Networking :: Save Routing Information To A Configuration File?

Mar 9, 2011

All routing settings made with the ip tool (route command) are lost when the redhat server reboots.How to save routing information to a configuration file?

View 2 Replies


Ubuntu :: Music File Information Editing Doesn't Save

Apr 5, 2010

I have some japanese music files stored on a flash drive that the titles of which are in japanese originally. While in the flash drive, when I go to Properties -> Audio, the title is written in japanese. It does not allow me to edit the file, no matter what permissions I have on it, therefore I can't change the name to english. So, I tried Rhythmbox instead, and transfered the file there. I could change the name, however there is STILL a huge problem.

I have around 300 japanese music files, all of which have to be renamed into english.
I did all this for all of them in Rhythmbox, and clicked "quit" when I was done. When I came back to transfer the files to my MP3 player like usual, I opened Rhythmbox, and...

ALL OF THE FILES WERE STILL IN JAPANESE! It didn't save any of the work I did on editing them. But, I calmed down and thought "oh, you can save playlists! I am sure that if I save them on one, it will keep the edits!" I did this, and it saved nothing. It took me 2 hours to finish the renaming, just to find out that it can't save information edits at all.

View 9 Replies View Related

Ubuntu Networking :: Set Up Router With Tomato Firmware To Save The Bandwidth Usage Information?

Mar 20, 2010

I'm trying to set up my router, with tomato firmware, to save the bandwidth usage information. One of the 'save history' choices is "CIFS" ... I'm lost as to how to create this save area..anyone able to give me a link to a 'how to' ...or if you've done it, perhaps a step by step?

View 1 Replies View Related

Fedora Networking :: Routing Configuration - Cannot Ping Between PC1 And PC2

Feb 3, 2011

I want to implement routing using fedora 14. The following is how I arrange my computers -

And the following are the configuration -
PC1 : (Tiny Core Linux)
eth0 (netmask

eth0 (netmask
eth1 (netmask

PC2 (Tiny Core Linux)
eth0 (netmask

On the ROUTER I have set the ip_forward=1 and eth0.proxy_arp=1 and eth1.proxy_arp=1
then I run the following command :
route add -net gw dev eth0
route add -net gw dev eth1

On PC1 I executed the following :
route add -net gw dev eth0
and for PC2 I run the following
route add -net gw dev eth0

After doing those things, I can't ping between PC1 and PC2... but both can ping the router...

View 14 Replies View Related

Networking :: Insert Routing Data Into The Routing Table Doesn't Work?

Apr 6, 2010

I have a firewall, this consists of three NIC's:

Code: eth0[] eth1[] and eth2[]

I am trying to ping eth0 from eth2, but I am not able to succesfully get a response from pinging the device, I am using:

Code: ping -I eth2

I have tried to insert routing data into the routing table, but it still doesn't work

View 2 Replies View Related

Debian Configuration :: Ifconfig Wasn't Displaying The Same Information That Resides In /etc/network/interfaces File

Aug 14, 2011

i recently started sockets programming. In the process i began to look for relevant network information about my computer and realized that ifconfig wasn't displaying the same information that resides in my /etc/network/interfaces file. On the interfaces file my IP address is for interface eth0 but ifconfig displays I was under the impression that ifconfig got its information from the interfaces file but clearly doesn't. I tried re configuring the device with ifconfig and then disabling and re enabling the device with ifdown and ifup so that the device updated its information but it didn't.


View 3 Replies View Related

Ubuntu Networking :: Put Proper Information Into Fstab File?

Feb 24, 2011

I have a working network Ubuntu 10 Win7 (thanks to you guys on this site).

My last hurdle is how to mount folders or disks from Win7 onto Ubuntu.

I used a tutorial, and got fstab installed I think...

Where do I get the information to PUT IN fstab and WHERE to put it?

Here is my fstab file code...

View 2 Replies View Related

Ubuntu :: Kstars - No List Of Telescopes In Telescope Wizard And Can't Save Information Under Properties

Jul 2, 2010

I'm having problems with Kstars and would like to know the proper place to post questions or if there is a forum just for the Kstars program. I can't find much info on the net. If I remember right it worked in Ubuntu 8 but I've upgraded to the latest and some options in Kstars are not working now. In a nutshell, some of the problems are:

1: Help not working. I get....Could not Launch the KDE help center: Could not find service 'khelpcenter'
2: In telescope wizard, there is no list of telescopes.
3: I cant save my telescope information under properties.

As I'm just learning this stuff, it could be a bug but not sure, so please point me in the right direction for help. I'm running dual boot on a HP laptop. Windows XP and Ubuntu. I have reformatted the drive and installed everything new for a clean slate.

View 2 Replies View Related

Ubuntu :: Document Viewer Doesn't Save Information To Fillable Pdf Properly / Solve This?

Dec 20, 2010

I am trying to fill out this PDF form:

In Document Viewer, I can click on the fields and type in them, but after spending about 2 hours writing descriptions of courses, I saved it and... it closed the document I was working on, and loading the document I saved resulted in empty fields that could no longer be edited at all - clicking on them did nothing - it looked like a blank form, except it was also broken.

Is there any way I can actually fill in this form...

View 4 Replies View Related

CentOS 5 Networking :: Determining IP Information For Wlan0...SIOCSIFFLAGS: No Such File Or Directory

Oct 18, 2009

i wanted to learn linux, so i just installed Centos on a thinkpad x200. my wireless will not work. when i try to activate it i get this error:

Determining IP information for wlan0...SIOCSIFFLAGS: No such file or directory
SIOCSIFFLAGS: No such file or directory
# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)


View 5 Replies View Related

Debian Configuration :: Policy Routing Squid On VPN

Jan 22, 2010

I'm having trouble to configure my debian (2.6.26-2-686) with some routing tuning. In fact, I have a VPN provider. I want my Squid Proxy use this VPN provider and I have to use policy routing because my ISP forbid IP spoofing.

View 2 Replies View Related

Debian Configuration :: Routing With Interface Aliases?

Apr 3, 2010

I'm facing a strange networking problem here. I'm running Debian Lenny in an OpenVZ container and my network setup is as follows:

link encap:Local Loopback
inet addr: Mask:
inet6 addr: ::1/128 Scope:Host


View 4 Replies View Related

Debian Configuration :: Routing - Forward All Traffic To An Ip To Another Ip?

Jul 25, 2010

I need to be able to do the following: Physical Router located at On Ubuntu 10.04 Lucid machine:

eth0 with static ip
eth1 with static ip
eth2 with static ip

Associate a virtual address to eth1 with an entirely different network address such as Do the same (virtual address) for eth2 -- e.g. In the application:

register phone number A at (The application will automatically use eth0 for this)
register phone number B at
register phone number C at

Somehow forward all traffic (including the register request) sent to to as if the register had been made directly to In other words, the app "sends" registration and traffic to but then Ubuntu forwards it to (but the app does not know that). Similarly, forward all traffic sent to to the router at

Do the same for the reverse, forward all traffic that the router sends back to (eth1) to (within the Ubuntu machine) so that the app knows it is for phone B. Similarly forward all traffic that the router sends back to (eth2) to so that the app knows it is for phone C. Thus, the application believes that it is registering at 3 completely separate routers on 3 completely separate networks via 3 separate network interfaces but in fact is really registering all three to the same router (but does not know that). Similarly, the router believes that it is receiving 3 separate registrations because it receives each registration request and traffic from 3 separate interfaces and thus 3 separate mac addresses (i.e., of eth0, eth1, and eth2). Traffic sent to and from the router for each of the 3 phone numbers (via eth0, eth1, and eth2) are not mixed because the translation happens in both directions.

View 10 Replies View Related

Software :: Save An Image Of Windows Results In Partimage Freezing At The "NTFS Information"

Aug 13, 2009

I have a dual-boot windows and Suse linux 11.1 setup. I can save and restore a linux image. Trying to save an image of Windows results in Partimage freezing at the "NTFS Information" window before the "save partition to image file." I have two SystemRescue CDs of versions 1.2.2 and 1.2.3 I have two computers one with Windows 2000 and one with Windows XP I have defragmented the partitions several times over. Users are told that use with "NTFS is experimantal". Several up-beat webpage tutorials also mention this but go on to say how marvellous it works for them. Naturally, such sites do not mention problems. This is the province of the forums. I have found nothing that relates to my problem though. Hence my post appealing for any guidance on offer.

View 7 Replies View Related

Ubuntu Networking :: Squid Error - Unable To Open Configuration File / No Such File Or Directory

Jan 6, 2010

my squid show like this when i try create swap directory


View 2 Replies View Related

Server :: Network Information Service Configuration?

May 17, 2010

How do you setup Secondary or Slave Servers in NIS? Will the domain of the slave server be the same as the Master Server?

View 1 Replies View Related

Debian Configuration :: AQemu + USB (squeeze) - Could Not Get USB Information From System

Oct 15, 2010

Running AQemu says me the following:

Could Not Get USB Information From System!
USB Support is Disabled.
Add Support proc FS TO YOUR Kernel.

View 1 Replies View Related

Debian Configuration :: SSL - Can't Input Information Such Country Code?

Aug 28, 2011

i followed a Tutorial about configuring apache to have HTTPS Protocole , but since i ask for a certificate , i can't input information such country code etc , i'm runing this configuration on Webmin , i'm using Debian of course so how can i input the code ?

View 1 Replies View Related

General :: Move All The Information & Configuration Of DNS02 To The New Server?

Apr 5, 2011

We do have primary & backup DNS both are running in Linux. I'm planning install the 3rd DNS & move the DNS02 to this server(DNS03)& remove the DNS02 later. Ho can I do move all the information & configuration of DNS02 to the new server? configuring the DNS03 & removing DNS02.

View 13 Replies View Related

Ubuntu :: Find The Dependent Information Like That In The Control File Of .deb File?

Nov 17, 2010

As I know, lly includes a control file. Takelibfreetype6_2.3.9-5ubuntu0.4_i386.deb for example, its control file includes the following content:

Package: libfreetype6
Source: freetype
Version: 2.3.9-5ubuntu0.4


View 2 Replies View Related

Ubuntu :: Routing Protocol File Not Available But The Installation Is Successful

Jan 22, 2010

I had installed ns-2.33 on ubuntu 9.04 using synaptic package manager. Now i need to edit routing protocol file in the Ns 2 folder. Wheni search for that file its not available but the installation is successfull.

View 2 Replies View Related

Debian Configuration :: WARING! Can't Find Hypervisor Information In Sysfs!

Mar 9, 2010

After each boot I find 2 occurrences of WARING! Can't find hypervisor information in sysfs!

in /var/log/boot. This box is running as KVM-host, so I am a bit worried about 'warings' like these...

View 1 Replies View Related

Ubuntu Installation :: Security Updates Clobber Configuration Information?

Jan 13, 2010

Why can't Ubuntu store configuration information in a way that it wouldn't need to be clobbered in order to apply security updates? For example, this mornings updates told me I had to choose between using a new version of smb.conf that's part of the security patches, stick with the old version, or let the update installer merge them. Of course, the first two choices have obvious drawbacks: why should I have to choose between losing all my SMB settings or refusing security fixes? So I chose the merge, which came back with "Conflicts found during three-way merge! edit `/etc/samba/smb.conf' and sort them out manually."

View 5 Replies View Related

Debian :: Iptables Cannot Save The Configuration?

Apr 28, 2011

I am configuring the iptables in the debain squeeze and then running the: iptables-save

View 4 Replies View Related

Debian :: Can't Save Network Configuration

Jan 18, 2010

I'm opening up Network and it asks me for the root password. I enter it and the program comes up. I enter a static address for both eth0 and eth1.

I don't see a Save button. Eventually I get out of the configuration tool. The next time I run the tool, my static addresses have not been saved.

View 9 Replies View Related

Ubuntu :: Save Configuration As Default?

Aug 20, 2011

I've customized my ubuntu setup using many themes and icon packs and now have it just the way I like it but every time I create a new user account it resets to the default interface. Is there any way to save the current configuration I have (theme, icons etc.) as default?

View 3 Replies View Related

Networking :: Networking Routing \ Use The Terminal To Assign Server Eth0 A Proper IP Address?

Jun 8, 2010

i know exactly what i need to do, im just not familiar enough with command line to do it properly.i have 7 computers.the first 4 are connected to a router via wireless at one end of the house. of the last 3 only 1 will be able to access the router via wireless, so it needs to share it's one wireless connection via ethernet. this computer i'm going to call 'server'server will have two IP'swlan0 this connects to the router that has internet access.eth0 i intend to have the following settingsip: 255.255.0eth0 will connect to a second router, where the cat5 cable goes from the server, into the internet port of the router where i will define the router's static IP:IP: have then set the router IP for LAN handling as and all ethernet connections will have a 192.168.27.x IP.

so i need to know how to, without a gui application, use the terminal to assign server eth0 a proper IP address, and tell the server to take the connection it has and share it through eth0 to supply internet for the last 2 computers via ethernet.i had it set up in this way with a windows machine being the one that had the wifi access, but i'd rather have it setup for the ubuntu server to do this task. security is imperative for these 3 remaining machines, so just getting 2 more wifi adapters for a connection to the initial router isn't an option.the 2 that connect to server do so through SSH and though server IS connected via wireless it only makes outward connections through

View 1 Replies View Related

OpenSUSE Hardware :: Can't Save ALSA Configuration

May 10, 2011

I have just installed OpenSuse 11.4 with XFCE environment on my Acer Aspire 5738Z.

Everytime I boot, I need to configure manually the "capture device" with Alsamixer to change it from "micro" to "internal micro".

I tried to save the settings using alsactl store/restore as I do with Ubuntu, but it doesn't work. Every time I restart my computer, the capture is on "micro" again.

how to save the settings permanently ?

View 2 Replies View Related

Ubuntu :: Save Configuration / Setup For Later Install?

Mar 23, 2010

I run ubuntu 9.10 and i've set up my drivers/music player/themes/browser etc just the way i like them. However I now want to install XP and dual-boot. My hard drive is not partitoned, so I want to ask if there is a way to save my setup to use after installing XP.

View 5 Replies View Related

Programming :: Sed - Save Output To File With Filename From Content Of Another File?

Feb 28, 2011

My employer issues pdf files with everyones work schedules. I copy the content and save it as plain text in a file called unformatted (hope to be able to automate this step someday). Im working on a SED script that reduces unformatted to only display what I want to see and saves the result in a file Ive named formatted. After that I have to manually copy formatted and save it with that days date as a filename e.g. 2011-02-25 or whatever day is scheduled in the pdf, for use on a mobile device (Nokia N900). I noticed that the date occurs on certain lines in the file so I added a line like:

sed -n 's/^Date: (201[1-9])/([0-1][0-9])/([0-3][0-9]).*/1-2-3/p' < unformatted >theDate
That creates a file theDate with the date in it that I wish to use as the filename for this particular instance. So I would like to skip the file formatted all together and have the sed- script write to a new file using the content of the Date as a filename, but how do I make that happen? And of course it would be more elegant if I could skip the intermediate theDate file as well.

View 4 Replies View Related

Copyrights 2005-15, All rights reserved