Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
I successfully built the sources for 64 bit linux drivers from [URL].... on the 64 bit F14 machine: Linux localhost.localdomain 2.6.35.6-45.fc14.x86_64 #1 SMP Mon Oct 18 23:57:44 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux and got wl.ko:
i installed SLES 11 sp1 as guest on openSUSE 11.3 host, then change the adapter network from 'NAT' to 'Bridged Adapter', but when i hit start i got this error message: Failed to open a session for the virtual machine sles. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). Failed to attach the network LUN (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). but when run: sudo /etc/init.d/vboxdrv setup
I have a problem with loading the powersaving kernel module p4-clockmod.ko. When I try inserting the module (via modprobe or insmod) I get FATAL: Error inserting p4_clockmod (/lib/modules/2.6.31.8-mediaserver/extra/p4-clockmod.ko): Invalid module format The module has been compiled together with the kernel. Other modules load with no problem at all. I've tried recompiling the kernel (after re-installing the sources, make xconfig from scratch) - no avail. There's only one kernel source package installed. Searching the forum and google didn't yield a helping answer.
I'm having some troubles with nfsd in slackware-current. When I start the service, I get the following error messages: Quote:
WARNING: Error inserting sunrpc (/lib/modules/2.6.33-smp/kernel/net/sunrpc/sunrpc.ko): Invalid module format WARNING: Error inserting auth_rpcgss (/lib/modules/2.6.33-smp/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko): Invalid module format WARNING: Error inserting lockd (/lib/modules/2.6.33-smp/kernel/fs/lockd/lockd.ko): Invalid module format FATAL: Error inserting nfsd (/lib/modules/2.6.33-smp/kernel/fs/nfsd/nfsd.ko): Invalid module format
The mount fails from the clients with the error message: Quote: mount.nfs: access denied by server while mounting jupiter:/media/Backup A look at syslog from the server side gives: Quote: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel) mountd[28198]: getfh failed: No such device kernel: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel)
I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
module loads successfully; another is using (CC) and then creating the module by "make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules", this module gives the error message when it is inserted, .........
I've got a brand new Advantech USB 4761 Digital/Analog PC Lab card. They claim to run under Linux. The install, " dpkg -i advdaq_1.04.0006-1_i386.deb", was successful. But when I tried to modify and run their install script, "adv_load_template", I get this:./adv_load_templateinsmod: error inserting './modules/advdrv_core.ko': -1 Invalid module format insmod: error inserting './modules/usb4761.ko': -1 Invalid module format
I am trying to compile the Cisco vpnclient on my Opensuse 11.2 and (after some troubles) I got the module compiled and installed but when I try to load with insmod I got this error
I am able to use the vpnclient forcing the module with modprobe -f cisco_ipsec but I'd prefer to solve the 'invalid format' original problem. I 'googled' around and it seems related with this warning during vpn_install script "WARNING: Symbol version dump /usr/src/linux-2.6.31.12-0.2/Module.symvers is missing; modules will have no dependencies and modversions." I have these rmps:........
I am using reliance zte modem ac2726.i inserted the modem in my laptop and tried wvdialconf command and it was working.but when i type
Code:
modprobe usbserial vendor=0x19d2 product=0xfffd
command it shows the following error message
Code:
FATAL: Error inserting usbserial (/lib/modules/2.6.29.4-167.fc11.i686.PAE/kernel/drivers/usb/serial/usbserial.ko): Invalid module format But "cat /proc/bus/usb/devices","lsusb","dmesg" everything are working perfectly."Wvdial.conf" file also got configured perfectly.what can i do now?
A little background first: Wireless card: Broadcom BCM4312 Wireless driver used: [URL].... (and slackbuild variation of the same) GFX card: nVidia geForce 7150m I installed Slackware yesterday, along side my Ubuntu (yes yes, I use Ubuntu lol. I've been using it for about four years, I added Slackware to grub.cfg, using the OS prober, which added four menu entries. The first two caused kernel panic, the third worked, and I don't think I tried the fourth. (I'm pretty sure they were, in this order: generic, generic-smp, huge, and huge-smp). Using huge, I could not modprobe my wireless driver, I would get a "Invalid Module Format" error with wl, and when installing the nVidia drivers (from their site), I would get:
[code]....
I then booted using a menuentry my friend gave me, created my initrd, and everything worked fine, both graphics and wireless (mostly fine). So I upgraded to -current, kernel 2.6.35.10, and I started getting the same errors as before, 'Invalid Module format' and the same thing with the nVidia drivers, although this time, it happens regardless of if I use the generic kernel, or the huge kernel. I've done heaps of Google'ing around, and nothing I found worked.
I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.
OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!
now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more
We are using LPC3250 ARM9 and LTIB for building the Linux 2.6.27.8 We have written some code to access GPIO and was working earlier with opensuse 9.0 We now have fedora 11 32 bit 2.6.30.10-105.2.23.fc11.i686.PAE When we make the program we get following errors we are using GCC3.4.5
I am interested in using fortran and an external library called matio used to save arrays to matlab .mat files. I have installed the matio and matio-dev packages from synaptics but i cannot compile a code receiving an error Code: christos@christos-laptop:~/Desktop$ gfortran -o test test.f90 -lmatio -lz test.f90:2.13: USE MATIO 1
Fatal Error: Can't open module file 'matio.mod' for reading at (1): No such file or directory How can i load a module in order to use it in fortran through the GCC compiler?
i installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said
failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent /usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
I cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:
(EE) Failed to load module "vmwgfx" (module does not exist, 0) (EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d"
When opening gedit as a user I get the following message
Gkt-message: Failed to load module "'pk-gtk-module"
If I try to open gedit as root I get the same message but with other messages. These are shown in the attached file. gtk.txt
This is on an upgraded machine using the preupgrade method. The same has happened on two machines upgraded from F14 to F15 the same way. 64 bit systems.
How to clean this up so the messages do no appear?
After 2 months away from Fedora i am using it again, and used yum update to update stuff, everything was running fine, downloaded stuff, but 2 of the 666 stuff to install got error, here is:
for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).
so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:
Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:
Quote: sudo nano /etc/modprobe.d/blacklist.conf
blacklist vga16fb blacklist nouveau blacklist rivafb blacklist nvidiafb blacklist rivatv
I need to know I/O stats per process. When executed dstat give the bellow error message. dstat -M topio -d -M topbio Module topio failed to load. (No module named dstat_topio) Module topbio failed to load. (No module named dstat_topbio) CentOS release 5.3 (Final) uname -r => 2.6.18-128.2.1.el5 How to resolve the above error message
I'm running Fedora 12 LXDE spin on a netbook (Asus EeePC) and have successfully installed a wireless driver using ndiswrapper. The only problem is that every time I reboot, I need to use the "modprobe ndiswrapper" command to load the module.
Is there a way to load the ndiswrapper module during the boot process?
running the latest ubuntu 10.10 desktop i386i followed this guide for reference when building the updated driversall paths and references have been updated to reflect my version of the driveroriginal error during compilation:
DKMS make.log for rr174x-2.4 for kernel 2.6.35-22-generic (i686) Wed Nov 3 01:28:03 EDT 2010 make: Entering directory `/usr/src/linux-headers-2.6.35-22-generic'
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.