OpenSUSE Install :: Adding DVD's To Repository List?

Feb 7, 2010

I just purchased openSUSE 11.2 x64 on DVD from, as well as the 5 x64 repository DVD's. The base install went fine, but when I try to add thos's to my software repositories using yast they all have the same listed name, "repository" - I can change that to show "repository disk 1" etc, but when I go to install stuff and the software installer asks for "repository disk 1" I put that in the dvd drive, and it cannot recognise it, spits it out and asks for the same disk again...hmmmm. Should I not change the default name that comes up when each DVD is added to the list? If I leave them unchanged will I be told which is the correct disk to insert, remembering that in the list they all have the same name

View 8 Replies


OpenSUSE :: Attempt To Install VLC By Simply Adding The VideoLAN Repository To YAST?

Sep 22, 2010

If you attempt to install VLC by simply adding the VideoLAN repository to YAST, the version that's installed won't have audio.Follow the Zypper instructions on the VideoLAN website (bottom of the page)VideoLAN - VLC media player for openSUSE Be sure to specify 11.3 as described, and VLC will install fine.

View 7 Replies View Related

OpenSUSE Install :: Automatically Adding Local User To Xhost List?

Jun 8, 2011

On Ubuntu, the local user is automatically added the xhost list when logging in (via a script in /etc/X11/Xsession.d).

Is there a way to enable this in OpenSUSE?

(My original problem is that I cannot interact with a running X session when loggin in via SSH, since newer GDM versions don't create $HOME/.Xauthority any longer.)

View 9 Replies View Related

OpenSUSE :: Adding A Repository Via Term?

Apr 13, 2011

I wanted to add a repository so I took the steps of zypper ar -f ((repo directory)) and got:

zypper ar -f
If only one argument is used, it must be a URI pointing to a .repo file.
addrepo (ar) [options] <URI> <alias>
addrepo (ar) [options] <file.repo>


View 4 Replies View Related

OpenSUSE :: Kbibtex Editor - Adding Another Repository?

Dec 30, 2010

I was using Kbibtex under 11.2 on my Lenovo (32-bit) but YaST does not find it now that I have upgraded to 11.3. Perhaps it is as simple a matter as adding another repository. Can anyone clarify for me?

View 7 Replies View Related

OpenSUSE :: Choose Repository From The List?

May 28, 2011

I am confused by the repositories list from the community as following:

View 9 Replies View Related

OpenSUSE :: Adding User To Access Control List In Nautilus

Aug 13, 2010

I have a shared folder that has it's access restricted to certain users on a file server at work. Currently when I try to add a user I follow this process:
Right click the Folder, go to Properties
Click the "Access Control List" tab
Select a user from the "Participants List"
Click Add

For most users this process works fine but with one of them I get the following error:
"Could not add ACL entry: Invalid Argument"
I also tried a script that a former employee created which seems to employ this command:
setfacl -m u:<USER>:rw- <PATH>
Running the command with the correct user and path returns a similar "Invalid Argument" error.
We're using OpenSuse 10.2.

View 1 Replies View Related

Fedora :: Repository List And List Of Installed Applications?

Feb 17, 2010

I understand there is a file that stores the repositories' information, but I can't find it!Is there a way I can create a list of what applications have been installed?The idea is that if I am running a backup, finding a way to save the repository list and applications installed so if I am upgrading, or fixing a borked system by re-installing Fedora, I could copy the repo list back, and run the applications list like ode:yum install <cat apps.txt?> and get all of the applications I've installed via Yum without having to remember them all?Is there anything else, outside of /home, I should look at backing up? SELinux settings?

View 6 Replies View Related

General :: Adding A Repository To Yum?

Mar 10, 2011

ok i need to add the repo [URL] to the yum config

i found this but i dont know how to do it for the repo that im using

it says to add this to the /etc/yum.conf file but how do i do it for what do i have to change to the following lines? or is there another way

name=Extra Fedora rpms dries - $releasever - $basearch

View 1 Replies View Related

Ubuntu Installation :: Adding A Local Repository?

