OpenSUSE Install :: 2 Monitors (xinerama) With NVIDIA GeForce FX Go5200?

Nov 29, 2009

On openSUSE 11.1 I was able to configure KDE 4 for 2 monitors with sax2 (although the resolution was bad).On 11.2 neither SAX2 nor KRandR seem to work. The KDE User Guide says that a driver supporting version 1.2 is necessary. However the nvidia driver for eForce FX Go5200 seems to support only version 1.1.Is there a way to use both monitors with SUSE 11.2? I am quite desperate since for my work using only 1 monitor is definitely a handicap.

View 5 Replies


ADVERTISEMENT

OpenSUSE Install :: Xinerama Config - Adjust Xinerama To Place 1 Desktop On Each Of 2 Monitors And Not Stretch A Single Over Both

Jan 10, 2010

I would like to adjust Xinerama to place 1 desktop on each of my 2 monitors and not stretch a single over both. With the current set up there is a problem with window placement upon opening new widows or context dialog boxes. I realize that I could adjust placement properties and select window placement with the mouse but this is still lacking in productivity. My monitors are not next to on another so this is more of a problem than it seems.

View 4 Replies View Related

General :: Toshiba Tecra M2S With NVIDIA GeForce FX Go5200 Driving Dell External Monitor Quits Working

Mar 29, 2010

I've been trying to get it to work on my laptop off and on for several years now, experimenting first with Redhat (version 6.1, I think) and now trying with Ubuntu 9.04. I've done a full install using the entire hard drive (no dual boot). So I'm trying it for real this time. I'm having a problem with my video drivers. The video is ok (not great) and I don't seem to have any options to adjust it.

When I go into system > preferences > display, I see monitor "unknown", set at 1024x768 with a 75 Hz refresh. If I click on "detect monitors" nothing happens. It says under system > administration > hardware drivers that "no proprietary drivers are in use on this system". I've got two options:

[code]...

For the first part of boot, I have access, but then when it comes up into Ubuntu, the big monitor (a Dell 2500, I think, plugged into the stock Toshiba docking station via DVI) quits working, and all I have is a dim picture (dark, like something's sapping power from it) on the laptop display.....

View 4 Replies View Related

Hardware :: Triple Monitors Xorg With AMD&NVIDIA: XRANDR And Xinerama Not Working?

Mar 24, 2011

I'm trying to set up a tri monitor setup. Unfortunately I must use 2 cards, one an AMD HD4350 and a PCI Geforce FX200. (Old skool I know) Due to the restrictions, I am forced to use the open source drivers (else nvidia glx will clash).

1: Use XRANDR to span the displays (this is what I did previous to the introduction of the third monitor and nvidia card to my system) I tried to do this, by setting up a second X screen on the NVIDIA card, disabling Xinerama; but after much googling I can't figure out the syntax for panning across 2 screens (X screens) in XRANDR, even tho it's >1.3, which supposedly supports multi card output.

2:Use Xinerama, sacrificing randr, and composite extensions. I also attempted to do this, with some limited success. I could get the NVIDIA screen to be right of the ATI, but I couldn't get 2 independent outputs running on the ATI card, even with "ZapohHeads" appended to one of the device sections for my ATI card.

View 1 Replies View Related

OpenSUSE Install :: NVIDIA Xinerama Compiz - Almost There?

Nov 26, 2008

I heard a lot about NVIDIA Xinerama & Compiz not working but on looking further, in recent times people have got them to work. I've setup Xinerama with 4 monitors working across 2 dual video cards and it works great. I have the latest NVIDIA drivers (using the one-click) and I just installed the latest compiz using one-click as well.

The cards are as follows:
Chip: 0 is -> NVIDIA GeForce 8600 GT 01:00:0 0x10de 0x0402 AGP nvidia
Chip: 1 is -> NVIDIA GeForce 8600 GT 02:00:0 0x10de 0x0402 AGP nvidia
(I chose these because they have no fans and when working from home, quiet is nice to have!)

The following options are recommended to run compiz with NVIDIA and I have enabled them all at one point. However, looking through carefully I don't need to since using the latest drivers and having pretty good video cards all this seems to be (according to the documentation) automatically enabled.

[Code]...

View 4 Replies View Related

OpenSUSE Install :: Nvidia Geforce 8200 Driver Install Error - Version.h Not Found

Jan 11, 2011

After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.

Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h

PATH:

Using: nvidia-installer ncurses user interface

ERROR:

View 9 Replies View Related

OpenSUSE Install :: Installing NVidia Driver For Geforce GTX 275 Fails

Aug 20, 2009

I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.

View 6 Replies View Related

OpenSUSE Install :: Nvidia Geforce 7800 Gt Graphics Card Not In HCL?

Jan 22, 2010

I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?

View 4 Replies View Related

OpenSUSE Install :: Nvidia Geforce 8600 Gt - Display Is In Black

Jan 28, 2010

When i start the install of the open suse linux 11.2 load the kernel but later my display is in black, i think that is my graphic card becouse in other linux only load linux without graphic mode, what i have to do for install open suse?, i can download a driver with the installer or something like?

View 4 Replies View Related

OpenSUSE Hardware :: NVIDIA GeForce GT 325M And NVIDIA Optimus Support?

Apr 3, 2011

I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.

nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?

View 1 Replies View Related

Ubuntu :: Xinerama With Triple Monitors - 11.04

Jun 21, 2011

Did a new install with a system that worked well on 10, with Xinerama. I have nvidia 9500 GT cards, but I dont think its driver related. Screen 0 is the center Screen 2 is to the right And Screen 3 is to the left.. When Xinerama is disabled things work flawlessly, but not using Xinerama is a killer to me. The nvidia configuration utility generates the following xorg.conf when Xinerama is disabled. It gets the locations right and the mouse moves correctly between screens.

[Code].....

View 4 Replies View Related

Fedora :: Cannot Run Quadro And GeForce At Same Time With FC13 And Xinerama In Xorg.conf

Jun 6, 2010

I am trying to use three monitors with two video cards on Fedora 13:

$ lspci | grep -i vidia
07:00.0 VGA compatible controller: nVidia Corporation NV41 [Quadro FX 3450/4000 SDI] (rev a2)
0c:02.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1)
$

The Quadro dual-card has no problem driving two 19" monitors, but the GeForce will not wake the third 17" monitor from power save mode. The BIOS indicates that the Quadro is the primary card. I am trying to use Xinerama to activate the GeForce. So far I have only seen the GeForce and 17" monitor work if the Quadro is physically removed. In all cases I have been using nouveau. I'll attach my xorg.conf, Xorg.0.log, and smoltprofile.txt. My xorg.conf shows two monitors: monitor0 (19") and monitor1 (17"). monitor0 is actually two identical monitors which the quadro treats as one large monitor.

View 2 Replies View Related

Ubuntu Multimedia :: ATI Radeon - 2 Cards And 3 Monitors (Xinerama)

May 21, 2010

After working on trying to get my 3 monitors to work with Ubuntu 10.4 and my ATI Radeon HD3200 (IGP) and HD4850 cards, I just had to share the xorg.conf. I am using the default open source drivers that came with 10.4 and I kept KMS enabled (it wouldn't work without it).

Here is my conf:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "4850-2-Screen"
Screen 1 "4850-1-Screen" RightOf "4850-2-Screen"
Screen 2 "3200-Screen" RightOf "4850-1-Screen"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "on"
#OPtion "Clone" "off"
EndSection .....

View 9 Replies View Related

General :: Xinerama - 3 Monitors Setup (Slow And Laggy)

Dec 23, 2010

I currently have my monitors set up as an extended desktop using Nividia's Xinerama function. Everything works sweet, except it's acting slow and lags out. It all works out fine when Xinerama is disabled. At the moment, I'm using CentOS with Gnome, but I've tried other distributions with the same outcome. If I can't a fix I'm going back to windblows.

Computer specs:3 monitors
2 Nvidia GTX 275 GFX cards
EVGA 4-way Classified motherboard
12 GB ram
CentOS - with Gnome

View 3 Replies View Related

Ubuntu :: Three Monitors - Xinerama And Cannot Get Desktop Effects Running At Normal Or Extra

Feb 28, 2010

Currently I have a perfect setup of 3 monitors,2 GPUs running under Xinerama. I cannot get desktop effects running at Normal or Extra, when I try to enable either one I get the following message "The Composite extension is not available". Without Xinerama it works along with Compiz. I am running Ubuntu 9.04 x64 with a ATI HD4870 and ATI HD4350 GPU. I have the latest ATI display drivers (set up properly to my knowledge). Here is my xorg.conf file.

[Code]....

View 3 Replies View Related

OpenSUSE Hardware :: Would Nvidia Geforce 4 Graphics Card Be Supported For OpenSUSE?

Nov 8, 2010

Would a Nvidia Geforce 4 graphics card be supported for openSUSE? My friend gave me it, and said that it was. But he doesnt use Linux.

View 4 Replies View Related

OpenSUSE Hardware :: Installing Nvidia Drivers GeForce 210 In 11.4?

May 2, 2011

I am having a challenge to install drivers on this machine with the OS and graphics card stated in the subject. To date I have tried different ways and they are broken in the steps or in the results I get on my machine. The how-to written by ajohnw Installing an nvidia driver - easiest I have found to date. results in a file or directory not found when I try to execute

Code:

/etc/bin/nvidia-xconfig

The article SDB:NVIDIA the hard way results in the following error (copied from the error log):

Code:

ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist.The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured.

Researching how to resolve that error and I can't find anything relevant to openSUSE 11, closest version being openSUSE 9.Lastly, I've tried this SDB:NVIDIA drivers and for some reason it does not generate the xorg.conf file. At least that's what I am concluding. I go through the steps, reboot the system and boot only to a command prompt. Navigating to /etc/X11/ there is no xorg.conf and I have to copy xorg.conf.install to xorg.conf to get back into the Desktop.

View 9 Replies View Related

Fedora :: Can't Install The Drivers For Nvidia Geforce Gt 240m

Jun 16, 2010

I was following this guide to install my nvidia drivers...[URL] but when I got to the step about checking to see if my card is supported I'm to check here...[URL] I don't see my card anywhere in this list So I kept reading and found this posting ... [URL] and it says that it is support under the geforce 200 ... The last time that I installed this driver my X session quit working ... I was able to ssh back into the laptop and undo the driver install so now i'm a little gun shy about trying it again...

View 11 Replies View Related

OpenSUSE Hardware :: Find Nvidia Driver GEFORCE G102M

Jun 22, 2010

find a nvidia driver GEFORCE G102M. and my laptop model is ASUS K40IN.

View 4 Replies View Related

Debian Hardware :: Install NVidia GeForce Driver For GT220?

Oct 25, 2010

install the driver for my GeForce GT 220. I'm using the latest Debian and here's what happens: I get out of X and run ./NVIDIA... .run. It then says that I lack the cc tool for gcc. If I update gcc, it says that the gcc version used to compile the kernel mismatch my gcc version. If I ignore that error, it says that it can't find my kernel source.

View 10 Replies View Related

Fedora Installation :: Install From Live CD With Nvidia Geforce 7150M?

Mar 17, 2009

Fedora Core 8 did not recognize my Geforce 7150M display adapter (in a HP DV6000 laptop), neither did Fedora Core 10 I tried yesterday although this laptop is now already over one year old (I have used Vista because it works out of the box but it sucks as you might have guessed). That could be something I'd like to complain about but I choose not to, I simply want to know how to install Fedora 10 from a live CD (that is all I have now, no DVDs and not too much cash to buy some..) Live CD boots and I can access command line. If I have understood correctly, Nvidia proprietary driver supports my display adapter but it is not included in live cd so I could use X after installation. Problem is that I don't know how to successfully run the installer from text mode. I tried to execute 'anaconda' but it cannot find packages to install when it comes to that. There seem to be no instructions how to install from a live CD that I could find using Google. For sure someone knows what command to execute to begin installation?

View 2 Replies View Related

Fedora :: Nvidia (GeForce Go 7900 GTX) Driver Install Ok But No GLX Visual

Feb 11, 2010

I've enjoyed accelerated 3d graphics for years with this laptop, but since moving from CentOS 5.3 to FC12 I have had no 3d or opengl working at all.My install seems good. I'm running right now with the 'nvidia' driver in 1920x1200 res with no real problems except the lack of 3d. I have just finished trawling the forums again, coming back to: F12,F11 & F10 Nvidia driver guides [URL] I uninstalled all my nvidia packages, re-installed only "kmod-nvidia xorg-x11-drv-nvidia-libs.i686" and dependencies, ensured 'nvidia' was my selected driver in xorg.conf (using nvidia-config-display disable, then enable), and rebooted, and still no joy. No errors in Xorg.0.log. My 'glx' extension is loaded. 'nouveau' is rdblacklisted. SELinux is disabled. I have 3Gb RAM and so have chosen not to use the PAE kernel or modules.

Code:

[neek@uberneek ~]$ glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig

[code]....

View 4 Replies View Related

Fedora Hardware :: Can't Install NVidia GeForce FX5900 Driver

Jan 15, 2011

I tried to install the driver '01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900] (rev a1)' watching Fedora Solved → Video Solutions → Installing the Drivers as Provided by nVidia "Installing the Drivers as Provided by nVidia" ,and FedoraForum.org > Fedora Support > But I failed.

Error log*********************************************** ********************
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Jan 15 12:52:09 2011

[code]....

I typed "su -l" and telinit 3. But "ERROR: You appear to be running an X server" is written. What I can install this driver as well? or how I can booting up the Fedora 14 in text mode?

View 5 Replies View Related

OpenSUSE :: Configure Multiple NVIDIA Monitors

Mar 13, 2011

As both root and myself, I've gone into the:

configure desktop -> display and monitor
thing and set "primary output" to "DVI-I-1" and
set the DVI-I-2 connection to the "Right of DVI-I-1" position

[code]....

Doesn't work when done either as root or as me. So, there *must* be a way. How?

View 9 Replies View Related

OpenSUSE Hardware :: Cannot Enable Desktop Effects - NVIDIA GeForce 8400 GS

Dec 27, 2009

I just added a new NVidia graphics card (PCI) that's 512 RAM, DDR2, the GeForce 8400 GS. OpenSUSE boots fine and shows the desktop but it tells me I cannot enable desktop effects, which should be no problem with this computer and card.

Computer Processor/RAM:
AMD Sempron(tm) Processor 3100+
Speed: 1,808.49 MHz
RAM: 1.4GB
Swap: 2GB
[Code]....

View 9 Replies View Related

OpenSUSE Hardware :: Nvidia Card Change 7300 To Geforce 275 - Get The New One To Be Recognized

Feb 3, 2010

I changed my old video card for a newer in order to use all the resolution of my screen 1920X1200 and not 1920X1080, in my just installed 11.2, rebooted and got to log in graphic mode,looks good. But isn't. It is working because the new card is seen as the old !How can I get the new one to be recognized, and acces the newresolution ?

View 1 Replies View Related

Ubuntu Installation :: Unable To Install 10.4.2 LTS On PC With NVidia GeForce 6150 Card

Mar 23, 2011

This is to request the communities assistance with the following: As the title suggests, I am attempting to install 10.04.2 LTS on a PC equipped with an ASUS M2NPV-VM mobo and integral NVidia GeForce 6150 chipset/card and AMD dual processors.

Result: While the CD with the installation software loads, the splash screen comes up distorted and is displayed as several black and white horizontal bars. I have tried this with low end monitors with a VGA input with the same results. It appears to me as if though the video driver on the installation CD is not suitable for the mobo's chipset, but I may be wrong.

View 5 Replies View Related

OpenSUSE Hardware :: 11.2 - Three Monitors Can/want To Use Only Two - How To Save Nvidia-settings

Mar 20, 2010

I've a laptop with 2 external monitors connected to it.Using SaX2 I can't configure it in a way where it only uses the two external monitors and not the laptops own screen.With nvidia-settings I can configure it properly, as I am however unable to save it due to a missing xorg.conf file how am I supposed to save the this config so it isn't 'forgotten' between reboots?

View 2 Replies View Related

Ubuntu Multimedia :: NVIDIA GeForce FX 5500 Driver Install Failed On Maverick

Oct 13, 2010

tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.

View 3 Replies View Related

OpenSUSE Hardware :: No HDMI Audio On NVidia GeForce / NForce IGPU On Mb ASUS P5N7A-VM 11.2 Or 11.3?

Aug 6, 2010

I have an ASUS P5N7A-VM motherboard and was using Optical out for sound without issues running OpenSuse 11.2. I then got rid of my receiver and wanted to just use HDMI sound. I couldn't get it to work so I upgraded to OpenSuse 11.3. I simply went to the Sound control panel applet and changed it to Internal Audio Digital Stereo (HDMI). I can not get any sound from it on OpenSuse 11.3 either. I have ran sound tests from the command line "speaker-test -Dplug:front -c2 -l5 -twav" which all run without errors, but nothing comes out of the speakers. I have ran the suggestion of one post "alsa-info.sh" and here are my results:

http://www.alsa-project.org/db/?f=27...860267e7079411. I have also tried the following post which did not resolve the problem since it seems to be Ubuntu based. I have undid everything from the post as well to make sure I don't stray to far from normal.

[HOWTO] HDMI audio on nVidia GeForce/nForce iGPU - XBMC Community Forum

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved