OpenSUSE Install :: SUSE 11.3 Wont Start After PC Reboot?

Oct 4, 2010

I recently installed open SUSE 11.3 on my computer which I built myself and the problem I have is after rebooting the computer, I get a black screen. It will not boot the operating system. Here is my component specification:

Video Card: BFG GeForce 8800GTX 768MB 384-bit GDDR3 PCI Express
Motherboard: DFI LP DK 790FX-M2RS AM2+/AM2
CPU: AMD Phenom II X4 955 Black Edition 3.2GHz
Memory: CORSAIR XMS2 4GB (4 x 1GB) DDR2 800 (PC2 6400)
HD: Western Digital Caviar SE16 320GB 7200 RPM 16MB Cache SATA 3.0Gb/s

Another question is, where can I purchase SUSE 11.3 and if I do purchase, will I get help on the phone installing it ? Pleas keep in mind that I have little experience with SUSE Linux.

View 9 Replies


ADVERTISEMENT

OpenSUSE Install :: Suse 11.4 Installer Causes Reboot?

Jun 4, 2011

I am in possession of a new HP HPE-570f PC which I bought this morning. This has AMD Phenon 1090T and AMD Radeon HD 6770 graphics card. The OEM Windows 7 works fine. When I try to install Suse 11.4 using same DVD that works on my other (older) machine, I see the Suse Installation screen from which I select "installation", then comes the "Loading Linux Kernel" progress bar. As soon as the progress bar gets to the end, the computer reboots! Then of course I end up back at the Installation screen since the DVD is still in the drive.

View 9 Replies View Related

OpenSUSE Install :: Suse 11.2 - After Installation An Reboot - Blackscreen?

Nov 18, 2009

After successfull installation of Suse 11.2 and reboot i get a Blackscreen. When i try to start with "init 3" its still the same problem, Error Message in Bootlist

"Failed to get NUMA Memory Information from." Suse stops loading after "HAL DAEMON - DONE" and gets a blackscreen. If got a Nvidia Gforce 9400GT Graphic Card, and a Athlon 2 x2 Processor. I loaded the DVD with Bittorrent and Checksume and Burning are o.k/successfull. I also tried to reinstall with ext3 but still the same problem. Are there any known issues/solutions for this Problem?

View 9 Replies View Related

OpenSUSE Install :: Suse 11.2 Didn't Start?

Mar 8, 2010

I install 11.2 on AMD dual core 4200+ and 2G ramafter I enabled some effects on configure Desktop effects and when I pressed apply key the computer hang and when I restart it, it hang before login screen

View 7 Replies View Related

OpenSUSE Install :: Suse Don't Start Correctly?

Apr 1, 2010

i just installed OpenSuse 11.2 whiteout problems, once finished i reboot my eeepc, but the startup stops at :

Code:
Starting udevd:
Loading drivers, configuring devices

View 9 Replies View Related

OpenSUSE Install :: Suse 11.2 Does Not Start On Toshiba Satellite A350-22Z?

Mar 6, 2010

I downloaded and installed OpenSUSE 11.2 but only screen I see is console, SUSE won't even open.I assume that is an error of graphics card (ATI Mobility Radeon HD3650) or Processor (Intel Centrino 2)The error says that there is niether internet connection nor a driver for graphics card.I was able to work the command "startx" while I was using Ubuntu 9.10 (Ubuntu was not able to install proper graphics card driver too)

View 9 Replies View Related

OpenSUSE Install :: Cannot Start Windows Vista After Failed Suse Installation

Feb 7, 2010

I wanted to try openSuse alongside with Windows Vista and Ubuntu. During the installation Suse wanted to delete my Windows partition. Of course I denied and stopped this installation, but now when starting my computer, the boot menu gives Vista, Ubuntu and Suse as a choice, but if I choose Vista, the Suse installation process is starting instead of Windows, there is no way to get Windows started (fortunately Ubuntu is working so that I can write this message).How can I get Windows starting?

View 9 Replies View Related

SUSE / Novell :: OpenSUSE 11.2 And 11.3 Resume Session After Halt/reboot?

Sep 16, 2010

Once I halt my desktop machine and then boot it back up, applications previously open will open automatically. Is this some sort of KDE4 feature? Or what process is responsible for this? And is there some sort of file constantly updated about open programs and once I reboot, this file is read by KDE during the boot-up and those previously open programs will be started automatically?

View 2 Replies View Related

SUSE / Novell :: Monitor Turns Off After Few Minutes And Reboot - SUSE 11.3 KDE 4.5?

Nov 4, 2010

I have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.

View 4 Replies View Related

OpenSUSE :: Can Only Start Firefox Once Have To Reboot To Get It Open A 2nd Time

Aug 28, 2011

I will open firefox then scroll to file-quit firefox, firefox closes fine but when i want to open firefox again it wont, i have to restrate opensuse 11.4 linux 2.6.37.6-0.7 kde 4.6.0.0.

View 3 Replies View Related

OpenSUSE :: KMix Won't Start Up In SUSE 11.4?

Mar 16, 2011

KMix doesn't start up in OpenSUSE 11.4 (x86) + KDE 4.6.0. So I can't configure my audio channels and so on.

Error:
inux-d84p:/home/Willem # kmix
unnamed app(7652): KUniqueApplication: Cannot find the D-Bus session server: "Did not receive a reply.

[code]...

View 5 Replies View Related

SUSE :: Improperly Shutdown Suse - Restore Gnome To Automatically Load The Default User On Start Up

Jun 30, 2010

I am new to Linux and wow, it did not take me long to run into a huge snag. I am running Suse Linux Enterprise 10 on a laptop and by some strange reason the computer froze from overheating and I was forced to shutdown improperly. Once I restarted it booted right to the command prompt when it usually instead boots to the default user. I managed to get gnome running using the "startx gnome" command. But when gnome loads, none of my normal extentions load like my wireless driver, the sound driver, etc. how to restore gnome to automatically load the default user on start up or fix any other damage I might have done? lol

View 3 Replies View Related

OpenSUSE Install :: Can`t Install Suse 11.3 - Every Time System Shut Down In Install Process

Jan 30, 2011

I tried to install suse 11.3 but every time the system shut down in the install process it never finish

I think that the FAN does not work

I have an Acer Aspire 5720z

View 3 Replies View Related

OpenSUSE :: After Reboot Suse10.2 Got A Error Message "Could Not Start The X Server"

Jul 12, 2010

I used init 0 to make server shutdown,and replaced the power cord when I boot the server,it can't enter the GUI then I used init 5 and get the following message

Could not start the X server (your graphical environment)due to some internal error. contact your system administrator or check your syslog to diagnose. In the meantime this display will be disabled. Please restart GDM when the problem is corrected.

View 7 Replies View Related

OpenSUSE Install :: Fresh Install + Update & Reboot = Unable To Open Session?

Sep 14, 2010

I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again

View 1 Replies View Related

OpenSUSE Install :: Fresh Install 11.4 Blocks At Splash Screen On Reboot

Jun 30, 2011

I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.

Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.

Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.

I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.

Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.

So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.

View 4 Replies View Related

OpenSUSE Install :: 11.3 64bit Install Freezes After Reboot During Autoconfiguration - GeForce 9300 Chipset (MCP7A)

Sep 15, 2010

I just wanted to install openSUSE 11.3 64bit. Installation works fine until reboot request. It switches to console, saying that it tries to load without reboot, screen becomes black, i got a cursor with animated wait-symbol and then it freezes. Can't move the mouse, no reaction on keyboard inputs, HDD-led not blinking. If I reset my PC and boot the new installation, it says that an error occurred and asks me to complete the unfinished installation. It starts auto-configuration and freezes again at about 3%. I tried again and some time it did not start the graphical yast but in textmode. The freeze came at the same position, but it posted many lines on console with error messages. I could not scroll, so I saw only parts of it, saying kernel panic and many addresses.

I guessed that it has to do with my chipset and graphics card, it is a nVidia GeForce 9300 chipset (MCP7A) with onboard graphics. It works fine with openSUSE 11.2 64bit by the way, but it was not supported in earlier versions than 11.2. So I tried to install it with proprietary drivers. I started the installation again and added the nVidia repository and a Packman repo and selected the driver which works fine on 11.2. Error was same as above. Next I tried an openSUSE 11.3 32bit Live CD that came with some PC magazine and lay around and it is booting and works fine!

This was confusing to me, so I wanted to try the 64bit version of the live CD. Which was again not booting. It freezes at some part, maybe when it tries to start X. But it also freezes booting with 'nomodeset' (found it somewhere here), in VESA mode and even in textmode! So i guess it's not X what causes the freeze. But it is sometime at the end of booting up, as far as I can say. I would like to use the 64bit version but I don't know where to search for the problem. I checked every checksum before burning, so a broken media should not be the reason

View 9 Replies View Related

OpenSUSE Install :: HP Tx2525nr Install Fails On 1st Reboot After Installation?

Jan 26, 2010

This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?

View 1 Replies View Related

OpenSUSE Install :: Open Suse 11.3 Along With Win 2008 R2 OS - Error "Win2008 R2 Is Not Supported In Open Suse Installer"

Mar 6, 2011

I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!

View 9 Replies View Related

OpenSUSE Install :: Grub Error After Install And First Reboot?

Dec 21, 2010

I tried several times to install sue 11.3 on a amd 64 system by configuration a soft raid1 by this order:

md0 /boot
md1 /
md2 swap

or my problem, after configuration and install over the dvd and yast installation menu, after the first reboot I have a grub error -> nothing found.If i try to setup suse 11.2 over the same method, it works.after a system upgrade to 11.3 all is working fine. The only problem is by installing directly the 11.3 I also re-download the dvd and try over the netcd and it's all the time the same error.I searched in the forum but nothing found (perhaps i do a wrong search)

View 2 Replies View Related

SUSE / Novell :: Install OpenSuse 11 64bits On A Box Already Has 32bits OpenSuse Installed?

Nov 23, 2010

I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?

View 7 Replies View Related

OpenSUSE Install :: Install Suse Alongside An Existing Install?

Apr 18, 2010

i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?

View 6 Replies View Related

OpenSUSE Install :: Panel Bar Changes After Reboot

Mar 22, 2010

I use the Air openSUSE theme for my panel bar, etc., yet, after rebooting (or starting up the computer after it has been shut down), the panel bar comes up as if it were configured with some kind of black theme, which I do not like - you can still see things like icons for windows, launcher, etc. except for the clock, since its font color is black.

How do I put a stop to this? I have tried everything I can think of, customized settings, different themes, and so on, yet I get the same results after booting into openSUSE.I am using the openSUSE 11.2 KDE version.

View 9 Replies View Related

OpenSUSE :: 11.3 Will Not Load After First Reboot During Install / Fix It?

Oct 26, 2010

11.3 will not load after the first reboot during install, after the reboot the screen just goes blank and that's all.

This is a single setup no dual boot, from openSUSE-11.3-DVD-x86_64, on brand new Latitude E6510 laptop.

View 9 Replies View Related

OpenSUSE Install :: Pc Is Frozen After Reboot?

Jul 17, 2011

config is pentium D and nvidia 7300 , plus 1 gb of ram ; ok they had an 11.2 opensuse version and installed 11.4 from a cd (or dvd) they bought in a shop , the pc is working ok, but upgrades are NOT , how come ? This looks stange to me

- in init 3 : zypper cc && zypper ref && zypper up does not work : after reboot using "shutdown -r now" the pc is frozen, with the green screen and white lizard (no access to keyboard, nor to grub options), ctrl+ alt+ f1 is ko for example.

- in init 3 and only with 3 repos (oss, non-oss, and update of 11.4) a zypper dup works but a bug with mozilla firefox 4 brading opensuse which is ko . we continued , can one package break down a zypper dup ? ( same ko result : after reboot usinf shutdown -r now the pc is frozen with the green screen and white lizard (no access to keyboard, nor to grub options) )

View 9 Replies View Related

OpenSUSE Install :: Suse Install Formatted User Data

Sep 11, 2010

I have installed Suse on my Windows Vista 64bit machine a couple of times, but the last time I did it - after a disk change - presented some unanticipated problems. Prior to install, Windows Disk Management (whose output I was unable to paste into this question) showed that my disks were laid out as follows:

[Code].....

Disk 0 is a Seagate ATA drive, while Disk 1 is a Western Digital Ext HDD Usb Device. Looking back, I think I should have carved out a partition after M before installing Suse, but I was uncertain whether to make it a logical one or a primary, and in the past the installation has taken the 25 or so gig it needed from the last defined partition on disk 0. This time, however, it went after disk 1, and reformatted the entire drive, deleting about 300 gig of user data, including my system backup. What really suprised me is that it took up the entire drive: 2 gig for the swapfile, then a 20 gig partition, and all the rest for the third partition.

This is not what I would have expected. I especially would not have expected the installation to re-format user data. In any case, I did not want Suse on disk 1, so I reformatted the drive and then used my Partition Manager to rebuild the boot Mbr. So now, I am able to boot into windows, do not have Suse on my machine, but have lost critical data. My disks are now back to the way they were when I started (see above), except that drive F is now all free space, except for my latest backup. My question is how do I ensure, when I reinstall Suse, that it will choose disk0 for the installation and will not overlay any of the data that I have on that drive.

View 8 Replies View Related

OpenSUSE Install :: How To Re-install Suse On A Dual Boot System

Oct 22, 2010

Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.

View 2 Replies View Related

SUSE :: After Reboot All System Files Are Read-only

Mar 18, 2009

We are running SUSE 10 SP1 and MySql 5.0.62 with heartbeat configured cluster attached to a SAN and after upgrading powerpaths on the fiber switches we had to reboot the machines and remount the SAN luns.

The cluster successfully started and was working fine for about a day or so and then i logged in as root and hosts, fstab, known_hosts were all giving me this error when i tried to modify them "W10: Warning: Changing a readonly file"

I failed over to another node and same thing happens on another node. I can't modify any of these files

View 2 Replies View Related

SUSE :: Error When Attempting To Reboot Server

Sep 1, 2009

We have a server running suse 9. I had to do a reboot yesterday. the server dropped off the network, but did not reboot. It was attempting a connect, but I don't know why or to what. These are the lines that I saw on the screen:Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1) ))

View 1 Replies View Related

OpenSUSE Install :: Reboot Hangs At Many Points?

Jul 1, 2009

Have openSUSE 11.1 and (AFAIK) KDE 4 on an older notebook; worked OK for weeks, then booting became a problem and the OS seemed to go to sleep between keystrokes: now the cursor stops blinking, the clock stops running, and nothing happens after clicking a radio button until the mouse moves. Am now 25 minutes into a reboot, hung at "Unmounting file systems" but it also hung for a while when changing run levels. Is this related to the stability problems with 11.1 I've read about? Possibly KDE? Where would I adjust a config to use kde 3.5 rather than 4?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved