OpenSUSE Hardware :: Detection - In Framebuffer 1440 X 900 Is Not Listed Which Is My Monitor Resolution

Apr 10, 2011

I am using 11.4 32 bit Gnome. It is working fine expect high CPU usage. Specially by X-ORG. I am running this on my old PC with core2duo, Intel motherboard DG31PR, Integrated Intel GMA 3100 Graphics(intel G31 Exprss chipset) , 3 GB RAM I went to Hardware information in YAST and found some discrepancies.

1. desktop board is listed as D945GTP instead of DG31PR
2. in framebuffer 1440 X 900 is not listed which is my monitor resolution
3. BIOS info has no vendor name

View 9 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Set 1440 X 900 Resolution On 19' Lcd Monitor?

Oct 27, 2010

i'm trying to set the resolution to 1440 x 900 on ubuntu manually since it's not being showed under the options. I've followed this tutorial [URL] The problem is that i don't have the output name to add on this command (as you can see below under the xrandr command.:

xrandr --addmode XXXXX 1440x900
xrandr
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm

[Code]....

View 1 Replies View Related

Ubuntu :: Cannot Get The Monitor Screen Resolution To Anything But 1920 X 1440 (4:3)

Nov 14, 2010

I cannot get the monitor screen resolution to anything but 1920 x 1440 (4:3).

View 1 Replies View Related

OpenSUSE Install :: 11.3 And Monitor Detection?

Jul 22, 2010

I opted to blow away my system (no did not save xorg.conf), and do a clean install of 11.3. Not a big deal to blow it away, nothing lost.

Dell Dimension C521, 3GB RAM, Athlon DualCore
OpenSuse 11.3 x64
Nvidia GeForce 6150LE (on mainboard)
Dell 2048FP 24" Monitor, connected via VGA

When doing the install, all appears to go well. I added the "nomodeset" option after the first boot to avoid the graphics issues. KDE comes up and is in 800x600 mode at 50hz. That is the best resolution it will show. All other options in the configure desktop applet are lower. This monitor was driven at 1900x1200 on the same config with 11.2.

[Code]...

In the nVidia-Settings applet (run as root), it shows the display as "CRT-0". 11.2 showed it as a Dell.

View 7 Replies View Related

OpenSUSE Hardware :: Disable Monitor Detection In 11.4?

Mar 11, 2011

I've just upgraded to 11.4 and found myself with the same problem that I posted in Available resolutions vary depending if monitor is on or off when starting the system I'm using this pc as a server, and I acces to it most of the time via VNC, so the monitor is turned off almost all the time. If the pc boots while monitor is on, i have a resolution of 1280, if it's off I get 1024.

In the previous post I fixed this using the option "CustomEDID" in my xorg.conf, but this time I have no xorg.conf file to put this option in, and even if I did, since I'm using the default drivers (Nouveau, i think) instead of Nvidia oficial ones, i have no clue about how to obtain edid.bin. how to fix this without installing the propietary drivers? (since i don't need ant fancy 3d effects, kde seems to work fine and performance is ok)

View 6 Replies View Related

Debian Configuration :: Framebuffer Uvesafb Display Mode/resolution?

Jan 10, 2011

I'm trying to get a framebuffer console with acceptable scrolling speed on Dell XPS M1530. It has GeForce 8600M GT card with maximum resolution supported by bios 1920x1200

# cat /sys/class/graphics/fb0/modes | sort
U:1024x768p-60
U:1280x1024p-59
U:1280x800p-60
U:1600x1200p-60
U:1920x1200p-60

[Code]...

View 9 Replies View Related

OpenSUSE :: KDE On High Resolution Monitor ?

Dec 5, 2010

I have a dell latitude with intel i7 nvidia NVS 3100M and screen 1920x1080 resolution, using KDE 4.4 stable suse, well with high resolution monitor I found some problem usng kde:

1- I can change the font dimension by system settings but if I bigger the font the dimension of Kmunu doesn't change so the result is big font in small container, ugly and difficult to use

2- I can change the font dimensions in KDM splashscreen but the window where username and password is shown doesn't change, result is big unreadeable font in a small case

3- I cannot change the tabs and theyr font dimensions in chromium and firefox, result very small tabs

4- Icons in system tray and Kmenu and other icons remains always small even if I bigger the panel

View 2 Replies View Related

Ubuntu :: Incorrect Monitor Detection / Make It Correct?

Feb 25, 2011

It's detecting a 73" Mitsubishi TV when I have a 60". I installed my graphics card driver and that didn't correct the error.

View 4 Replies View Related

OpenSUSE Hardware :: 11.4 - How To Get Correct Monitor Resolution

Jul 8, 2011

I tested OpenSuse 11.4 as a guest OS via virtualbox on a win7 32bit host. Output to my 16:9 screen was perfect with a plentiful choice of high resolutions. Now with Suse (32 bit) properly installed as the host the only resolutions are 1024X768 and below and I am stuck with 4:3 ratio. My PC is an Intel Atom D945GCLF2 which has integral graphics. The monitor is the VGA input of a Samsung TV.

View 9 Replies View Related

OpenSUSE Multimedia :: Not Getting Full Monitor Resolution

May 27, 2011

Got a system that I've been using for a long time now without any problems. Now suddenly it won't use a higher resolution than 1024x768.I never added any mods to the configuration and have not added any software other than recommended updates it quite a while.Any ideas what happened or how to fix it? I checked and the monitor/graphics card will still do upper resolutions with windoze so I'm guessing the hardware is alright.Using OpenSuse 11.3, 64bit, on a dual core athalon with a Sapphire ATI x1600 graphics card and a 22 inch flat screen that is supposed to go 1600 x 1050.

View 6 Replies View Related

Ubuntu :: NVidia Dual Monitor - Auto Detection - Without To Restart X?

Jun 22, 2010

I've just installed Ubuntu on my laptop. My laptop has an nVidia card so I'm forced to use the nVidia configuration tools. What I'd like to happen is for it to automatically start using my monitors if they're detected. OR, make a simple script that will enable the monitors without needing to restart X.

View 1 Replies View Related

OpenSUSE :: 11.3 Resolution And Font With Specific Monitor - Broken ?

Aug 4, 2010

I setup 11.3 on PC and Belinea monitor (troubleshoting monitor). Everything was fine but since I installed nvidia driver (via 1-click wizard) resolution and font-size has broken

So I plugg another one monitor - Samsung SyncMaster and reboot system. After boot-up resolution and either font size were OK. I was able to select correct resolutoion and font size wasn't so tiny like on Belina.

It's looks like OS 11.3 have problem with correct output on belinea monitor. Driver is installed correctly. I tried to genereate new xorg.conf .

View 3 Replies View Related

OpenSUSE Hardware :: Monitor - Resolution Of The Kde Desktop Is Always The 1024x768

Jun 15, 2010

The monitor is a dell 2009 w (16:10 with around 1680x1050 IIRC) I have a fujitsu desktop with the intel core i5 CPU. the crux is the i5 has an integrated GPU. hwinfo says 'clarkdale integrated graphics controller' and yast tells me the same too, knowing the monitor model as well (with correct resolution) So we have an intel GPU ... but the resolution of the kde desktop is always the 1024x768. sax2 do not accept any other resolutions - he knows only threee, one larger at 1280x1024. But even if i try to turn it on he falls back to 1024x768. this is independed from runlevel 3 or 5. the /etx/X11/xorg.conf knows the monitor and the two modes 1024 and 1680 - but everyhwere else it seems that it is unknown, using default vesa mode... the gfx tools seem to ignore the ability of the higher resolution.

View 4 Replies View Related

OpenSUSE Hardware :: Resolution 1920x1080 Don't Max In All Monitor Area?

May 21, 2011

I've instaled 11.4 and in personal configurations the resolution is set fine (1920x1080), but it's don't maximizes all monitor area. I'm using Radeon 5670 with a TV/Monitor HDMI connection 1080p.In Win7 running fine.

View 6 Replies View Related

OpenSUSE Install :: Default Resolution Too High For Monitor ?

Sep 13, 2011

I have a problem with my screen resolution in Linux. This happens with both openSUSE 11.4 and Fedora 15. The moment my PC restarts after I have installed the operating system it will boot up with a screen resolution higher than my monitor supports. My screen supports a maximum resolution of 1600 x 1200 @ 75Hz and Linux sets the default resolution way too high at boot, now all I get is a message from my screen asking me very nicely to change the signal timings, but I can't because I can't see anything to change it to a lower value (I don't want it so high anyways because then everything is too **** small). My monitor is a SONY GDM-5410 and the Graphics card is an AMD Radeon HD 4870 1GB. It nly works when I boot the system to FailSafe mode, but then I can't cahnge it permanently.

View 1 Replies View Related

OpenSUSE Multimedia :: Monitor Not Recognized - Wrong Resolution

Jun 15, 2010

I have problem with resolution (@gnom desktop). In Yast --> videocard & monitor is all right. There is correct resolution 1366x768 (WXGA). Also the videocard ( I don't have really one, only chipset "Intel Mobile GM45" ) is correct recognized. But Monitor isn't recognized, and I don't know which one I have (It's notebook from acer).

Nevertheless if I go direct in monitor preferences (at the bottom the monitor with a ruler symbol) the resolution is set to 800x600 and I can only change to 640x480. The monitor is as 15" recognized (I have 15.4", even a bit more broadly - 1366x768) and now I don't know what to do. All symbols, all programs, everything is huge! How is it possible to configure the correct one resolution?

View 6 Replies View Related

Software :: Resolution Not Listed On Nvidia-settings?

Jun 9, 2010

i'm having a problem with nvidia-settings is that my resolution is not listed in. the only resolutions available are 640x480 and 320x240, the "detect display" doesn't work either.by the way i'm using the driver from nvidia site.other point is that i couldn't change resolution on kde before i installed the nvidia driver, it just showed the same two resolutions, i thought it was because i hadn't install the nvidia drivers but i got the same problem.

View 4 Replies View Related

OpenSUSE Hardware :: Native LED Monitor Resolution On Intel Arrandale?

May 17, 2010

I can't set up the native resolution for the LED monitor of a Dell Inspiron 1564 laptop with openSUSE 11.2.YaST2 lists correct the graphics adapter as: "Intel Arrandale Integrated Graphics Controller" and the monitor having the resolution: 1366x768 However in /etc/X11/xorg.conf lists only modes with a 1024x768 resolution, which are not really "sharp" on the monitor Besides that it lists the Device as "Vesa-BIOS Graphics". Starting sax2 does not provide me with any option to change these settings (at least not in the graphics mode).

View 3 Replies View Related

OpenSUSE Install :: Monitor Cannot Handle Video Card Resolution?

Feb 4, 2011

openSUSE 11.2 (i586)
VERSION = 11.2
on an IBM x3250

Problem is that after the screen comes up to chose the default version or failsafe, my monitor shows no input. If I delete the VGA 0x031 (i think that's the number) on the Options line in the screen where you chose the version, I get my command line interface.

Can I make the blank VGA options permanent?

View 5 Replies View Related

General :: Use A Framebuffer And Using "vga=791" (1024x768) In Grub The Monitor Turns Itself Off?

Sep 11, 2010

When booting up the linux distro everything boots up fine. However the linux terminal shows "-Bash:" and doesn't show the current directory. This may be fine for some people but I need to know what directory I am working in and having it displayed would make things a LOT easier.

Sadly though I can't find any useful information about doing this.I found something like "PS1=w" but that doesn't do anything at all. Oh yeah and I don't have a .bashrc nor a /etc/bashrc for some reason. Also when trying to use a framebuffer and using "vga=791" (1024x768) in grub the monitor turns itself off. This applies if I set vga to anything. I believe I compiled framebuffer support in the kernel but I am not 100% sure so if you believe that is the problem then I will double check. That would require redownloading the source again and networking hasn't been set up yet so.

Also what packages does "iwconfig", "ifconfig", and "dhcpcd" come in? Those are the tools I commonly used to connect to my wireless internet but they are not present in the linux distro.

View 2 Replies View Related

OpenSUSE Hardware :: Xrandr Doesn't Detect External Monitor Native Resolution

Apr 25, 2011

When I'm connecting second monitor to the laptop, Display Settings applet (and xrandr -q) does not detect full list of supported resolutions. I need to restart my system or perform Log off while monitor is connected to make full list available.openSUSE 11.4 32 bit, Ati Mobility Radeon HD 3450, proprietary ATI driver 11.3 8.831.2-110308a-115935C-ATI.External monitor is FullHD SyncMaster B2330 (1920x1080)I wonder is there any other workaround to access full resolution that does not require restarting of the system?

View 7 Replies View Related

OpenSUSE Install :: Changing The Framebuffer/CLI Ressolution?

Apr 14, 2011

I use the CLI a lot (the C+S+F1-F6 terminals), but i have a really tiny resolution on the framebuffer. How do i increase the framebuffer/CLI resolution in suse (that is opensuse 11.4)??

View 2 Replies View Related

OpenSUSE Wireless :: Wireless Will Not Connect Dell Inspiron 1440

Feb 18, 2011

I have loaded the latest version of opensuse and I have everything working but I cannot connect to my wireless WPA2 network. I have downloaded the bcm43xx firmware using the method /usr/sbin/install_bcm43xx_firmware I then restarted the network. The computer will now read the network card and will find networks but I cannot get it to connect at all. At first it would connect using ifup in yast but would disconnect after a few seconds. It would never connect through NM. I have a usb network card that works just fine. I am lost as to how to fix this problem.

View 6 Replies View Related

OpenSUSE Install :: SuSE-Kernel Ignores Framebuffer Disable Via Vga=0?

May 6, 2011

Kernel parameter vga=0 or vga=normal does not work as expected - First it works as expected text mode resolution is 80x25, but after some seconds the kernel, or the initramdisk does switch resolution of console again! I hate to say but it looks like OpenSuSe (again) thinks it is more clever than the user.Since rmmod radeon in runlevel 3 says "ERROR: Module radeon is in use", I do think that somehow SuSe ignores my vga=0 ... Is it the kernel or the ramdisk, I do not know where to search, since the parameter vga=0 is accepted and used in the beginning - it switch again after "doing fast boot" or 1-2 lines later..

View 2 Replies View Related

OpenSUSE Install :: Higher Framebuffer Resolutions Not Available During Bootup/console - Nvidia Properietary Driver?

Jun 26, 2011

I'm using the 270.41.19 nvidia properietary driver for my Geforce GTX460 graphics card. I have a Sony TV connected to my HDMI and I know it supports the 1920x1080 resolution. Yes it works after gnome or other DE loads up.

But during the GRUB screen and the bootup console - It defaulted to a 640x480 resolution (as it always does with the nvidia prop driver). I usually used to check the output of hwinfo --framebuffer and choose the resolution by appending the right vga=0xabc parameter.

But now I have a problem since hwinfo says the best widescreen 16:10 framebuffer resolution that my card supports is 1280x800. Here is the output from hwinfo --vbe which should give the info about both my gfx card and my TV.

The initial nouveau driver was able to output native 1920x1080 during the bootup on the console without issues, so I guess even the properietary driver should be able to output (If my understanding is right the nvidia module loads later during the bootup and only is required for the X but not for the console itself).

[Code]...

View 3 Replies View Related

Ubuntu :: Control What Buttons/menus Are Listed And Which Icons Are Listed Under Each?

Jul 26, 2010

i just upgraded to ubuntu 10.04 the netbook distro. at the desktop view there is a list of about 10 buttons/menus listed on the left hand side, is there anyway to control what buttons/menus are listed and which icons are listed under each of them? having a netbook i would like to remove and unclutter the desktop view as much as possible but i dont want to remove those apps i still want to be able to open those apps if i want to even if by removing those icons and menus/buttons makes it a pain.

View 1 Replies View Related

OpenSUSE Hardware :: Auto-detection Of Printer In 11.1?

Sep 20, 2010

I have two pc`s . one i have installed it with openSUSE 11.1 and another with openSUSE 11.2. When i connect my printer HP Laserjet to 11.2 it get automatically configured, while when i connect the same printer to 11.1 it will not get automatically configured. I will have to use hp-setup tool to setup my printer. When i googled i collected some information that 11.2 version uses udev-configure-printer to automatically setup the printer whereas in 11.1 i did not find it. What changes that i will have to make in 11.1 to setup my printer automatically..?

View 2 Replies View Related

OpenSUSE Install :: Installation Stuck On Hard Drive Detection?

Feb 9, 2010

I downloaded x86-64 hybrid DVD and done everything according to instructions from Installation without CD - openSUSE.After booting from USB HDD, the first page took about 3 minutes to switch menu to the installation media option then afterwards the installation got stuck on Hard drive detection (probably 2 hours before i rebooted into windows 7). Installation scenario is:

Machine: Compaq presario C767TU
HDD: 320 GB with Windows 7 Ultimate on root partition, all other partitions NTFS
Free Space for Linux: 30 GB (Extended partition) currently having Mandriva 2010 with /swap 2GB, / 10GB,

[code]...

View 9 Replies View Related

OpenSUSE Network :: Vpnc Killed Due To Dead-peer Detection / Fix It?

Sep 7, 2011

But I don't think my peer is dead.

View 1 Replies View Related

Fedora :: Set Monitor Resolution To 1280*800 In F13?

Nov 5, 2010

I have a 22'' monitor. And I would like to set resolution to 1280*800. This is the resolution set in Windows in my computer in another disk partition. So I dont understand why I can't do the same in Fedora 13. The default resolution is 1680*1050, but everything looks too small. Other options I can choose are uselesnes because it distort everything.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved