I had installed openSuSE 11.0 and then installed XEN using 'Install hypervisor and Tools' which is present in Computer -> YaST -> Virtualization.
After that I rebooted the machine in XEN mode[Dom 0]. There I installed a Virtual machine[Dom U] with OpenSuSE 11.0 Operating system using the option 'Create Virtual machine'which is present in Computer -> YaST -> Virtualization.
VM[Virtual Machine] got installed successfully and started running in TightVNC. I shutdown the VM and restarted it and it started running successfully.
After that I shutdown XEN[Dom 0] and restarted the machine in XEN mode again to run Virtual machine[Dom U]. But this time I got the below error when I selected the 'Run' option in installed VM.
The program I want to use: ProppFrexx Tagger or ProppFrexx Meta Data Editor, can be found here: ProppFrexx ONAIR - The Playout and Broadcast Automation Solution I need this to tag WAV files with RIFF INFO Tags.The Sony PSP can read RIFF Tags! so yeah, that's the reason I need this program. here the complete error message
I have a minor problem with gvim. My gvim never maximizes. Whenever I try to maxmize it automatically shrinks from right side and bottom. Don't know if anyone else faces this problem, but I have faced this even after re-installing the system It is not a show stopper but surely an irritant.
I usually run my updates every Friday, my last good update was 4-Mar-2011. I could not update this week and got an error -"PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium http://download.opensuse.org/repositories/openSUSE:/Tumbleweed:/Raw/openSUSE_Tumbleweed_standard/'"I get a similar error message when starting Yast Software Management.Is this related to the 11.4 release? I'm waiting for fewer bugs before I upgrade to 11.4, so I'd like to be able to keep current with 11.3.
I was about to do upgrade from 11.3 to 11.4.I was following the guide I found in opensuse's website. I was to the point where I had to disable all 11.3 repositories and add the 11.4 at that point I forgot to change my nvidia repository ( I have a g210m graphic card).
thus after the upgrade the X could not start at all. I think this was because Yast could not find the nvidia driver.
Using text mode YaSt2 I added the nvidia driver but after restart I can not see and X running. I receive an error message that the current kernel can not be loaded!!!
I also checked in command line if there is something like Sax2.. but I couldnot find anything.
I just installed the LAMP server on my system then rebooted, expecting the daemons HTTPD, MYSQLD, FTPD, etc. to start. When they didn't, I didn't panic I just attempted to run "sudo service start httpd". Surprise, suprise - "command not found". how do I start these daemons?
I installed OS11.4 on my old laptop, Compaq Armada E500., 512MB RAM, ATI Rage Mobility. During installation I chose "minimal server" and added some development packages, lxde and a little more. I chose to start in runlevel 3 which is full networking without X. Still, when computer is booted it tries to start Xorg which doesn't work because of some problem w driver. The start-up seems to stop there, it never loads completely - seems most things in runlevel 3 are not started (see below) I can manually login on laptop and fix it - but never permanently, same thing again after reboot.
I have checked /etc/inittab & yast - both states default runlevel is 3. I have checked services to be started both directly, browsing directory /etc/rc.d/rc3.d/, and with YaST, it is very clear X should not load during boot. But, as said, it does.. I don't really care about the driver problem right now, I can fix that later when I have more time. So how do I stop X from getting started automatically?
More info, if needed: The installation also stopped with message on tty1 "Starting YaST2" and tty8 showing errors with graphics driver (mach64). The system seemed to be installed though, so I simply rebooted (issuing "reboot" from tty2).
I'm not completely sure where it stops, network is configured but keyboard is wrong and mysql & everything after is not started, so somewhere between S02network and S06kbd. I'm going to use it as a server for testing purposes so no X is actually needed - however I do want to have X & lxde installed just in case, my Internet connection at home is terribly slow so I need most things I might need in the future installed today.
I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
I have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
I installed the dovecot with aptitude in the debian squeeze, and want to use dovecot as imap and pop3 server with exim4 for my mail server, i configured the dovecot and exim4, but when want to start the dovecot get this error:
We are running MailScanner 4.83.4-1 on a CentOS 5.6 64-bit distribution. The status of MailScanner was checked hourly via the check_mailscanner script, and normally the e-mailed result was:
Which indicated the process was running without issue.
The server in question sits outside the company firewall, and was configured to deliver e-mail messages directly to their intended recipients. Our company recently changed its policy concerning external e-mail servers to require them to send their e-mails to their destinations via an e-mail gateway server. Consequently, the server was reconfigured to relay its messages to the gateway, and is no longer delivering messages directly to their recipients.
When the change was made, I noticed the check_mailscanner script was sending a new message which read as follows:
I have tried starting and restarting the MailScanner software via the /etc/init.d/MailScanner script. The output of the script seems to indicate that MailScanner starts, but a subsequent check for the application via the ps -ef |grep MailScanner command shows the command is not running.
I checked the /var/log/maillog file for any reference to this when I did the restart of MailScanner, and the excerpt shown below coincides with the time that I ran the script:
After upgrading Squeeze, Gvim and Vim seems to be broken. So I went back to 7.2 by compiling from source. However I am failing to compile the gui version under Debian. I tried the configure options, apt-get build-dep vim etc but nothing seems to work. Does anyone know a straight way to make it work? Or even a way to find the previous version of vim gtk?
I'm new to vim and gvim, but I feel its power so I want to learn it. I've been searching very long how to use gvim keyboard shortcuts but I simply cannot find out what is for example the vertical splitting command '^Wv'? I've tried (ctrl/super+ a lot of things) (and other combinations, but without success).
I have to share gvim binary over the NFS for users on a x64 machine. I can't find it over the internet. Is there anyway I can convert the vim-X11.rpm to .bin? or achieve the same in any other possible way.
I can't get Kaffeine to start. So i tried to run it from Konsole and I get this Code: kaffeine: relocation error: /usr/lib/libphonon.so.4: symbol pa_ext_device_manager_read, version PULSE_0 not defined in file libpulse.so.0 with link time reference
I updated / installed phonon Pulse. Now when I insert a DVD and select Kaffeine. I get this error: Cannot find input plugin for MRL [dvd:/] Now I have no sound.