Mar 21, 2011

I have a Fedora 12 and OpenSuse DVD with me. It consists of lots of packages and hence to install these packages I don't have to download them. What I want to do is copy the package folder on my local machine and then add them as repository in Synaptic Packet Manager.

View 1 Replies View Related

Ubuntu :: Adding To Repository - Program Called VariCAD ?

May 13, 2010

I would like to install a program called VariCAD. I downloaded the install file (full file name: varicad2010-en_2.06_amd64.deb) but was wondering if one couldn't somehow do this via the repository, kind of like I did for my nvidia drivers? Is it possible?

View 6 Replies View Related

Ubuntu Installation :: Error Adding Repository Through Terminal?

Aug 11, 2011

I was trying to install Gnome 3 in ubuntu 11.04 & some other applications.While adding repositories throgh terminal encountered this error."Error reading <urlopen error [Errno -2] Name or service not known>"

View 3 Replies View Related

CentOS 5 :: Adding Newest Version Of RRDtool To Repository?

Feb 15, 2011

Can I ask if it is possible to add the newest version of rrdtool to CentOS repositories? Now I'm using 1.3.8 but there is already 1.4.5. We have some policy so I'm not able to install it not via repo way...

View 1 Replies View Related

Ubuntu :: Error In Update Manager After Manually Adding Repository?

Jul 14, 2010

Some while ago I decided to add Firefox repository directly through terminal. (Idea born when I saw in one old page (yes, never look for info in old pages ) "tutorial" how to do it.) The whole idea was simple: just add one line in terminal.The line was like this:sudo add-apt-repository ppa:mozillateam/firefox-stableBut since that, when I try to update through update manager I get errors:Quote:

W: GPG error: lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D45DF2E8FC91AE7E
W: GPG error: lucid Release: The following signatures couldn't


View 6 Replies View Related

General :: Adding A Live USB To A Repository Via Command Line [Kubuntu 10.04]?

Sep 3, 2010

Couple of days I go I setup VLC using Kubuntu's graphic software manager, and installed the 3 plug-ins, one of which was related to pulse. After doing this sound stopped working in flash videos. I had read, not sure where, that Kubuntu didn't use pulse (which slipped my mind when setting up VLC).

So I make the mistake of removing everything which had pulse in it's name (again, via the graphic software manager). A message popped-up saying that some packages needed to be removed/edited (a LONG list, a big clue that I was doing something stupid I guess). I let it run it's course and after that it won't boot properly.

If I boot it normally it hangs at the Kubuntu screen with the five dots filling endlessly. If I press F1 it's stuck at "checking battery status."

Recovery mode boots, but the recovery option does nothing.

So I was wondering if I could boot into recovery mode and go into the terminal and add a live USB as a repository for apt, and try to salvage the install?

Or should I admit defeat and reinstall?

View 1 Replies View Related

Software :: Adding User Access To Tortoise SVN Repository Browser

Sep 20, 2010

what commands should I need to run on CentOS to add user on tortoisesvn repository browser? any related link out there?

View 2 Replies View Related

OpenSUSE Install :: Unable To Install The Package Mesa-32bit From Repository?

Dec 16, 2010

Im not able to install the package mesa-32bit from this repository: Index of /repositories/X11:/XOrg/openSUSE_11.3. It tells me to make a huge change on architecture on many packages, plus downgrading mesa to 7.8.2 from 7.9 !

View 9 Replies View Related

OpenSUSE Install :: Cannot Install 12.1 M5 From Hard Disk - Error - No Repository Found

Sep 13, 2011

I would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.

I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.

But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.

I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.

View 3 Replies View Related

Ubuntu :: Software Center And Update Manager Not Working After Adding Repository?

Apr 8, 2011

I tried to install emergent using following guide:[URL](Ubuntu) However, I did not succeed, it seems that it could not install emergent properly. My far worse problem now is that it messed up my software center and update manager. I get following error message when starting the software-center:


Traceback (most recent call last):
File "/usr/share/software-center/softwarecenter/apt/", line 105, in open
self._cache = apt.Cache(GtkMainIterationProgress())
File "/usr/lib/python2.6/dist-packages/apt/", line 88, in __init__


Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Malformed line 59 in source list /etc/apt/sources.list (dist parse)'

View 2 Replies View Related

OpenSUSE Install :: Adding Window7 Boot To Opensuse 11.1?

Jan 16, 2010

I am newbie to linux so please understand. My boot loader was overwritten by windows 7. so I inserted the boot cd and repaired the boot using YAST. now I am able to login to suse but when I select windows it says bootmgr missing. I read thru some of the board and added the following lines to menu.1st:

###Windows 7
title Windows 7
rootnoverify (hd0,1)
chainloader +1
linux-d8a4:~ # fdisk -l


View 4 Replies View Related

Fedora :: Yum List Installed Packages From Repository

Feb 19, 2010

how to get yum to list all of the packages currently installed from a specific repository?

View 2 Replies View Related

Ubuntu :: Repository List Like Multiverse Or Universe?

Aug 12, 2011

i have the following repositories in my Other Software list.CanonicalIndependentme if there should be any others, like multiverse or universe.

View 6 Replies View Related

Debian :: List Packages From Specific Repository?

Apr 11, 2010

how can I list all the .deb packages installed from a specific repository?

View 6 Replies View Related

OpenSUSE :: Get Repository To Install Cherokee?

Jul 16, 2010

Where can I get repository to install cherokee on my new opensuse 11.3 ?

View 9 Replies View Related

OpenSUSE Install :: 11.2 - Cannot Find DVD Repository

Nov 14, 2009

Downloaded 11.2 64bit. Burned the ISO. Tried to install. It works fine, until it probes for the repositories, but cannot find them. I tried on two machines with three different dvd drives.

View 5 Replies View Related

OpenSUSE Install :: Which Repository For KOffice?

Feb 12, 2010

I want to upgrade Koffice to 2.1.1. When I do a search at software. [URL], I see koffice2-2.1.1 available at KDE:43/openSUSE_11.2 and KDE:Backports/openSUSE_11.2.

zypper info kdebase4 shows Version: 4.3.1. OpenSUSE is 11.2. What's different about those 2 repositories? They both appear to be the same. I'd like to get updates for KOffice. I'm using it for project management.

View 4 Replies View Related

Debian :: Adding A New Repo To Sources.list?

Feb 19, 2009

I want to download an application called deluge, browsing in the website I found that this app is in the experimental repo, and they write the url:


Packages are in the experimental repo: [URL]So, I went to edit my source.list and I added the next line:



View 2 Replies View Related

Software :: Adding To Source.list Denied?

Mar 1, 2011

I tried to add to the Ubuntu repositories via:

And got this message:bash:

/etc/apt/sources.list: Permission denied

View 14 Replies View Related

OpenSUSE Install :: Adding Os's To The Grub?

Nov 29, 2009

I have just done a fresh install of OpenSuse 11.2 over 11.1 (and I love it). Grub has the options of booting into Opensuse and windows but has missed Mint.It normally wouldn't bother me, but I use Mint for a few things I can't get working in Suse.
I was just wanting to manually add Mint to the Grub menue.I would like it to be added to the Suse grub as I prefer the look of it to the Mint grub.

View 9 Replies View Related

OpenSUSE Install :: Adding A New Partition?

Mar 6, 2010

I want to upgrade to 11.2 from 10.3. I was looking at disk usage and noticed the last time I set up my system, I allocated too much space to the / partition. It's only 50% used, while /home is 83% used. Rather than resizing and messing up /home, I thought about just adding a new partition created from the / partition. Call it say /data or something and put music, pics, pdf files and such there. But, would it be automatically mounted and what about permissions?

View 9 Replies View Related

Copyrights 2005-15, All rights reserved