OpenSUSE Install :: Crash Back To Login Screen After Login?
Feb 3, 2010
The graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Every account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100% devtmpfs Use% is 1% tmpfs Use% is 1% /dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
I have just did an upgrade from 9.04 to 9.10. I am planning to go to 10.04 . After the upgrade everything was ok but I noticed the GRUB was still legacy. So I updated my GRUB to GRUB2. Now when I boot, after entering my logon-id and password, it just brings me back to the login-id screen (to logon on). Any indication of what is wrong and how I should fix this ?
I have no encryptions. [added comments] Currently reading thread about login loop bug with 9.10 Followed instructions about possible missing pre-release update but even if it did do updates, I am still login screen looping. Doing additional researches until someone answers with the fix. did : CTRL + ALT + F1 switch to one virtual console sudo service gdm stop
When I try to login with my username, the one I created when I installed the OS, it seems to try to login but almost immediately kicks back to the login screen. No authentication error it just seems to just logout? The only change I made since last successful login was to add ". .alias" to the .profile file - the only entries in the .alias file are comments and "alias" commands. I have one other username but it is not in the sudo's list of users so I can not change anything in the master login.
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
I want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
I would like to post my problems here with Fedora 11 regarding that I am using Dell inspiron 1525, Dual core-N series. I have got two problems:
First;- After I updated my system, I have experienced a a login problem , which is each time I try to login and insert my password correctly it seems that it will login but it comes back to the same login screen as if I did not do anything, but after too many times it works.
Second: I read some posts in a website that talks about configuring the RPM fusion "Repo" and I did all the steps posted there , but after that whenever I try to update or download anything through terminal.... it appears the following:
Whenever I logoff my workstation, I log back on and my desktop doesn't come back. Only the mouse pointer and the wallpaper show up. The panel and the shortcuts don't show. I have to power off using the power button, then power back on to fix.
Main reason I am using openSUSE currently is because my Windows system's went bad. I haven't been able to easily restore and will probably have to do clean windows install. I want to make sure my entire openSuse system (application/OS setting/etc) backup so I can easily restore of it fast. Since this type of back takes awhile, I would preferably like do this while I am still logged into SUSE. I am where to disk cloning thing like clonezilla, but looks like I would need turn of my system entirely to get this done.
Currently my SUSE root and home are in a partition with another NTFS partition on my hard drive. I really don't want to use 'dd' to clone the entire hard disk. I would much rather store of required partitions in other locations. Hopefully, there is easy to get this done without too much of effort and time.
I've been using ubuntu 10.10 for about 6 months and have enjoyed it up to now. However, in the last few days I have been getting repeated crashes where the monitor goes black and the login screen appears.I can't identify a definite trigger although it seems to be more common when using firefox. Could anyone suggest where I should look to solve the problem? I thought it might be related to desktop effects so switched from compiz to metacity but that didn't work. I haven't updated or installed any new graphics card drivers
I'm running Jaunty, and I'm trying to play a film that is .mkv format through VLC. Everytime I try to play it, the screen either freezes up completely, or it sends me to the login screen. It's only with this one film, though. I have a number of other films in this format, and they all work perfectly.I'm a bit of a newb, so I'm not entirely sure where I would find out what went wrong
Just upgraded 8.04 LTS to 10.04 LTS via a distribution upgrade on a Dell Latitude D600 laptop with nvidia-common driver 0.2.23 installed. Everything seems to be working fine with the exception of AOL mail. When I try and access my mail, the screen goes black and then the login screen is displayed. Yahoo mail works fine.
I installed opensuse11.4 few minutes back. The install was absolutely smooth. I have dual boot, Win Xp and 11.4 now. But for some reason I do not see the login screen but instead I see a green screen with squares and stripes. Login in the failsafe mode is successful. How do I fix it?
Also noticed the following,
1) Initially the splash screen picks up the right resolution 1024*768 and then it changes it to a higher resolution. This I think I can fix, because I had faced a similar problem with 11.3 as well.
I did a clean install of xubuntu 9.10. I set up an account for my wife on it and now everytime I try to login under my own it keeps going back to the login screen. Sometimes twice last night I had to log in 4 times before it went to the desktop. I have played with some live CD's of ubuntu and xubuntu, but this is the first full install I have done. Before I set up the wife account, I could login first time. Should I try and reinstall and hope for the best or is there something in terminal that could be done?
when I try to startup the xserver in normal mode iget a message "Invalid MIT-MAGIC-COOKIE-1 giving up. xinit: Resource temporaily unavailable (errno 11): unable to connect to X server xinit: No such process (errno 3): Server error."
I dont know what this means except that something does not work.
I use KDE with Compiz and Emerald.I just installed the Enlightenment window manager. The only way I seem to be able to choose it is by logging out of my KDE session and getting to that login screen and choosing from the list....then logging in again.Where do I change the setting so that the login screen comes up every time I boot up?
That's a picture of my ubuntu 9.1 64bit login screen. The background image I changed myself months after this problem started, so I'm sure that has nothing to do with it. What I DID do that caused this problem was follow the openoffice dark theme fix on this page:[URL]
BACKGROUND: I installed a dark theme that made the openoffice word page black, so I had to find a fix for it on the page above. I'm not using the theme anymore, but it was "Slickness black" on gnomelooks.
In case someone didn't see a problem with the orginal login screen, the section where you click the username and enter your password should look like this:
Also incase anyone was going to ask, my login DID look like the second picture at one point (before the openoffice fix) I just removed openoffice completely and reinstalled it so that isn't the solution.
My problem is basically that when I boot for the first time after a fresh installation and setup, I am always stuck at the login screen or thrown back to it. No matter what account I log onto, whether it's 'root' or any other user account I have setup, it would attempt logging in, black out the screen, turn my monitor off then on again and I'm back at the login screen. This is all using the graphical interface of course. I'm having this same problem with all the linux distributions that I've tried so far:
Gnome Sabayon Mandriva 2010-I've even tried changing all the different boot environments, and same problem Open Solaris and Ubuntu won't even install. It just sits at the loading screen. Why would this happen? I've tried all these OS's on my regular PC, which is a dual core, 4 gb of ram, and they've worked perfectly. So why wouldn't it run properly on that other PC?
I want to have numlock always on in the log-in screen, but I can't get it to work - I always have to activate it manually. I've tried out System Settings > Keyboard > Numlock > Turn on both as normal user and as root, but it simply doesn't work. I'm using openSuse 11.2 x64 w/ Kde 4.3.4 (updated from 4.3.1 w/ Kde repositories).
I've been running openSUSE 11.2 within a VM using VirtualBox 3.1.2 with Vista x64 as the host OS for quite some time now with good results. Yesterday I went to reboot the VM and VBox made some comment about 3D not working and needing to install the VBox guest additions (which were already installed). After rebooting and seeing the openSUSE splash screen, I now get a solid purplish display with no activity. I've tried running "sax2 -r", re-installing guest additions, running the repair CD, and other things but this problem has not gone away. Aside from reloading the OS, does anyone have ideas on how I might fix this?
i installed opensuse 11.4 on my laptop (Lenovo T60, Mobility Radeon X1400). It worked fine for some weeks, the first problem that I found was that libreoffice did not work. Calc crashed immediately (screen looked "destroyed", only the panel was really visible, but the system seemed to work so I could log out without alt+ctr+del), writer had the problem after opening some menu options. Now (one week later) after start and login I could not see the panels anymore, I could start programs but those would not be displayed, I only saw the desktop. After restarting, I cannot even log in anymore, the screen looks destroyed as with libreoffice. I created a new user, this works and this is from where I write.
I am running opensuse 11.4 on my Lenovo G450. The probem is that the login theme is not changing. Its the same default one. I am sure that I am following the way it should be to assign the new theme but no result. What could it be?
when I get into the login page, I can only see the background and the login box in the middle of the page just turns whole white and keeps flashing. no response for any clicks. I was force to ctrl+alt+F1 to switch to init 1 to do my work. But I still want to use my graphical desktop either KDE or Gnome is ok. I am using gnome.