OpenSUSE Hardware :: Logitech Quickcam Pro 5000, 176x144 Resolution Only?

Apr 21, 2010

In vlc, cheese I'm getting only this resolution.

[ 464.100250] uvcvideo: Adding mapping Brightness to control 00000000-0000-0000-0000-000000000101/2.
[ 464.100262] uvcvideo: Adding mapping Contrast to control 00000000-0000-0000-0000-000000000101/3.
[ 464.100270] uvcvideo: Adding mapping Hue to control 00000000-0000-0000-0000-000000000101/6.
[ 464.100279] uvcvideo: Adding mapping Saturation to control 00000000-0000-0000-0000-000000000101/7.
[ 464.100287] uvcvideo: Adding mapping Sharpness to control 00000000-0000-0000-0000-000000000101/8.
[ 464.100295] uvcvideo: Adding mapping Gamma to control 00000000-0000-0000-0000-000000000101/9.
[ 464.100304] uvcvideo: Adding mapping Backlight Compensation to control

[Code]...

Somewhy it is using YUY, but not MJPEG, although seems MJPEG can give larger resolution. How to get it? Single shot 1,3MPix technically possible, any way to do that?

View 2 Replies


ADVERTISEMENT

OpenSUSE Hardware :: Logitech Quickcam Not Working?

Aug 15, 2010

Code:
lsusb
046d:08af Logitech, Inc. QuickCam Easy/Cool

Apparently, this webcam uses the gspca2 driver. The gspca modules are loaded but if I try using a program like cheese it tells me no device was detected.

Code:
hwinfo --usb
17: USB 00.0: 11200 TV Card
[Created at usb.122]
Unique ID: YccR.9AtOl3Z230E

[Code]....

If I do a modprobe -rf gspca_zc3xx and then modprobe gspca_zc3xx I see the light blink a couple times, but it still doesn't work in cheese.

View 4 Replies View Related

OpenSUSE Multimedia :: Installing Logitech Quickcam Messenger ?

Dec 25, 2010

I'd like to install a Logitech webcam with built-in microphone in order to use it in Skype.

It seems to been recognized :

And softs links seems to be created :

Code:

I can't understand the last line... I also got trouble with Adobe Flsah Square flash 64 bits and it may be related to it.

I do not know where looking for. Here are the output of Webkam and Wxcam.

View 4 Replies View Related

OpenSUSE Hardware :: Gettich Logitech QuickCam Communicate STX To Work?

Mar 6, 2009

I've got a Logitech QuickCam Communicate STX webcam. According to this website, this webcam works under Linux; however, when I open Cheese, I get only a screen full of colored bars (like what you see on a television channel that's off-air), and in Skype I get green snow.

View 5 Replies View Related

OpenSUSE Multimedia :: Recording Audio With Logitech QuickCam Pro For Notebooks?

Jun 20, 2011

Inspired by some recent posts from oldcpu I decided to grab some audio from my Logitech webcam, just for the fun of it. openSUSE 11.3 i586 is in use.

Code:
> lsusb
Bus 002 Device 003: ID 046d:0991 Logitech, Inc. QuickCam Pro for Notebooks
> arecord -l
**** Liste der Hardware-Geräte (CAPTURE) ****
Karte 0: Intel [HDA Intel], Gerät 0: ALC892 Analog [ALC892 Analog]

[Code]...

It works! Though I have to say that the audio quality is mediocre (to say the best). I blame it on the quality of the built-in microphone of this camera. It sounds like it was recorded in a giant bathroom.

View 1 Replies View Related

Ubuntu Multimedia :: Logitech Webcam Pro 5000 Does Not Work With 9.04?

Mar 10, 2011

logitech webcam pro5000 which does not work with my computer, the webcam does not work even if i plug it to different ports,especially when am using "skype linux beta",i tried searching for forums and threads and even videos but it seems my weak mind cannot absorb the technical explanations on the said sites,

View 1 Replies View Related

Fedora :: Install A Logitech Quickcam Pro500?

Apr 8, 2009

how to install a logitech quickcam pro500

View 4 Replies View Related

Ubuntu :: Logitech QuickCam Pro 9000 Webcam?

Aug 3, 2010

I have two computers--a Zareason machine (no details yet) running 8.04. I also have a Dell 1525N laptop running 9.10. I purchased recently a Logitech QuickCam Pro 9000 Webcam. The video works on both systems with Ekiga and Cheese. I can also see the video in Flash applications (but *not* in Meebo even with the other person logged into Meebo). (Both computers are running the latest Flash plugins).

However, the built-in microphone is problematic. With 8.04, I get playback when I test it under System|Preferences|Sound--but with lots of echo. But I get no sound with any Flash chat applications. I've not been able to test it with Ekiga as the testee (a Windows 7 user) can't get Ekiga to work on his machine (probable Windows firewall issues). I haven't installed Skype because Skype pulled its 8.04-compliant .deb packages and I've not tried yet to compile it from source code.

With 9.10, the webcam works with Cheese (video) and I can get both webcam and mic to work with Skype. (Again, no test result possible for Ekiga until I get a testee). However--my Win7 testee friend says that when I log into Googlechat using Pidgin on my 9.10 laptop, a webcam icon appears next to my userID telling him that I have an open webcam (even when there's NONE actually plugged in). He doesn't see the same icon when I log into my 8.04 desktop with no webcam plugged in. I have searched Pidgin and my System preferences and see no evidence that any of these applications or my system sees a webcam that's not there.

So--how to get the mic to work? (I am thinking the simplest answer will be to simply upgrade my desktop to Lucid). And also, why the webcam icon in Googlechat even when no webcam is plugged in on my 9.10 laptop??

View 4 Replies View Related

Ubuntu Multimedia :: Streaming From Logitech Quickcam?

Jun 9, 2011

What I'm trying to do is set up my quickcam to stream video to a web page for zone minder to pick up. If that makes any sense.

Here is the error that I'm getting:

Code:
libavutil 50.15. 1 / 50.15. 1
libavcodec 52.72. 2 / 52.72. 2
libavformat 52.64. 2 / 52.64. 2

[Code]....

View 2 Replies View Related

Hardware :: No Image For USB Logitech Quickcam In UCView?

Jan 18, 2010

I have a USB Logitech Quickcam (not sure what model) and I'm trying to simply get some live video running in UCView. I've compiled a bunch of device drivers into my kernel, including Video4Linux, Quickcam BW and Quickcam Colour (some logical choices). However, I am unable to get anything from my Quickcam. Regardless of whether the camera is plugged in, I can run UCView and get a video of scrolling colors, like the attached picture.

This is coming from /dev/video0. I just don't know how I can somehow hook up my quickcam to a video device.

View 1 Replies View Related

Debian Configuration :: Skype - Logitech QuickCam Communicate STX ?

Apr 19, 2011

I am trying to get Skype working, the only problem is the webcam, in the test video all I get is a black screen.

After some research I found this command to get Skype to work with my webcam, as you can see there are a few errors.

Below is a listing of of /usr/lib/libv4l/ directory

Other than the video, eveything seems to be working.

This is on Skype 2.2, Skype 2.1 was the same. webcam works fine.

View 2 Replies View Related

Debian Hardware :: Logitech QuickCam Pro 9000 - Still No Sound?

May 20, 2010

If this sounds like a repost, that's because it is. I'm reposting because the problem is still here, nothing has changed. It's been well over a year now since I bought this damn webcam (thinking it would work because I got indications that it was known to be Linux compatible) and I'm still no closer to any sort of solution.

I can start Cheese, press record, and get a perfectly functional video. But despite my webcam having a microphone and despite ALSA detecting it (refer to old topic) I get no sound. Just complete silence. I can't even confirm whether this is a hardware or software problem because I don't know any way to test it because no one even seems to want to look at the problem! I actually want to make some videos now, but I can't because of this problem. Edit: I just tried this with our second, less powerful PC running Ubuntu Karmic. It worked. I got sound out of the webcam. That's confirmation to me that this is a problem with Debian and not with the webcam. So why does it produce sound on another PC using Ubuntu Karmic and GNOME, but not on this PC using Debian testing/unstable with KDE?

View 2 Replies View Related

General :: Drivers For Logitech Quickcam Pro 3000 Webcam ?

Dec 23, 2010

I am looking for drivers for my Logitech quickcam pro 3000 webcam. I can not get my webcam to work in linux.

View 4 Replies View Related

Ubuntu :: Make The Logitech Quickcam Messenger Webcam?

May 11, 2011

I've browsed the forums on how to make the Logitech Quickcam Messenger webcam work. The problem I am running into is that the one and only website that seems to have the patch is[URL]...This website seems to be defunct. So does anyone have this patchfile or know where I can find it? Or some other option or work around?

View 3 Replies View Related

General :: Logitech QuickCam Sphere Has Blue Tint After 10.04 Upgrade?

Jun 26, 2010

After upgrading Ubuntu to 10.04, my Logitech, Inc. QuickCam Orbit/Sphere AF now has a blue tint in both Skype and guvcview (So probably everything).

Anyone run into this problem? I am going to run my updates to see if this helps for the time being.

View 1 Replies View Related

Ubuntu Multimedia :: Using Logitech Quickcam Easy/Cool With Skype?

Apr 13, 2011

an't get my webcam to work. with anything, letalone skype. lsusb feedback Bus 002 Device 002: ID 046d:08af Logitech, Inc. QuickCam Easy/Cool

[Code]...

View 1 Replies View Related

Ubuntu Multimedia :: Logitech Quickcam Zoom On Natty Narwhal

May 28, 2011

my logitech quickcam zoom works out of the box for taking local pics and local videoshots. It's seen by Cheese, camorama, However, it doesn't work on aMSN, nor on any video-enabled website. lsusb tells me: Bus 004 Device 003: ID 046d:08b4 Logitech, Inc. QuickCam Zoom

Is there someone around who has got their logitech quickcam zoom to work and is willing to share his/her knowledge?

View 4 Replies View Related

Hardware :: Logitech Quickcam Does Not Work With Newer Linux Kernels?

Oct 26, 2010

I have a rather old webcam, a Logitech quickcam messenger. This webcam was working fine with older linux kernel version, I think < 2.6.27. The gspca driver that makes this peripheral working has been merged into kernel sources, and I think that my webcam stopped working with this merge. I am a Slackware user, and until version 12.2 my webcam was working (I manually compiled and installed drivers). If I well remember, with version 13.0 (kernel 2.6.29) the video was full of strange artifacts, and with Slackware 13.1 (kernel 2.6.33) the webcam does not work at all. I am performing these tests with skype, that had videocalls fully working before gspca was merged into the kernel tree, while now I can only make phone calls.

This are the informations given by dmesg:

Code:
usb 3-3: new full speed USB device using ohci_hcd and address 6
usb 3-3: New USB device found, idVendor=046d, idProduct=08da
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
gspca: probing 046d:08da

[Code].....

View 4 Replies View Related

Hardware :: Logitech Webcam (quickcam Express Plus) Won't Work With Ubuntu 8.04?

May 17, 2009

I'm having a confusing time with this webcam. When I plug it in, dmesg shows it is recognised and needs the module gspca_spca561

Code:

[ 6644.595789] usb 1-6: new full speed USB device using ohci_hcd and address 4
[ 6644.707379] usb 1-6: configuration #1 chosen from 1 choice
[ 6644.752736] Linux video capture interface: v2.00

[code]....

However, there is no result in skype, ekiga, or awetv, although the device /dev/video0 is created. there was a kernel update from Ubuntu 2.6.24-23-generic to 2.6.24-24-generic, and the webcam magically started working, using a different module, gspca. However, after some celebration, I found that my usb tv dongle, which uses the dvb_usb_af9015 module, ceased working.

I corrected this by recompiling the dvb_usb_af9015 module, using source from http://linuxtv.org/hg/~anttip/af9015/ ----after another celebration, I found that the webcam had stopped working again, and I have not been able to make it work since, despite recompiling the gspca module from http://mxhaard.free.fr/download.html. Attempting to insert the gspca module produced from this gives:

Code:

insmod: error inserting 'gspca.ko': -1 Unknown symbol in module Another thing I've noted, is that the gspca module will work when I boot into earlier kernels (eg 2.6.24-21-generic).

View 1 Replies View Related

Ubuntu Multimedia :: Logitech QuickCam Vision Pro For Mac Doesn't Work In Skype?

May 18, 2010

I am running Xubuntu Lucid 10.04 on a Sony Vaio. I recently dropped $100 on a Logitech QuickCam Vision Pro for Mac, on the recommendation on the ubuntu wiki [URL].. that it would "work perfectly" in Skype. In Skype, it did nothing. No Audio, no video, light wouldn't even come on. Essentially a $100 dollar paperweight. I really think someone should correct this misleading information on the wiki.

I followed the kludge listed here [URL].. to get the video to work. By executing Skype with the shell script listed in the first post, I could get the video test to work, but no audio, and when I tried to call someone, when I turned on video, Skype quit suddenly. For the record, yes, I unmuted the device in the Sound Mixer in the top right corner.

Later on, I tested it with guvcview, and the cam worked perfectly in that program. It's only Skype that doesn't know what to do with it. When I execute Skype in Terminal I get the following output repeating over and over again:

Code:
X Error, request 20, minor 0, error code 3 BadWindow (invalid Window parameter)
X Error, request 15, minor 0, error code 3 BadWindow (invalid Window parameter)
libv4l2: error setting pixformat: Input/output error
libv4l2: error setting pixformat: Input/output error

[Code]...

View 9 Replies View Related

Ubuntu Multimedia :: Logitech Quickcam Pro 9000 Does Does Not Work With Adobe Flash In 10.04?

Aug 9, 2010

I have a Logitech QuickCam Pro 9000 which works with Skype, Cheese, Ekiga, and Flash on Ubuntu 9.10 with no problems. (With Ubuntu 8.04, the video worked with all of these but Skype (couldn't test Skype as it was not available) but not the audio, which was one of the reasons I upgraded). It does not work with Flash in Ubuntu 10.04. Flash does not detect the camera though it does detect the microphone (and says it works, haven't tested it yet). It works (video and audio) with Skype and Ekiga. The video works with cheese and I can record my own voice with Sound Recorder off the webcam's mic.

I have looked at the webcam community documentation [URL]..and have visited Adobe's site [URL].. to click on "always allow". But that does not work either. Flash simply does not see the camera. The version of flash on both computers is the same (10,1,53,64).

View 4 Replies View Related

Ubuntu Multimedia :: Logitech Quickcam Express (046d:0850) On 10.04 Lucid Lynx

Jun 26, 2010

I'm attempting to make my Logitech Quickcam Express work with Ubuntu 10.04.I what may be the problem but it doesn't seem to work with any of the applications so far. I visited [URL] and attempted to extract and compile the drivers but ran into problems.

Code:

incarnation@incarnation-desktop:~/Desktop/qc-usb-0.6.6$ make all
make -C "/lib/modules/2.6.32-22-generic/build" SUBDIRS="/home/incarnation/Desktop/qc-usb-0.6.6" modules V=1 USER_OPT="-DHAVE_UTSRELEASE_H=1"

[code]....

View 5 Replies View Related

Hardware :: Configure 1600x800 Screen Resolution With Radeon 5000 Series (hd 5730)

Feb 17, 2010

I have a new system with an ati mobility radeon hd 5730 chip. As far as I know, there are new drivers in the works, but aside from some articles, I haven't found anything that specifically tells me how to get them installed/working (at least, so that it works for the 5000 series of radeon chips).Has anyone had any luck with this yet? I'm just at the stage of installing, so I don't really care if it involves a different distro, etc. I've tried Ubuntu 9.10 and 10.04-alpha2, as well as Fedora 12 (from the live CD) and so far no luck.At the moment, all I care about is getting the native 1600x800 working for my screen. I haven't a clue how do do that...it seems like I might be able to do this using xrandr, but I don't know how to create a mode properly.

View 6 Replies View Related

Debian Hardware :: Iwlwifi-5000-3.ucode And Iwlwifi-5000-4.ucode?

Aug 17, 2011

during advance graphical debian squeeze installation, it displays the following message Detect network hardware Some of your hardware needs non-free firmware files to operate. The firmware can be loaded from removable media, such as a USB stick or floppy.

The missing firmware are: iwlwifi-5000-5.ucode iwlwifi-5000-4.ucode iwlwifi-5000-3.ucode iwlwifi-5000-2.ucode iwlwifi-5000-1.ucode If you have such media available now, insert it, and continue.

View 2 Replies View Related

OpenSUSE Hardware :: QuickCam S5500 Color And Video Messed

Sep 23, 2010

I just recently reinstalled OpenSUSE 11.3 and my camera (Logitech QuickCam S5500) is now messed up. Is there any way to reconfigure or redetect the camera? How about reinstalling the UVC camera?

View 1 Replies View Related

Ubuntu :: Logitech SetPoint - Allows More Functions For Logitech Keyboards And Mice

Apr 15, 2010

Does anyone know of a variant on the Logitech SetPoint software (it allows more functions for Logitech keyboards and mice) for Ubuntu? Would the Windows version work in Wine? I didn't think it would because the app uses Bluetooth, and I don't know if Wine can do that.

View 2 Replies View Related

OpenSUSE Hardware :: Quickcam E3500 - Colors Flicker Wildly In Separate Parts Of Image

Apr 15, 2010

I get a window that shows a broken image which shifts to the left in bits - top half, bottom quarter, etc. - and the colours flicker wildly in separate parts of the image. The shell from which it was launched gives this output: Any of the controls I try gives me errors, such as:

Set Auto Exposure on error
Set Auto Exposure on error
Set Auto Exposure on error
Set Auto Exposure on error

I closed this program and ran kopete, which showed me no image at all but gave this output on the shell: Calling appendChild() on a null node does nothing. Calling appendChild() on a null node does nothing. Calling appendChild() on a null node does nothing.

View 4 Replies View Related

OpenSUSE Hardware :: 11.1 Nvidia Quadro FX-5000 (190.53) - Fatal Server Error: Caught Signal 11. Server Aborting

Mar 3, 2010

I am having a strange problem with the Opensuse 11.2 Xorg server. Graphics hardware is Nvidia Quadro FX-5000, driver is ver 190.53. 90% of the time, I am getting a seg violation from the Xserver on trying to login via kdm:

[Code]...

...is the error that is present in the "kdm.log" file. So far, it doesn't seem to be user dependent (happens either as root or joe random user,) Again, so far, it only seems to happen with "driver nvidia" enabled in the config file, not with "driver nv" The failure occurs shortly after hitting return on the login screen. After it fails, it starts up a new Xserver, and presents a new login screen. Repeated attempts seem to *eventually* succeed, but 90% of the time, it fails I strongly suspect the Nvidia driver, but I have not been able to find anything documenting any similar problems.

View 1 Replies View Related

OpenSUSE Hardware :: Configuring Logitech LX6 In 11.2?

Dec 22, 2009

I'd like to get the scroll wheel's left and right tilting to work in firefox (go back and forward one page). A lot of the forums suggest ways to do this with xorg.conf, but I see that it's been removed in 11.2. The only mouse support in Yast is this "text console mouse model" thing- what is that?? At any rate, it doesn't have Logitech LX or MX series mice in its list.Any suggestions for getting this to work? Am I going to have to create an xorg.conf file, and what will break if I do? Any ideas what the direction is for Logitech mice in openSUSE? It sure would be great to have better support for mice in this distro

View 1 Replies View Related

OpenSUSE Hardware :: Logitech Orbit AF Webcam

Nov 27, 2009

I was having some issues with my old webcam and decided to just get a new one since my old cam was just that, old. Anyway, I went with a Logitech Orbit AF and it works as far as video goes but I can not figure out how to change the pan/tilt. I did not expect all the options of the cam to work but I figured I would at least be able to move the cam up since it is aiming at its lowest setting, which when using is around my chest. I have been searching around trying to find something that tells me what I need to do. From what I read, I think I need to change the settings of some functions called v4L2UpDownPan() and v4L2UpDownTilt() in luvcview, which I guess are in a file called v4l2uvc.c but I can not find that file. Is this what I need to do? Is that the file I need to change and if so, where is it? I just want to set it and leave it.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved