OpenSUSE Hardware :: Canon Pixma Printer Not Working Anymore After Installing 11.3?

Aug 4, 2010

I have a canon pixma mp640. Under opensuse 11.2 64 bit the printer worked (printing and scanning via wifi). I recently reinstalled my system with 11.3 64 bit, and after installing the canon rpms and creating the printer I get the following error in /var/log/cups/error_log:


Backend returned status 1 (failed)
printer-state-message="Illegal backend: Success"

In opensuse 11.2 I needed to create some links:


cd /usr/lib64/cups/filter
ln -s ../../../lib/cups/filter/pstocanonij
cd /usr/lib64/cups/backend


View 6 Replies


OpenSUSE Hardware :: Setup Printer A Canon Pixma MP530?

May 8, 2011

When I try to set up my printer a Canon Pixma MP530, there is no driver! Only the Generic ones and they don't work. On Ubuntu using the Pixma MP500 driver works just fine, but there is no option for that on suse. Only for HP and Generic. The only solution I have found was turbo print, and that costs $30. I am hoping to find a solution, I really like SUSE, but I may have to go back to Ubuntu.

View 9 Replies View Related

OpenSUSE Hardware :: Installing Canon Pixma Ip3000 On 11.2?

Mar 19, 2010

I have just installed SUSE 11.2, but although my ip3000 shows in the hardware, I cannot get a correct print out on A4 paper and I am informed that no driver is available. There must be a work-around for this?

View 6 Replies View Related

Ubuntu :: Can't Install Canon Pixma Ip1800 Printer On 10.10

Oct 15, 2010

There is not a driver for the Canon Pixma ip1800 Printer in Ubuntu. How do I go about getting this printer to work with Ubuntu 10.10.

View 9 Replies View Related

Ubuntu :: Canon Pixma Ip90v Bluetooth Printer Cant Print?

Mar 10, 2011

I am looking for a good new ALL IN ONE printer that will be compatible with Ubuntu right out of the box (scanner and everything).

I am also looking for a portable bluetooth printer that will be compatible. I currently have a Canon pixma ip90v bluetooth printer but I cant get it to print AT ALL and Ive tryed everything.

I am currently running 3 computers with Ubuntu 10.10 and one with 11.04 Alpha 3.

View 4 Replies View Related

Ubuntu :: Canon Printer PIXMA IP1200 Driver Required

Apr 1, 2011

I have a Canon PIXMA iP1200 and Ubuntu does not recognise it. Need a driver for this printer?

View 6 Replies View Related

General :: Need System Scanner For Canon PIXMA MP460 Printer

Apr 7, 2011

Are there any (easy to install) (X)SANE backends for Canon PIXMA MP460?

View 1 Replies View Related

Debian :: Using Squeeze And A Canon Pixma IP4600 Printer - Printers Color Isn't True

Oct 29, 2010

Using Squeeze and a Canon Pixma IP4600 Printer. The color on the printed pages used to be true and now it isn't, it still print is color just not the correct colors.I am color deficient or color challenged (what used to be called color blind) which dosen't mean I can't tell the difference between what is on the screen and what is printed It's not the printer as I have tested it with other Linux and a windows system and it's good.

View 2 Replies View Related

Ubuntu Networking :: Install A Canon PIXMA MG5250 Wireless Wifi Printer?

Dec 30, 2010

I have a Canon PIXMA MG5250 stand alone wifi printer thats connected to all my windows computers and laptops. Now I want to install a computer with Ubuntu 10.10 and connect this printer also wireless by wifi.

View 9 Replies View Related

Ubuntu :: Installing Canon Pixma MP140 In 11.04?

Aug 4, 2011

I was using 10.04 until a few days ago, and with 10.04 my printer worked fine, I used the default drivers for MP150 and that worked fine. But now I'm using 11.04 and I'm trying to instal the printer with the default drivers for MP150 but it's not working. When Ubuntu tries to find the driver is not giving me any result for MP140, so I'm selecting the option "CANON PIXMA MP150 - CUPS+Gutenprint v5.2.6 Simplified [en] (Recomended)" and allows me to click next and to give a name to the printer and to hit next, but then the windows closes and that's it then I go to System > Admin > Printer and I double click the printer I just created and I click Print Test Page and then it gives me "Printer Status: Processing - Printing Page 1.8%" and after 4minutes or so gives me "Installation or actualization of package "python-xmpp 0.4.1-cvx20080505.2" failed" and that's it Is there a way to fix this? I have no idea why this is not working since it worked fine in 10.04, and I really need to use the printer and the scanner as soon as possible

View 3 Replies View Related

Software :: Installing RPM For Canon Pixma Ip4850 In PCLINUXOS

Mar 9, 2011

My distribution of choice is pclinuxos, the repos do not have a driver for my pixma ip4800.I have downloaded the two drivers for this printer from the canon site but so far have been unable to install them or find a specific thread that can help.

View 2 Replies View Related

Ubuntu :: Get The Canon Pixma MP495 Working In 10.10 (Maverick)?

Oct 21, 2010

I have finaly gotten the Canon Pixma MP495 working under Ubuntu 10.10, with full resolution capabilities of the printer.This printer is only advirtised as having a max resolution of 4800x1200 DPI. However, I called Canon to get the full range of print resolutions and was informed that this printer is capable of 9600x2400 DPI.I haven't tested this below Ubuntu 10.04 but it should work fine.

For setting your MP495 printer up on your network without the use of a Windows or Mac machine (Fresh out of the box with Ubuntu) you will need to match your Routers SSID to the printers default SSID, and remove any security you have enabled. This will allow the printer to connect to your network.

Printer Defaults:

IP ADDRESS: Automatic

Once you have done that you will need to activate the wireless lan on the printer.Press the Maintenance button on the printer 13 times until you see what looks like a capital G without the middle line. Then press the color start button. (refer to page 10 of your Network Setup Troubleshooting manual for an actual picture of the symbol) You should see the wifi light on the front of the printer turn on and be solid not be blinking. (If it is blinking check your routers SSID settings and match the Default SSID of the printer as listed above.

Now download angryipscanner AngryIPScanner and install it by double clicking it. It should open in the Software center or with the Gdebi installer. (this may take a few minutes to install.)Once you have installed AngryIPScanner, run it and change the ip range to include from 1 - 254 in the last octet. Then click start. When it finishes look for an active connection with a Hostname like A001BF000000.local. Yours may be different but should be very simular.

The IP address given for that hostname is the IP address of your printer. Open Firefox and type that address in the address bar and press enter. From there you can configure you printer for the SSID, and encryption that you had on your router before the change, and set a static IP for the printer so you can manage it easily.After you change the SSID and encryption on the printer you will have to go back to your router and change the SSID and encryption back to what it was before so your printer can connect again.Now your network should be back the way it was and your printer should be connected Now that you have successfully connected the printer to your wireless network continue with the rest of the installation. Download the drivers for the MP495 . You will be downloading cnijfilter-mp495series-3.40-1-deb.tar.gz.

Extract cnijfilter-mp495series-3.40-1-deb.tar.gz to your Home directory.Change the permissions of the file to run and an executable by Right licking on and then left clicking Properties. Click on the Permissions tab and put a check mark in the Allow Executing file as program box. Then open a terminal and type: [CODE]sudo ./[CODE] Follow the prompts and if you are using the printer over the network select network when prompted. I you are using it via USB choose USB. Don't forget to scroll down to complete setting up your printer to use full resolution and set up the scanner.If the first method didnt work try this.Open a terminal and enter


cd /home/*/cnijfilter-mp495series-3.40-1-deb/packages. (Enter your username where the astride is.)
For 64 bit systems you need to replace cnijfilter-common_3.40-1_i386.deb, and cnijfilter-mp495series_3.40-1_i386.deb with cnijfilter-common_3.40-1_amd64.deb, and cnijfilter-mp495series_3.40-1_amd64.deb. For the printer setup. For the scanner replace scangearmp-


View 9 Replies View Related

OpenSUSE Hardware :: Installing Intuos2 Tablet And Canon MP620 Printer?

May 7, 2010

Need to install a Wacom Intuos2 tablet. ALso Have a Canon MP620 multi-function printer that YaST does not see. It tells me that it is a bad port. I have pinged it and it is there but YaST won't let me install it.

View 8 Replies View Related

OpenSUSE Hardware :: Canon Pixma IP1880 - No Color

Oct 15, 2010

It's weird because it did not even print different shades of gray (for the colors), as though I set it to print to black-and-white, when clearly I did not.

View 3 Replies View Related

OpenSUSE Hardware :: Configuring Canon PIXMA MP510 Under 11.3

Jan 14, 2011

I'm trying to get my Canon Pixma MP510 scanner to work under openSUSE 11.3. Canon Linux Support doesn't seem to have anything for 11.3, but sane claims to provide basic functionality. The printer is working fine, but I don't manage to configure the scanner.

I tried to configure via YaST, but the following happens: The scanner is found, but (correctly) labbelled as "not configured". Clicking "Edit", the PIXMA MP510 is listed and a driver suggested: "Canon PIXMA MP510: (Package sane-backends) Driver pixma should provide basic functionality (USB-ID 0x04a9:0x1717)" If I select this option an click on "Next", the window crashes and I get the following error in the KDialog window, but I have no clue what it means: "YaST got signal 11 at YCP file Wizard.ycp:849 /sbin/yast2: line 399: 5663 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS"

Is this a YaST problem? Or driver related? I thought about configuring the scanner without YaST, but don't know how to do it. I tried to google a HowTo, but couldn't find anything useful.

The command "sane-find-scanner" successfully detects the scanner, "found USB scanner (vendor=0x04a9 [Canon], product=0x1717 [MP510]) at libusb:001:004", but the command "scanimage -L" yields "No scanners were identified."

how to make YaST configure my scanner? Or how to configure it without YaST?

View 9 Replies View Related

Hardware :: Canon Pixma Mx330 Opensuse 11.1 Compatibility?

Jan 29, 2010

I have recently purchased a canon pixma mx330 all in one printer. I tried using yast on 64 bit opensuse 11.1, kernel version to locate the necessary driver to no avail. Is this a futile attempt or is there a driver that yast can't find.

View 1 Replies View Related

OpenSUSE Hardware :: Canon CAPT Printer (LBP5050n) Stopped Working In 11.4 ?

Jul 17, 2011

After upgrading to OpenSuse 11.4, my CANON LBP5050n printer stopped working.

I have cndrvcups-capt-2.20-1.x86_64 installed and these are the command which used to work:

View 1 Replies View Related

OpenSUSE Hardware :: Get A Canon PIXMA IP1500 To Work With Laptop?

Jul 9, 2010

I just acquired this printer. I would like to get it to work with my laptop.I'm running OS11.2 I've looked in yast but it isn't listed. Looked in Canons website and didn't find a driver for linux.

View 9 Replies View Related

OpenSUSE Install :: 11.3: Can't Get Canon Pixma MG 5150 Scanner To Work

Jan 7, 2011

I'm trying to get my Canon Pixma MG 5150 scanner/printer to work. While the 'printer' is doing well the 'scanner' appears to be stubborn. I use the scangearpm-MG5100series-1.60-1 driver provided by Canon which is said to be fine with Suse 11.2.

The trouble is, that though the scanner scans it does not deliver anything back. Here are the details:

When I run scangearmp as root in a terminal I get the following output:

(scangearmp:6902): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.


View 9 Replies View Related

Ubuntu :: Installing The Canon Printer Driver?

Jun 21, 2011

i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04

View 7 Replies View Related

General :: Installing Canon MX-860 Wireless Printer In Xubuntu?

Sep 16, 2010

I've been running Xubuntu 9.04 for the past couple of months but have difficulty installing my Canon MX-860 wireless printer. Everything else works perfectly and connects wirelessly to internet. Since I run a couple of other Win based computers, printing from the Toshiba 1100 laptop hasn't been a problem. It would be an advantage. I tried to install the latest Xubuntu distro on the Toshiba and it installed but could not connect to the wireless Atheros card. Where should I start? get Distro 10.04 working first or try and install the printer with the existing distro?

View 7 Replies View Related

Debian Hardware :: Installing Canon Printer Drivers To Jessie

Aug 4, 2015

My purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).

I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.

Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.

When I try to install .deb package in the driver file archive I get following output:

Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb
[sudo] password for ert:
Selecting previously unselected package cndrvcups-ufr2-us.
(Reading database ... 155527 files and directories currently installed.)
Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ...
Unpacking cndrvcups-ufr2-us (3.00-1) ...

[Code] ....

And the next thing I tried:

Code: Select allsudo apt-get install cndrvcups-common
[sudo] password for ert:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package cndrvcups-common is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:

  cndrvcups-ufr2-uk cndrvcups-ufr2-us

E: Package 'cndrvcups-common' has no installation candidate

I cannot solve this package error.

View 2 Replies View Related

Ubuntu :: Installing Canon Printer Driver - Missing LSB Information

Jun 8, 2010

I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is

sudo update-rc.d ccpd defaults 50
which gives me the error

update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.

I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.

View 2 Replies View Related

OpenSUSE Hardware :: Canon Digital Camera Not Showing Anymore

Jan 1, 2011

I have a Canon S95 digital camera that used to work just fine. I plugged it in, the device notifier showed a couple of actions for it, I chose digiKam and downloaded the photos. Now I tried to get new photos out of the device, but it's not showing in the device notifier any more. DigiKam shows "Canon Inc. Canon Digital Camera (auto-detected)" but doesn't do anything when selecting it.

In dmesg I see:
[ 988.197025] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 988.313730] usb 1-3: New USB device found, idVendor=04a9, idProduct=3212
[ 988.313734] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 988.313738] usb 1-3: Product: Canon Digital Camera
[ 988.313741] usb 1-3: Manufacturer: Canon Inc.
[ 988.313743] usb 1-3: SerialNumber: [number]

So it works but KDE doesn't seem to be able to notice it. I'm using openSuse 11.3 with KDE 4.6 RC1, and it might be that 4.6 betas/rc broke the functionality though I'm not sure.

View 5 Replies View Related

Ubuntu :: Printer Canon MP620 Not Working With Lucid

May 2, 2010

I'm a newcomer to Ubuntu. Have struggled with 9.04 and managed to get my Canon MP620 to work in that version. Now I have upgraded to 10.04 and have problems to get my printer to work again.

View 7 Replies View Related

Ubuntu Installation :: Get Canon Printer Working Wirelessly?

Apr 13, 2011

after looking around for hours, i finally gave up and decided to write this post. I need to know exactly what to do to get my canon mx860 printer connected to ubuntu wireless. ive tried nearly everything, but nothing really makes sense and it just doesn't work.

View 1 Replies View Related

Ubuntu :: Driver For Canon Pixma MX330?

Jan 26, 2010

Does anyone have an idea of where i can find a driver for this printer? The system does not have one and if I try a driver for say the PIXMA MP220 which is CUPS + Gutenprint v5.2.4 [en] (actually, all the PIXMA drivers are that one) and I print the printer seems like it receives some command but nothing else happens. The printer says 'Printing from PC' and then goes back to the main screen.

View 5 Replies View Related

Ubuntu :: Canon Pixma IP2600 Ready For Use But No Print Out

Feb 12, 2010

I just bought a new printer yesterday. It is a Canon Pixma iP2600 series. I connected everything properly and my computer found the drivers and told me the printer was ready for use. However, when I tried to print out a test page the computer said it was printing, the printer was flashing as it should, but nothing was printing out. Is there some switch I need to turn on or off? Is there something that I need to type in or delete somewhere? The old printer was a HP deskjet and it did work even if it was a little slow being that it is over 8 years old.

View 6 Replies View Related

Ubuntu Networking :: Driver For Canon Pixma Mg6120?

Feb 5, 2011

I am new to Linux and to make matters worse, am trying to install a new printer but cannot find the drivers for it. it is a cannon pixma mg 6120.

View 1 Replies View Related

Ubuntu :: Using Canon Pixma MG5220 - How To Print To It From My Computer

Apr 7, 2011

I recently purchased the canon pixma mg5220 and am currently figuring out how to print to it from my computer.

First of all, I dont know how to connect to it (its a wireless printer btw and is currently connected to my wireless router). I went to the "add new printer" part of the printer utility and selected "Find Network Printer." I dont know what to type in for "host" however. Right now i have a temporary fix of sharing the printer on my laptop (which runs windows) and printing through that.

Second of all, drivers. I found and downloaded the drivers (to my downloads folder) from the link provided, but I can't figure out how to install it. The post says to run the but it seems to be just a text file, and when i right click it, "properties" is not an option, so i cant mark it as executable. How would can i run this file to install the drivers?

View 1 Replies View Related

Copyrights 2005-15, All rights reserved