OpenSUSE :: 11.4 - Unable To Setup Core Path For SMB

Jun 11, 2011

I want to set up a PDC on my computer using Samba without LDAP, etc. The only thing I need is to share folders between the two ridiculous computers here. I got a 11.3 laptop and this 11.4 desktop. This is the /var/log/samba/log.smbd extract:

Code:
[2011/06/11 08:29:35, 0] lib/fault.c:250(dump_core_setup)
Unable to setup corepath for smbd: Permission denied
[2011/06/11 08:29:35, 0] smbd/server.c:1134(main)
smbd version 3.5.7-1.17.1-2505-SUSE-SL11.4-x86_64 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/06/11 08:29:35.951937, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/06/11 08:29:35.954910, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/06/11 08:29:35.955027, 0] smbd/server.c:1234(main)
ERROR: smbd can not open secrets.tdb

This is the /var/log/samba/log.nmbd extract:
Code:
[2011/06/11 08:27:48.682275, 0] nmbd/nmbd_become_lmb.c:395(become_local_master_stage2)
Samba name server ANTARES is now a local master browser for workgroup XXXXXXXX.WORLD on subnet
[2011/06/11 08:28:08.700572, 0] nmbd/nmbd_serverlistdb.c:343(write_browse_list)
write_browse_list: Can't open file /var/lib/samba/browse.dat.. Error was Permission denied
I have modified in Yast the User Authentication Source to smbpasswd and specified the correct path to the file...

This is the /etc/samba/smb.conf extract:
Code:
passdb backend = smbpasswd:/XXXXXXXX/smbpasswdfile
I erased all the samba related configuration files, uninstalled samba cli/ser samba-yast cli/ser and reinstalled, reconfigured and still have same issue. It worked very well with 11.1... (I clean installed 11.4 yesterday). I thought take sources from samba, compile and then see if it works...

View 4 Replies


ADVERTISEMENT

OpenSUSE :: Get Application To Utilize More Than One Core In Multi-core Setup?

Mar 27, 2011

I have a command line OCR program called OCR Shop XTR (Vividata corp) that I am using on a system with a 6-core AMD chip. I changed the bios so that the 6-cores were activated, but htop shows me that while the program is running, I am only getting activity on one core (the program maxes out the one core with consistent usage between 97% and 100%).

I have read that many programs are not written to take advantage of multiple core cpu's. However, I am just hoping that there is some way to get this program to take advantage of the extra cores. Does anyone know of a way to invoke programs from the command line which would spread the workload out among additional cores?

Here is the output of uname -a:Linux linux 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 athlon i386 GNU/LinuxAnd here is the output for one of the cores from cat /proc/cpuinfo:processor : 5

vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X6 1100T Processor
stepping : 0

[Code].....

View 5 Replies View Related

OpenSUSE Network :: Unable To Setup 10.3 As Samba PDC - The Network Path Was Not Found

Jun 1, 2009

I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.

View 7 Replies View Related

General :: Unable To Setup PATH Using Shell Script?

Feb 14, 2011

I am creating one bash script name as pathsetup.sh.

In that , I am trying to setup a path to my user profile. S my script content is as follows,

pathsetup.sh contains,
#!/bin/bash
MY_PATH=/home/arun/NS3/ns-3.9/build
export PATH=$PATH:$MY_PATH
echo "$PATH"

If I run the script, when run time it shows the MY_PATH added to PATH.

But, when I check it in terminal after run, it doesn't add the PATH.

if I put echo $PATH in terminal, it show old path.

How can I add path permanently to a user.

I read, ~.bash_profile , we can add the path permanently for a user.

But, I want to add MY_PATH for a specific time. I don't want any user change the file .bash_profile each time.

Just running the pathsetup.sh script, MY_PATH should be added to the user PATH.

Instead of .bash_profile, using shell script, can it possible to add path permenetly for a user.

View 2 Replies View Related

OpenSUSE Install :: Unable To Use Core I3 Intel Clarkdale Graphic Controller

May 22, 2010

I own a MB with H55 Chipset and a Core i3 540 with openSuse 11.2.I tried kernel 2.6.32 and 2.6.34 and the newest Xorg delete the xorg.conf and got a fine picture on the screen (same with xorg.conf and device "intel") Even HD MKV is possible. But in KDE I can only open one programm. If I try to open a second programm the desktop disappear and I get the KDM screen and have to login again and the former started programm is gone. Only if I start the programms via an open Terminal window the programms will run. I tried to delete all .kde(x) directories, but it�s the same after restart.Only if I use driver "fbdev" in the xorg.conf I get no problem. But then the screen is very slow.

Code:

hwinfo --gfx
09: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_42

[code].....

View 7 Replies View Related

Server :: Setup Apache2 To Drop A Core File When It Crashes?

Jun 1, 2010

I'm trying to setup apache2 to drop a core file when it crashes. I know that you need to set the CoreDumpDirectory directive in /etc/apache2/apache2.conf and run "ulimit -c unlimited" from the command line (and restart apache after the ulimit command). But, on a reboot, even though the output of "ulimit -a" shows unlimited, apache2 will not create a core dump file unliess you set ulimit -c unlimited again and restart apache2. There must be a way to configure apache2.conf or something so that ulimit -c unlimited is set prior to apache2 starting, no?

View 2 Replies View Related

General :: PATH Variable Setup?

Jan 22, 2010

One of my colleague ran into trouble with setting up of path variable.

Earlier the entry for PATH in /etc/profile was:

Code:

Now what he mistake is:

He added a new Lines at the end as

Code:

Now due to this he is unable to run commmands now because that has overwritten the earlier PATH varaible.
If he types now:

It shows:

Code:

View 7 Replies View Related

OpenSUSE Install :: Unable To Edit Partitions During Setup (11.2 X64)?

Jan 21, 2010

I can't edit the partitions in the install setup. When I go tyo the Expert Partitioner, I see a hard disk (sda) with no partitions or user devices, and 2 RAID devices:* /dev/md126 with 465.76 GB, not encrypted, type RAID1 (no info for chunk size, parity or file system)* /dev/md127 with 2.2 MB, not encrypted, RAID_UNKNOWN (no info for chunk size, parity or file system)I didn't try to do anything in the RAID part because I wanted to preserve Win 7, but I dared to add a partition in the "hard disk" (sda) and I get an error: "the disk is in use and cannot be modified".

The behavior of Ubuntu 9.1 x64 installation is much alike.I have googled with every keyword combination I remembered, but I can't find anything that gives me a clue to what may be happening.I have already tried the 3 SATA configurations (the IDE that works with the installed Win 7, AHCI and RAID), but the result is always the same. Now the strangest thing is that fdisk and parted correctly identify the partitions. As far as I remember, parted isn't able to do modifications and fdisk says that the boundaries of the first, tiny partition, doesn't match the number of cylinders (or something like it). However, I was able create a partition with fdisk on the empty space and format it, delete it again and repeat the process a couple of times with no errors. The partituions are signed as msdos.

GParted from Ubuntu also shows the partitions, but I didn't try to do any modifications, namely because I don't think that it can solve my problem and I don't want to risk installing windows again.The hardware is brand new, a Asus M4A785Td-V Evo with an Amd Phenom II X4 965 and a WDC-WD5000ACCS-0 500 Gb HD. My lazyness made me asking the guys from whom I bought it to install Win7 Ultimate 64 in a NTFS partition, leaving half the disk untouched.y assure me that it is a "plain vanilla" ("next, next, next") installation . I guess I could try to see if I could do the partition setup in the "RAID" part of the Expert partitioner, but I have strong doubts that it solves the problem and it would be quite boring to conclude that I ruined the windows installation for nothing.

View 7 Replies View Related

OpenSUSE :: Unable To Setup Corepath For Smbd: Permission Denied

Jun 6, 2011

I installed samba em my opensusse and i have fallows error: Unable to setup corepath for smbd: Permission denied

View 1 Replies View Related

Debian Configuration :: Setup PATH Environment Variables?

Jan 8, 2011

I edited /etc/profile to look like:

# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
if [ "`id -u`" -eq 0 ]; then

[code]....

When i type env, it just shows: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin It also shows JAVA_HOME, CLASSPATH and others were set up. Trying to get updatetool in glassfish usable for any user and during any session. I did the export command in a shell, and it worked, but not after closing the session. how to do environment variables.

View 3 Replies View Related

Ubuntu :: Setup Jde With Emacs - Find My Jdk Path And Verison To It?

Feb 2, 2011

How do i setup jde with emacs and how do i find my jdk path and verison to it?

Here the link i try to found.

[url]

View 1 Replies View Related

Networking :: Setup Multi-Path Route Iptables ?

Jun 14, 2010

Here's my scenario:

I want it so any inbound traffic from dsl goes back out the dsl and same for rogers. I've been searching and playing with many docs with no luck.

Anyone know how I do this? The multiple routes are on the same device br0. (which I think is causing all my havoc)

View 1 Replies View Related

Red Hat :: Setup User's PATH Env When Sudo Command In RHEL5 ?

Dec 16, 2008

In RHEL5, the PATH of root is /sbin and /usr/sbin...., the PATH of common user has not /sbin or /usr/sbin, how to give the /sbin and /usr/sbin to a common user when he run command which sudo?

View 3 Replies View Related

Ubuntu Installation :: Grub-setup: Warn: Your Embedding Area Is Unusually Small. Core.img Won't Fit In It

May 3, 2011

I would like to backup my entire Ubuntu installation (/boot, swap and /) at /dev/sda (4GB) to /dev/sdb (10GB).I recreated the exact partitions on /dev/sdb, formatted and cp -rp all the files over.For /boot, I used

Code:

dd if=/dev/sda1 of=/dev/sdb1

It didn't boot successfully as the system kept rebooting. I then tried to install grub onto the MBR and boot partition (mounted at /mnt/tempboot).

Code:

grub-install --force --no-floppy --root-directory=/mnt/tempboot /dev/sdb

But I get an error:

Code:

grub-setup: warn: Your embedding area is unusually small. core.img won't fit in it.

Anyhow, since I forced grub-install, I believe the grub is installed. I rebooted the system and I get a grub prompt:

Code:

grub>

Grub seems to not find my grub.cfg but it is present.

View 1 Replies View Related

General :: Difference Between PATH=$PATH:$1 & PATH=$1:$PATH?

Jan 16, 2011

I found the following function in /etc/profile file.

[Code]...

1. I dont undestand what "if ! echo $PATH | /bin/grep -qE "(^|:)$1($|:)"" this if statement actually comapres??

2. Also what is the difference between PATH=$PATH:$1 & PATH=$1:$PATH

View 14 Replies View Related

Networking :: Fedora Core 10 - Unable To Connect To Internet

May 19, 2010

I use Windows7 on my laptop. I have got the following version of VMware Server installed on it.
**VMware Infrastructure Web Access Version 2.0.0 Build 122589**
**VMware Server Version 2.0.0 Build 122956**
I am running Fedora Core 10 on VMware, but Fedora is not able to connect to the Internet. However, when I try to ping google.com, it works fine. However, if I try to open google.com in mozilla-firefox, it gets stuck at "Connecting to google.com" and then finally times out. Similarly, yum also gets stuck.

Logs
[root@prats ~]# ifconfig .....
[Errno 4] IOError: <urlopen error (101, 'Network is unreachable')>
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again
You have mail in /var/spool/mail/root
[root@prats ~]#
// Prats

View 15 Replies View Related

Hardware :: Unable To Boot Any Flavour On My Core 2 Duo,geforce Gts250 And 946giz

Jul 3, 2009

Every linux i try to boot whether its a live cd or a complete dvd dvd installs and then fails to boot latest i tried mandriva spring edition 2009 i have a portable usb drive in which i install my linux everytime its a seagate free agent go i always used it for my linux which i frequently change i am not able to boot into any linux since i installed a graphics card xfx geforce gts 250 in my system there is a kernel panic whenever i try to boot something

sometimes its like:

Either of them for any given flavor. i have tried too many installations

View 14 Replies View Related

OpenSUSE Hardware :: Unable To Add USB Printer Via The YaST2 Printer Configuration Setup Tool In 11.3

Aug 26, 2010

I am unable to add my USB printer via the YaST2 Printer Configuration setup tool in openSUSE 11.3. The printer, a Dell Color Laser 1320c, was last used with openSUSE 11.2, and setup was entirely uneventful. No driver is provided by Dell, so I used the Fuji Xerox DocuPrint C525A Linux driver. The problem: To add a print queue in 11.3, a Connection must be specified (parallel, USB, network, etc). However, the configuration wizard fails to show the presence of the USB print device.

[Code]...

This printer was working just eight weeks ago under 11.2, and 11.3 is obviously able to detect its presence and identify it correctly. I feel certain the solution is simple, but I haven't found documentation that provides the answer.

View 7 Replies View Related

Ubuntu :: Run Dual Core - Crash - Single Core Runs Perfect

Apr 1, 2011

i am running gigabyte GA-M68M-S2P and AMD sempron 2.7. the problem is when i try to run dual core. it will boot and run for 2mins then it crashes. single core runs perfect.

View 6 Replies View Related

Fedora Installation :: Dual Core Only Showing Single Core On F14?

Nov 3, 2010

I just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:

processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4

[Code]....

View 2 Replies View Related

Ubuntu Installation :: Dual Core Support Core 2 E8500 Out Of Box?

Feb 14, 2010

Just a quick question. Does Kubuntu Karmic support core 2 E8500 out of the box or do you need the SMP kernel?

View 3 Replies View Related

Programming :: Multi-core Support - Control On What Core Will A Thread Run

Oct 31, 2010

Is there any Linux API that will let me control on what core will a thread run? If not, do I have to use assembly language?

View 2 Replies View Related

Ubuntu Installation :: JDK - Set The Path - Unable To Run A Single Program

Jun 3, 2010

I have downloaded the jdk-6u20-linux-i586.bin from their website. I also read the instruction given to install jdk manually but i was not able to run a single program. Can someone give a step by step instruction to install jdk and also tell me how to set the path so i can easily execute the programs.

View 9 Replies View Related

Ubuntu :: Unable To Set Environmental Variable (PATH) From Script

Jan 21, 2011

I am Just trying to set the Environmental variable using a script file and my code is as follows:

#!/bin/bash
echo $PATH
PATH=${PATH}:/opt/bin
export PATH
echo Environmental Variable path is Set
echo $PATH

When I am running the above script, from the last line "echo $PATH" I am getting that /opt/bin has been appended to the PATH but again when I am typing echo $PATH in the terminal I am not getting the newly appended path.

View 3 Replies View Related

Debian :: Wheezy Only Recognizes 1 Core Or Dual Core CPU?

Sep 7, 2011

I have now installed Wheezy on two different hard drives and in each case it seems only one CPU of my dual core CPU computer is recognized. System Monitor, Gkrellm and lscpu show just one when prior to the new install the old Wheezy showed both CPU's. I have put the hard drive into two other computers with dual core CPU's and all show just one CPU.

Interestingly System Profiler and Benchmark (hardinfo?) > Devices > Processors now show a large amount of processor infomation when with the old Wheezy I would only see both CPU's listed and nothing else.

View 14 Replies View Related

Ubuntu :: Lucid Lynx - Dual Core - One Core Always At 100%

May 15, 2010

I've a Compaq CQ61 laptop, and i noticed that one of the cores is always at 100%.

I didn't check the duration of the battery but surely it will "eat" my battery in a hurry

View 1 Replies View Related

General :: Only One Core Of Dual Core Processor Are Working

Mar 14, 2011

I recently read in a forum that by default the Linux kernel only activates one of two cores in a dual core processor. Searching online gave one option to find out and that was the mpstat command. I therefore ran the command and got the following output.As the result says, it shows only 1 cpu. I was wondering what I could do to activate both cores in my machine, and whether doing so was going to cause me any problems.

View 14 Replies View Related

Programming :: Get Process Running CPU Core And The Utilization On That Core?

Apr 27, 2010

Assume someone bind a particular process to a particular CPU core(In multi core machine) by using sched_setaffinity() like functions. Then how we can get that process running core id and CPU core utilisation of that process on that running CPU core(Pragmatically or by a Linux command)?.

View 5 Replies View Related

Fedora :: Acroread Unable To Locate Theme Engine In Path

Oct 20, 2009

I installed acroread on my 64-bit Fedora 11 and when I try to run it, I receice the message,

Quote:

HTML Code:

Quote:

View 3 Replies View Related

General :: Unable To Create A File In Specified Path In System / Enable This?

Jun 8, 2011

I am unable to create either a file or a directory in a specified path in Linux.
I am getting the error "No space left on device".
I have checked with df -k and df -i. Free disk space is 28 % and free inodes are 28 %.
What else could be the reason?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved