OpenSUSE :: Bomgar Work On OS11.3 64bits?

Jul 30, 2010

Im about to get some support from Novell using Bomgar. Bomgar support SUSE, Ubuntu, Redhat, Fedore, but i can't find anything about OpenSUSE.

Anyone know if Bomgar work on OS11.3 64bits?

View 1 Replies


OpenSUSE Hardware :: Make Creative HS-1200 Wireless Headset To Work In OS11.1?

Jan 2, 2009

Is there any possibilities to make Creative HS-1200 wireless headset to work in OS11.1?

It shows up in Mixer panel, but i cant in any way configure it or make it work. It seems its been detected in some way, but i Yast-Sound it doesnt show up. Only in KMix.

View 3 Replies View Related

OpenSUSE :: Use 'make' Command Gnome On OS11.3?

Oct 21, 2010

At the moment 'make' returns this:

./kernelversion.c:13:30: fatal error: linux/utsrelease.h: No such file or directory
compilation terminated. *** Cannot detect kernel version - please check compiler and KERNELPATH. Stop.

I would do a little more homework, but I already did a lot only to get stuck here, and I need to solve this sooner rather than later.

I have already: installed devel and desktop-devel and given up about 350mb of diskspace to

zypper in -t pattern devel_C_C++

Only to still not have the make function available.
If that install was unecessary, I'm hoping there's a simple uninstall version of that line.

Reading what it's saying, it sounds like I may have all the right kit but it needs a nudge in the direction of the kernel??

View 3 Replies View Related

OpenSUSE :: OS11.2/KDE 4.4: Akonadi Control Center Missing

Feb 18, 2010

I recently upgraded my SuSE 11.2 to KDE4.4 from "". Most things run fine, however the "Akonadi Control Center" does not appear in my KDE "System Settings". Akonadi itself seems to run, at least Contact uses it for the addresses.

I searched for all "akonadi" packages, but I didn't find ones which I do not have installed.

View 5 Replies View Related

OpenSUSE :: Trashed VMWare Install - Want To Reinstall (OS11.2 X64)

Jun 9, 2010

I am running OpenSuSE 11.2 64bit which was upgraded from 11.1. When I moved to OS 11.2, I found out the hard way about VMWare not working. Then tried to remove it and fix it myself.

When I try to run the config script...
parents:~ #
Unable to find the answer LIBDIR in the installer database
(/etc/vmware/locations). You may want to re-install VMware Server.
Execution aborted.
parents:~ #

When I try to install vmware-server
parents:~ # rpm -i VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed

When I try to upgrade vmware-server
parents:~ # rpm -U VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed

When I try to force install vmware-server
parents:~ # rpm --force VMware-server-2.0.2-203138.x86_64.rpm
rpm: only installation, upgrading, rmsource and rmspec may be forced

Other than rebuilding my box, how can I recover from this?

View 2 Replies View Related

OpenSUSE :: OS11.3 - Get Banshee / Rhythombox To Play M4a - Aac Or Similar?

Aug 2, 2010

Has anyone succeeded in coercing either banshee or rhythmbox to play "restricted" media? On my 11.3 install, I have all the packages from the "one-click" install that takes 49 clicks to find on the new wiki structure ... Playback works correctly in mplayer, gnome-mplayer, and smplayer. VLC works also, ... yawn ....

This is the third consecutive release [COLOR="rgb(0, 0, 0)"](AT BEST)[/COLOR] where this stuff is badly broken! By badly broken, I mean that installing all the needed software and codecs does not appear to be the only requirement. I was able to get it working in 11.1 and 11.2, but only via a hit and miss series of un-install the packages, reinstall one by one ... making offerings of fatty sheep ... reinstalling again .... performing the second part of the ring cycle for the neighbours cat ... remove the codecs again .... install again ... wow ... it's working ... set the entire system to ro ... sing for the cat again!

Does anyone have any insight as to why gstreamer is SOOOOOOO foobared in OpenSUSE? Can anyone articulate a series of steps that will actually get the desired result? BTW, getting this stuff working in FC13 is trivial. Add the fusion repo and install the codecs! I remember a better day in SuSE land when one added the packman repo and installed the codecs ...

View 1 Replies View Related

OpenSUSE Install :: Get OS11.2 To Recognize LVM Drive On Boot?

Nov 13, 2009

everytime i boot up I have to:

# vgscan
# mount -a

what is the command to get suse to automatically run vgscan at boot?

View 4 Replies View Related

OpenSUSE Install :: White Screen While Booting OS11.3?

Feb 18, 2011

I created bootable USB stick in Ubuntu the hard way in console. When I am booting and when my status bar is half full with white color I get white screen, where is the problem please?

View 9 Replies View Related

OpenSUSE Wireless :: OS11.2 Installed But WLAN (Atheros5212)?

Jan 15, 2010

After been convinced by an exchange student from Nashville I am hosting here in Germany I went into openSuse 11.2. I installed and got openSuse 11.2 to work. I must admit, that I was very impressed. It is more than 10 years that I tried a UNIX system and Linux was quite a cryptic thing. First some additional drivers had to be installed to get MP3 to play. However Internet access was possible with cable but the system failed in recognizing the WLAN.

Here is my system:
HP Compaq nc4000
OpenSuse 11.2 (i586)
KDE 4.3.1 "release 6"
Wireless Network
Atheros AR5212

I have looked through some posts but must admit, that I did not understand much of that. I Am willing to learn, however I do not see myself compiling some drivers. If you could tell me which URL could be used for dloading or installing via Yest, If more sophisticated solutions, than I will have to ask my student to do it for me, but he should learn German and learn more about German lifestile in German Bars.

View 1 Replies View Related

SUSE / Novell :: Install OpenSuse 11 64bits On A Box Already Has 32bits OpenSuse Installed?

Nov 23, 2010

I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?

View 7 Replies View Related

OpenSUSE Install :: 11.2 64bits Netinstall Can't Find Opensuse Repositories?

Jan 14, 2010

I am trying to install openSuse 11.2 from netinstall disk into a vmware virtual machine under vmware server 2 (free edition). The installation process starts ok, but later i receive a warning indicating that the opensuse repository can not be found. ( /)I have checked the network setup and works perfectly, also i can ping from console successfully.

View 4 Replies View Related

OpenSUSE Install :: KDE3 Disappeared From Graphical Login Selection (OS11.0)?

Feb 21, 2010

I used KDE3 with 11.0 with some KDE4 apps till I needed some applications from the KDE4 factory tree and mistakenly left the repository active. Next time the online update also updated most of the applications I would rather keep, and as a result the KDE3 disappeared from the KDM login choices. So I have two questions:1. how to enable users to select KDE3 at login (currently I have to select failsafe mode and run startkde manually)2. how to replay back an update I didn't want to have?

Perhaps a combination of the above: can I upgrade to OS11.2 and keep KDE3? (please don't tell me to switch to KDE4, I acknowledge and appreciate the effort and the improvements that KDE4 got, but it's still not a replacement for KDE3 - there are so many simple things which are impossible in the new version)

View 9 Replies View Related

OpenSUSE Hardware :: Using A UPS That Works With 11.2 64bits?

Sep 8, 2010

I'm looking for a UPS for my computer setup. This one looks interesting:CyberPower CP800AVR 800VA 450W. The docs say: 'HID compliant USB port enables full integration with built-in power management and auto shutdown features of Windows, Linux and Mac OS X' Unfortunately I don't really know what that means? Will it work with OpenSUSE? My machine is not very power hungry buts its not light-weight. It's a quad-core system with 5 SATA disks, 2 burners, a 30" display plus some smaller accessories. It takes about 2-3 mins to shutdown due to all the services I have running on it, so to be safe I need a little margin of shutdown time from there.

Anyone used this UPS? or something similar? APC and Cyberpower are generally easy to get and have models which I can afford.

View 9 Replies View Related

OpenSUSE Hardware :: Wireless Device Crashes OS11.2 - Encore Electronics ENLWI-G2

Dec 19, 2009

i just installed a new wireless device from encore electronics(802.11g Wireless PCI Adapter ENLWI-G2) but it deadlocks openSUSE 11.2 when i start the networking module in YaST. It also deadlocks(Freezes up) when i tried reinstalling suse. can someone help me, has anyone got this device to work? I also tried Fedora 12... it manages to see my wlan and posts the mac address of the card.. but it also locks up while trying to use it or configure it

View 9 Replies View Related

OpenSUSE :: Samba Broken After Update To 11.4 (64bits)

Mar 12, 2011

After the update, the smb daemon will not start:
jarfx:/etc/init.d # ./smb start
Starting Samba SMB daemon [2011/03/12 09:04:08, 0] lib/fault.c:250(dump_core_setup)
Unable to setup corepath for smbd: Permission denied
[2011/03/12 09:04:08, 0] smbd/server.c:1134(main)
smbd version 3.5.7-1.17.1-2505-SUSE-SL11.4-x86_64 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/03/12 09:04:08.069212, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/03/12 09:04:08.070086, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/03/12 09:04:08.070189, 0] smbd/server.c:1234(main)
ERROR: smbd can not open secrets.tdb

View 9 Replies View Related

OpenSUSE Install :: Recent Update Of Os11.3 Left System With Boot Failure / File Not Found

Nov 4, 2010

Toshiba notebook is set up to triple boot win7, mepis 8.5 and os 11.3.Recent update of os11.3 left system with boot failure, "file not found".I booted mepis and used utility to reinstall grub, but no joy.
Appeared to install ok but on reboot, sda5 identified as 'mepis' not os11.3 and would not boot. Win7 & mepis boot ok.

Next, booted live Parted Magic and repaired as per another thread here, but again, no joy.NONE of the systems will boot.Rebooted mepis live cd and reinstalled grub again. Sda5 still identified as mepis and will not boot. Win7 & mepis boot ok.

View 3 Replies View Related

OpenSUSE Wireless :: Get Internet Through CDU680 Modem Of Franklin And Cmotech In 64bits

Jan 11, 2011

i've benn reading for a while so that i choose to use opensuse as my linux but i need internet on my computer and the only way i can get it is throuth my CDU680 modem of franklin and cmotech, but i dont understand the xplanation of other forums and i would like one step by step of my case. I use open suse 11.3

View 1 Replies View Related

OpenSUSE Install :: Unable To Install OS11.2?

Mar 1, 2010

I downloaded the latest stable release from the opensuse download site and when I try to install it, it fails. Basically, the installation reaches 50% and then I get a message : Failed copying image file to hard disk. The hard disk on my PC is 18GB and the installer suggests 10.7 GB for /home and 7.2 GB for /root. I read somewhere that /root needs to be allocated a min of 10 GB, but the installer does not let me change the size /root to more that 7.2 GB. how can I go about installing it?

View 9 Replies View Related

Slackware :: Firefox 3.6.12 For 13.1 64bits?

Jan 25, 2011

Where can I get Firefox 3.6.12 for Slackware 13.1 64bits? I can get nightly builds from mozilla e.g. Namoroka, but not a stable release..

View 5 Replies View Related

Fedora :: Wine Won't Go Fullscreen On F11 64bits?

Nov 11, 2009

I've just migrated to Fedora after 2 years of Ubuntu, and I'm rather happy with it, except for one problem left. When I launch a windows program through wine (I've only tried games yet), it won't go fullscreen. I tried everything I fond on the internet: disabling compiz, enabling/disabling virtual desktop, but no matter what, my game is still on a tiny window. I tried switching my resolution to the one of the game, it doesn't change anything. And pressing alt+Enter doesn't change anything either, except sometimes crashing the game. The 32 bits libraries for xorg-nvidia are installed, and I don't see what could cause this problem.

View 6 Replies View Related

Ubuntu :: Install The Vdso In U 9.04 64bits?

Jan 24, 2011

install the in my ubuntu 9.04 64bits. I need it because multiple applications that I have programmed need it due to an inclusion of a 3rd party software. As I have seen this library is only available to fedora suse and other rpm OS. Should I install in my ubuntu machine? and how? I already tried to use the getlibs and tried to downloaded it but I didn't find it anywhere.

View 2 Replies View Related

Debian Multimedia :: Compile Wine 64Bits ?

Apr 8, 2011

Actually, it's recommended to compile (and build) wine 32bits. But, it's possible to build Wine in 64bits and 32bits with the same sources. The solution is explain in this page : [url]Building a shared WoW64 setup.

With this solution, if Wine 64bits is installed on your system, you can create a 32bits wineprefix by this command :

To use this command, you must to compile and make wine twice in 2 differents folder, like explain :

How to compile and make twice without problem in the "rules" files in the debian folder when i want to build a package?

View 2 Replies View Related

Ubuntu Installation :: 10.04 (64bits) Boots Sometimes But Most Often It Doesn't

Sep 23, 2010

The problem i have is that after sucessfully installing Ubuntu 10.04 (64bits) when i start my PC and i get to grub2 and select Ubuntu it will get stuck at a blank screen with only an "_" flickering on the top of the screen. At first i thought "Hey, maybe it just takes a while to boot" but after letting it sit there for about 20 minutes and nothing happening i decided to restart my PC. And then the same thing happened like 5 times. BUT on the 6th try it booted sucessfully! And everything was working perfectly but as soon as i restarted my PC i would encounter the same problem.

Details I should probably mention that i had the exact same problen on the install process. I tried with a CD i had burned the image on and it would show me install options (Try and install, install, etc.) But when i selected either one of those i would get the "_" flickering and nothing ever happening. Then i tried it with a DVD thinking that the CD was the issue. Same thing. After that i tried with a USB drive and i would get the same exact problem, but on the retry on the USB drive the planets aligned in such a way that i actually got the Virtual Ubuntu loaded from my USB drive.

So it installed sucessfully and when i restarted it i got to GRUB and selected Linux and the "_" would start showing and nothing ever happens. On the <random number> of restarts it actually launched and it picked up my audio, video cards, other NTFS drives, etc. But when i restarted i would get the problem again. I even went trough the whole install process AGAIN (getting it to read from the USB flash drive, starting on Ubuntu) and still no consistent results. Though on the second install it didn't pick up my audio hardware nor my other NTFS drives until the second restart where i was able to use Ubuntu normally. I even upgraded what it told me to upgrade. (now i have two "different" versions of ubuntu on grub, each with it's own safe mode only different by a .24 and a .25 on their names) and right after upgrading and restarting it booted immediately. But after that i'm getting the same issue over and over again.


View 8 Replies View Related

Ubuntu :: Open Arena 64bits With No Bots

Dec 25, 2010

Recently I installed Open Arena but didn't had time to play it at the moment. Well I had some time to play and it run very well except for absolute no bots at all. Tried all ways Single player and Multi-player, Skirmish add bots buttons are active but they don't work.
Here the terminal output: (I simply opened the game and close it, if you want me to enter single player or other options just tell me I'll post the output)

ioq3+oa 1.35 linux-x86_64 Dec 18 2009
----- FS_Startup -----
Current search path:


View 7 Replies View Related

Ubuntu Servers :: Can't Reach Port On 10.04 64bits

Jan 11, 2011

I have ubuntu Linux xxxx 2.6.32-21-server #32-Ubuntu SMP Fri Apr 16 09:17:34 UTC 2010 x86_64 / GNU/Linux / Ubuntu 10.04 LTS installed on two identical hardware machines. SSH server work, ping work, oracle11g server works, but on one of mi servers one port of a application that develp here can be reach, the port is 2809 (corba). If i do telnet xxx 2809 on the machine, port is responding, but if i do the same in any machine in LAN, dont respond. This only happend on one server!!! the other just work fine I have all firewall disabled!!


root@xxx:~# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination


View 5 Replies View Related

Applications :: Wrong ELF Class / 64BITS App Error?

Mar 6, 2010

Trying to run Secondlife-i686- app on Ubuntu 9.10 64 BitS I get


64-bit Linux detected: Disabling GStreamer (streaming video and music) by default; edit ./secondlife/ to re-enable.

Running from /home/pbureau/Downloads/SecondLife-i686-

/usr/lib/gio/modules/ wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/
/usr/lib/gio/modules/ wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/
/usr/lib/gio/modules/ wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/

View 9 Replies View Related

General :: How To Install Wine On Centos 5 64bits

Jul 17, 2011

i have centos 5 64 bits installed on my linux vps how can i install wine on it?i have installed vnc already complete guide with all commands as i dont know anything about linux at all

View 4 Replies View Related

General :: Use Ntpdate After Proxy On Ubuntu 10.04 64bits

Nov 18, 2010

Can I use ntpdate after http servers and how? I use Ubunto 10.04 64bits.

View 1 Replies View Related

Debian Hardware :: Marvell NIC 88E8056 In Version 8.3 64bits

Mar 3, 2016

I have an old Lenovo PC on which I have Debian 8.3 64bit with no desktop environment. It has an onboard Marvell 88E8056 NIC that SHOULD be able to run at 1Gb/s but the driver (SKY2) that is loaded will only do 100Mb/s.

So I try to get this thing to work with a new driver.

For that it seems I have to download it from here: [URL] ....

There I download which has directions on how to compile and install the SK98LIN driver.

Since I never done that before, I found this on youtube : [URL] ....

But where for him it does compile, for me it breaks off with saying missing version.h :

Check kernel header versiongrep: /lib/modules/3.16.0-4-amd64/source/include/linux/version.h: No such file or directory
./functions: line 1117: [: !=: unary operator expected
grep: /lib/modules/3.16.0-4-amd64/source/include/linux/version.h: No such file or directory
./functions: line 1126: [: !=: unary operator expected
(Kernel:3.16.0 == Header:) [ OK ]
Check kernel functions (Changed: nothing) [ OK ]
Compile the kernel (error) [ failed ]

An error has occurred during the compile proces which prevented the installation from completing. Take a look at the log file install.log for more information. Installation of package failed.

View 0 Replies View Related

Fedora :: GNS3 Graphical Network Simulator Cannot Run On 15 64bits

Aug 7, 2011

I run fedora15 64bits on dell xps l401x and i install GNS3 Graphical network simulator as like that [url]after i installed gns3 i can't run that.

View 1 Replies View Related

Copyrights 2005-15, All rights reserved