OpenSUSE :: KDE Apps Fails To Start After Update

Feb 25, 2011

Since updating a few days ago I cannot start dolphin, digikam and a lot of other KDE apps any more. The error message from Dolphin is

dolphin: symbol lookup error: /usr/lib64/ undefined symbol: _ZN6Phonon11VideoPlayer5eventEP6QEvent
The versions are openSUSE 11.3 (64-bit) and KDE 4.6.

View 3 Replies


Fedora :: Amarok Fails To Start On 12 After Update?

Jul 15, 2010

I updated Fedora 12 a couple of weeks ago, and Amarok stopped working. The splash screen came up, and hung there until clicked on. Looking at the process, it uses 49-50% CPU (weird since it's on an Acer One netbook with an Atom N270 single core processor) and the memory footprint steadily increases. I hung on for another update to see if that fixed it, but one came through today with an update to Amarok, but it is still broken.

View 2 Replies View Related

OpenSUSE :: KDE: Apps That Not Start With Alt+f2

Aug 22, 2011

I have noticed that are a few applications (non part of the kde apps) that do not launch with alt + f2 (command name). Instead I have to use konsole first and write the command name, then the apps appears successfully.

The same problem I have of course with the same apps if I make a desktop shorcut. These apps never show up! Thus I would like to ask you what should I do to make these shortcuts and alt+f2 launches to work.

View 5 Replies View Related

OpenSUSE Install :: Online Update Fails To Refresh Update Repo?

Sep 21, 2010

when I launch Yast2 - Online Update, I get an error during the repository refresh that it could refresh the repository.Since it's easier to copy-paste - here is the output from 'zypper ref' with the same error:

Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata [|]
Failed to download ./repodata/cefcc9d56264aa169f70a53c560ffc39cb6af575-deltainfo.xml.gz


View 8 Replies View Related

OpenSUSE :: Package Manager Update Not Updating Apps

Aug 18, 2011

Was wondering if someone could suggest a reference and possible approach to troubleshooting openSUSE update. I'd always assumed that the openSUSE update (applet) would notify me and update any apps installed from any of the configured repositories.This week I found two applications were not detected and updated, one from the Pacman repository where an update was available for more than 2 weeks and another from the Contrib repository where an update was available for an unknown amount of time.I manually detected and updated both using zypper without any special repository configuration.The SUSE updater has been running regularly installing critical and recommended patches regularly without issue.Am considering

- Maybe somewhere there is a config specifying repositories and/or apps? I can't seem to find something that's applicable.
- Maybe I misunderstood that the SUSE updater isn't supposed to update anything from non-OSS repositories?

View 9 Replies View Related

OpenSUSE :: DBGL Fails To Start?

May 16, 2010

I have a problem with DBGL (DosBox Graphic Launcher), after installation through Yast I got the icons alright but when clicked they just bounce for some time and then nothing, the program DBGL doesn't start, while DosBox alone works o.k.

Running DBGL in Terminal gives me this:
starting ...
java virtual machine used: /usr/lib/jvm/jre/bin/java
classpath used: /usr/share/java/hsqldb.jar:/usr/share/java/liquidlnf.jar:/usr/share/java/swt/swt-gtk-


View 3 Replies View Related

OpenSUSE :: 11.3 - KDE - Konsole Fails To Start (Ever Again) After First Use?

Jul 19, 2010

Konsole (when in root) fails to start up after it is used once (i.e., opened, work performed, closed/terminated). Bouncing cursor does its thing on second and subsequent uses, but times out normally and Konsole window never appears. Stock install from DVD.

View 6 Replies View Related

OpenSUSE :: Virt - Manager Fails To Start?

Jun 18, 2011

My first post on openSUSE, since migrating from Ubuntu (didn't like Unity!). I've installed the virtualization packages from YAST2 and when I attempt to run virt-manager, it crashes. The error is
Code: could not import gobject (could not find _PyGObject_API object) I've searched both these forums and via a general Google and although I've found posts, all of them are apparently resolved - but not mine.

My laptop is fully up to date and running Gnome 3 on openSUSE 11.4.Has anyone else come across this lately?

View 1 Replies View Related

OpenSUSE :: Nautilus Fails To Start - Doesn't Display Anything

May 26, 2010

I have recently disabled nautilus from showing up on my desktop. Now I can't seem to start nautilus. Starting it from gnome-terminal doesn't display anything, and it never shows, and it never terminates. The way I disabled nautilus from showing up on my desktop was by following Xmonad/Using xmonad in Gnome - HaskellWiki

View 5 Replies View Related

OpenSUSE :: KMail Fails To Start Due To Akanodi Not Starting

Jul 17, 2010

When trying to start KMail it attempts to start Akanodi, this fails and so does KMail.

The only solutions I could find are here: Akonadi 4.4/Troubleshooting - KDE UserBase

These did not work

Akonadi Server Self-Test Report:
Test 9: ERROR
Akonadi control process not registered at D-Bus.


View 3 Replies View Related

OpenSUSE :: Yelp Fails To Start: Could Not Initialize Gecko

May 13, 2011

On 2 fresh updated 11.4 (32 and 64 bit).


# yelp
Could not initialize gecko!
# rpm -qa | grep mozilla


I'm not using the mozilla repo.

View 3 Replies View Related

OpenSUSE :: GNOME 3 Fails To Work After Update

May 11, 2011

I have updated GNOME 3 and it no longer works. Having suspected extensions the problem I have manually uninstalled all extensions via command line. This got me to log in instead of the problem screen. However, the desktop is entirely unresponsive, after log in it no longer responds to anything, although the mouse still tracks.

View 9 Replies View Related

OpenSUSE Wireless :: Wifi Connection Fails After The Recent Update?

Jul 8, 2010

Recently I updated my openSUSE 11.2 and I'm not too sure what all were the recent updates but I suspect networkmanager also got updated. After I restarted my machine, my laptop fails to connect to the wireless access point. I tried both in gnome as well as KDE but the same error. This is the log I found in my /var/log/NetworkManager which I believe should give some pointers.

Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> Activation (wlan0) starting connection 'Buckeye Plaza'
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
Jul 8 15:08:42 AshSuse1520 NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...


I did a search of this error in google and all I got were few results which complained about bugs in some debian distro.

My wireless card works fine and so does the access point I try to connect to since my Ubuntu installation is able to connect fine as well as my windows Xp.

View 5 Replies View Related

OpenSUSE Install :: Bundle-lang-gnome 2233 Update Fails?

Jun 26, 2010

The automatic updater cannot install bundle-lang-gnome 2233: "A protected system package cannot be removed" ("Ein geschtztes System-Paket kann nicht entfernt werden.")Detail info: "Subprocess failed. Error: RPM failed: error: package bundle-lang-gnome-extras-de-11.2-19.21.1.noarch is not installed"

View 1 Replies View Related

OpenSUSE Install :: Login To X Session Fails After YaST Online Update

Jun 1, 2011

I got a workstation with openSuse 10.3 pre-installed. After I did the Online Update from YaST2 and rebooted the machine as requested by YaST2, the system came to fail starting up an X session.

Below are excerpts of the message appeared on the screen at the end of the boot process. (I transcripted it from the screen by hand.)

Waiting for mandatory devices: eth1 __NSC__
10 9 8 7 5 4 3 2 1
eth1 devices: Intel Corporation 82573L Gigabit Ethernet Controller
eth1 DHCP4 client (dhcpcd) is running


what is causing the failure of the X session and how to fix the problem? I would be glad if you give me any hints or pointers.

View 9 Replies View Related

OpenSUSE Install :: Update Fails - Loop - Flash Player - Yast2-core

Aug 27, 2011

I am trying to update Flash-player and yast2-core as prompted by today's update icon.

I am now faced with a loop that goes like this:
1) click on icon
2) window pops up, "2 packages selected"
3) click on apply, subwindow pops up
4) click on continue, "waiting for authentication"
5) after minutes of waiting, click on cancel, nothing happens
6) click on icon killing subwindow
7) now back to 2)

Aborting the process, starting at 1) again, same mess

a) No idea what was going on

b) Use Yast instead of clicking update icon

View 2 Replies View Related

Ubuntu Installation :: Adobe - When Click On Icon In Start Menu Or On Desktop It Fails To Start

Oct 27, 2010

I installed Ubuntu 10.10 64-bit, downloaded Adobe reader '.bin', from the terminal

It extracted and asked me for a installation location, to which i put [~]

It then finished the installation.

But when i click on the icon in the start menu or on desktop it fails to start, when i also click on a .pdf document it also fails to start!

View 2 Replies View Related

OpenSUSE :: After Update To 3.6.14 Firefox Cannot Start Application

Mar 2, 2011

I am using: Firefox 3.6.14 from buildservice. 3.6.13 from buildservice did work flawlessly. System 11.1 KDE3.5 release 21.13.1

Error message when starting from terminal:

user@linux-2c5j:~> firefox

Could not find compatible GRE between version and What I have tried: deinstallation of mozilla and reinstall. Does not change anything.

View 4 Replies View Related

OpenSUSE :: Jdownloader Dosnt Start After Update?

Jul 27, 2011

my jdownloader dosnt start after update. I use openSUSE 11.4Have yesterday chat with jdownloader support. Cant find the config file.I have to rename the config file in config.old

View 2 Replies View Related

OpenSUSE Install :: KDE / Xorg Don't Start After Update

Aug 15, 2011

this evening I updated my 11.4 via KpackageKit then logged out when I did Xorg died and I was dumped on the text console.

Looking in the logs I see

-- /var/log/messages
Aug 15 17:59:49 linux-vg3v acpid: 1 client rule loaded
Aug 15 17:59:49 linux-vg3v kernel: [22090.925299] NVRM: API mismatch: the client has the version 275.21, but


Unfortunately I didn't check the update list too closely. The above seems to indicate that an Xorg component was updated but the kernel module wasn't.

View 4 Replies View Related

OpenSUSE Install :: GNOME Didn't Start After Update To 11.2

Jul 14, 2010

yesterday I try to update my system to 11.2 After that my GNOME didnt start in automatic mode ( I`m not able to start GNOME by hanD) What I have to do?

View 9 Replies View Related

OpenSUSE Install :: 11.1 Post-software Update X Server Won't Start

Nov 7, 2010

I have been running OpenSuSE 11.1 with the proprietary VNIDIA driver for a year or so and recently upgraded my internet connection from slow old dialup. I installed some software upgrades this made possible but the process failed on some point (I didn't make a note of the details) and the next time I tried to log on it booted up to the CLI. I tried startx and got the message;

using config file "etc/x11/xorg.conf"
no devices detected
Fatal server error
no screens found
giving up
xinit: Connection refused (errno 111): unable to connect to X server


View 4 Replies View Related

Ubuntu Installation :: 10.04 Lucid Update Manager Fails To Update - Now 64 Days Out Of Date?

Jul 4, 2010

I am trying to update using Update Manager and I get this message: Failed to fetch "Failed to fetch [URL]..404 Not Found" My system is 64 days out of date now.

I have looked elsewhere for an answer and some others have had similar problems, but I have not found a reason for it happening, nor an answer. I wonder if anyone can help me please. I have been using Ubuntu for several months, can use the Terminal if I have the right commands to issue, but beyond that have limited knowledge of the system.

View 9 Replies View Related

Ubuntu Installation :: Using The Update Manager Fails And See The Message Cannot Update?

Oct 26, 2010

I'm having trouble updating. Using the update manager fails and I see the message:dpkg: parse error, in file '/var/lib/dpkg/available' near line 23288 package libbonoboui2-common': 'Conflicts' field, reference to 'libbonobous2-0': version contains ' '

I've tried
sudo dpkg --configure -a


View 1 Replies View Related

Fedora :: Start Apps On Other Displays?

Sep 5, 2011

On the other thread, we (read: me) went off topic of that request, therefor i want to make an extra thread for this. The request is quite simple.

1) When i login to my DE (LXDE) i want to have several applications start automaticly.. Status: Done.

2) Now, i want them to be started on other displays/desktop, the virtual desktop ones, those you access with ctrl+alt+arrowkey. Status: requesting

I had figured that there's an option to those applications i'd like to be started, display=.However, starting up these apps with the display argument, causes graphic errors on LXPanel and causes an error, rather than to be display on current desktop.


View 8 Replies View Related

Ubuntu :: Start Up Apps On Different Desktops?

Mar 9, 2010

Is it possible to have applications open on one of my other desktops instead of the main? Suppose I wanted to have a certain database-excel type or word document open everytime, or other programs that I need open but not cluttering my main desktop, can I do it?

View 2 Replies View Related

Fedora :: Xfce - Somes Apps Can't Start?

Jul 7, 2011

I installed xfce fedora 15, some apps can't start or take a long time to start, like catalyst control center (sometime start, sometime no) , ibus (take 3-5s delay), crossover games register (can't start)..

View 4 Replies View Related

Ubuntu :: Start 2 Apps On System Startup

Oct 28, 2010

I need to start vboxwebsrv and x11vnc on startup with a specific username.I tried entering the commands in rc.local as:/bin/su -c "/x11vnc -forever -usepw -httpdir /usr/share/vnc-java/ -httpport 5800" user1/bin/su -c "/usr/bin/vboxwebsrv -b" user2.But this does not start the app on startup.

View 2 Replies View Related

General :: Start Up With Same Apps As Previous Session?

May 29, 2011

Can fluxbox remember the apps that were running when it was shut down and reopen them when it is restarted?
If so, how?

View 3 Replies View Related

Ubuntu :: Can't Update Any Apps In 10

Mar 26, 2011

when i try to update any apps or updagrade 'em it doen't work for exmple if i wan to upgrade my firefox tp the new version look what i have :


sudo apt-get upgrade firefox
Reading package lists... Done
Building dependency tree
Reading state information... Done


View 5 Replies View Related

Copyrights 2005-15, All rights reserved