OpenSUSE Install :: Grub Cannot Install Boot Loader On HP ProBook With 500 GB HD

Aug 20, 2011

I got an HP ProBook 4520s that comes with 500 GB with Windows 7.

It comes with 4 partitions: SYSTEM, the main Windows partition, HP Recovery and HT Tools.

I tried to have OpenSuse installation to resize the Windows larger partition but it said that it couldn't with this message:

"The partition on disk /dev/sda is not readable by the partitioning tool parted, which is used to change the partition table.

You can use the partitions on disk /dev/sda as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or remove partitions from that disk with this tool."

So I resized the Windows partition from Windows 7 and added 3 partitions on the empty space for Linux: /, swap and /home. Still OpenSuSE installation has shown this warning message:

"The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot if BIOS support only lba24 (result is error 18 during grub MBR)."

I configured OpenSuSE installation to install on those partitions but Grub could not install the boot loader with this message: "grub> setup --stage=/boot/grub/stage2 --force-lba (hd0,2) (hd0,2)

Error 17: Cannot mount selected partition grub> quit"

I already tried this in OpenSuSE 11.4 but I suspected it needed newer parted and grub versions, so I also tried OpenSuSE 12.1 milestone 3 with the same results.

The installation finishes but no Grub boot menu appears, it goes to Windows as if no Linux was installed, although the installed version is there in the 3 partitions that were created on Windows, I just cannot make them boot.

View 9 Replies


ADVERTISEMENT

OpenSUSE Install :: Reinstall Grub Boot Loader ?

Aug 27, 2011

I am running Windows 7 and openSuse 11.3 as a dual-boot system. I had to run a Windows 7 Startup Repair, which apparently reset the Windows boot loader, so now I am not getting Grub. How do I reinstall or reactivate the Grub boot loader? I am assuming I have to use the installation DVD?

View 6 Replies View Related

OpenSUSE Install :: GRUB Boot Loader After Re-installing Windows XP ?

Mar 21, 2011

This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.

I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.

View 1 Replies View Related

OpenSUSE Install :: Removing Boot Loader Information / 2nd Grub Screen Does Not Get Displayed?

Jun 11, 2011

When openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.

I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.

I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.

How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?

View 6 Replies View Related

Ubuntu / Apple :: Installer Failed To Install Grub Boot Loader - Trying To Finish The Install NOW

Oct 16, 2010

Toward the end of installing Ubuntu 10.10 32bit (Alt CD) on my iMac 11,1, the installer asked me to type in the location for installing the grub boot loader.

I told it to use /dev/sda3 and it immediately failed. I'm still in the installer. Can anyone suggest a solution?

Here are my partitions on sda:

...from the shell in the installer, there is no grub.cfg in /target/boot/grub.

View 9 Replies View Related

Ubuntu :: How To Install Grub Boot Loader

Mar 15, 2011

under ubuntu how can i install grub boot loader ?is there a program that let me do it ?i would like to add a grub load to an hard disk , and maybe to an usb stick and to a floppy disk

View 9 Replies View Related

Ubuntu :: Install The GRUB Boot Loader On New Partition?

Oct 11, 2010

I want install 10.10 Maverick on a new partition alongside my OS X and 10.04 Lucid installs to see if it works on my machine. I'm a little unsure about some things.

1)Do I need to install the GRUB boot loader on this new partition?

2)Can I use the same swap space or is recommended to create a new swap?

View 5 Replies View Related

OpenSUSE Install :: Using GRUB And The Boot Loader Location Has Both "Boot From MBR" And "Boot From Root Partition"?

May 19, 2011

I just did a fresh install of 11.4 and I LOVE IT!!! One of the little issues I am having though, is that there is no login screen. No matter what settings I change it still auto-logs me in.

I am using GRUB and the Boot Loader Location has both "Boot from MBR" and "Boot from Root Partition". Is this right? I would think that I should just boot from the MBR.

View 4 Replies View Related

Ubuntu Servers :: Install Fails At Grub Boot Loader

Feb 26, 2010

I'm using the RAID1 setup, which is configured in the BIOS, as it is a HP Proliant server. i have 2 500GB hard drives configured in a mirror. when booting the install, it recognises this, and deals with it fine.

The problem is, when it gets to the section of installing the grub2 boot loader, it just stops and gives me the "ubuntu installer main menu" where if i select grub boot loader install it just loops back, and if i select LILO installer, it errors, saying an installation step failed.

It has the option to skip installing boot loader, but then, can i get it to boot a different way? can i boot manually into the server install and then install GRUB and hope it works? can i install grub1 rather than grub2?

View 5 Replies View Related

Server :: GRUB Boot Loader Lost / Install It From Windows?

May 26, 2010

I have installed Windows Server 2003 after CentOS. Then GRUB boot loader lost. Is there a way I can install GRUB boot loader from Windows?

View 2 Replies View Related

Ubuntu Installation :: Grub Boot Loader Failure On Clean Install

Feb 14, 2010

I'm having a problem installing Ubuntu Studio 9.10-alternate-amd64 onto my machine. This is the third attempt and I keep running into the same problem. Grub Boot Loader will only install to 16% when a screen pops up:

Ubuntu Installer Main Menu

Choose the next step in the install process:

choose language
configure the keyboard
detect and mount CD-rom
etc...

choosing the option "Install Grub boot loader on a hard disk" sends me back to the Grub install and once again at 16% the Ubuntu Installer Main Menu pops up. Choosing the option "Install the Lilo Boot Loader on a hard disk" resolves in an Lilo-install failure and i'm directed back to the Installer Main Menu. The option "Finish the installation" sends me back to the same menu..I'm stumped as to what to do... a disk check ensured me that the instal-dvd is valid though I can't get past this silly install menu.

View 3 Replies View Related

Ubuntu / Apple :: No Option To Install Boot Loader (grub) To /dev/sda3 - Fix It?

Nov 28, 2010

Dual-Boot: Mac OSX and Ubuntu

Want to dual boot 10.04LTS and OS X 10.6.5
But there is no option to install the boot loader (grub) to /dev/sda3 as per the following
using Bootcamp

https://help.ubuntu.com/community/Ma...elInstallation

View 3 Replies View Related

Hardware :: Can't Install Boot Loader - Both Grub And Lilo Failed / Resolve This?

Jan 17, 2010

I have a Dell Inspiron 1721. Recently I replaced Windows Vista Home Edition (32 bit) with Slackware Linux 13.

Lilo wouldn't work, when I turned on the computer it printed "Li" and then 20 lines of 090909... and then the computer would hang up. So I just used my Slackware-boot-flashdrive-thing that I created during installation to boot my computer and told myself that I would fix it later.

Also, when I installed, cfdisk (or it might have been sfdisk) complained that /dev/sda did not contain a valid MS-DOS partition table. fdisk still worked, so I used it to create a new table, and cfdisk worked fine and the installation went along normally.

I reinstalled Slackware about two days later (I realized that I had installed the 32 bit version instead of the 64 bit). Lilo still didn't work.

I thought it might be something wrong with the Slackware DVD, so I downloaded and attempted to install about 4 different distributions. None of the CDs would work. The computer would start up, Linux would start to load, and the computer would freeze.

Xubuntu was the only distro I had that I could get to install. Halfway through the installation, (Surprise!) I got an error, something like "Package Grub failed to install, you will not be able to boot your new operating system".

The rest of the install went fine, so I restarted my computer and tried to use another one of my CDs to boot Xubuntu. I got the error "/dev/sda does not contain a valid partition table", and later "ext4-fs: checksum failed on dev sda at sector...", and "please specify a valid partition for root=". I am absolutely positive that I entered the correct partition, I triple checked and entered other partition names to make sure.

I'd also like to add that the computer makes horrible crunching noises when it starts up and when I do stuff like press keys. So is something seriously wrong with my hardware, or is there another explanation for all of this? Because I really don't want to have to try to repair the computer and can't pay to have it repaired.

View 8 Replies View Related

OpenSUSE Install :: Removing Grub Loader / Error 22?

Jun 29, 2010

I have a Windows 7 OS installed as my main OS, it installed on its own HDD with 3 other data storage drives.

On my 5th drive I installed a copy of OpenSUSE 11.02 to see if I like it. I have decided I don't wish to keep it so I reformatted the drive while in Win7. Of course on restart I got the Grub 1.5 Error 22. All my HDD's are seperate and there are no partitions.

I have had to reinstall OpenSUSE just to get my PC to boot.

All I want to is remove OpenSUSE from my computer without losing my Win 7 install.

My Win 7 install disc fails to recognise my Win 7 so I can not get the recovery command prompt/repair options.

Can someone explain in say 5 simple steps to get back my original MBR so I can boot straight to Windows as I can't seem to find a guide that actually explains what to do. Either by doing it in OpenSUSE 11.02 or Windows 7 Ultimate 64-bit.

View 9 Replies View Related

Fedora :: Install Windows XP On A Free Partition Without It Replacing The GRUB Boot Loader?

Sep 20, 2009

I am using Fedora 10, and was wondering if it is possible to install Windows XP on a free partition, without it replacing the GRUB boot loader?

View 6 Replies View Related

Ubuntu Installation :: 10.10 Missing Boot Loader - Manual Install Brings To GRUB CLI?

Dec 22, 2010

I am a brand new Ubuntu user that just tried to install on an old PC using the 10.10 desktop edition.During installation, I hit an error that the bootloader could not install, and after reading about it on the forums, opted to attempt to install it manually after. I have followed the tutorial located here,[URL].. on reinstalling GRUB2 from the liveCD, which I assume means to boot with the installation CD and select try Ubuntu (given the only other option is install, which I have tried twice) everything up to step 5 in that tutorial seems to run successfully, and I am given a message it is installed, but then when I reboot the system it does not open the GRUB2 menu, rather the CLI interface, which suggests there is no grub.cfg

So I am unable to refresh at the GRUB menu because that command is not recognized by the CLI (and it may not help if I am missing files, so I might have screwed up reinstalling them in step 5, or maybe the "Try Ubuntu" terminal doesn't alter the computer like I thought?)

View 6 Replies View Related

OpenSUSE Install :: GRUB Loader Will Not Run If Windows Is Set As The Active Partition?

Apr 6, 2011

A few days ago my Laptop wouldn't hibernate in Windows 7, I managed to fix this problem by going into Windows' Disk Management tool and setting the C:/ Partition as the active partition, this fixed my hibernation issue, however I have just noticed that now when I boot my laptop my GRUB menu no longer appears, instead it just loads Windows straight away as if it was the only OS on my laptop.

I've confirmed it's something to do with my recent Disk Management change as I booted up GParted, removed the boot flag from Windows and when a rebooted my GRUB menu reappeared.

Not sure on how I can both have Windows as the active partition while being able to keep GRUB working also.

My Partition Setup is as follows:

/dev/sda1 C:/ Windows 7 (NTFS) (Boot Flag Set)
/dev/sda2 D:/ DATA (Documents and stuff) (NTFS)
Unallocated 1 MB
/dev/sda3 Extended 146.49 GB (LBA Flag Set)
/dev/sda5 Linux Swap 2.01 GB
/dev/sda6 ext4 20.00 GB
/dev/sda7 ext4 124.46 GB
Unallocated 10.00 MB

I'm running openSUSE 11.4

View 3 Replies View Related

OpenSUSE Install :: Boot Loader Graphic Changes?

Dec 1, 2009

Why does my boot loader(GRUB)graphic randomly change to penguins playing on ice.

View 3 Replies View Related

OpenSUSE Install :: Lodaing Boot Loader In MBR ?

Feb 18, 2010

I had installed Win Xp on my first physical partition, and SuSe on Second partition now i formated the Xp and the GRUB is vanished from MBR i want to rload it . i tried it using Rescue System but still Show error msg. "cannot load OS" on booting. tried to install and using repair option i selected MBR field . but not working ..

View 1 Replies View Related

OpenSUSE Install :: Not Installing Boot Loader?

Jul 15, 2010

I'm trying to make my iMac "Triple Boot".But using rEFIt as the boot loader, and installing Grub or Lilo makes the "Boot Menu" complicated.

"SO, DO YOU THINK IT'S A GOOD IDEA NOT TO INSTALL "GRUB, LILO, OR OTHER BOOT LOADERS", and just let rEFIt to do the job?

View 4 Replies View Related

OpenSUSE Install :: Boot Loader Gets Stuck?

Aug 25, 2010

I have had to reinstall SuSE 11.2. After its successful completion it got into a strange situation: the boot loader identified a boot record on the hard drive and displayed the appropriate message on the screen - but then nothing happened. When I restarted the system with the live CD and chose "boot from hard drive" it got to the normal boot menu without difficulty. I have no idea why the second method succeeds while the first fails

View 3 Replies View Related

OpenSUSE Install :: How To Get Back Suse Boot Loader

Aug 2, 2011

Now after my experiments with Open Indiana on another partition, I have rewrite my Suse Grub, that was as in / suse partition as in MBR. Suse partition is intact as well as files in /boot/grub, but in MBR is boot loader of Open Indiana as primary. How can I get back Suse boot loader. On Installation media under Rescue system I didn't find any option for re-installation of boot loader.

P. S. Now I can run Suse completely in Gui without any problem, because, I made some changes, in Open Indiana boot loader, but I would like return a Suse Grub.

View 1 Replies View Related

OpenSUSE Install :: Dual Boot Loader Gone After Windows Reinstallation

Nov 19, 2010

had a dual boot system with openSuse 11.1 and Windows XP working OK - Linux boot loader was where OS selection was made (openSuse was installed after Windows) Last week I had to reinstall Windows and this removed the Linux loader from MBR and Windows booted automatically. I wanted the Linux boot loader back,checked the threads about boot loader restoration and did the following:

- downloaded Knoppix 6.2.1 ISO and burned to CD
- booted with CD
- opened terminal with root privileges and typed:
grub (ENTER)
grub> find /boot/grub/stage1 (ENTER)
> (hd0,2)
grub> root (hd0,2) (ENTER)
>Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0) (ENTER)

setup was successful (no error messages)

Now when booting, i have an error that root (0,3) can not be mounted and "Press any key to continue"??? When hitting any key I see that there is GRUB there with all entries as in original state (Suse 11.1 and Windows) but only Windows can be booted. Then I downloaded live eval of openSuse 11.1 and did the same (booted from CD and run same commands from terminal as root) - again no errors but still "root (0,3)" can not be mounted..

View 9 Replies View Related

OpenSUSE Install :: Get Two Added Options In Boot Loader With Identical Names Like Failsafe And Normal?

Nov 1, 2010

I am new to Linux. When I installed some applications and something through package manager,Now I get two added options in boot loader with identical names like failsafe and normal. what is that?multiple kernel?

View 3 Replies View Related

OpenSUSE Install :: Clean Install 11.4 Dual Boot System Grub Error?

Apr 27, 2011

I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6

I continued with the install and then got:

Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit

View 9 Replies View Related

OpenSUSE Install :: 11.3 - Red Error: "the Boot Loader Installed On A Partition That Does Not Lie Entirely Blew 128 GB .The System Maight Not Boot"

Mar 29, 2011

i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:

c: 97 gb
d: 150 gb
e: 150 gb
f: 100 gb
g: 50 gb
and 38 gb unlocated part

in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;

View 1 Replies View Related

OpenSUSE Install :: Grub Does Not Boot / Just Showing A Black Screen Written 'Grub'?

Feb 26, 2010

I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.

View 9 Replies View Related

OpenSUSE Install :: Commands Make System Boot To Grub Shell Instead Of Grub Menu?

Apr 17, 2010

I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.

Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot

Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.

If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.

Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux

View 6 Replies View Related

Ubuntu Installation :: Install A GRUB Loader Using Vista?

May 14, 2010

I Dual-Booted (if im not mistaken is the term for installing two OS) Ubuntu 9.10 and Windows Vista. Using Ubuntu 9.10 as my primary OS and using Vista for some programming ( college stuffs ) Only a moment ago, i reformat/recovered my Vista and only i found out that, my GRUB loader has gone. I'm asking is there any way for me to install a GRUB loader using Vista?

View 7 Replies View Related

Ubuntu :: Server Can't Install GRUB Loader / Sort It?

Jun 15, 2011

Trying to install 11.04 64bit Server onto my machine.
First try from USB stick failed because the installer couldn't continue without a CDROM present. fine, whatever, dust off the old CD drive and install from it.

Second and subsequent tries have failed because the installer gets to the point of installing the GRUB bootloader to the hard drive and fails. I cannot install it to any of the drives in the system, nor will it boot when using the 'boot from first harddrive' option while booting from the CD drive.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved