OpenSUSE Hardware :: USB Stick Very Slow Copying - Taskbarpanel Notifier Doesn't Show Progressbar

Sep 11, 2010

I installed openSUSE 11.3 with KDE4 on three different computers. Only one of them has the following problem: When I use my Sandisk Cruzer USB-stick (FAT32 formatted), copying is extremely slow. Also, the taskbarpanel notifier does not show a progressbar or a cancel button during copying. It only shows that is copying but I can not cancel. On the other two computers, the same stick works ok. The computer has the following mainboard: Asus M4A87TD/USB3

View 1 Replies


ADVERTISEMENT

OpenSUSE :: Device Notifier Fails With USB Stick?

Sep 6, 2011

OpenSuse 11.4 32bit KDE 4.6.0

When I plug in my 8 GB SanDisk Cruzer USB stick into my desktop box, the KDE Device Notifier fails to recognize it. It will recognize every other USB stick. "fsck" reports no errors. I can mount it manually. I can read and write to it. The Device Notifier on my netbook recognizes it. So does another desktop box. By the way this started recently so I suspect some software update.

View 1 Replies View Related

Ubuntu Networking :: Huawei E122 Mobile Broadband HSPA USB Stick - Doesn't Show Up Under Lsusb

Feb 7, 2011

I have a Huawei E122 Mobile Broadband HSPA USB Stick on three ireland. i can't get it to connect. but i think the problem might be, when i stick it in nothing happens. it doesn't show up under lsusb. i don't think it "mounts"

View 2 Replies View Related

OpenSUSE :: Slow File Copying With Dolphin?

May 10, 2010

When I copy files from one partition to another, or from one drive to another, the transfer rates hover around 5-8MB/sec which is kind of slow given that all my hard drives are SATA II. I have the same problem when copying either a single file or a group of files.

I'm running openSUSE 11.2 x64 here (KDE 4.3.5) with three SATA II hard drives that are all formatted with ext3. I have dropped to the CLI and used mv and cp instead - this seems to improve things but I shouldn't have to do this.

View 6 Replies View Related

Ubuntu Installation :: Update-notifier Doesn't Notify Anymore

Mar 22, 2010

It never notifies me about any updates.

In my startup following line is present:

update-notifier --startup-delay=60

In my repository settings I have chacked that it should llok for updates daily.

View 8 Replies View Related

Debian :: Copying Files To USB Stick Changes Case

Nov 30, 2010

I've observed that if I copy a directory containing some files to an USB stick, files whose names are all upper-case are copied with all lowercase names. Is this expected behavior? The USB stick is shared with a Windows box.

View 13 Replies View Related

Ubuntu :: Mb/sec Decreases Slowly Down While Copying To USB-stick?

Mar 26, 2010

I have a "DataTraveller" 16 GB - that gives me slower and slower speeds on copying files to it. It starts with 8-9 Mb/sec, and goes down all the time, until it's down to kb/sec.

View 9 Replies View Related

OpenSUSE Install :: Live Usb Stick Doesn't Work - I/O Errors

Apr 21, 2011

I've been trying to figure out how to run/install openSUSE from a usb stick for several days. I downloaded the 11.4 .iso from distrowatch & used the following command in Linux Mint to put it on the usb stick.

Code:
sudo dd if=openSUSE-11.4-KDE-LiveCD-x86_64.iso of=/dev/sdc

It gets to the loading screen and get stuck. It has a small bar going across, that never finishes. I've hit escape to try and get some info, but don't know what I'm looking for and it's too much to write down. I did notice there were several I/O errors. I did check the usb for defects and it returned ok, and the md5sum was correct.

I've also tried safe settings which takes me to a blueish/black screen and stays there. No ACPI starts to load and then drops to a shell.

how to get this accomplished? I've installed many Linux OS's and I've never had this much trouble.

ps. I"ve read the "please read" pre installation page on here, and things just don't make a whole lot of sense to me.

View 2 Replies View Related

Ubuntu Installation :: Update-notifier Will Not "show Updates"?

Feb 22, 2010

The update notifier displays as usual but it will no longer "show updates" either when double clicked or when right clicked and the option is highlighted. the other options in the context menu function as normal.

Code:
s7726@blackbox:~$ update-notifier --debug-updates
(process:3463): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
(update-notifier:3463): update-DEBUG: update_check()

[Code]...

View 3 Replies View Related

Ubuntu :: Error While Copying From Hard Drive To Usb Stick?

Jul 11, 2010

when I am trying to copy any of my files to usb stick, it gives me this alert: the folder cannot be copied because you do not have permissions to create it in the destination.

View 2 Replies View Related

Ubuntu :: 9.10 - Nautilus Copying MP3 To USB Memory Stick Unreliable?

Nov 1, 2010

I can't copy MP3 files to any USB memory stick with nautilus anymore. The MP3 files 'stutter' or jumps to the next song in any music player or the copied folders are just empty. The copies are more 'reliable' when I copy album after album instead of a bulk copy of lets say 10 albums. I tested several sticks and even formatted them.

View 3 Replies View Related

OpenSUSE Network :: Mobile Internet Connection - Program Doesn't Find The HUAWEI USB Stick

Aug 11, 2010

I have opensuse 11.1 Gnome on Lenovo S10e. I'm wanting to establish a mobile internet connection. I have tried so far...*UMTSMON but when I click on it nothing happens. I have reinstalled the program several times to no avail. *WINE to run the Optus program, however the program doesn't find the HUAWEI USB stick & *Via a Bluetooth connection (use mobile phone as a modem) didn't work either Anyhow, I have tried these and some other ways to get mobile to no avail.

Also, have gone to network connections-mobile broadband-add-configure it- but what am I forgetting to do? Need a path I can take to get mobile internet working. (I even have a direct SIM card slot in this laptop

View 5 Replies View Related

OpenSUSE :: Swiftfox Doesn't Show Up On 11.3 KDE Menu?

Aug 3, 2010

I've just installed 11.3 on my mother's laptop. I downloaded and installed Swiftfox, but there's no evidence of it in the menu. I can double-click the Swiftfox.desktop icon in /usr/share/applications, and Swiftfox runs properly. However, it's not listed in the KDE menu.Is there a way to manually update the menu?I didn't have this problem with the previous version of openSuse on this computer. But I did a fresh install, rather than update to 11.3.

View 3 Replies View Related

OpenSUSE :: Top Doesn't Show Anything Using Cpu To Any Great Extent

Feb 21, 2011

my cpu usage goes way up. Top doesn't show anything using the cpu to any great extent. I did a "ps -ax" and statred doing process kills. I kiilled a dbus pre-fork first, which brought, which stopped the cpu hogging. This is the process line:

/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session

Does anyone know what that does, or what I killed?

View 9 Replies View Related

OpenSUSE :: Gtranslator Doesn't Show The Words

Jun 29, 2011

I use gtranslator to translate po files. Gtranslator worked fine on 11.3 but when I installed 11.4 it crashed. I opened a Bug report here. Although I followed instructions, I couldn't solve it. Now I use Gnome 3. I installed gtranslator from the page where it says about Gnome 3. Now my gtranslator is 2.90. Now when I open a file, it returns the following image The numbers you see below are the words. I don't see a thing. I can move to next word but I still cannot see anything.

View 1 Replies View Related

OpenSUSE :: 11.3 KDE 4.4 Xmms2 - Doesn't Show Up In The Launch Menu

Oct 11, 2010

I installed xmms2 from the packman repo. I doesn't show up in the launch menu. If I try and start it from the CLI I get the following

[Code]...

View 4 Replies View Related

OpenSUSE :: KDE Calendar Doesn't Show Birthdays From Kontacts?

Mar 9, 2011

when I add a birthday to a contact in Konact,I expect it would show up in the PIM calendar. The birthday calendar has a check box in it.Suggestions on how to troubleshoot/fix

View 3 Replies View Related

OpenSUSE Wireless :: LAN Doesn't Show Up In Hardware List

Dec 17, 2010

I've read the sticky post about getting my wireless to work. Here's what I know:

Wireless LAN doesn't show up in my hardware list. But the wireless usb adapter I have (D-Link DWA-160) does show up under USB devices, with the following UDI info:

UDI:/org/freedesktop/Hal/devices/usb_devices_7d1_3a09_12345_if0

When I look at the boot.msg log I see nothing about a firmware failing to load. Does that mean I already have it?

When I try the /usr/sbin/iwconfig command I get:
lo no wireless extensions
eth0 no wireless extensions
When I try the /usr/sbin/iwlist scan command I get:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.

There's a page (ar9170 - Linux Wireless) where I can supposedly download the ar9170.fw firmware that supports this device. But when I try to download it it doesn't show up in the /lib/firmware directory and I don't know why.

The system sees the USB adapter, but it doesn't appear to be working. Do I need the firmware? And if so, how do I download it-

View 9 Replies View Related

OpenSUSE Network :: Firefox Doesn't Show Any Page Since Update

Mar 25, 2010

I updated Firefox today via Yast, since this time it doesn't show any page.I choosed in Configuration no proxy.The sites are empty, nothing just white.I also tried a downgrade to the previous version, didn't help.The Firewall I deactivated for test in Yast, too.A new profile didn't help, starting as administrator either not.

View 4 Replies View Related

OpenSUSE :: Installed - Openoffice Doesn't Show Up Under Main/applications/office

Feb 13, 2011

I installed openoffice. installation seemed to go well, but openoffice doesn't show up under main/applications/office. in fact - it doesn't show anywhere.

I did find it using "find files/folders" ...in the folder:

There's a file called soffice of Type: Shell script that runs openoffice. How do I add this to my menu?

View 5 Replies View Related

OpenSUSE Hardware :: Cups Loses Jobs - Doesn't Show Up At The Server

Feb 7, 2011

I have a 11.3 machine as a print server sharing out a printer Then I have two clients using that printer. One 11.3 and one 11.4 6 of 6. When I print from LibreOffice on either machines every other print job disappears. I'm a bit puzzled ! It's not random it's exactly every other that doesn't show up at the server. It's not in the server job log.

View 5 Replies View Related

Ubuntu :: Maverick Doesn't Show Sub-menus / Show That?

Oct 14, 2010

Anyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!

for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!

View 9 Replies View Related

Ubuntu :: USB Copying Starts Slow And Gets Slower?

Feb 3, 2010

I know there were threads on USB problems already, but there does not yet appear to be a definitive solution to USB speed problems on Karmic.flash drives are very slow to copy to. running lsusb in terminal, it appears to be running at USB 1.1 speeds, but even that doesn't seem to be the whole picture. When I copy an 800mb file to the drive the first 150mb transfer in a matter of seconds, then the mb/s seems to get slower and slower, starting at about 12 and ending at about 5. If I copy multiple files to the USB at the same time the problem seems to get even worse, taking about 10 minutes to copy 1600 m/b - less than 1 mb/second.

View 6 Replies View Related

Ubuntu :: 9.04 Copying From Ntfs To Ext3 Slow/not Possible?

Jun 12, 2010

I am trying to copy the contents of an external NTFS hard drive to my internal ext3 drive. Ubuntu 9.04. The transfer starts, then slows, then grinds to a complete halt, and has to be ended, causing icons on my desktop to disappear. Then the hard drive needs to be unplugged, then re-plugged to register in ubuntu again. Sometimes this happens first time, other times it will not register after many plug in - out cycles. Small files will copy across successfully while still in the "slowing down" phase, so I don't think it is a permissions problem. On the occasions the ntfs HD will not register in ubuntu, it makes a clicking noise when started, then spins down to silence. Could this indicate a hardware error, or is this ubuntu giving up after failed attempts to recognise it?

When trying to run files directly from the NTFS hard drive (when working correctly), it runs fine with no problems.I currently have this device plugged in via sata - usb adapter, but the same problem happened when this drive was an internal. I had planned to move all the files from the ntfs drive to my ext3, then format the ntfs drive to ext3 and copy the files back, but it looks like it's not meant to happen. Next time I can actually get ubuntu to pick it up and mount it I will try the enabling of DMA (as seen in another post), and trying to copy with rsync instead of nautilus (as seen in another post). Is there anything else it could be

View 1 Replies View Related

OpenSUSE :: Nautilus Address Bar Doesn't Show Filesystem Path / Text Location Bar

Aug 22, 2010

I have openSUSE 11.3 Gnome installed. The nautilus address bar shows the "Button Bar" and if I press Ctrl+L it swaps to the "Text Location Bar". The Text Location bar is where you see the full path to the directory that you're viewing.But I can't set the default addressing to the Text Location Bar.What else should I do to get the text location bar (i.e. the full path) to be the default view in the address bar?

View 4 Replies View Related

OpenSUSE Hardware :: Linksys WUSB600N And 11.2 - Ifconfig Doesn't Show A New Network Interface

Jan 24, 2010

I have a laptop running 11.2 with an internal Broadcom-based Wi-Fi card that's working fine. I'm trying to get 802.11n going with the WUSB600N. The USB ID on this device is 1737:0079. I believe this means it's a "V2" with an RT3572 chip.

No driver loads for this device when it's plugged in. If I do a "modprobe rt2870sta", a driver loads, and syslog shows "rtusb init" and "usbcore: registered new interface driver rt2870". But ifconfig -a doesn't show a new network interface. I've also tried building the RT3572 driver from the manufacturer's web site. It builds fine, and modprobe will load it, but I get the same results as the rt2870sta driver.

View 1 Replies View Related

OpenSUSE Hardware :: Cell Phone Mass Storage Device Doesn't Show Up?

Feb 14, 2010

It doesn't show it on the device-notifier, or fdisk, and not sure if this will be any use to you. In windows it appears immediately as a MSD, doesn't show as a modem or anything first.

Code:
linux-gg0e:/home/Chris # tail -f /var/log/messages
Feb 14 10:20:09 linux-gg0e smartd[2752]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 51 to 50
Feb 14 10:20:09 linux-gg0e smartd[2752]: Device: /dev/sda [SAT], SMART Usage Attribute: 195

[Code]....

View 1 Replies View Related

OpenSUSE Install :: Boot Screen Doesn't Show And Installation Media Won't Load

Jun 7, 2010

I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.

Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.

View 7 Replies View Related

Debian :: Copying Files Very Slow - Freezing After Each File

May 28, 2011

Yesterday pendrives started to misbehave when files are being copied/moved into them: after each major file (like a few hundred megabyte movie) the copying process freezes, stops and doesn't seem to proceed. After a long while (a few minutes), it unfreezes and proceeeds, only to get stuck again on another large file. Thus copying 5 movie files takes half an hour instead of just a few minutes.

The freeze occurs regardless of copying method used: mc (F5), Dolphin, command line cp or mv. During the freeze the process refuses to react to any signals, for example 'killall cp' or 'killall mc' doesn't kill the process, only 'killall -9 mc/cp' works, and also only after a short delay.

This misbehaviour continues across reboots.

What may be the cause of this? Where should I look for the source of the problem or for solution?

This has never occurred before - since I'm on llinux, copying to external devices has always been going smooth and fast. On current Debian this used to be like that as well since install untill yesterday. I don't recall doing anything special to the system yesterday or right before yesterday (I switched from Ubuntu to Debian (squeeze, AMD 64) a week ago).

View 11 Replies View Related

Ubuntu :: 9.04 - Very Slow Copying Speed To Any Device / Drive

Jul 8, 2010

I have installed ubuntu 9.04 version. But now its too slow to copy files to any devices or even to other drives.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved