OpenSUSE Hardware :: Epson CX7800 Printer Scanner Not Detected?

Aug 2, 2010

I have an epson cx7800 printer/scanner that 11,3 doesn't detect on USB. I tried Yast-Hardware-printers and Yast-Hardware-printers and nothing is discovered/detected.

Are there repos for this stuff and is there a tutorial like the one for graphic card theory I could peruse?

View 3 Replies


ADVERTISEMENT

Hardware :: Scanner Not Recognized In Ubuntu Epson Stylus NX510 Printer/scanner?

Aug 15, 2010

I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.

View 7 Replies View Related

OpenSUSE Hardware :: Setting Up Epson Stylus SX420W Printer / Scanner

Mar 17, 2011

I am trying to set up my Epson Stylus SX420W printer (via USB) on a fresh install of 11.4. I have found a driver called 'epson-inkjet-printer-nx420-1.0.0-1lsb3.2.x86_64.rpm', which I guess is right for my Intel Core i5-system on the Avasys-site that Epson refers to for Linux drivers.

I have downloaded the driver and installed it via Right-Click -> Open With -> Install/Remove Software, which seemed to go well. When I open Yast -> Hardware -> Printer -> Add, my printer is found all right, but 'No matching driver found'. Iam quite new to Linux.

View 9 Replies View Related

Ubuntu :: Epson Scanner Not Detected - No Usbfs Module

Mar 7, 2010

Have an Epson Expression 1640 XL A3 scanner (usb & network interface card). Bus=0002 Device=004 its usb ID is 0x04b8 0x0109 I have never been able to connect the scanner using the network - if anybody can advise, I would be very grateful. Quite happy to use this if usb is going to be a problem The scanner has worked very well through the usb and wask working well with 9.04(32bit). I have bought a new machine and did a fresh install of 9.10 (64bit) and the scanner is not detected.

xsane detects my webcams (vl4:/dev/video*)but no scanner Have run sudo xsane-find-scanner - only the webcams are detected Have edited /etc/sane.d/epson2.conf - added scanner usb ID, and added the lines:- usb /dev/usb/scanner0 usb /dev/usbscanner0 as advised in one of the threads in this forum sudo scanimage -L gave this-

WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device `v4l:/dev/video1' is a Noname Creative Labs Webcam Pro Ex virtual device
device `v4l:/dev/video0' is a Noname Logitech QuickCam Pro 4000 virtual device

[code]....

Do I need to select M for these three modules?

the following had [M] -
USB Printer support
Microtek X6USB scanner support

It looks like the scanner module has not been loaded, and possibly the usbfs yet usb webcam and card readers are accessible. I have tried to keep outputs relevant & short. If I have omitted anything, you would like full results or any other information.

View 1 Replies View Related

Ubuntu :: Epson NX420 Printer With Working Scanner

Dec 5, 2010

I've been trying to get my Epson NX420 printer to scan for about three months now, and I finally got it working. Here's how:
1. Go to [URL] and search for your printer. Select distribution and version and answer a couple of other questions.
2. Download pipslite_1.5.0-2_i386.deb, (or the 64-bit version), and all the iscan*.deb files (again, appropriate to your system).
3. [CRITICAL] Go to [URL] and download this 8.04 package which worked just fine for me on 10.10.
4. Use the Software Center or GDebi or sudo dpkg -i the .debs in this order:

1) libtdl3, which is a dependency for Step 2.
2) pipslite
3) iscan-data
4) iscan-network
5) iscan
(If you use a USB connection, you don't need the iscan-network file.) This got my NX420 scanner up and running just fine. Installing libtdl3 was the key; in fact, I used the Debian Lenny package.

View 9 Replies View Related

Ubuntu :: Why Can't 9.10 Find My Epson TX110 Printer/scanner?

Apr 29, 2010

I can't use my printer/scanner - it is an Epson TX110. When I try to use Image scan - I get the message; "Could not send the command to scanner. Check the scanner's status."

There is nothing wrong with the MFC apart from not working on Ubuntu 9.10. I have had it connected to another computer that ran Ubuntu 9.01 (I think that was the release used) and it ran fine but now I'm stuck -

I have drivers installed but cant get them to co-operate with me.

View 2 Replies View Related

Ubuntu Networking :: Setting Up Epson SX515W Wireless Printer/Scanner?

Feb 7, 2010

I've used windows all of my life, and never really looked at Linux, so thought it would be a good time to see outside of the box! I installed Ubuntu 9.10 a couple of weeks ago after reading a few Linux Newbie books and deciding it would be the best distro for me. Being completely new with Linux it's proving difficult doing certain things which I would have done with a couple of clicks in Windows, however I've managed to get past some of the problems after hours of searching and messing about. I managed to set my wireless network up, and with a great struggle my wireless printer using cups- which now seems to be printing fine over the network, its IP is 192.168.0.105. However even after reading lots of info and tutorials on Forums & Blogs nothing seems to work regards to my scanner (which is an all-in-one printer SX515W).

The information is completely overwhelming. I've been told to use iscan with the network plugin which I downloaded from [URL] after installing and running image scan or xscan the printer would scan for a couple of seconds and then it would stop, and I'd have to reset my printer. I read the documents supplied, blogs, and forums telling me to do certain things such as:

Code:

sudo gedit /etc/sane.d/epkowa.conf
add "net 192.168.0.105 1865"
sudo gedit /etc/sane.d/dll.conf

[code]....

Like I said, being new to Linux I'm completely lost with what I'm doing or what I should be listing here! This is my last resort really, if I still can't get this thing working I may just give up because it's so stressfull!

View 7 Replies View Related

Hardware :: Using Iscan By Epson CX9300F - Could Not Send Command To Scanner - Check Scanner's Status

Mar 17, 2010

After downloading and installing iscan and run it i see this message:

Could not send command to scanner. Check scanner's status.

After command sane-find-scanner:

And this message is result of scanimage command:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

OpenSUSE Hardware :: Scanner Epson DX4450 Does Not Scan?

Jan 31, 2010

my all-in-one Epson scanner does not work. I tried to install the iscan drivers (free and/or proprietary) via repository and/or via Avasys website, but nothing happens: the scanner is not recognized. I use Gnome and openSUSE 11.2

View 3 Replies View Related

OpenSUSE Hardware :: Printer Is An EPSON WorkForce 610 C11CA50201?

Jan 24, 2010

I ordered a new printer yesterday... I am intending on using it with my Macs, but I am thinking I may want to print on it from my HP netbook running suse linux..The printer is an EPSON WorkForce 610 C11CA50201.

Does wifi printing work on linux? I haven't read anything saying it does, nor have I seen anything that says it doesn't.I also wanted to know if wifi scanning worked.

View 2 Replies View Related

OpenSUSE Hardware :: 11.2 Upgrade To 11.3 - Epson Printer Broken

Jul 23, 2010

I have an Epson Stylus Photo PX710W. It worked fine in opensuse 11.2, but I've now done a fresh install of opensuse 11.3 and I can't get the printer to work. I set it up as for 11.2, so I'm sure it should just work.

CUPS job page says:

stopped
"/opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper failed"
and CUPS error log says:
PID 1294 (/opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper) stopped with status 127!

While the scanner also isn't working, I think this is a separate issue as the CUPS log seems to suggest it is connecting to the printer, + I'm using network and usb connection.

View 2 Replies View Related

OpenSUSE Hardware :: Multi-function Epson Stylus Sx218 - Can Not Run The Scanner Function ?

Mar 24, 2011

I bought a multifunction stylus sx218 Espon model and I can not run the scanner function. I did some research and found a few solutions and very functional. I hope someone solves the problem. My version of openSUSE 11.2.

View 9 Replies View Related

OpenSUSE Hardware :: Epson Stylus NX110 - Printer Does Not Have Drivers

Jan 20, 2010

I'm new to openSUSE and have only used Ubuntu. I have a Epson Stylus NX110 all in one printer. All I really care about is the print capabilities, scanning is a secondary issue. Suse recognizes the printer but doesn't have a driver for it. On Ubuntu I had to use the NX105 drivers but they worked just fine.

View 3 Replies View Related

OpenSUSE Hardware :: Can't Install Pipslite-1.4.0-5 For An Epson Workforce 610 Printer?

Jul 25, 2010

I downloaded the .rpm file for pipslite-1.4.0-5 and tried to install it using YaST, but it needs "libgdk-1.2.so.0". I was given the error "nothing provides libgdk-1.2.so.0 needed by pipslite-1.4.0-5.i386. I am currently running 32-bit OpenSUSE 11.3. Can anybody help me with installing pipslite? I googled libgdk and I notice that it's in gtk+, but I don't know how to install that either.

View 7 Replies View Related

OpenSUSE Hardware :: Epson SX205 Printer - PPD Version Not Compatible

Sep 7, 2010

I'm trying to configure my SX205 printer. It is well recognized, and Gutenprint driver are available. But the printer doesn't work, here are the error messages :
The PPD version (6341210) is not compatible with Gutenprint 5.2.5.
I am on opensuse 11.3; so the gutenprint version is 5.2.4, i don't know why it talk about 5.2.5. I have tried cups-genppdupdate but it doesn't change anything.

View 5 Replies View Related

OpenSUSE Hardware :: Driver For Epson Printer USB DX6050 Required?

Nov 14, 2010

I tried to configure this printer and clicked on "add printer" but the drop down menu did not contain my printer. Does this mean that the printer driver does not exist?

When I tried to print out a test Open Office document it came up with "printer error" However Open Suse did recognise my printer as a DX6000.

[URL]

View 1 Replies View Related

OpenSUSE Hardware :: Epson Stylus NX420 Printer Driver?

Dec 29, 2010

I am searching for a printer driver for my Epson Stylus NX420 Printer/Scanner. Should I use a generic Epson driver from the extensive default list, or is there a better driver out there? re: I'm running OpenSuse 11.2 and KDE

View 1 Replies View Related

OpenSUSE Network :: Setup Epson Stylus Printer With CUPS?

Sep 21, 2010

I want to setup my Epson Stylus (515W)-A letter before the 5 but not sure what. Basically when I open CUPS I click on add on new printer, I enter add printer but then the page says access denied. Also this is a network printer.

View 2 Replies View Related

Hardware :: Epson Stylus NX510 Printer Not Recognized In OpenSuse 11.3?

Sep 4, 2010

I got my Epson stylus NX510 all-in-one printer (just the actual printer worked, couldn't get the scanner recognized) working in Ubuntu Lucid Lynx. I'm currently attempting a dual boot with OpenSuse 11.3, but when I go to download the driver for it like I did in Ubuntu (and it worked) I get the following error messages:

(I'm downloading epson-inkjet-printer-stylus-tx550w-series-1.0.0-1lsb3.2.i486.rpm)

[PK_TMP_DIR|dir:///var/tmp/TmpDir.nT6NON] Repository already exists.

failed to install file: [PK_TMP_DIR|dir:///var/tmp/TmpDir.nT6NON] Repository already exists.

I have no idea what that means. I would be very very grateful if someone could assist me in getting this stupid thing up and running.

View 5 Replies View Related

OpenSUSE Hardware :: Epson Workforce 610 / Printer Is Found On Network But Still Can't Print?

Nov 26, 2010

I've got 11.3 Gnome on my lenovo desktop and I'm trying to connect an Epson Workforce 610 via a wired network. I installed the driver from AVASYS and Linux Standard Base in accordance with instructions. The printer is found on the network but I still can't print.

View 9 Replies View Related

OpenSUSE Hardware :: 11.4 Refuses To Recognize Epson Stylus Color 600 Printer?

Mar 24, 2011

In 11.3 I used an Epson Stylus Color 600 which worked well enough.

Now I'm quite disappointed that this so called 'best version ever' (11.4) refuses to recognize this printer.

The modules parport, parport_pc, and lp are all loaded. My printer is on and connected, but OpenSuse claims that there is nothing.

View 9 Replies View Related

OpenSUSE Hardware :: Epson Stylus Sx218 - After Restarting The Printer Can Not Print

Aug 7, 2011

I have epson stylus sx 218. I installed drivers from avasys and tried to configure it in [url]. The first test page was good but after restarting the printer can not print.

View 6 Replies View Related

General :: Install A Printer On The Parallel Port? The Printer Is A Epson LX-2170?

May 14, 2010

My Operating system is Ubuntu 10-4 that I have just installed.

View 6 Replies View Related

Fedora :: 14 Can't 'see' Epson CX3200 Scanner

Dec 4, 2010

I recently installed Fedora 14. Unfortunately, the scanner on my Epson CX3200 is not detected by the system. When i open 'Simple Scan', it shows i have a Epson CC-570L, and i don't know what to do to change it, so that it 'sees' my scanner. how i can change the scanner in 'Simple Scanner' to my CX3200?

View 2 Replies View Related

Ubuntu :: Can't Get Epson Scanner To Work

Feb 11, 2010

I've recently installed Karmic Koala (64 bit version) on my pc via a live cd.I still can't get my epson scanner to work so my plan was to get VirtualBox and then run xp inside Karmic.My problem is that my pc doesn't have an internet connection.

View 3 Replies View Related

Ubuntu :: Epson GT-S50 Scanner And Drivers?

Mar 31, 2010

Looking over the sane project for the epson GT-S50 scanner I see it lists requires DFSG non-free esci-interpreter-gt-s80 Does anybody know if one is writing their own scripts with bash and scanimage if that requirement of DFSG is still required under ubuntu (Karmic or lucid)????

View 1 Replies View Related

Fedora :: Setup Epson V33 Scanner?

Mar 2, 2011

I have Just got Fedora up and working and trying to setup my Epson V33 Scanner, I have downloaded the Driver packages from Avasys (http://avasys.jp/eng/linux_driver/) But when I try to install the iscan rpm package it tells me that I need libltdl.so.3, after doing some googling I have managed to find this rpm for Mandriva but I am unsure if installing this on Fedora would cause any problems?[URL].. When I looked on the Avasys site this is available as an rpm (or to be exact libltdl.so.7!)

View 1 Replies View Related

General :: Epson Workforce 310 Scanner And Fax Drivers

Dec 6, 2010

I am running ubuntu 10.04. I have an Epson Wprkforce 310 4 in 1. Connection is USB. I can print. I have searched for proper drivers for scanner and fax. I have found nothing for fax. I have found and installed at one time or another the following scanner drivers:

iscan_2.21.0-6.ltdl7_i386.deb
iscan_2.26.1-3_i386.deb
iscan-data_1.6.0-0_all.deb
iscan_2.26.1-3.ltdl7_i386.deb

The 1st 3 installed but nothing happened. When I installed the 4th, I got a message telling me about the scan app I have installed(default with ubuntu install). Hope welled up inside. When I opened the scan app, it said it could not find a scanner. WF 310 was on hoping for a driver.

View 1 Replies View Related

Slackware :: Scanner Not Recognized On Epson Workforce 633 With 13.37 32-bit?

May 17, 2011

I had a similar problem on 13.1, but was solved by this forum by copying 80-sane.rules to /etc/udev/rules.d/ . With 13.37 the same trick doesn't work. Here is my scanimage output:

Code:

root@Shuttle:/home/tfrei# scanimage -L

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Here is my sane-find-scanner output:

Code:

root@Shuttle:/home/tfrei# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

[code]....

View 6 Replies View Related

Debian :: Sane - Share Epson Scanner Over Network

Apr 29, 2010

I have a debian server (squeezzy) amd 64, running with an epson BX-300f pluged to USB. And I want to share the scanner over my network. So let's do that, Intalled sane, sane utils, iscan, which I've downloaded from epson drivers and wich include epkowa drivers fro scanner to work..
after that I installed on my system (Ubuntu 9.10) xsane... on console I type:

root@bruno-laptop:/home/bruno# scanimage -L
*** glibc detected *** scanimage: free(): invalid pointer: 0x00be63d0 ***
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device 'v4l:/dev/video0' is a Noname HP Webcam virtual device
device 'net:192.168.0.254:gt68xx:libusb:001:035' is a unknown manufacturer unknown device -- use override to select flatbed scanner
device 'net:192.168.0.254:epkowa:usb:001:035' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner
device 'net:192.168.0.254:epkowa:usb:001:035' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner

I don't know why I find so much things, if i only have one scanner. Then I opened xsane and found the scanner over network. I chose the epson with epkowa drivers I try to scan something but it dont output nothing and sometimes it gives me "end of file reached". I can put whatever config files here if you want to, just ask. One time it worked fine.. but only half of an image...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved