Networking :: Unable To Use Atheros Wireless Card On Fedora 14
Nov 7, 2010
This morning I installed Fedora 14 on my laptop. During the setup, I was able to configure the wireless connection and use it to install additional software from the FreshRPMs and Livna repos. When the install was completed, I was surprised to find the wireless not working. When I click on the NetworkManager icon at the bottom right corner, I see "Wireless Networks" Under that it says "device not ready" and it is greyed out so it cannot be click on.
Running lspci -vnn returned
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
View 3 Replies
ADVERTISEMENT
Jun 29, 2011
I am using ubuntu 9.10. Kernel version is 2.6.31-14-generic. I couldnt find driver for Atheros wireless card which shows in 'lspci' 0c:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
View 9 Replies
View Related
May 30, 2010
I've installed it no problems on my desktop and I really love it. Now I'm trying to install it on my Satellite and I'm having a couple of problems. When trying to connect to my wireless network, I can see my network, but it will just keep asking me for my WEP. I've confirmed that there is nothing wrong with the network or the password I've provided. Sometimes when I boot up, the network manager just says that the wireless networks are disconnected and can't find any. The wired connection always works just fine.
Here are the system specs:
Toshiba Satellite M45 S169
Ubuntu 10.04 Lucid Lynx LTS Fresh Install
Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
Kernel driver in use: ath5k
Kernel Modules: ath5k
View 3 Replies
View Related
Apr 7, 2011
I want to load Atheros wireless card to ubuntu linux OS having kernel 2.6.32.21. I have loaded the atheros driver and I observed the following log messages when card was inserted.
[ 55.732223] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 55.732294] pci 0000:04:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 55.810152] ath5k: disagrees about version of symbol ieee80211_free_hw
[code]....
My suspect was the driver was 2.6.35.1 kernel based i may need to update my kernel, but i have other laptop having 2.6.32-21 kernel and this card works fine.
View 2 Replies
View Related
Aug 12, 2009
installing my wireless card Atheros AR9285.I have tried to get it working with both compat wireless - Ath9k driver but I dont know exactly how to do.I have also tried to get it to work with ndiswrapper, but it is really tricky because nothing is available in centos like precompiled ndiswrapper.I used to work with Arch Linux so everything in Centos is totally new to me and I don�t understand a thing:I need to get it to work as soon as possible.What I have read the should go to just "activate" the ath9k driver with my card and it would work,
View 3 Replies
View Related
Jan 5, 2010
I'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
View 3 Replies
View Related
May 10, 2010
Ok, so I upgraded my acer aspire one to the new Ubuntu 10, and at first everything was working fine, except the audio. Now, for some reason, my wireless and ethernet ports have died. I can't get online by either method. I can do ifconfig <device> up and it will show up if i do iwconfig or ifconfig, but the wireless isn't associated with the AP. Currently I'm trying to load some drivers for my atheros card, and we'll see how that works outReally I was wondering, how come the modules don't load at boot time, and how can I fix this? I've been a Linux user for quite sometime, however I've been more of end user
View 1 Replies
View Related
Jan 15, 2011
I can't post messages, I think something is wring with my internet.Anyway, I'm gonna copy paste what I've been trying to say...I just bought the TP-LINK Model No. TL-WN821N. It's an atheros. And I was wondering where can I find the drivers for Linux. It only includes drivers for Windows.
I don't have much experience with networks,I found this website,
http:[url]......
I got stuck in the patch section, I don't know what they are trying to say. They are using
diff -urp compat-wireless-2009-02-22_AR9170_230209/drivers/net/b44.c compat-wireless-2009-02-22_AR9170_230209/drivers/net/b44.c
They are comparing the same file, there is some code they are showing but I don't know what they want me to do.
View 9 Replies
View Related
Mar 28, 2010
I have for 2 months Toshiba Satellite A 500-18Q (Core Duo, Windows7 pre-installed). I have just wifi internet in my home, with Windows7 it works perfectly and automatic. However, my fresh- installed Fedora12 cannot see any wifi at all. I my NetworkManager I can see a single line with "eth0" which seems to refer to a normal (cable) connection. How to activate wifi? Just add a new line with eth1 and Wireless connection? Or I need to install some drivers?
this is output from my terminal:
# lspci
01:00.1 Audio device: nVidia Corporation Device 0be2 (rev a1)
0e:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
[code].....
View 2 Replies
View Related
Jun 16, 2010
I have been running F13 since it came out, with the wireless working fine since I got it working (using the RPM Fusion repository, broadcom-wl-5.60.48.36-1.fc13). Since I updated software (without reading what was to be updated), yesterday, I am unable to even find wireless networks, although I am, as you can see, able to access through eth0 It is not a hardware problem, as I can not only find them, but access them on Ubuntu 9.10 live disc. Below is my lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[code].....
View 1 Replies
View Related
May 13, 2010
I am trying to get the Dell 1395 (Broadcom) wireless card to work on my PC and having a nightmare. I am certain the bulk of the reason is my inexperience with Linux but all the same it is causing me no end of problems.I have found the following sites which suggest ways to get it working
[URL]
Unfortunately I can't get either method to work on my Fedora 11 installation. I don't mean that I complete the steps only to find it doesn't work, I mean I can't even complete the required steps because I appear to be doing something wrong or be missing a crucial command tool.When I try to run the broadcom method I get as far as the make (or make clean) commands.
The make clean results in:
Code:
KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd` clean
make[1]: gcc: Command not found
make[1]: Entering directory `/usr/src/kernels/2.6.30.10-105.2.23.fc11.i586'
[code]..
If I try the other method I get into problems when I get to the ndiswrapper section as the install can't find ndiswrapper-common.
View 6 Replies
View Related
Aug 12, 2010
I have a Acer Revo R3610 nettop on which I installed oS11.3. It has an Atheros AR5001 wireless network adaptor.I'm getting very bad latency and throughput on with this card. In comparison my Thinkpad with Intel card achieves at least 10 times the throughput from the same location. Also when I boot my wifi will come up authenticate and then a few seconds later disconnect and reconnect. I've tried updating the kernel to 2.6.35 as one of the fixes was to improve the performance of the ath5k driver. I'm using wpa2 authentication.
Here are some details:
Code:
mediacentre:~ # /sbin/lspci -nnk
00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1)
Subsystem: Acer Incorporated [ALI] Device [1025:0222]
[code]....
Is there anything else I paste that will help determine the cause of the bad throughput. Browsing the web or copying files across the network is bordering unusable.
View 9 Replies
View Related
Jul 27, 2010
I've been trying to get Security Spin up and running (after having tried unsuccessfully with knoppix STD). I need to be able to connect to my home network, or hell any wireless network.I've tried using iwconfig wlan0 as well as the options in the Network Configuration panel as well as other related panels. I'm able to change and set up profiles for the wireless card, but not to activate them. The button just isn't clickable.If it helps, I'm running Security Spin from a unetbootin usb drive. The wireless card is identified by the system as "Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection" .
View 2 Replies
View Related
Nov 12, 2010
I've been trying to install the network adapter for the ar9285 driver using compat-wireless-2.6.32.16.tar.bz2 found at [URL] The commands I run after extracting are:
cd ~/Desktop
cd compat-wireless*
scripts/driver-select ath9k
Then after typing scripts/driver-select ath9k. This happens:
Processing new driver-select request...
Backing up makefile: Makefile.bk
Backing up makefile: drivers/net/wireless/Makefile.bk
scripts/driver-select: line 73: perl: command not found
[code]...
View 1 Replies
View Related
Nov 3, 2010
I'm facing problems with Fedora13 and the AR9285 wifi card... the connection is just too slow, and the wired connection works fine. I just figured out that a lot of VAIO users (so am I) were in the same situation, and solved their problem by downloading ath9k drivers from linuxwireless.org. Fine, I did it! That's what I found :
Quote:
Building and installing
cd /path/to/compat-wireless-2.6.32-rc5
./scripts/driver-select <driver-name>
make
sudo make install
...but make is looking for source files in /usr/src/kernels/2.6.34-7-61.fc13.x86_64/build/ , which doesn't exist! The /usr/src/kernels/ folder is just empty. I also found something about the fact that Fedora13 didn't came with kernel's source files... So how can I install that driver? (I didn't find the package via yum...)
View 5 Replies
View Related
Sep 2, 2009
I am using Ubuntu 8.04 and when I open up my network settings, It shows my ethernet card and my modem but my wireless card doesn't show up. Under "Hardware Drivers" it says that my driver for my wireless card is a "proprietary driver" and that there is no driver I can get for it for Linux. Is there any way that I can get my wireless card to work? I tried going to the HP website and downloading a driver for it, but all of the drivers only work for Windows....
View 2 Replies
View Related
Jun 26, 2009
I have installed centos 5.2 on my acer aspire 5610z, but I do not recognize the wireless card atheros, what should I do?
View 1 Replies
View Related
Jun 15, 2011
I have onboard Atheros Communications L2 100 Mbit Ethernet Adapter, and I am not able to install the drivers of it. Following is the output of command lspci -v 01:00.0 Ethernet controller: Atheros Communications L2 100 Mbit Ethernet Adapter (rev a0)
Subsystem: Elitegroup Computer Systems Unknown device 2048
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at feac0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at feaa0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
[Code]...
View 1 Replies
View Related
Jan 12, 2011
A wifi card with the ath5k driver used to work properly until a couple of weeks ago. Now, if I ping the router the response times sometimes are okay but often fluctuate into the range of many hundreds or thousands of milliseconds. Occasionally the connection breaks down entirely.My laptop, which uses a different card, works fine (typical ping response times of 2 ms), so its probably not the router which is faulty.I use opensuse 11.3 x86_64, currently with the 2.6.34.7-0.7 desktop kernel and knetworkmanager
View 1 Replies
View Related
Mar 25, 2009
I like to test my network often. Until recently, I've been doing so on my old Ubuntu 6.06 laptop... the problem is It's too slow (1.06 GHz single Core ), and old, (designed for Win 2000) to really be effective any more. So, recently I bought a new laptop...one with a Dual core Processor, and twice the speed. Anyway, I'm running Fedora Core 10 X86_64 on it. My problem is as follows:
Although I do have MadWifi installed, for some reason, I still can't put my Atheros based Netgear WPN511 into monitor mode. (in the Network configuration window, it says "Atheros Communications Inc. Atheros AR5001X+" I'm not sure what it means but I'll put it in in case it helps) does MadWifi not work with Fedora? if not, is there a Fedora 10 (X86_64) alternative?
View 8 Replies
View Related
Apr 19, 2015
I am using an atheros based wireless card. I am able to scan for and find networks but can not resolve addresses:
procyon@debian:~$ sudo ping -I wlan0 8.8.8.8
ping: Warning: source address might be selected on device other than wlan0.
PING 8.8.8.8 (8.8.8. from 10.0.0.7 wlan0: 56(84) bytes of data.
From 10.0.0.7 icmp_seq=1 Destination Host Unreachable
From 10.0.0.7 icmp_seq=2 Destination Host Unreachable
From 10.0.0.7 icmp_seq=3 Destination Host Unreachable
From 10.0.0.7 icmp_seq=4 Destination Host Unreachable
From 10.0.0.7 icmp_seq=5 Destination Host Unreachable
From 10.0.0.7 icmp_seq=6 Destination Host Unreachable
View 2 Replies
View Related
Mar 3, 2009
I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
View 5 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
May 15, 2010
i installed ubuntu on my friends laptop but when he tries to connect to his network and enters his wep key the box disappears for a few second and comes back again...The card is Atheros on a Toshiba laptop and it is detected , it finds the networks but the wep key is rejected every time without a error
View 5 Replies
View Related
Nov 17, 2010
I have used Ubuntu without trouble for quite some time now on my computer (maybe 2 years; recently upgraded to 10.04) and have just bought a new computer for the office. When I install 10.04 on the new computer it doesn't seem to recognise the lan card, an atheros AR8151 onboard card (on a GA-G41MT-S2 mobo).
p.s. phrases such as 'build-essentials', 'sudo' and '.tar.gz' files don't mean anything to me (except the last is a bit like a zip file I think).
View 1 Replies
View Related
Jan 24, 2010
I can't connect to the Internet through my wireless card. Plus, it's disabled and I can't enable it. It's grayed-out in the Network Manager on the top panel.I ran this code in a terminal:
Code:
*****@ubuntu:~$ sudo lshw -C network
[sudo] password for ******:
[code]...
View 9 Replies
View Related
Jun 25, 2010
I am currently using Ubuntu 10.04 Lucid Lynx. Although it has worked fine for the past couple of weeks, I have recently encountered a problem with my wireless card. It is an Atheros AR928X card on a Toshiba satellite U405D-S2874 model laptop. Recently, I attempted to put the computer into suspend mode for the first time. The computer failed to wake up, and I performed a hard reboot. After this, everything seems to work except for the wireless card. I am now unable to connect to any wireless network with my laptop, and the wireless manager doesn't seem to be working either.
View 2 Replies
View Related
Aug 10, 2010
I have recently installed Ubuntu 10.04, and today the wireless connection has started to become spotty. The networks menu shows no wireless entries when they were there the day before. Again I have the Atheros AR5001 wireless card, my network is WPA2 and is 802.11g
View 1 Replies
View Related
Jul 17, 2011
have a toshiba satellite L745 running Lucid Lynx I need drivers for the Atheros AR8151 ethernet card. Every post I have read on installing the driver give links to Atheros but they are all broken. Does anybody know where I can download driver?
View 9 Replies
View Related
Sep 1, 2011
I am not exactly sure whats wrong here, but Ubuntu 11.04 reports that the Atheros card for my laptop ( AR9287) is disabled. When I try to turn it on using fn+F3 it does not do anything. I looked around and found out about RF-Kill, tried doing the sudo rfkill unblock 0 and it did not work, I attempted that with both 1 and 0 as I also have a gigabit lan card. Though I could see the block status of the eth0 card changing, the Soft block of the wireless card did not.
I have also tried unblocking the pci_ath card in modprobe.d and that also did not work after restarting.
I am using a Acer Aspire 7551g with a Atheros wireless controller. Running Ubuntu 11.04 x64 AMD
View 2 Replies
View Related
