempt like given memory to kernel with this command "crashkernel=64M@16M" but no luck... Finally i tried to boot into single user mode might be it helped me..but same results

View 3 Replies View Related

CentOS 5 :: Memory For Crash Kernel 0x0 To 0x0 Error Message

Jul 30, 2009

After CentOS5.3 install to /sdb7 partition (on 2nd HD) and using Ubuntu Grub(on 1st HD mbr) to boot CentOS, I get "memory for crash kernel 0x0 to 0x0 not within permissible range" as soon as CentOS starts. I have 2G of ram. The message is on every boot. I've had several other linuxes on that partition without such an error message. Otherwise the OS starts fine. Is the message of concern/import?

View 3 Replies View Related

CentOS 5 :: Memory For Crash Kernel Not With In Permissible Range?

Jan 21, 2010

I just install CentOS 5.4.

The first message it gives after grub is Quote:Memory for Crash Kernel (0X0 to 0X0) notwithin permissible range

View 1 Replies View Related

OpenSUSE Network :: Latest Kernel Update Killed IPhone Tether?

Nov 23, 2010

I recently updated my kernel and now can no longer tether my iphone to my openSUSE11.3(x64) laptop. Before the update I could tether.Same machine dual boots to Win7-64bit and can tether just fine.I re-installed the libimobile packages, but my linux no longer recognizes the iphone as a network device.t DOES pop-up some boxes asking if I want to play the media, or view the photos on the iPhone - so that part is working

View 1 Replies View Related

OpenSUSE Network :: Strange Ifconfig Statistics For Eth0 With Kernel?

Feb 28, 2011

The computer and system in question is the laptop from my description and openSUSE 11.3 with a different kernel from this repository :[URL] to move this thread if it should reside in the beta/prerelease forums section. The IMHO relevant information about my hardware and system is shown below.

The kernel I'm using :

grzes@opensuse:~> Linux opensuse.local #1 SMP PREEMPT 2011-02-25 19:59:41 +0100 i686 i686 i386 GNU/Linux
The hardware and drivers I'm using :
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)


View 7 Replies View Related

Copyrights 2005-15, All rights reserved