OpenSUSE Hardware :: Canon MF4150 Printer Does Not Print Anything After One Printing?

Oct 23, 2010

I have Canon MF4150 printer. I have downloaded Linux Printer Driver (UFR II) Ver.2.10E from canon asia site. Adding the printer and printing work fine, except that after one printing, the printer stops working. There is no error message./var/log/cups/access_log shows

Code:
localhost - - [23/Oct/2010:19:53:55 -0500] "POST /printers/Canon-MF4100-Series HTTP/1.1" 200 45240 Print-Job successful-ok

[code]...

View 1 Replies


ADVERTISEMENT

OpenSUSE Install :: Canon ImageCLASS MF4150 Printer Driver

Jan 23, 2010

I need to install the driver and I downloaded the Canon install package. The instructions read:

# rpm -ivh [file name of common module for CUPS drivers]

This rpm package construct was used in the Fedora distro.

Does it also work in openSUSE?

The only other construct given was for a deb package.

I looked in YasT for the driver but it was not there.

View 9 Replies View Related

Ubuntu :: Canon Mp470 Printer - 10.10 - Able To Print Black And White But Unable To Print Photos

Dec 26, 2010

My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?

View 5 Replies View Related

Ubuntu :: Canon MX340 Printer Not Printing?

Feb 4, 2011

Been using ubnutu gnome for a loooong time and my printer (Canon MX340) has been running just fine, configuration and usage.

I now switch to kde. configure my printer the same way i would under gnome and as soon as i send a job, it processes for about 3 seconds and just marks "stopped" under status. nothing goes through anymore!!

i've updated from 4.5 to 4.6 with backports and nothing is happening on there either.

im running maverick amd64 and using the i386 drivers (with dpkg -i --force-all) which are still recognized even under kde.

p.s.: the printer normally runs as wireless standalone (no samba/cups involvment whatsoever)

View 9 Replies View Related

Ubuntu :: Printing With Canon MX330 Printer?

Jan 15, 2010

Is there a way to print from a Canon MX 330 All-in-One printer in Ubuntu 9.04? I'm trying to print through a Linksys WRT54G router. The printer is physically connected to a Desktop PC running Windows Vista (64-bit).I've tried installing the printer though CUPS to no avail. I tried the iP4600, iP3600 and iP2600 drivers and none of them have worked for me. I've even tried the Gutenprint PIXMA IP4600 drivers.

View 2 Replies View Related

Debian Configuration :: Can't Print From A CANON LBP6020 Printer

Aug 4, 2015

I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:

Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....

View 3 Replies View Related

Networking :: Print Wirelessly On MP800r Canon Printer?

Dec 2, 2010

I would like to know if it is possible to configure my laptop so that it can print wirelessly on my MP800r canon printer, and if so then how to configure them to make this operation possible. I'm using Ubuntu.

View 1 Replies View Related

Ubuntu :: Printing - Print Job Shows The Printer Status As "idle" And The Print Queue Is Empty

Jul 15, 2011

Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.

View 9 Replies View Related

Fedora Hardware :: Canon S100 Printer Doesn't Print

Sep 6, 2010

F13 showing that Canon s100 printer is founded, installed drivers and everything seems to be OK. But when i try to print text, testpage of what ever, nothing happened. Installed system-config-printer 1.2.4-1.f13, same udev and libs. Cups 1:1.4.4.5.f13, libraries, php modules Here is the Error msg:

[code]...

View 14 Replies View Related

Ubuntu :: Canon Pixma Ip90v Bluetooth Printer Cant Print?

Mar 10, 2011

I am looking for a good new ALL IN ONE printer that will be compatible with Ubuntu right out of the box (scanner and everything).

I am also looking for a portable bluetooth printer that will be compatible. I currently have a Canon pixma ip90v bluetooth printer but I cant get it to print AT ALL and Ive tryed everything.

I am currently running 3 computers with Ubuntu 10.10 and one with 11.04 Alpha 3.

View 4 Replies View Related

Slackware :: Libreoffice3.3.2 Printing In SW13.37 - Doesn't Print The Same Font On The Printer

May 21, 2011

After installing libre3.3.2 using the Slackbuild scripts, I found that it displayed fonts correctly, but doesn't print the same font on the printer. The output of the printer should be Arial, but is instead some elongated, overlapping mess.

The same Slackware package installed on SW13.1 prints normally. (Same computer, different partition)

Spadmin used to control the printer fonts, but apparently not anymore.

System: Linux nadrek 2.6.37.6-smp #2 SMP Sat Apr 9 23:39:07 CDT 2011 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ AuthenticAMD GNU/Linux.

View 14 Replies View Related

Fedora :: Printing From A Samba Printer Error Test Page Failed To Print

Jul 20, 2009

I have a FC11 box, with an HP prineter attached. I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5. I am not sure what is missing. when I tried to print from the XP box I got "Test pge failed to print" error.

View 9 Replies View Related

OpenSUSE Hardware :: Does This MP620 Canon Printer Work?

Jun 11, 2010

I am interested in acquiring a Canon MP620 printer scanner. I am looking at the printer list from linux.com, and I don't see it there. Wondering if it works really good with Opensuse.

View 5 Replies View Related

OpenSUSE Hardware :: Can't Find Canon MP280 Printer

Nov 27, 2010

I just downloaded and installed openSUSE 11.2. It looks good. Very fast and extremely stable.

My problem is that I use a 'Canon MP280' Printer / Scanner / Copier.

It seems that my printer and openSUSE are not compatible.

OpenSUSE can't find Canon MP280.

View 6 Replies View Related

OpenSUSE Hardware :: Printer (Canon MX700) Configuration On 11.4

Sep 6, 2011

I have just installed OpenSuse 11.4 on my old desktop Compaq Presario, I coming from an amount of experience with Linux, anyway, for the moment I have a problem with my printer connected on a domestic network, this printer have an assigned address as the same as for my desktop and all other devices of this network, but I'm not able to connect with it, if I try to connect the printer by USB I haven't no problem, more strange is because of the printer have got a scanner and I was able to connect it via network, the same problem I had with Ubuntu.

View 9 Replies View Related

OpenSUSE Hardware :: Canon I860 Printer Drivers Not Included In 11.2

Feb 23, 2010

I recently installed openSUSE 11.2 on a computer with a Canon i860 printer attached to it. Previously this computer had Ubuntu 9.10 installed on it. When Ubuntu was installed on it, the computer found and printed on the Canon i860 printer just fine. When I installed openSUSE, the list of Canon drivers did *not* include the Canon i860. Just for giggles I selected Canon BJC 4000.

It prints, but it "misbehaves" - For example, if I want to print a document that says only "Hello world", it will print it, but it prints it about 20 times on one sheet. I figure this insanity is caused by the improper driver I selected. I'm not expert enough to know how to get this printer working. And - why would it work okay in Ubuntu 9.10, but not openSUSE 11.2? Did I do something wrong while installing openSUSE?

View 3 Replies View Related

OpenSUSE Hardware :: Canon MF4350d - Data Error On Printer

Mar 27, 2011

Have updated my system to 11.4 (Fresh install) and installed the driver from canon, and when you print the test page, it prints fine. But it now when I want to print a pdf or web page where it will say printer data error on the printer. Another thing is that it seems to print fine when the document is plain text like if I print a document from libre, it will print or when i send a print test page. Also when the document does not go through, the cnpkmoduleufr2 sits in memory and then chows 50% of cpu. In 11.3 worked beautifully so am thinking that this is a software issue.

View 8 Replies View Related

OpenSUSE Hardware :: Setup Printer A Canon Pixma MP530?

May 8, 2011

When I try to set up my printer a Canon Pixma MP530, there is no driver! Only the Generic ones and they don't work. On Ubuntu using the Pixma MP500 driver works just fine, but there is no option for that on suse. Only for HP and Generic. The only solution I have found was turbo print, and that costs $30. I am hoping to find a solution, I really like SUSE, but I may have to go back to Ubuntu.

View 9 Replies View Related

OpenSUSE Hardware :: Installing Intuos2 Tablet And Canon MP620 Printer?

May 7, 2010

Need to install a Wacom Intuos2 tablet. ALso Have a Canon MP620 multi-function printer that YaST does not see. It tells me that it is a bad port. I have pinged it and it is there but YaST won't let me install it.

View 8 Replies View Related

OpenSUSE Hardware :: Canon Pixma Printer Not Working Anymore After Installing 11.3?

Aug 4, 2010

I have a canon pixma mp640. Under opensuse 11.2 64 bit the printer worked (printing and scanning via wifi). I recently reinstalled my system with 11.3 64 bit, and after installing the canon rpms and creating the printer I get the following error in /var/log/cups/error_log:

Code:

Backend returned status 1 (failed)
printer-state-message="Illegal backend: Success"

In opensuse 11.2 I needed to create some links:

Code:

cd /usr/lib64/cups/filter
ln -s ../../../lib/cups/filter/pstocanonij
cd /usr/lib64/cups/backend

[code]....

View 6 Replies View Related

OpenSUSE Hardware :: Cannot Find Drivers - Canon Wireless Printer 5250

Nov 13, 2010

Bought a Canon all-in-one (printer, copier, scanner) today, which prints beautifully on XP & connects to our WiFi without problem. Only downside, is it can't find a driver for Linux. Anyone out there using this printer under Linux, or any pointers to the right driver?

View 3 Replies View Related

OpenSUSE Hardware :: Recent Updates Killed Operation Of Canon MP 460 Printer

Jun 7, 2011

I have been running my Canon Pixma MP460 for years on suse linux. Worked fine also after upgrade to suse 11.4. I was running MP460 using MP160 drivers as per some forum information when 460 drivers were not available. Some recent updates, however, have killed operation of my printer. Will not even print a test page. I have tried my old MP160 driver and variations of same and new MP460 drivers from CUPS-Gutenprint.

Consistent error message is: "The PPD version (134566257) is not compatible with Gutenprint 5.2.7."

I downgraded and upgraded CUPS. I have deleted and reinstalled many printer drivers for MP160 and MP460. I have run the "cups-genppdupdate.5.2" per the error log message and other cups update programs in the same directory. Keep getting same message. Printer works when I reboot to windows 7 so hardware has not failed.

System is: Suse 11.4 32 bit w/usb mp460 printer.
Hate to bid farewell to my old faithful printer.

View 9 Replies View Related

OpenSUSE Hardware :: Canon CAPT Printer (LBP5050n) Stopped Working In 11.4 ?

Jul 17, 2011

After upgrading to OpenSuse 11.4, my CANON LBP5050n printer stopped working.

I have cndrvcups-capt-2.20-1.x86_64 installed and these are the command which used to work:

View 1 Replies View Related

Ubuntu :: Printing Corrupted - Get Substituted / Print A Blank Space / Print A Box

Mar 23, 2011

Interesting problem: For the first time with Xubuntu 10.10 64bit, I am finding certain applications print corrupt. A varying amount of letters / numbers either get substituted/print a blank space/ print a box etc etc. This corruption seems to happen from a Pdf ( evince ) or Spreadheet ( Gnumeric ) Opening the same Pdf on another machine (ubuntu 10.10 32bit) prints perfectly. Opening the same .xls file on the original computer but using OOo Calc prints perfectly.

I guess I have ruled out any problems with the printer itself or the network JetDirect box. I have re-installed CUPS and evince and upgraded to the latest version of HPLIP but the problem appears unchanged.

View 2 Replies View Related

OpenSUSE :: Printing PDF's And Stopping The Printer?

Jun 4, 2011

I'm having trouble with printing a PDF that is in landscape mode. When I tell Okular or Adoble Reader to print a document in landscape mode, the text is Illegible. If I tell it to print as portrait mode, then I can read the text but the end is cut off and there is no way for me to tell Okular or Adobe Reader what the margins are. That option was grayed out.

I'm having another problem: When I cancel the job from the CUPS interface, it says it canceled the job but the printer keeps going and finishes whether I want it to or not. With 11.2, I was able to have it set up so that when I told it to stop the printer, it did so right away. Why can't I get the printer to stop in the middle of a job if I see something wrong with it so that I don't have to waste ink?

View 9 Replies View Related

OpenSUSE :: Cannot Find Resume Printer/printing?

Jan 23, 2011

In December I finally filled up my root partition and broke Suse 11.1. I therefore resized my partitions and installed Suse 11.3 on /root. I didn't not touch my /home partition.

Last week I had a paper jam in the printer. This has been cleared and as far as I know the printer is now fine. However the printer will not print. In url, it says printing has been paused, but I cannot find resume printer/printing anywhere.

I have tried Google, but the instructions do not appear to match where I would find 'resume printer'.I am able to provide further information.

View 3 Replies View Related

OpenSUSE Hardware :: Printer Is Printing After Reboot?

Nov 2, 2010

I have an HP C4795 printer and lately when I print something nothing happens until I reboot and then the printer will print. How can I fix this problem? This was printing from Okular pdf reader.

I'm running openSuse 11.3 KDE 64 bit.

View 7 Replies View Related

OpenSUSE Hardware :: HP Printer Not Printing Colors Right?

Apr 9, 2011

I am not sure if this is the right place for this or not, but I am having a problem getting my HP6300 series all in one printer to print photo's with proper colors, all colors seem to run. I have hplip installed and set up to print photo's and it still prints colors like runs instead of correct.

View 9 Replies View Related

OpenSUSE Network :: Printing To Shared Windows Printer

Apr 7, 2010

I want to print from my linux box to my win7 pc that has a shared printer. I have cups installed and tried to add pritner using samba, but was unsuccesful, gave me an error when trying to add. The guide i followed is: Yet another Linux to Windows printing tip -- Debian Admin The printer model is a dell 2330d laser printer, it is not in cups, so i added the ppd file i got off the dell support site. I am aware that there is a native suse driver, but i want to print to the windows printer.If possible I would like to know how to do this via command line instead of the GUI.

View 9 Replies View Related

OpenSUSE Network :: Firewall Is Blocking Printing To Remote Printer?

Jan 10, 2010

Printer is connected via USB to server PC running OpenSUSE 11.1 Client PCs are running 11.1, XP, Vista No problem printing from the Windoze machines

Printing is trouble free with the 11.1 client's firewall disabled, but no printer is available with firewall running.

In hopes of diagnosing the problem I figured I'd open everything I could think of until the printer remained available with the firewall running. Then I planned to start removing exceptions one at a time 'til removing one caused the printer to disappear.

I've gone to Yast>Security and Users>Firewall>Allowed Services>External Zone and tried addingSamba Server
NetBIOS server
Samba Client
Samba Server
VNC

[Code]....

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved