OpenSUSE Install :: Error Messages For All Options In Yast2
Mar 13, 2011
Yesterday, after I reinstall suse linux enterprise 11 in my note book. I got some error messages. They are :
From Suse linux installing processedacroread-9.3.2-0.1.1.i586.rpm
After installed suse linux.
error messages for all options in yast2.
The story is when I started installing suse linux, I checked first the live cd and I got message that live cd is okay. But, when the installation process was running, I got 2 messages error. But, the messages were informing me to verified from software management module.
So, my questions are :What are acroread-9.3.2-0.1.1.i586.rpm and yast2-pkg-bindings-2.17.45-0.2.10.i586.rpm and what are they fungtions? If my guess is not wrong, acroread means acrobat reader. Is it true? Where is others place I can download them (no.1,2,3) beside the live cd? Or, if the easyest way is live cd. As yast2 got error, is there an other way I can installed them (no.1,2,3)?
I just installed 11.4 and was adding a new repository which I entered incorrectly. Yast2 complained and did not add it to the repository list. Now when I run Yast2 Software Management.
I get the following error message... "There was an error in the repository initialization. Error refreshing service Packman 11.4 (vaval.com - Islam Resources and Information. This website is for sale! Parse error: repoindex.xml Opening and ending tag mismatch: meta line 2 and noscript"
Since this line does not show up in my repository list I cannot remove it. How do I edit the data file directly and where is it located?
I am using opensuse 11.3. I am encountering a problem while trying to log in. The problem message was "could not start kdeinit4. Check your installation" I tried to solve this problem by following the instructions given in OpenSuSE 11.0 Could not start kdeinit4... i.e., I opened yast2 and then I had to select "software management" from there in order to update all the packages in kde4. But I got another error when I clicked it.
/usr/lib/YaST2/bin/y2base:/usr/local/lib/libstdc++.so.6: no version information available (required by /usr/lib/YaST2/plugin/libpy2wfm.so.2)
The error list continues. I cannot type whole error list ending with similar wordings as above as am using different computer. I tried to solve this one too by following the instructions in Relocation Error but I could not understand its line "...fixed the problem by taking /usr/local/lib out of ld.so.conf, and then running ldconfig" as am new to linux.
Using 11.4 I noticed a couple of messages I have not seen before:-
Code: <5>[ 14.485094] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it <5>[ 14.485098] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
My machine is a TP T42 but should I try and od anything about this message or just ignore it?
Every boot, I see screenfuls of staprun error messages fly by, e.g from /var/log/boot.msg:
Code: <notice -- Aug 31 23:39:53.511288000> service boot.startpreload startstaprun:send_a_relocation:336: ERROR: reloc name too long: .gnu.linkonce.r._ZN6AsicNII18ucode_class_caymanE23NITiling ModeLookupTableE: No such file or directory
I haven't been able to locate this cause. The problem developed as follows:
1. Used a downloaded .ymp file to add a community package, chose NOT to add the repo permanently from the Customize button... installation of package failed. 2. Added the repo manually in Yast Software Repositories and it went thru the process without error, BUT the repo never appeared in the list. (this is where i think the problem lies) 3. Tried to add the package using .ymp package without blocking the new repo addition... package installed successfully. Then deleted the repo using Yast Software Repositories gui.
Now starting Yast Software Management the process starts and downloads the repo.xml files from each enabled repo, then displays a error msg stating "Parsing Error". Dismiss and it loads the normal interface and seems to work properly from then on.
I am unable to examine Apache httpd error log from YaST2 because the lines are too long; the browser just truncates them and thus it does not show any description. The only option is to save it. However, when I chose that option, YaST2 encourages me to save it in /tmp, and as soon as I do that, the log becomes accessible to every user!
I've been running a SuseStudio-built VM for a few weeks with no issues. I built a new one recently, and now I can't configure a new vhost in Apache using the http-server module. It gives me this error. Screen shot 2010-11-06 at 11.42.24 AM.png. Why YaST suddenly decided that my hostnames aren't valid?
I've been trying for awhile to install the restricted formats, but when in the download & and install process, YaST2 pops up saying that such and such RPM has failed. I hit ignore, and it happens again and again to all the other packages, bar the odd few that work.
Whenever I tried to install LXDE using the 1-click install, YaST2 just freezes and doesn't respond and doesn't install anything. In fact, YaST2 always freezes whenever trying to install a program with the 1-click install.
So my question is, How do you abort YaST2 from installing because obviously the Abort button doesn't even work! And lastly, how can I install LXDE through the terminal as I always never have a problem installing something through the terminal.
I have problems with running Yast2 under Gnome when I connect via VNC to the computer. The first 20-30 times it worked, but then it simply stopped to work. When switching to another VNC-Server (instead of :1 to :2) it works again for approx. 20-30 times. The behaviour is very much similar to the one described here:
Yast2 startet nicht unter VNC (SUSE 11.1/Gnome)
I use OpenSUSE 11.2 with german language set. The VNC server I use the one that is installed "by default".
When I try to run Yast2 from a terminal under Gnome as normal user I get the following output:
./yast2: Zeile 30: ./lib/YaST2/bin/yast2-funcs: Datei oder Verzeichnis nicht gefunden ./yast2: Zeile 267: set_lang_from_sysconfig: Kommando nicht gefunden. ./yast2: Zeile 192: check_qt: Kommando nicht gefunden. Qt GUI wanted but not found, failing back to ncurses.
11.3 ; looking to play with DNS; nothing of the kind is showing in Yast networking menus. Checked, and BIND shows as installed. Also, while I'm crying for help: cant see the windows box next to me; can ping it, and could browse to it with File Manager yesterday, but not working today ! Also; I tried KDE desktop (like new things) but it's driving me nuts (menus too small, I lose the choices as I move through submenus) and I'd like to go to Gnome ; how to ?
Whenever I try to install anything from YaST2, it decides to include a lot of extra stuff I don't need. It says it's just added dependencies, but I hardly think the Russian translation for the open office help files counts as a dependency for WINE. This also happens when I try to install the amarok mp3 codec.
This is my second day trying to learn opensuse. My lack of terminology makes it very hard to google for the answers. I need to do this: opensuse:~ # yast2 install postgresql-server apache2 perl texlive perl-DBD-Pg libapr-util1-dbd-pgsql I know about yast, however this looks like something that needs to ran from terminal.
I'll get to the point straight away... I'm trying to install OpenSuse 11.2 on a HD that already has Win 7 on it.I left out 15.52 GB of space just to install Opensuse but when I select that partition (which of course is empty) and tell YaST2 to install OpenSuse there it tells me there isn't enough space. Is 15 GB not enough!?inimum requirements where supposed to be 3GB I think...S this is how the disk is devided... Primary partition of 50GB for win 7, 400 of Logic partition for Programs, and supposedly 15GB for OpenSuse...
It's been a while since I've use linux (specifically suse). But my wife and I are expecting our first child and our office/second bedroom is now being converted into the baby room. I built the computer that is currently in there and it is a really nice one that I do not want to get rid of. Two 500GB Sata2 drives and 8Gigs of RAM (not to mention my quad-core Phenom AMD processor and sweet asus motherboard) -- I just can't get rid of it. So what I planned to do was turn it into a small home server. I did some research and kept coming back to using opensuse as the server. I read this article The Perfect Server - OpenSUSE 11.4 x86_64 [ISPConfig 2] | HowtoForge - Linux Howtos and Tutorials and it seemed to have just about everything I'd like to do (maybe some extras that I don't really need, but might in the future). Everything was going fine until I got to a certain point. The install went fine, and I was starting to customize some of the settings for my own home setup. Now, the problem...
I've gotten to page 3 of the tutorial The Perfect Server - OpenSUSE 11.4 x86_64 [ISPConfig 2] - Page 3 | HowtoForge - Linux Howtos and Tutorials
and I am installing packages through yast2, and all the packages installed fine except for 'compat-readline4'. I think this is a form of command line editor or something to do with that. I am sure I am going to need it to finish the server set up, but I can't get it installed anywhere. I've tried to install it by pointing directly to the mirror found at rpm.pbone.net and still I get nowhere.
Yast2 auto refresh seems to fail everytime I run it. Even though I installed all the other packages, I get an error message that says it can't get the medium. When I look at the details of the error it says it can't resolve the host for downloads.opensuse.org.
I was running openSUSE 10.3 using yast2-firstboot and everything worked perfectly. I have since upgraded to 11.2 and after a post on this forum I was able to get yast2-firstboot to run. The control file was moved to touch /var/lib/YaST2/reconfig_system instead of touch /etc/reconfig_system. All is well there and firstboot does run. I have a script that basically sets up the hostname, IP addresses, etc on the machines. This worked in 10.3 but in 11.2 it doesn't execute. I can manually run the script which I have defined in the /etc/sysconfig/firstboot file. The SCRIPT_DIR="/usr/share/firstboot/scripts" I noticed a new entry this file labeled - # Action that should be done after the firstboot sequence finishes.
FIRSTBOOT_FINISH_ACTION="" Should I place my script here? I read the doc and you can use reboot but need my script to run first. To I just put the name of the script or the entire path to the script if that is the place to put it. On a side note. Does anyone know where the default FIRSTBOOT_FINISH_FILE="" is located? I want to use that as a template but change and add a few lines to this. I just can't locate it anywhere on the system.
I did a fresh installation of openSUSE 11.1 i586. Everything worked fine. Then I used YaST2 Software Management to add a package. Worked fine. Then I did the Online Update to get the Installation up to date. Worked fine so far. I had to restart the Machine because of the Kernel Bugfix Update. Since then, the YaST2 Software Management is not working any more.
When I do start it, it starts the software manager, shows the "Search Phrase" and so on but when I enter a word and press "RETURN" the software manager immediately closes and takes me back to the YaST2 start screen. No messages, no warnings, nothing. With zypper I am able to install software but no longer within YaST2.
When I ran YaST | Software Management | Package | Update if newer Package Available this morning I get this message:
Code: #### YaST2 conflicts list - generated 2011-01-22 09:40:42 #### libxine1-codecs-1.1.19-2.pm.48.15.i586 requires libpostproc.so.51, but this requirement cannot be provided uninstallable providers: libpostproc51-0.6.26387svn-1.pm.2.1.i586[ftp.uni-erlangen.de-suse] [ ] break libxine1-codecs by ignoring some of its dependencies [ ] Following actions will be done: install libpostproc51-0.6.26387svn-1.pm.2.1.i586 despite the inferior architecture ..... [ ] do not install libxine1-codecs-1.1.19-2.pm.48.15.i586 #### YaST2 conflicts list END ###
What is it telling me? What should I do? What are the implications?
I ssh to a remote server which is running in SUSE. And I want to install apache2.0 there. Then I used yast2 to install it. But after installing it, I go to the terminal and type" apache -version" to check if apache is installed there. And it said "-bash: apache: command not found". I don't if I haven't successfully installed it, or I have installed it but just haven't put it into PATH yet. So, my problem is that can anyone tell how to check if I have installed it? If I have installed it, then what is the path of the directory it locates? And if I haven't probably installed it, then can you tell me the how I can installed it? And I am asked to install apache mod_wsgi as well.
I am trying to update Flash-player and yast2-core as prompted by today's update icon.
I am now faced with a loop that goes like this: 1) click on icon 2) window pops up, "2 packages selected" 3) click on apply, subwindow pops up 4) click on continue, "waiting for authentication" 5) after minutes of waiting, click on cancel, nothing happens 6) click on icon killing subwindow 7) now back to 2)
Aborting the process, starting at 1) again, same mess
I have a number of applications (Evolution, Openoffice Writer & Calc, Firefox) that are popping up an error message when I close them, but the window snaps closed before I can read the message. The applications run fine as far as I can tell. how to slow or pause the error message so I can figure out what's going on.
I am currently facing a problem with rsync (or maybe ssh, I don't know yet). I have daily backups that are done via cron using rsync from my computer (client) to a NAS. And systematically during these backups my computer completely freezes (no remote login possible, nothing), so I have to hard reboot. As you might imagine, I cannot do this every day. In /var/log/messages there is just a line like that :
Feb 26 17:23:53 eggplant rsyslogd: -- MARK --
right before the hang. The rsync worked well before and I don't really know what changed in my system config. In /var/log/rsyncd.log I sometimes (but not every time) I get :
2011/02/26 16:39:19  rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(543) [Receiver=3.0.7]
I aldready update the default rsync from opensuse 11.3 to 188.8.131.52, but it does not help. How can I at least know what is going wrong? I am trying to track down the problem but don't know how to start. Last also a log of the rsync command (client) running ssh in verbose using the command "rsync -av --delete --timeout=180 -e "ssh -v -p xxxxxx -i /root/.ssh/rsync-key_eggplant" /mds root@xxxxxxxx:/volume1/autoBackup/eggplant":
OpenSSH_5.4p1, OpenSSL 1.0.0 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for *
Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade:
E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. I wanted to attach the log files; YOUR FORUM RULES WOULD NOT ALLOW ME TO AS IT SAID FILES TOO LONG!
i'v installed ubuntu 10.04 on 3 different desktops and 1 laptop. It has gone flawlessly on all 4. i a want to install it on my hp to dual boot(the others i just wiped the drives) but when i tell it to boot from the cd at first it looks like it might work, with the purple page, but after a few minutes, before i get to the install options i get an error message. my current operating systime is windows and i have an hp pavilion. with 2.5 gigs of ram and a descent graphics card.
could not get my sound to operate so i followed the intructions toMulti-media and Restricted Format Installation Guide - openSUSE Forumsnow i have a working audio and video player but my sound is depreciated to an almost inaudible levelwhen i try to open pulse i get connection failed:connection refusedand when i try alsa gui i get function snd_ctl_open failed for default:connection refusedcan anyone please correct this with me or for me. Noob wanting not to regret leaving windows
I installed openSUSE 11.2 successfully. I tried to install Emesene but YaST2 stops before i have the confirmation that Emesene is installed. I've the Emesene icon in the menu but it won't start, i just wait but nothing happened.